Vue之Element級聯選擇器多選傳值以及回顯方式(樹形結構)
Vue Element級聯選擇器多選傳值以及回顯
后臺需要的數據格式:‘a’, ‘a1’, ‘b’, ‘b1’(字符串以逗號分隔)
后臺返回的數據:同上
級聯組建
<el-cascader ? :options="industrialList" ? placeholder="請選擇產業鏈" ? :props="industrialProps" ? @change="changeIndustrial" ? clearable ? v-model="form.industrialChain" ></el-cascader>
組建選擇處理
changeIndustrial (val) {
? let ids = [];
? val.forEach((item) => {
? ? ids.push(item[item.length - 1]);
? })
? this.industrialChainResult = ids.join(',');
}處理后臺返回數據進行回顯
codes: 后臺返回的逗號分隔的字符串。this.industrialList:從后臺取回來渲染級聯多選的樹形結構數據。categoryResultList:樹形結構子集字段名
? ? // 級聯回顯
? ? industrialChinaShow (codes) {
? ? ? let echoTreeArr = [];
? ? ? let eachAry = codes.split(',')
? ? ? let itemAry = [];//分類樹組件,每一項的code數組
? ? ? // 遞歸分類數據
? ? ? let recursionCategory = (data) => {
? ? ? ? let len = data.length;
? ? ? ? for (let i = 0; i < len; i++) {//循環data參數,匹配回顯的code
? ? ? ? ? itemAry.push(data[i].code);//構建分類樹數組項,入棧
? ? ? ? ? for (let j = 0; j < eachAry.length; j++) {//遍歷子節點分類code,拼湊成數組項code,并終止循環
? ? ? ? ? ? if (eachAry[j] == data[i].code) {//匹配到子節點code
? ? ? ? ? ? ? echoTreeArr.push(JSON.parse(JSON.stringify(itemAry)));//push進樹分類數據
? ? ? ? ? ? ? eachAry.splice(j, 1);//刪除以匹配到的code
? ? ? ? ? ? ? break;
? ? ? ? ? ? }
? ? ? ? ? }
? ? ? ? ? if (eachAry.length <= 0) {//所有回顯code匹配完成后,跳出循環
? ? ? ? ? ? break;
? ? ? ? ? } else if (data[i].categoryResultList && data[i].categoryResultList.length > 0) {// 如果存在子分類,遞歸繼續
? ? ? ? ? ? recursionCategory(data[i].categoryResultList);
? ? ? ? ? }
? ? ? ? ? itemAry.pop();//出棧
? ? ? ? }
? ? ? }
? ? ? recursionCategory(this.industrialList);//調用遞歸
? ? ? this.form.industrialChain = echoTreeArr;
? ? },在后臺返回的地方調用第三部的方法
this.industrialChinaShow(res.industrialChain) // res.industrialChain 后臺返回的'a', 'a1', 'b', 'b1'(字符串以逗號分隔)
好了 就這樣。
element-ui動態級聯選擇器回顯問題解決
場景描述
后臺返回類目數組,其中有一級類目;二級類目,三級類目;這種情況下如何回顯數據
效果圖如下:

先給大家展示一些數據結構,后面會給大家一一講解;尤其是回顯那部分
數據結構如下
id:自己的idlevel:等級pid:父級id,0位第一級name:名字
[
{
id:1, level:0,pid:0,name:'測試1'
},
{
id:2, level:0,pid:0,name:'測試2'
},
{
id:11, level:1,pid:1,name:'測試1-1'
},
{
id:12, level:2,pid:11,name:'測試1-1-1'
}
]先貼上html部分
<el-cascader :props="categoryProps"
v-model="cascaderData"></el-cascader>然后再貼上data數據中的部分
這兒需要注意幾個點:label、value需要改為你數據結構一致的字段;lazyLoad函數中的node有許多參數,如果目前的不能滿足你的需求;你可以查看里面的一些參數是否有你需要的數值;現在data中的lazyLoad函數主要是一些默認值;
cascaderData: '12',
categoryProps: {
emitPath: false,
label:'name', // 字段必須統一
value:'id', // 字段必須統一
lazy: true,
lazyLoad (node, resolve) {
const { level,value } = node;
console.log(value);
let nodes = [];
if (level == 0) { // 第一級
nodes = catalogueList.filter(v=>{return v.level == 0});
}else { // 后面兩級
nodes = catalogueList.filter(v=>{return v.pid == value});
};
resolve(nodes.map(v=>({
id: v.id,
name: v.name,
leaf: level >= 2
})));
}
}, // 級聯選擇器顯示數據回顯的方法
將以下方法賦值給lazyLoad函數即可實現回顯了;
邏輯:
- cascaderData:是選擇的參數最后一級id
- value:我們在選擇是(鼠標點擊選擇的)會觸發并返回id,如果沒有選擇點擊,則返回undefined(我們就在這兒進行判斷是回顯還是手動觸發)
- 先說回顯:threeFind:我們根據有的最后一級id(cascaderData),去查找改數據并查詢到他父級(twoFind);然后根據他父級查找到(第三級)的所有數據(threeData)
- 然后根據二級數據(twoFind)去查找一級(oneFind),然后根據一級(oneFind)查找到二級的所有數據;一級不用查(level==0)全是
- 這個時候開始將對應(二級,三級)的數據放到children下面;children是默認的值;會自動去查找
- 在放置第三級的數據的時候需要注意一個值:leaf,為true時就是結束;也必須寫這個;否則選擇器不會顯示,但是展開的時候是顯示狀態
- 現在回顯也完成了;但是我們從二級或者一級選擇分類的時候,會出現一級或者二級數據跑到二級或者三級目錄下等清楚;這個時候就需要將選中的數據查找到
- 然后將其子集的數據查找出來;并判斷如果是第三級就leaf:true;即可完成
- 趕緊去試試吧!
setLazyLoad(node, resolve) {
const { level,value } = node;
const cascaderData = this.cascaderData;
// 第一級數據
let nodes = [];
nodes = catalogueList.filter(v=>{return v.level == 0});
// 選中的第三級某位數據
const threeFind = catalogueList.find(v=>{return v.id == cascaderData});
if (value) {
// 查詢數據
const unknownFind = catalogueList.find(v=>v.id == value);
if (level == 1) {
let twoData = catalogueList.filter(v=>v.pid == unknownFind.id);
nodes = twoData; // 第二級
}else if (level == 2) {
let threeData = catalogueList.filter(v=>v.pid == unknownFind.id);
nodes = threeData.map(v=>{return {id:v.id,name:v.name,level:v.level,leaf:true}}); // 第三級
};
}else {
// 選中的第二級某位數據
let twoFind = catalogueList.find(v=>v.id == threeFind.pid);
// 第三級數據
let threeData = catalogueList.filter(v=>v.pid == twoFind.id);
// 選中的第一級某位數據
const oneFind = catalogueList.find(v=>{return v.id == twoFind.pid});
// 第二級數據
let twoData = catalogueList.filter(v=>{return v.pid == oneFind.id});
// nodes = nodes.map(v=>{return {id:v.id,name:v.name,level:v.level}}); // 第一級
const oneIndex = nodes.findIndex(v=>{return v.id == oneFind.id});
nodes[oneIndex].children = twoData; // 第二級
const twoIndex = nodes[oneIndex].children.findIndex(v=>v.id == twoFind.id);
nodes[oneIndex].children[twoIndex].children = threeData.map(v=>{ // 第三季
return {
id:v.id,
name:v.name,
level:v.level,
leaf: true,
}
});
}
resolve(nodes);
},總結
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。
相關文章
Vue使用Antd中a-table實現表格數據列合并展示示例代碼
文章介紹了如何在Vue中使用Ant?Design的a-table組件實現表格數據列合并展示,通過處理函數對源碼數據進行操作,處理相同數據時合并列單元格2024-11-11
Vue3使用Proxy實現數據監聽的原因分析
在本篇文章里小編給大家整理的是一篇關于Vue3使用Proxy實現數據監聽的原因分析內容,有需要的朋友們可以跟著學習參考下。2021-11-11
使用websocket和Vue2中的props實時更新數據方式
這篇文章主要介紹了使用websocket和Vue2中的props實時更新數據方式,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-08-08
Vue無法讀取HTMLCollection列表的length問題解決
這篇文章主要介紹了Vue無法讀取HTMLCollection列表的length問題解決方案,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-03-03
vuejs開發組件分享之H5圖片上傳、壓縮及拍照旋轉的問題處理
這篇文章主要介紹了vuejs開發組件分享之H5圖片上傳、壓縮及拍照旋轉的問題處理,需要的朋友可以參考下2017-03-03

