import serial  # 串口通信核心庫
import serial.tools.list_ports  # 串口設備枚舉
import threading  # 多線程處理
import queue  # 線程安全隊列
import ttkbootstrap as ttk  # 現代化UI框架
from tkinter import filedialog  # 文件對話框

# 必需庫安裝
pip install pyserial ttkbootstrap

def open_serial(self):
    # 參數映射轉換
    parity_map = {
        'None': serial.PARITY_NONE,
        'Even': serial.PARITY_EVEN,
        # ...其他校驗位映射
    }
    
    self.serial_port = serial.Serial(
        port=self.port_cb.get(),
        baudrate=int(self.baudrate_cb.get()),
        parity=parity_map[self.parity_cb.get()],
        timeout=0.1  # 非阻塞讀取
    )

def receive_worker(self):
    while not self.receive_thread_event.is_set():
        try:
            # 非阻塞讀取
            if self.serial_port.in_waiting > 0:
                data = self.serial_port.read(self.serial_port.in_waiting)
                self.receive_queue.put(data)
        except serial.SerialException:
            break

def auto_send_task(self):
    if self.auto_send_flag:
        try:
            interval = int(self.interval_entry.get())
            self.send_data()  # 執行發送
            self.master.after(interval, self.auto_send_task)  # 定時循環
        except ValueError:
            self.auto_var.set(False)

main_frame = ttk.Frame(self.master)
left_frame = ttk.Labelframe(main_frame, text="串口配置")  # 左側配置區
send_frame = ttk.Labelframe(right_frame, text="數據發送")  # 右上發送區
recv_frame = ttk.Labelframe(right_frame, text="數據接收")  # 右下接收區

def change_theme(self):
    selected_theme = self.theme_cb.get()
    self.style.theme_use(selected_theme)  # 動態切換主題

import serial
import serial.tools.list_ports
import threading
import queue
import os
import time
import ttkbootstrap as ttk
from ttkbootstrap.constants import *
from ttkbootstrap.dialogs import Messagebox
from ttkbootstrap.scrolled import ScrolledText
from tkinter import BooleanVar, StringVar, IntVar
import platform
from tkinter import filedialog
import json


class SerialTool:
    def __init__(self, master):
        self.master = master
        self.master.title("串口調試助手")
        self.master.geometry("900x520")
        self.master.resizable(False, False)  # 禁止調整窗口大小
        self.master.update()  # 強制應用尺寸限制

        # 初始化樣式
        self.style = ttk.Style(theme='cosmo')
        # 配置邊框線為純黑色的樣式
        self.style.configure('BlackBorder.TLabelframe', bordercolor='#D3D3D3', relief='solid', borderwidth=1)

        # 串口參數
        self.serial_port = None
        self.receive_queue = queue.Queue()
        self.auto_send_flag = False
        self.send_count = 0
        self.receive_count = 0
        self.receive_thread = None
        self.receive_thread_event = threading.Event()  # 用于控制接收線程的事件

        # 發送歷史記錄
        self.send_history = []
        self.history_index = -1

        # 自動檢測串口變化
        self.last_port_count = 0

        # 創建界面
        self.create_widgets()
        self.refresh_ports()
        self.master.after(100, self.process_queue)
        self.check_ports_change()  # 開始檢測串口變化

    def create_widgets(self):
        """創建三欄式布局"""
        main_frame = ttk.Frame(self.master)
        main_frame.pack(fill=BOTH, expand=True, padx=10, pady=10)

        # 主題切換控件
        theme_frame = ttk.Frame(self.master)
        theme_frame.pack(fill=X, padx=10, pady=(0, 5))
        
        ttk.Label(theme_frame, text="主題:").pack(side=LEFT, padx=5)
        self.theme_cb = ttk.Combobox(
            theme_frame, 
            values=sorted(ttk.Style().theme_names()),
            state='readonly'
        )
        self.theme_cb.pack(side=LEFT, padx=5)
        self.theme_cb.set('cosmo')
        self.theme_cb.bind('<<ComboboxSelected>>', self.change_theme)
        
        # 左側串口配置區
        left_frame = ttk.Labelframe(main_frame, text="串口配置", padding=15, style='BlackBorder.TLabelframe')
        left_frame.grid(row=0, column=0, sticky=NSEW, padx=5, pady=5)

        # 右側上下分區
        right_frame = ttk.Frame(main_frame)
        right_frame.grid(row=0, column=1, sticky=NSEW, padx=5, pady=5)

        # 發送區（右上）
        send_frame = ttk.Labelframe(right_frame, text="數據發送", padding=15, style='BlackBorder.TLabelframe')
        send_frame.pack(fill=BOTH, expand=True, side=TOP)

        # 接收區（右下）
        recv_frame = ttk.Labelframe(right_frame, text="數據接收", padding=15, style='BlackBorder.TLabelframe')
        recv_frame.pack(fill=BOTH, expand=True, side=TOP)

        # 配置網格權重
        main_frame.columnconfigure(1, weight=1)
        main_frame.rowconfigure(0, weight=1)
        right_frame.rowconfigure(1, weight=1)

        # 創建各區域組件
        self.create_serial_controls(left_frame)
        self.create_send_controls(send_frame)
        self.create_recv_controls(recv_frame)

        # 狀態欄
        self.status_var = StringVar(value="就緒")
        ttk.Label(self.master, textvariable=self.status_var,
                  bootstyle=(SECONDARY, INVERSE)).pack(fill=X, side=BOTTOM)

    def change_theme(self, event=None):
        """切換主題"""
        selected_theme = self.theme_cb.get()
        self.style.theme_use(selected_theme)
        
    def create_serial_controls(self, parent):
        """串口參數控件"""
        param_frame = ttk.Frame(parent)
        param_frame.pack(fill=X)

        # 串口號
        ttk.Label(param_frame, text="COM端口:").grid(row=0, column=0, padx=5, pady=5, sticky=W)
        self.port_cb = ttk.Combobox(param_frame, width=15)
        self.port_cb.grid(row=0, column=1, padx=5, pady=5)

        # 波特率
        ttk.Label(param_frame, text="波特率:").grid(row=1, column=0, padx=5, pady=5, sticky=W)
        self.baudrate_cb = ttk.Combobox(param_frame, values=[
            '9600', '115200', '57600', '38400',
            '19200', '14400', '4800', '2400', '1200'
        ], width=15)
        self.baudrate_cb.set('9600')
        self.baudrate_cb.grid(row=1, column=1, padx=5, pady=5)

        # 校驗位
        ttk.Label(param_frame, text="校驗位:").grid(row=2, column=0, padx=5, pady=5, sticky=W)
        self.parity_cb = ttk.Combobox(param_frame, values=[
            'None', 'Even', 'Odd', 'Mark', 'Space'
        ], width=15)
        self.parity_cb.set('None')
        self.parity_cb.grid(row=2, column=1, padx=5, pady=5)

        # 數據位
        ttk.Label(param_frame, text="數據位:").grid(row=3, column=0, padx=5, pady=5, sticky=W)
        self.databits_cb = ttk.Combobox(param_frame, values=['8', '7', '6', '5'], width=15)
        self.databits_cb.set('8')
        self.databits_cb.grid(row=3, column=1, padx=5, pady=5)

        # 停止位
        ttk.Label(param_frame, text="停止位:").grid(row=4, column=0, padx=5, pady=5, sticky=W)
        self.stopbits_cb = ttk.Combobox(param_frame, values=['1', '1.5', '2'], width=15)
        self.stopbits_cb.set('1')
        self.stopbits_cb.grid(row=4, column=1, padx=5, pady=5)

        # 操作按鈕
        # 按鈕容器
        btn_frame = ttk.Frame(parent)
        btn_frame.pack(pady=10, fill=X)

        # 配置網格列權重實現自動伸縮
        btn_frame.columnconfigure((0, 1, 2), weight=1, uniform='btns')  # uniform 確保列寬一致

        # 刷新按鈕
        ttk.Button(
            btn_frame,
            text="刷新端口",
            command=self.refresh_ports,
            bootstyle=OUTLINE
        ).grid(row=0, column=0, padx=5, sticky="ew")

        # 連接按鈕
        self.conn_btn = ttk.Button(
            btn_frame,
            text="打開串口",
            command=self.toggle_connection,
            bootstyle=OUTLINE + SUCCESS
        )
        self.conn_btn.grid(row=0, column=1, padx=5, sticky="ew")

        # 手動發送按鈕（移動到此處）
        ttk.Button(
            btn_frame,
            text="手動發送",
            command=self.send_data,
            bootstyle=OUTLINE + PRIMARY
        ).grid(row=0, column=2, padx=5, sticky="ew")

    def create_send_controls(self, parent):
        """發送區控件"""
        # 自動發送設置
        auto_frame = ttk.Frame(parent)
        auto_frame.pack(fill=X, pady=5)

        self.auto_var = BooleanVar()
        ttk.Checkbutton(auto_frame, text="自動發送", variable=self.auto_var,
                        command=self.toggle_auto_send).pack(side=LEFT)
        ttk.Label(auto_frame, text="間隔(ms):").pack(side=LEFT, padx=5)
        self.interval_entry = ttk.Entry(auto_frame, width=8)
        self.interval_entry.insert(0, "1000")
        self.interval_entry.pack(side=LEFT)

        # 發送內容
        self.send_text = ScrolledText(parent, height=4, autohide=True)
        self.send_text.pack(fill=BOTH, expand=True)
        
        # 綁定上下箭頭鍵用于歷史記錄導航
        self.send_text.bind("<Up>", self.prev_history)
        self.send_text.bind("<Down>", self.next_history)

    def create_recv_controls(self, parent):
        """接收區控件"""
        # 接收顯示
        self.recv_text = ScrolledText(parent, height=5, autohide=True)
        self.recv_text.pack(fill=BOTH, expand=True)

        # 統計欄
        stat_frame = ttk.Frame(parent)
        stat_frame.pack(fill=X, pady=5)
        ttk.Label(stat_frame, text="發送:").pack(side=LEFT, padx=5)
        self.send_label = ttk.Label(stat_frame, text="0")
        self.send_label.pack(side=LEFT)
        ttk.Label(stat_frame, text="接收:").pack(side=LEFT, padx=10)
        self.recv_label = ttk.Label(stat_frame, text="0")
        self.recv_label.pack(side=LEFT)
        
        # 添加保存接收按鈕
        ttk.Button(stat_frame, text="保存接收", command=self.save_received,
                  bootstyle=OUTLINE + INFO).pack(side=RIGHT, padx=5)
        
        ttk.Button(stat_frame, text="清空", command=self.clear_received,
                  bootstyle=OUTLINE + WARNING).pack(side=RIGHT)

    def refresh_ports(self):
        """刷新端口列表"""
        try:
            ports = [p.device for p in serial.tools.list_ports.comports()]
            self.port_cb['values'] = ports
            self.status_var.set(f"自動檢測到主板有{len(ports)} 個串口可用，請注意選擇正確的。")
            self.last_port_count = len(ports)
        except Exception as e:
            print(f"Error refreshing ports: {e}")
            self.status_var.set(f"刷新端口時出錯: {e}")

    def check_ports_change(self):
        """檢查串口變化"""
        current_count = len(list(serial.tools.list_ports.comports()))
        if current_count != self.last_port_count:
            self.refresh_ports()
        self.master.after(1000, self.check_ports_change)  # 每秒檢查一次

    def toggle_connection(self):
        """切換連接狀態"""
        if self.serial_port and self.serial_port.is_open:
            self.close_serial()
        else:
            self.open_serial()

    def open_serial(self):
        """打開串口"""
        try:
            port = self.port_cb.get()
            if not port:
                raise ValueError("請選擇串口")

            parity_map = {
                'None': serial.PARITY_NONE,
                'Even': serial.PARITY_EVEN,
                'Odd': serial.PARITY_ODD,
                'Mark': serial.PARITY_MARK,
                'Space': serial.PARITY_SPACE
            }

            self.serial_port = serial.Serial(
                port=port,
                baudrate=int(self.baudrate_cb.get()),
                parity=parity_map[self.parity_cb.get()],
                bytesize=int(self.databits_cb.get()),
                stopbits=float(self.stopbits_cb.get()),
                timeout=0.1
            )

            self.conn_btn.configure(text="關閉串口", bootstyle=OUTLINE + SUCCESS)
            self.status_var.set(f"已連接 {port}")
            self.receive_thread_event.clear()  # 清除事件標志
            self.receive_thread = threading.Thread(target=self.receive_worker, daemon=True)
            self.receive_thread.start()

        except Exception as e:
            Messagebox.show_error(f"主板上沒有這個串口或你選的被測端口跟主板端口不對應，請?jiān)谠O(shè)備管理器中確認正確的端口: {str(e)}", "錯誤")
            self.status_var.set("連接失敗")

    def close_serial(self):
        """關閉串口"""
        self.receive_thread_event.set()  # 設置事件標志，通知接收線程停止
        if self.receive_thread and self.receive_thread.is_alive():
            self.receive_thread.join()  # 等待接收線程結束

        if self.serial_port:
            try:
                self.serial_port.close()
            except Exception as e:
                print(f"關閉串口時出錯: {e}")

        self.conn_btn.configure(text="打開串口", bootstyle=DANGER)
        self.status_var.set("已斷開連接")

    def receive_worker(self):
        """接收線程工作函數"""
        while not self.receive_thread_event.is_set() and self.serial_port and self.serial_port.is_open:
            try:
                if self.serial_port.in_waiting > 0:
                    data = self.serial_port.read(self.serial_port.in_waiting)
                    self.receive_queue.put(data)
            except Exception as e:
                print(f"接收錯誤: {e}")
                break

    def process_queue(self):
        """處理接收隊列"""
        while not self.receive_queue.empty():
            data = self.receive_queue.get()
            self.display_received(data)
            self.receive_count += len(data)
            self.recv_label.configure(text=str(self.receive_count))
        self.master.after(100, self.process_queue)

    def display_received(self, data):
        """顯示接收數據（帶時間戳）"""
        timestamp = time.strftime("[%Y-%m-%d %H:%M:%S] ", time.localtime())
        try:
            text = data.decode('utf-8')
            self.recv_text.insert(END, timestamp + text + '\n')
            self.recv_text.see(END)
        except UnicodeDecodeError:
            self.recv_text.insert(END, timestamp + data.hex(' ') + '\n')
            self.recv_text.see(END)

    def toggle_auto_send(self):
        """切換自動發送"""
        self.auto_send_flag = self.auto_var.get()
        if self.auto_send_flag:
            self.auto_send_task()

    def auto_send_task(self):
        """自動發送任務"""
        if self.auto_send_flag and self.serial_port and self.serial_port.is_open:
            try:
                interval = int(self.interval_entry.get())
                self.send_data()
                self.master.after(interval, self.auto_send_task)
            except ValueError:
                self.auto_var.set(False)
                Messagebox.show_error("無效的間隔時間", "錯誤")

    def send_data(self):
        """發送數據"""
        if not self.serial_port or not self.serial_port.is_open:
            Messagebox.show_warning("請先打開串口", "警告")
            return

        data = self.send_text.get(1.0, END).strip()
        if not data:
            return

        try:
            # 添加到歷史記錄
            if data and (not self.send_history or data != self.send_history[0]):
                self.send_history.insert(0, data)
                if len(self.send_history) > 20:  # 限制歷史記錄數量
                    self.send_history.pop()
                self.history_index = -1  # 重置歷史索引

            self.serial_port.write(data.encode('utf-8'))
            self.send_count += len(data)
            self.send_label.configure(text=str(self.send_count))
            
            # 顯示發送的數據（帶時間戳）
            timestamp = time.strftime("[%Y-%m-%d %H:%M:%S] ", time.localtime())
            self.recv_text.insert(END, f"{timestamp}[Send] {data}\n")
            self.recv_text.see(END)
        except Exception as e:
            Messagebox.show_error(f"發送失敗: {str(e)}", "錯誤")

    def prev_history(self, event):
        """上一條歷史記錄"""
        if self.send_history:
            if self.history_index < len(self.send_history) - 1:
                self.history_index += 1
                self.send_text.delete(1.0, END)
                self.send_text.insert(END, self.send_history[self.history_index])
        return "break"

    def next_history(self, event):
        """下一條歷史記錄"""
        if self.history_index > 0:
            self.history_index -= 1
            self.send_text.delete(1.0, END)
            self.send_text.insert(END, self.send_history[self.history_index])
        elif self.history_index == 0:
            self.history_index = -1
            self.send_text.delete(1.0, END)
        return "break"

    def save_received(self):
        """保存接收內容到文件"""
        filename = filedialog.asksaveasfilename(
            defaultextension=".txt",
            filetypes=[("Text Files", "*.txt"), ("All Files", "*.*")]
        )
        if filename:
            try:
                with open(filename, 'w', encoding='utf-8') as f:
                    f.write(self.recv_text.get(1.0, END))
                self.status_var.set(f"接收內容已保存到 {filename}")
            except Exception as e:
                Messagebox.show_error(f"保存文件失敗: {str(e)}", "錯誤")

    def clear_received(self):
        """清空接收區"""
        self.recv_text.delete(1.0, END)
        self.receive_count = 0
        self.recv_label.configure(text="0")
        self.send_text.delete(1.0, END)
        self.send_count = 0
        self.send_label.configure(text="0")

    def on_closing(self):
        """安全關閉程序"""
        # 停止自動發送循環
        self.auto_send_flag = False

        # 關閉串口連接
        self.close_serial()

        # 確保完全退出
        self.master.quit()  # 終止mainloop
        self.master.destroy()  # 銷毀所有Tkinter對象
        self.master.after(500, self.force_exit)  # 500ms后強制退出

    def force_exit(self):
        """最終退出保障"""
        import os
        os._exit(0)  # 強制終止進程


if __name__ == "__main__":
    root = ttk.Window()
    app = SerialTool(root)
    root.protocol("WM_DELETE_WINDOW", app.on_closing)
    root.mainloop()