Vue+LogicFlow+Flowable實現工作流

更新時間：2023年12月22日 16:15:42 作者：王八八。

本文主要介紹了Vue+LogicFlow+Flowable實現工作流,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧

一、實現效果

前端使用LogicFlow框架繪制流程圖，可以導出為xml工作流標準格式數據，通過xml文件傳遞到后端進行Flowable流程注冊，并保存到數據庫中。

在這里插入圖片描述

二、BPM傳輸文件格式（.xml）

如需添加承辦人的話，需要在LogicFlow導出文件的基礎上手動添加xmlns:flowable="http://flowable.org/bpmn"flowable插件，不然后臺無法識別flowable:candidateUsers。

<bpmn:definitions xmlns:flowable="http://flowable.org/bpmn" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:bpmn="http://www.omg.org/spec/BPMN/20100524/MODEL" xmlns:bpmndi="http://www.omg.org/spec/BPMN/20100524/DI" xmlns:dc="http://www.omg.org/spec/DD/20100524/DC" xmlns:di="http://www.omg.org/spec/DD/20100524/DI" id="Definitions_5588fe5_6" targetNamespace="http://logic-flow.org" exporter="logicflow" exporterVersion="1.2.0">	
  <bpmn:process isExecutable="true" id="Process_2a9c067_6">	
    <bpmn:startEvent id="Event_14efe0e" name="開始節點" flowable:candidateUsers="admin,admin1,admin2">	
      <bpmn:outgoing>Flow_a3e7d0c</bpmn:outgoing>	
    </bpmn:startEvent>	
    <bpmn:userTask id="Activity_602107f" name="普通節點" flowable:candidateUsers="uesr,uesr1,uesr2">	
      <bpmn:incoming>Flow_a3e7d0c</bpmn:incoming>	
      <bpmn:outgoing>Flow_3f9a386</bpmn:outgoing>	
    </bpmn:userTask>	
    <bpmn:endEvent id="Event_49a11b4" name="結束節點">	
      <bpmn:incoming>Flow_3f9a386</bpmn:incoming>	
    </bpmn:endEvent>	
      <bpmn:sequenceFlow id="Flow_a3e7d0c" sourceRef="Event_14efe0e" targetRef="Activity_602107f"/>	
      <bpmn:sequenceFlow id="Flow_3f9a386" sourceRef="Activity_602107f" targetRef="Event_49a11b4"/>	
  </bpmn:process>	
  <bpmndi:BPMNDiagram id="BPMNDiagram_1">	
    <bpmndi:BPMNPlane id="BPMNPlane_1" bpmnElement="Process_2a9c067">	
        <bpmndi:BPMNEdge id="Flow_a3e7d0c_di" bpmnElement="Flow_a3e7d0c">	
            <di:waypoint x="343" y="164"/>	
            <di:waypoint x="448" y="164"/>	
        </bpmndi:BPMNEdge>	
        <bpmndi:BPMNEdge id="Flow_3f9a386_di" bpmnElement="Flow_3f9a386">	
            <di:waypoint x="548" y="164"/>	
            <di:waypoint x="665" y="164"/>	
        </bpmndi:BPMNEdge>	
        <bpmndi:BPMNShape id="Event_14efe0e_di" bpmnElement="Event_14efe0e">	
          <dc:Bounds x="305" y="144" width="40" height="40"/>	
          <bpmndi:BPMNLabel>	
            <dc:Bounds x="305" y="197" width="40" height="14"/>	
          </bpmndi:BPMNLabel>	
        </bpmndi:BPMNShape>	
        <bpmndi:BPMNShape id="Activity_602107f_di" bpmnElement="Activity_602107f">	
          <dc:Bounds x="448" y="124" width="100" height="80"/>	
          <bpmndi:BPMNLabel>	
            <dc:Bounds x="478" y="157" width="40" height="14"/>	
          </bpmndi:BPMNLabel>	
        </bpmndi:BPMNShape>	
        <bpmndi:BPMNShape id="Event_49a11b4_di" bpmnElement="Event_49a11b4">	
          <dc:Bounds x="663" y="144" width="40" height="40"/>	
          <bpmndi:BPMNLabel>	
            <dc:Bounds x="663" y="197" width="40" height="14"/>	
          </bpmndi:BPMNLabel>	
        </bpmndi:BPMNShape>	
    </bpmndi:BPMNPlane>	
  </bpmndi:BPMNDiagram>	
</bpmn:definitions>

三、前端框架（LogicFlow）

LogicFlow.vue

<template>
    <div class="container" ref="container"></div>
    <BpmnNodePanel :lf="lf"></BpmnNodePanel>
    <div class="node-item">
      <div class="node-item-icon bpmn-save" @click="saveNode()"></div>
      <span class="node-label">保存</span>
      <div class="node-item-icon bpmn-save" @click="cleanNode()"></div>
      <span class="node-label">清空</span>
      <div class="node-item-icon bpmn-save" @click="reloadNode()"></div>
      <span class="node-label">加載</span>
      <div class="node-item-icon bpmn-save" @click="deleteNode()"></div>
      <span class="node-label">刪除</span>
      <div class="node-item-icon bpmn-save" @click="getList()"></div>
      <span class="node-label">獲取定義流程</span>
      <div class="node-item-icon bpmn-save" @click="flowRun()"></div>
      <span class="node-label">工作流實例</span>
    </div>
</template>
<script>
import LogicFlow from '@logicflow/core'
import '@logicflow/core/dist/style/index.css'
import { BpmnElement, BpmnXmlAdapter, Menu } from '@logicflow/extension'
import '@logicflow/extension/lib/style/index.css'
import BpmnNodePanel from "./BpmnNodePanel.vue"
import { addFlow, infoFlow, deleteFlow, getDeployList, flowRun } from "../api/server"
import { addFlowable, addProp, getTypeNameByTag, setValueByTag } from '../utils/xml'

export default {
    data() {
        return {
            lf: void 0,
            xmlData: void 0,
            definitionsId: void 0,
            processId: void 0,
        }
    },
    components: { BpmnNodePanel },
    created() {},
    mounted() {
        this.loadFlow()
    },
    methods: {
        loadFlow() {
            LogicFlow.use(BpmnElement)
            LogicFlow.use(BpmnXmlAdapter)
            LogicFlow.use(Menu)

            //初始化
            this.lf = new LogicFlow({
                container: this.$refs.container,
                stopScrollGraph: true,
                stopZoomGraph: true,
                grid: false,
                keyboard: {
                    enabled: true,
                },
            });
            // this.lf.setDefaultEdgeType('bezier')
            this.lf.render();
        },
        // 保存
        saveNode() { 
            // 獲取xml數據
            this.xmlData = this.lf.getGraphData();

            // 添加flowable擴展
            this.xmlData = addFlowable(this.xmlData)

            // 判斷是否為文檔編輯
            if (this.processId) {
                // 修改為原流程id
                this.xmlData = setValueByTag(this.xmlData, 'bpmn:definitions', 'id', this.definitionsId)
                this.xmlData = setValueByTag(this.xmlData, 'bpmn:process', 'id', this.processId)
            } else { 
                // 添加節點用戶 個人assignee  候選人candidateUsers 候選組候選人candidateGroups 動態設置${employee}
                // this.xmlData = addProp(this.xmlData, 'bpmn:startEvent', 'flowable:candidateUsers', 'zhao,qian,sun')
                this.xmlData = addProp(this.xmlData, 'bpmn:userTask', 'flowable:candidateUsers', 'li,zhou,wang')
            }

            const data = {
                name: '測試流程',
                xml: this.xmlData
            }
            
            // 請求后臺接口（添加工作流）
            addFlow(data)
                .then(res => {
                    console.log(res)
                })
                .catch(err => {
                    console.log(err)
                })
        },
        // 清除
        cleanNode() {
            this.lf.clearData()
        },
        // 重新加載
        reloadNode() {
            // 查詢數據
            const data = {
                id: 'ff292b5d-4193-11ee-8e48-502b73dc5fce',
                name: '測試流程'
            }
            infoFlow(data)
                .then(res => {
                    if (res.result) {
                        // 獲取processId
                        const definitionsNodes = getTypeNameByTag(res.result, 'bpmn:definitions')
                        const processNodes = getTypeNameByTag(res.result, 'bpmn:process')
                        this.definitionsId = definitionsNodes.id
                        this.processId = processNodes.id
                        // 渲染數據
                        this.lf.render(res.result);
                    }
                    console.log(res)
                })
                .catch(err => {
                    console.log(err)
                })
        },
        // 刪除數據
        deleteNode() { 
            // 查詢數據
            const data = {
                id: ''
            }
            deleteFlow(data)
                .then(res => {
                    console.log(res)
                })
                .catch(err => {
                    console.log(err)
                })
        }, 
        // 獲取數據
        getList() { 
            getDeployList()
                .then(res => {
                    console.log(res)
                })
                .catch(err => {
                    console.log(err)
                })
        },
        // 流程實例
        flowRun() { 
            flowRun()
                .then(res => {
                    console.log(res)
                })
                .catch(err => {
                    console.log(err)
                })
        },
    },
}
</script>
<style scoped>
.container{
    width: 100%;
    height: 100%;
}

.node-item {
  position: absolute;
  top: 350px;
  left: 10px;
  width: 50px;
  padding: 10px;
  background-color: white;
  box-shadow: 0 0 10px 1px rgb(228, 224, 219);
  border-radius: 6px;
  text-align: center;
  z-index: 101;
}
.node-item-icon {
  width: 30px;
  height: 30px;
  margin-left: 10px;
  background-size: cover;
}
.node-label {
  font-size: 12px;
  margin-top: 5px;
  user-select: none;
}

.bpmn-save {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}
</style>

2.BpmnNodePanel.vue

<template>
  <div class="node-panel">
    <!-- <div class="node-item" @mousedown="openSelection()">
      <div class="node-item-icon bpmn-selection"></div>
      <span class="node-label">選區</span>
    </div> -->
    <div class="node-item" @mousedown="addStartNode()">
      <div class="node-item-icon bpmn-start"></div>
      <span class="node-label">開始節點</span>
    </div>
    <div class="node-item" @mousedown="addUserTask()">
      <div class="node-item-icon bpmn-user"></div>
      <span class="node-label">普通節點</span>
    </div>
    <!-- <div class="node-item" @mousedown="addServiceTask()">
      <div class="node-item-icon bpmn-service"></div>
      <span class="node-label">系統</span>
    </div> -->
    <!-- <div class="node-item" @mousedown="addGateWay()">
      <div class="node-item-icon bpmn-gateway"></div>
      <span class="node-label">判斷</span>
    </div> -->
    <div class="node-item" @mousedown="addEndNode()">
      <div class="node-item-icon bpmn-end"></div>
      <span class="node-label">結束節點</span>
    </div>
  </div>
</template>
<script>
import LogicFlow from '@logicflow/core';
export default {
  name: "BpmnNodePanel",
  data() {
    return {}
  },
  props: {
    lf: Object,
  },

  mounted() {
    //選區框選使用的
    let lf = this.$props.lf
    lf &&
      lf.on("selection:selected", () => {
          lf.updateEditConfig({
          stopMoveGraph: false,
        });
      });
  },
  methods: {
    openSelection() {
      (this.$props.lf).updateEditConfig({
        stopMoveGraph: true
      });
    },
    addStartNode() {
      (this.$props.lf).dnd.startDrag({
        type: "bpmn:startEvent",
        text: "開始節點",
      });
    },
    addUserTask() {
      (this.$props.lf).dnd.startDrag({
        type: "bpmn:userTask",
        text: "普通節點", 
      });
    },
    addServiceTask() {
      (this.$props.lf).dnd.startDrag({
        type: "bpmn:serviceTask",
        text: "系統",
      });
    },
    addGateWay() {
      (this.$props.lf).dnd.startDrag({
        type: "bpmn:exclusiveGateway",
        text: "判斷",
      });
    },
    addEndNode() {
      (this.$props.lf).dnd.startDrag({
        type: "bpmn:endEvent",
        text: "結束節點",
      });
    },
  },
};
</script>
<style>
.node-panel {
  position: absolute;
  top: 100px;
  left: 10px;
  width: 50px;
  padding: 10px;
  background-color: white;
  box-shadow: 0 0 10px 1px rgb(228, 224, 219);
  border-radius: 6px;
  text-align: center;
  z-index: 101;
}
.node-item {
  margin-bottom: 10px;
}
.node-item-icon {
  width: 30px;
  height: 30px;
  margin-left: 10px;
  background-size: cover;
}
.node-label {
  font-size: 12px;
  margin-top: 5px;
  user-select: none;
}

.bpmn-selection {
  background: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAAH6ji2bAAAABGdBTUEAALGPC/xhBQAAAOVJREFUOBGtVMENwzAIjKP++2026ETdpv10iy7WFbqFyyW6GBywLCv5gI+Dw2Bluj1znuSjhb99Gkn6QILDY2imo60p8nsnc9bEo3+QJ+AKHfMdZHnl78wyTnyHZD53Zzx73MRSgYvnqgCUHj6gwdck7Zsp1VOrz0Uz8NbKunzAW+Gu4fYW28bUYutYlzSa7B84Fh7d1kjLwhcSdYAYrdkMQVpsBr5XgDGuXwQfQr0y9zwLda+DUYXLaGKdd2ZTtvbolaO87pdo24hP7ov16N0zArH1ur3iwJpXxm+v7oAJNR4JEP8DoAuSFEkYH7cAAAAASUVORK5CYII=)
    center center no-repeat;
  cursor: grab;
}

.bpmn-start {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}
.bpmn-end {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}
.bpmn-user {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}
.bpmn-gateway {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}

.bpmn-service {
  background: url(data:image/png;base64,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)
    center center no-repeat;
  cursor: grab;
}
</style>

3.xml.js

/**
 * 添加flowable擴展
 * @param {*} xmlstr 
 * @returns 
 */
export function addFlowable(xmlstr) {
    const part1 = xmlstr.slice(0, 43); // 從開頭到指定位置之前的部分
    const part2 = xmlstr.slice(43); // 從指定位置到末尾的部分
    const newString = part1 + 'xmlns:flowable="http://flowable.org/bpmn" ' + part2; // 拼接成新的字符串
    
    return newString
}

/**
 * 添加屬性信息
 * @param {*} xmlstr 
 * @returns 
 */
export function addProp(xmlstr, Elements, key, value) {
    // 創建一個XML文檔對象
    const parser = new DOMParser();
    const xmlDoc = parser.parseFromString(xmlstr, 'application/xml');

    // 查找元素
    const userTaskElement = xmlDoc.getElementsByTagName(Elements);
    for (let i = 0; i < userTaskElement.length; i++) {
        if (!userTaskElement[i].attributes[key]) {
            userTaskElement[i].setAttribute(key, value);
        }
    }

    // 將修改后的XML文檔轉換回字符串
    const xmlSerializer = new XMLSerializer();
    const modifiedXmlString = xmlSerializer.serializeToString(xmlDoc);

    return modifiedXmlString;
}

/**
 *根據標簽名稱返回xml內容，標簽名必須唯一，若不滿足，修改方法
 * @param {*} xmlstr xml字符串
 * @param {element} tagName 標簽名稱，如<Name>
 */
export function getTypeNameByTag(xmlstr, tagName) {
    const parser = new DOMParser()
    const xmlDoc = parser.parseFromString(xmlstr, 'application/xml')
    const nameNodes = xmlDoc.getElementsByTagName(tagName)[0]
    if (nameNodes) {
        return nameNodes
    } else {
        return false
    }
}

/**
 * 根據標簽名稱修改內容
 * @param {*} xmlstr xml字符串
 * @param {element} tagName 標簽名稱，如<Name>
 * @param {*} key 修改對應key
 * @param {*} value 修改值value
 * @returns 
 */
export function setValueByTag(xmlstr, tagName, key, value) {
    // 字符串轉xml
    const parser = new DOMParser()
    const xmlDoc = parser.parseFromString(xmlstr, 'application/xml')
    const nameNodes = xmlDoc.getElementsByTagName(tagName)[0]
    nameNodes.setAttribute(key, value);
    // xml轉字符串
    const s = new XMLSerializer();
    const xml = s.serializeToString(xmlDoc);

    return xml;
}

4.server.js

import request from '../utils/request';
const url = 'http://localhost:8088'

/**
 * 添加（編輯）工作流
 * @param {*} data
 * @returns
 */
export function addFlow(data) {
    return request({
        url: url + '/flow/addFlow',
        method: 'post',
        data,
    });
}

/**
 * 查詢工作流
 * @param {*} data
 * @returns
 */
export function infoFlow(data) {
    return request({
        url: url + '/flow/infoFlow',
        method: 'post',
        data,
    });
}

/**
 * 刪除工作流
 * @param {*} data
 * @returns
 */
export function deleteFlow(data) {
    return request({
        url: url + '/flow/deleteFlow',
        method: 'post',
        data,
    });
}

/**
 * 獲取工作流定義
 * @param {*} data
 * @returns
 */
export function getDeployList(data) {
    return request({
        url: url + '/flow/getDeployList',
        method: 'post',
        data,
    });
}

/**
 * 工作流實例
 * @param {*} data
 * @returns
 */
export function flowRun(data) {
    return request({
        url: url + '/flow/deploymentRun',
        method: 'post',
        data,
    });
}

5.request.js

import axios from 'axios';
const service = axios.create({});
service.defaults.timeout = 20000;
// 請求攔截器
service.interceptors.request.use(
    (config) => {
        return config;
    },
    (error) => {
        console.log(error);
        return Promise.reject(error);
    }
);
// 響應攔截器
service.interceptors.response.use(
    (response) => {
        return response.data;
    },
    (error) => {
        return Promise.reject(error);
    }
);

export default service;

四、后端代碼（Flowable）

1.FlowController .java

@RestController
public class FlowController {
    @Autowired
    FlowService flowService;

    // 工作流部署（添加、編輯）
    @CrossOrigin
    @PostMapping("/flow/addFlow")
    public Result addFlow(@RequestBody Map<String,String> map){
        return flowService.AddFlow(map.get("id"), map.get("name"), map.get("xml"), map.get("key"));
    }

    // 工作流返回
    @CrossOrigin
    @PostMapping("/flow/infoFlow")
    public Result infoFlow(@RequestBody Map<String,String> map) {
        return flowService.InfoFlow(map.get("id"), map.get("name"));
    }

    // 工作流刪除
    @CrossOrigin
    @PostMapping("/flow/deleteFlow")
    public Result deleteFlow(@RequestBody Map<String,String> map) {
        return flowService.DeleteFlow(map.get("id"));
    }

    // 工作流查詢
    @CrossOrigin
    @PostMapping("/flow/getDeployList")
    public Result getDeployList() {
        return flowService.GetDeployList();
    }

    // 流程實例
    @CrossOrigin
    @PostMapping("/flow/deploymentRun")
    public Result deploymentRun(@RequestBody Map<String,String> map) {
        return flowService.DeploymentRun(map.get("userId"), map.get("key"));
    }

    // 流程查詢
    @CrossOrigin
    @PostMapping("/flow/infoTask")
    public Result InfoTask(@RequestBody Map<String,String> map) {
        return flowService.InfoTask(map.get("userId"));
    }

    // 流程執行
    @CrossOrigin
    @PostMapping("/flow/makeTask")
    public Result MakeTask(@RequestBody Map<String,String> map) {
        return flowService.MakeTask(map.get("userId"));
    }

    // 流程歷史
    @CrossOrigin
    @PostMapping("/flow/taskHistory")
    public Result TaskHistory() {
        return flowService.TaskHistory();
    }

    // 測試
    @CrossOrigin
    @PostMapping("/test")
    public Result test(@RequestBody AskForLeaveVO test) {
        return flowService.test(test);
    }


}

2.FlowService .java

@Service
public class FlowService {
    @Autowired
    ProcessEngine processEngine;
    @Autowired
    FlowTreeService flowTreeService;

    /**
     * 工作流部署（添加、編輯）
     * @param name 名稱
     * @param xml xml
     * @return
     */
    @Transactional
    public Result AddFlow(String id, String name, String xml, String key){
        try {
            RepositoryService repositoryService = processEngine.getRepositoryService();
            // 創建新流程
            Deployment deployment = repositoryService.createDeployment()
                    .addString(name + ".bpmn", xml)
                    .deploy();

            // 將工作流信息保存到流程樹表
            flowTreeService.AutoSave(id, deployment.getId(), key);
            System.out.println("id : " + id);
            System.out.println("添加id : " + deployment.getId());
            System.out.println("添加key : " + key);
            return Result.ok("添加成功", deployment.getId());

        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("添加失敗");
        }
    }

    /**
     * 工作流返回（返回xml）
     * @param id 查詢id
     * @param name 名稱
     * @return
     */
    @Transactional
    public Result InfoFlow(String id, String name) {
        try {
            // 流程查詢
            RepositoryService repositoryService = processEngine.getRepositoryService();
            InputStream resourceAsStream = repositoryService.getResourceAsStream(id, name + ".bpmn");
            // Java流轉String
            String resultXml = new BufferedReader(new InputStreamReader(resourceAsStream,"utf-8"))
                    .lines().collect(Collectors.joining(System.lineSeparator()));

            return Result.ok("查詢成功", resultXml);
        } catch (Exception e) {
            e.printStackTrace();
        }
        return Result.error("查詢失敗");
    }

    /**
     * 工作流刪除
     * @param id
     * @return
     */
    @Transactional
    public  Result DeleteFlow(String id){
        try {
            RepositoryService repositoryService = processEngine.getRepositoryService();
            // 設置為TRUE 級聯刪除流程定義，及時流程有實例啟動，也可以刪除，設置為false 非級聯刪除操作。
            repositoryService.deleteDeployment(id);
            System.out.println("刪除id : " + id);
            return Result.ok("刪除成功", id);
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("刪除失敗");
        }
    }

    /**
     * 工作流部署列表查詢
     * @return
     */
    @Transactional
    public Result GetDeployList() {
        try {
            RepositoryService repositoryService = processEngine.getRepositoryService();
            List<ProcessDefinition> list = repositoryService.createProcessDefinitionQuery().list();
            System.out.println("list : " + list);
            return Result.ok("查詢成功");
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("查詢失敗");
        }
    }

    /**
     * 啟動流程實例
     * @param userId 發起人
     * @param key 流程key
     * @return
     */
    @Transactional
    public Result DeploymentRun(String userId, String key){
        try {
//          Map<String, Object> variables = new HashMap<String, Object>();
//          variables.put("employee", userId);

            RuntimeService runtimeService = processEngine.getRuntimeService();
            ProcessInstance processInstance = runtimeService.startProcessInstanceByKey(key);
            //獲取流程實例的相關信息
            System.out.println("流程定義的id = " + processInstance.getProcessDefinitionId());
            System.out.println("流程實例的id = " + processInstance.getId());
            return Result.ok("成功", "流程實例id = " + processInstance.getId());
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("失敗");
        }
    }

    /**
     * 查詢流程任務
     * @param userId
     * @return
     */
    @Transactional
    public Result InfoTask(String userId){
        try {
            TaskService taskService = processEngine.getTaskService();
            // 查詢多人任務
            List<Task> taskList = taskService.createTaskQuery().taskCandidateUser(userId).list();
            System.out.println("taskList" + taskList);
            //遍歷任務列表
            for(Task task:taskList){
                System.out.println("流程定義id = " + task.getProcessDefinitionId());
                System.out.println("流程實例id = " + task.getProcessInstanceId());
                System.out.println("任務id = " + task.getId());
                System.out.println("任務名稱 = " + task.getName());
            }
            return Result.ok("成功");
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("失敗");
        }
    }

    /**
     * 執行流程任務
     * @param userId
     * @return
     */
    @Transactional
    public Result MakeTask(String userId){
        try {
            TaskService taskService = processEngine.getTaskService();
            // 查詢個人任務
            List<Task> list = taskService.createTaskQuery().taskCandidateUser(userId).list();
            System.out.println("taskList" + list);
            for (Task task : list) {
                taskService.complete(task.getId());
                System.out.println("task.getId()" + task.getId());
            }
            return Result.ok("成功");
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("失敗");
        }
    }

    /**
     * 查詢歷史流程
     * @param
     * @return
     */
    @Transactional
    public Result TaskHistory(){
        try {
            HistoryService historyService = processEngine.getHistoryService();
            List<HistoricActivityInstance> activities = historyService.createHistoricActivityInstanceQuery()
                    // .processInstanceId("12501") // 特定的實例
                    .finished() // 完成的
                            // .orderByHistoricActivityInstanceEndTime().asc() // 根據實例完成時間升序排列
                    .list();

            for (HistoricActivityInstance activity : activities) {
                System.out.println("id:" + activity.getActivityId() + "  任務名：" + activity.getActivityName() + "  類型：" + activity.getActivityType() + "  持續時間:" + activity.getDurationInMillis());
            }
            return Result.ok("成功");
        } catch (Exception e) {
            e.printStackTrace();
            return Result.error("失敗");
        }
    }
}

到此這篇關于Vue+LogicFlow+Flowable實現工作流的文章就介紹到這了,更多相關Vue 工作流內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章:

vue中this.$http.post()跨域和請求參數丟失的解決
這篇文章主要介紹了vue中this.$http.post()跨域和請求參數丟失的解決方案，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教
2022-04-04
vue+axios 前端實現的常用攔截的代碼示例
這篇文章主要介紹了vue+axios 前端實現的常用攔截的代碼示例，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
2018-08-08
詳解ESLint在Vue中的使用小結
ESLint是一個QA工具，這篇文章主要介紹了詳解ESLint在Vue中的使用小結，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧
2018-10-10
vue 在服務器端直接修改請求的接口地址
這篇文章主要介紹了vue 在服務器端直接修改請求的接口地址的方法，幫助大家更好的理解和使用vue，感興趣的朋友可以了解下
2020-12-12
VUE2.0+Element-UI+Echarts封裝的組件實例
下面小編就為大家分享一篇VUE2.0+Element-UI+Echarts封裝的組件實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧
2018-03-03
Vue2響應式系統介紹
這篇文章主要介紹了Vue2響應式系統，響應式系統主要實現某個依賴了數據的函數，當所依賴的數據改變的時候，該函數要重新執行，下文更多相關介紹需要的小伙伴可以參考一下
2022-04-04
Vue組件間的樣式?jīng)_突污染問題詳解
默認情況下，寫在.vue組件中的樣式會全局生效，因此很容易造成多個組件之間的樣式?jīng)_突問題。導致組件之間樣式?jīng)_突的根本原因，我們接下來探究一下
2022-11-11
Vue實現驗證碼登錄的方法實例
最近在自己寫頁面,然后寫登錄注冊UI的時候需要一個驗證碼組件,去搜一下沒找到什么合適的,于是自己寫一個,這篇文章主要給大家介紹了關于Vue實現驗證碼登錄的相關資料,需要的朋友可以參考下
2022-03-03
正確更改Ant?Design?of?Vue樣式的問題
這篇文章主要介紹了正確更改Ant?Design?of?Vue樣式的問題，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教
2022-09-09
Vue通過vue-router實現頁面跳轉的全過程
這篇文章主要介紹了Vue通過vue-router實現頁面跳轉的操作步驟,文中有詳細的代碼示例和圖文供大家參考,對大家的學習或工作有一定的幫助,感興趣的朋友可以參考下
2024-04-04