服務器性能測試?yán)髦畇ysbench詳解

更新時間：2024年12月17日 08:53:18 作者：心冰之海

bench是一個開源的、模塊化的、跨平臺的多線程性能測試工具,可以用來進行CPU、內存、磁盤I/O、線程、數據庫的性能測試,sysbench是基于LuaJIT的可編寫腳本的多線程基準測試工具,這篇文章主要介紹了服務器性能測試?yán)髦畇ysbench,需要的朋友可以參考下

前言

sysbench是一個開源的、模塊化的、跨平臺的多線程性能測試工具，可以用來進行CPU、內存、磁盤I/O、線程、數據庫的性能測試。sysbench是基于LuaJIT的可編寫腳本的多線程基準測試工具。

sysbench附帶以下捆綁的基準測試：

oltp_*.lua：類似OLTP的數據庫基準測試的集合
fileio：文件系統級基準
cpu：簡單的CPU基準測試
memory：內存訪問基準
threads：基于線程的調度程序基準
mutex：POSIX互斥基準測試

特征

提供有關速率和延遲的大量統計信息，包括延遲百分位數和直方圖；
即使有數千個并發線程，開銷也很低。sysbench每秒能夠生成和跟蹤數億個事件。
通過在用戶提供的Lua腳本中實現預定義的掛鉤，可以輕松創建新的基準測試；
可以也可以作為一個通用的Lua解釋，只需更換#!/usr/bin/lua用#!/usr/bin/sysbench在你的腳本。

安裝

安裝以Centos為例，其他版本或者mac請參考sysbench說明

1.下載安轉

wget https://github.com/akopytov/sysbench/archive/1.0.zip -O "sysbench-1.0.zip"
unzip sysbench-1.0.zip
cd sysbench-1.0
//安裝依賴
yum install -y automake libtool

2.編譯安裝

./autogen.sh
./configure
export LD_LIBRARY_PATH=/usr/include/mysql
make
make install

3.監測是否安裝成功

[root@guanbin-k8s-master ~]# sysbench --version
sysbench 1.0.19

測試

1. cpu測試

cpu測試主要是進行素?cái)?shù)的加法運算，我們的例子中，指定了最大的質數發生器數量為 20000

[root@guanbin-k8s-master ~]# sysbench --test=cpu --cpu-max-prime=20000 run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Prime numbers limit: 20000
Initializing worker threads...
Threads started!
CPU speed:
    events per second:   168.59
General statistics:
    total time:                          10.0027s
    total number of events:              1687
Latency (ms):
         min:                                    5.63
         avg:                                    5.93
         max:                                   66.09
         95th percentile:                        6.43
         sum:                                 9999.10
Threads fairness:
    events (avg/stddev):           1687.0000/0.00
    execution time (avg/stddev):   9.9991/0.00

執行時間大約為10秒（這個測試最好是兩臺機器進行對比測試，才能發現那個機器有問題）

2.對內存（memory）進行測試

測試是在內存中傳輸 10G 的數據量，每個 block 大小為 8K

[root@guanbin-k8s-master ~]# sysbench --test=memory --memory-block-size=8k --memory-total-size=10G run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Running memory speed test with the following options:
  block size: 8KiB
  total size: 10240MiB
  operation: write
  scope: global
Initializing worker threads...
Threads started!
Total operations: 1310720 (724931.70 per second)
10240.00 MiB transferred (5663.53 MiB/sec)
General statistics:
    total time:                          1.8045s
    total number of events:              1310720
Latency (ms):
         min:                                    0.00
         avg:                                    0.00
         max:                                   12.44
         95th percentile:                        0.00
         sum:                                 1441.61
Threads fairness:
    events (avg/stddev):           1310720.0000/0.00
    execution time (avg/stddev):   1.4416/0.00

totaltime為1.8045s

3.對disk 的IO測試

新建一個臨時目錄，并確保磁盤剩余空間足夠（--file-total-size不要超過剩余容量）

測試場景：16個線程，創建128個文件，總共占用磁盤空間10GB，測試磁盤讀寫效率

運行結束后要?jiǎng)h除臨時測試文件： rm -rf test_file.*

root@guanbin-k8s-master tmp]# sysbench --test=fileio --num-threads=16 --file-total-size=1G --file-test-mode=rndrw prepare
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)
128 files, 8192Kb each, 1024Mb total
Creating files for the test...
Extra file open flags: (none)
Creating file test_file.0
Creating file test_file.1
Creating file test_file.2
Creating file test_file.3
Creating file test_file.4
Creating file test_file.5
Creating file test_file.6
Creating file test_file.7
Creating file test_file.8
Creating file test_file.9
Creating file test_file.10
Creating file test_file.11
Creating file test_file.12
Creating file test_file.13
Creating file test_file.14
Creating file test_file.15
Creating file test_file.16
Creating file test_file.17
Creating file test_file.18
Creating file test_file.19
Creating file test_file.20
Creating file test_file.21
Creating file test_file.22
Creating file test_file.23
Creating file test_file.24
Creating file test_file.25
Creating file test_file.26
Creating file test_file.27
Creating file test_file.28
Creating file test_file.29
Creating file test_file.30
Creating file test_file.31
Creating file test_file.32
Creating file test_file.33
Creating file test_file.34
Creating file test_file.35
Creating file test_file.36
Creating file test_file.37
Creating file test_file.38
Creating file test_file.39
Creating file test_file.40
Creating file test_file.41
Creating file test_file.42
Creating file test_file.43
Creating file test_file.44
Creating file test_file.45
Creating file test_file.46
Creating file test_file.47
Creating file test_file.48
Creating file test_file.49
Creating file test_file.50
Creating file test_file.51
Creating file test_file.52
Creating file test_file.53
Creating file test_file.54
Creating file test_file.55
Creating file test_file.56
Creating file test_file.57
Creating file test_file.58
Creating file test_file.59
Creating file test_file.60
Creating file test_file.61
Creating file test_file.62
Creating file test_file.63
Creating file test_file.64
Creating file test_file.65
Creating file test_file.66
Creating file test_file.67
Creating file test_file.68
Creating file test_file.69
Creating file test_file.70
Creating file test_file.71
Creating file test_file.72
Creating file test_file.73
Creating file test_file.74
Creating file test_file.75
Creating file test_file.76
Creating file test_file.77
Creating file test_file.78
Creating file test_file.79
Creating file test_file.80
Creating file test_file.81
Creating file test_file.82
Creating file test_file.83
Creating file test_file.84
Creating file test_file.85
Creating file test_file.86
Creating file test_file.87
Creating file test_file.88
Creating file test_file.89
Creating file test_file.90
Creating file test_file.91
Creating file test_file.92
Creating file test_file.93
Creating file test_file.94
Creating file test_file.95
Creating file test_file.96
Creating file test_file.97
Creating file test_file.98
Creating file test_file.99
Creating file test_file.100
Creating file test_file.101
Creating file test_file.102
Creating file test_file.103
Creating file test_file.104
Creating file test_file.105
Creating file test_file.106
Creating file test_file.107
Creating file test_file.108
Creating file test_file.109
Creating file test_file.110
Creating file test_file.111
Creating file test_file.112
Creating file test_file.113
Creating file test_file.114
Creating file test_file.115
Creating file test_file.116
Creating file test_file.117
Creating file test_file.118
Creating file test_file.119
Creating file test_file.120
Creating file test_file.121
Creating file test_file.122
Creating file test_file.123
Creating file test_file.124
Creating file test_file.125
Creating file test_file.126
Creating file test_file.127
1073741824 bytes written in 110.77 seconds (9.24 MiB/sec).
[root@guanbin-k8s-master tmp]# sysbench --test=fileio --num-threads=16 --file-total-size=1G --file-test-mode=rndrw run
WARNING: the --test option is deprecated. You can pass a script name or path on the command line without any options.
WARNING: --num-threads is deprecated, use --threads instead
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)
Running the test with following options:
Number of threads: 16
Initializing random number generator from current time
Extra file open flags: (none)
128 files, 8MiB each
1GiB total file size
Block size 16KiB
Number of IO requests: 0
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 100 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random r/w test
Initializing worker threads...
Threads started!
File operations:
    reads/s:                      157.44
    writes/s:                     104.96
    fsyncs/s:                     480.79
Throughput:
    read, MiB/s:                  2.46
    written, MiB/s:               1.64
General statistics:
    total time:                          13.3355s
    total number of events:              7865
Latency (ms):
         min:                                    0.00
         avg:                                   20.61
         max:                                 1115.85
         95th percentile:                      142.39
         sum:                               162071.40
Threads fairness:
    events (avg/stddev):           491.5625/141.20
    execution time (avg/stddev):   10.1295/0.03

吞吐量：讀2.46MiB/s，寫1.64MiB/s; 95%延遲 142.39ms

4.測試mysql性能

測試時使用的腳本為lua腳本，可以使用sysbench自帶腳本，也可以自己開發。對于大多數應用，使用sysbench自帶的腳本就足夠了。不同版本的sysbench中，lua腳本的位置可能不同，可以自己在sysbench路徑下使用find命令搜索oltp.lua。

P.S.：大多數數據服務都是oltp類型的，如果你不了解什么是oltp，那么大概率你的數據服務就是oltp類型的。MySQL OLTP（On-Line Transaction Processing聯機事務處理過程）；

（1）盡量不要在MySQL服務器運行的機器上進行測試，一方面可能無法體現網絡（哪怕是局域網）的影響，另一方面，sysbench的運行（尤其是設置的并發數較高時）會影響MySQL服務器的表現。
（2）可以逐步增加客戶端的并發連接數（--thread參數），觀察在連接數不同情況下，MySQL服務器的表現；如分別設置為10,20,50,100等。
（3）一般執行模式選擇complex即可，如果需要特別測試服務器只讀性能，或不使用事務時的性能，可以選擇simple模式或nontrx模式。
（4）如果連續進行多次測試，注意確保之前測試的數據已經被清理干凈。

下面是sysbench使用的一個例子：

注意：先準備數據庫

mysql> create database sbtest;

其中，執行模式為complex，使用了10個表，每個表有10萬條數據，客戶端的并發線程數為10，執行時間為120秒，每10秒生成一次報告。

sysbench ./tests/include/oltp_legacy/oltp.lua --mysql-host={yourhostip} --mysql-port=3306 --mysql-user={username} --mysql-password={password} --oltp-test-mode=complex --mysql-table-engine=innodb --oltp-tables-count=10 --oltp-table-size=100000 --threads=10 --time=120 --report-interval=10 prepare

其中的hostip、username、password請自行切換為自己真實的環境數據

查看執行結果

sysbench ./tests/include/oltp_legacy/oltp.lua --mysql-host={yourhostip} --mysql-port=3306 --mysql-user={username} --mysql-password={password} --oltp-test-mode=complex --oltp-tables-count=10 --oltp-table-size=100000 --threads=10 --time=120 --report-interval=10 run

Running the test with following options:
Number of threads: 10
Report intermediate results every 10 second(s)
Initializing random number generator from current time
Initializing worker threads...
Threads started!
[ 10s ] thds: 10 tps: 17.19 qps: 362.78 (r/w/o: 254.64/72.76/35.38) lat (ms,95%): 1589.90 err/s: 0.00 reconn/s: 0.00
[ 20s ] thds: 10 tps: 33.50 qps: 670.08 (r/w/o: 469.06/134.02/67.01) lat (ms,95%): 530.08 err/s: 0.00 reconn/s: 0.00
[ 30s ] thds: 10 tps: 39.30 qps: 786.00 (r/w/o: 550.20/157.20/78.60) lat (ms,95%): 458.96 err/s: 0.00 reconn/s: 0.00
[ 40s ] thds: 10 tps: 38.80 qps: 775.45 (r/w/o: 543.16/154.69/77.59) lat (ms,95%): 634.66 err/s: 0.00 reconn/s: 0.00
[ 50s ] thds: 10 tps: 30.10 qps: 602.54 (r/w/o: 421.43/120.91/60.20) lat (ms,95%): 590.56 err/s: 0.00 reconn/s: 0.00
[ 60s ] thds: 10 tps: 33.90 qps: 678.00 (r/w/o: 474.60/135.60/67.80) lat (ms,95%): 419.45 err/s: 0.00 reconn/s: 0.00
[ 70s ] thds: 10 tps: 29.50 qps: 589.98 (r/w/o: 412.99/118.00/59.00) lat (ms,95%): 787.74 err/s: 0.00 reconn/s: 0.00
[ 80s ] thds: 10 tps: 39.90 qps: 798.02 (r/w/o: 558.62/159.60/79.80) lat (ms,95%): 569.67 err/s: 0.00 reconn/s: 0.00
[ 90s ] thds: 10 tps: 38.10 qps: 761.99 (r/w/o: 533.40/152.40/76.20) lat (ms,95%): 484.44 err/s: 0.00 reconn/s: 0.00
[ 100s ] thds: 10 tps: 43.90 qps: 877.99 (r/w/o: 614.60/175.60/87.80) lat (ms,95%): 383.33 err/s: 0.00 reconn/s: 0.00
[ 110s ] thds: 10 tps: 37.80 qps: 756.00 (r/w/o: 529.20/151.20/75.60) lat (ms,95%): 530.08 err/s: 0.00 reconn/s: 0.00
[ 120s ] thds: 10 tps: 44.40 qps: 888.01 (r/w/o: 621.60/177.60/88.80) lat (ms,95%): 419.45 err/s: 0.00 reconn/s: 0.00
SQL statistics:
    queries performed:
        read:                            59836
        write:                           17096
        other:                           8548
        total:                           85480
    transactions:                        4274   (35.59 per sec.)
    queries:                             85480  (711.77 per sec.)
    ignored errors:                      0      (0.00 per sec.)
    reconnects:                          0      (0.00 per sec.)
General statistics:
    total time:                          120.0919s
    total number of events:              4274
Latency (ms):
         min:                                   50.07
         avg:                                  280.96
         max:                                 2486.17
         95th percentile:                      559.50
         sum:                              1200810.10
Threads fairness:
    events (avg/stddev):           427.4000/4.20
    execution time (avg/stddev):   120.0810/0.01

其中，對于我們比較重要的信息包括：

queries：查詢總數及qps

transactions：事務總數及tps

Latency-95th percentile：前95%的請求的最大響應時間，本例中是344毫秒，這個延遲非常大，是因?yàn)槲矣玫腗ySQL服務器性能很差；在正式環境中這個數值是絕對不能接受的。

最后清理數據：

sysbench ./tests/include/oltp_legacy/oltp.lua --mysql-host={yourhostip} --mysql-port=3306 --mysql-user={username} --mysql-password={password} --oltp-tables-count=10  cleanup

清理的日志輸出

sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)
Dropping table 'sbtest1'...
Dropping table 'sbtest2'...
Dropping table 'sbtest3'...
Dropping table 'sbtest4'...
Dropping table 'sbtest5'...
Dropping table 'sbtest6'...
Dropping table 'sbtest7'...
Dropping table 'sbtest8'...
Dropping table 'sbtest9'...
Dropping table 'sbtest10'...

到此這篇關于服務器性能測試?yán)髦畇ysbench的文章就介紹到這了,更多相關服務器性能測試sysbench內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: