# 1. 安裝MySQL YUM源
wget https://dev.mysql.com/get/mysql80-community-release-el7-7.noarch.rpm
rpm -ivh mysql80-community-release-el7-7.noarch.rpm
# 2. 安裝MySQL服務器（忽略GPG檢查，避免版本兼容問題）
yum install -y mysql-community-server --nogpgcheck
# 3. 啟動MySQL并設置開機自啟
systemctl start mysqld
systemctl enable mysqld
# 4. 獲取初始密碼
initial_pass=$(grep 'temporary password' /var/log/mysqld.log | awk '{print $NF}')
echo "初始密碼：$initial_pass"

# 1. 登錄MySQL并修改root密碼（需符合復雜度：大小寫+數字+特殊字符）
mysql -u root -p"$initial_pass" -e "ALTER USER 'root'@'localhost' IDENTIFIED BY 'MySQL@123456'; FLUSH PRIVILEGES;"
# 2. 遠程訪問授權（生產環境建議限制IP，此處為測試放開）
mysql -u root -p"MySQL@123456" -e "CREATE USER 'root'@'%' IDENTIFIED BY 'MySQL@123456'; GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION; FLUSH PRIVILEGES;"

[mysqld]
# 基礎配置
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
lower_case_table_names=1
character-set-server=utf8mb4
collation-server=utf8mb4_unicode_ci
# MGR核心配置
server-id=30  # 每個節點唯一，建議用IP最后一段
gtid_mode=ON  # 開啟GTID，MGR必需
enforce_gtid_consistency=ON
master_info_repository=TABLE
relay_log_info_repository=TABLE
binlog_checksum=NONE
log_slave_updates=ON
binlog_format=ROW
transaction_write_set_extraction=XXHASH64  # MGR用于檢測沖突的哈希算法
loose-group_replication_group_name="aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa"  # 固定UUID，所有節點一致
loose-group_replication_start_on_boot=OFF  # 不隨MySQL啟動自動啟動MGR
loose-group_replication_local_address="192.168.1.30:33061"  # 當前節點MGR通信地址
loose-group_replication_group_seeds="192.168.1.30:33061,192.168.1.31:33061,192.168.1.32:33061"  # 所有節點通信地址
loose-group_replication_bootstrap_group=OFF  # 僅初始化集群時設為ON
loose-group_replication_single_primary_mode=ON  # 單主模式（核心：自動故障切換依賴此模式）
loose-group_replication_enforce_update_everywhere_checks=OFF  # 單主模式設為OFF
loose-group_replication_auto_increment_increment=7  # 避免主鍵沖突

server-id=31
loose-group_replication_local_address="192.168.1.31:33061"

server-id=32
loose-group_replication_local_address="192.168.1.32:33061"

# 重啟MySQL
systemctl restart mysqld
# 驗證GTID是否開啟（輸出ON即正常）
mysql -u root -p"MySQL@123456" -e "SHOW VARIABLES LIKE 'gtid_mode';"

mysql -u root -p"MySQL@123456" << EOF
# 創建MGR通信用戶
CREATE USER 'mgr_repl'@'%' IDENTIFIED BY 'MGR@123456';
# 授予MGR所需權限
GRANT REPLICATION SLAVE ON *.* TO 'mgr_repl'@'%';
GRANT GROUP_REPLICATION_ADMIN ON *.* TO 'mgr_repl'@'%';
FLUSH PRIVILEGES;
# 配置MGR插件使用該用戶
CHANGE MASTER TO MASTER_USER='mgr_repl', MASTER_PASSWORD='MGR@123456' FOR CHANNEL 'group_replication_recovery';
EOF

mysql -u root -p"MySQL@123456" << EOF
# 加載MGR插件（8.0+默認內置，無需手動安裝）
INSTALL PLUGIN group_replication SONAME 'group_replication.so';
# 啟動集群引導（僅第一次執行）
SET GLOBAL group_replication_bootstrap_group=ON;
START GROUP_REPLICATION;
SET GLOBAL group_replication_bootstrap_group=OFF;
# 驗證集群狀態（輸出ON即正常）
SELECT * FROM performance_schema.replication_group_members;
EOF

mysql -u root -p"MySQL@123456" << EOF
# 加載MGR插件
INSTALL PLUGIN group_replication SONAME 'group_replication.so';
# 加入集群
START GROUP_REPLICATION;
# 驗證節點狀態
SELECT * FROM performance_schema.replication_group_members;
EOF

mysql -u root -p"MySQL@123456" -e "SELECT MEMBER_HOST, MEMBER_ROLE, MEMBER_STATE FROM performance_schema.replication_group_members;"

# 節點1執行：創建測試庫和表
mysql -u root -p"MySQL@123456" << EOF
CREATE DATABASE IF NOT EXISTS mgr_test;
USE mgr_test;
CREATE TABLE user (id INT PRIMARY KEY AUTO_INCREMENT, name VARCHAR(50));
INSERT INTO user (name) VALUES ('MGR測試用戶1'), ('MGR測試用戶2');
EOF
# 節點2/3執行：查詢數據（應同步成功）
mysql -u root -p"MySQL@123456" -e "SELECT * FROM mgr_test.user;"

# 節點1執行：停止MySQL服務，模擬故障
systemctl stop mysqld

mysql -u root -p"MySQL@123456" -e "SELECT MEMBER_HOST, MEMBER_ROLE, MEMBER_STATE FROM performance_schema.replication_group_members;"

# 節點2執行：插入數據
mysql -u root -p"MySQL@123456" << EOF
USE mgr_test;
INSERT INTO user (name) VALUES ('故障切換后寫入');
EOF
# 節點3執行：查詢數據（應同步新數據）
mysql -u root -p"MySQL@123456" -e "SELECT * FROM mgr_test.user;"

# 節點1執行：重啟MySQL
systemctl start mysqld
# 重新加入集群
mysql -u root -p"MySQL@123456" << EOF
START GROUP_REPLICATION;
# 驗證狀態（此時節點1為SECONDARY）
SELECT MEMBER_HOST, MEMBER_ROLE FROM performance_schema.replication_group_members;
EOF

loose-group_replication_start_on_boot=ON

# 1. 集群成員狀態
SELECT MEMBER_HOST, MEMBER_ROLE, MEMBER_STATE FROM performance_schema.replication_group_members;
# 2. MGR運行狀態
SHOW STATUS LIKE 'group_replication%';
# 3. 事務沖突（生產環境需監控）
SELECT * FROM performance_schema.replication_group_conflicts;