殺死指定進程名稱的小VBS

更新時間：2016年12月03日 20:55:22 投稿：mdxy-dxy

這篇文章主要介紹了殺死指定進程名稱的小VBS,需要的朋友可以參考下

以下是一小段殺死指定進程名字的小vbs，希望對大家有幫助。

Function KillProc(strProcName)
On Error Resume Next
 Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
 Set arrProcesses = objWMIService.ExecQuery( "select * from win32_process where Name ='"&strProcName&"'" )
 For Each proccess In arrProcesses
 proccess.Terminate 0 
 Next
End Function

VBS命令-進程操作代碼(檢測進程, 結束進程)

//檢測進程
進程名 = "qq.exe"
返回值 = IsProcess(進程名)
If 返回值 = True Then
MessageBox "發現進程"
ElseIf 返回值 = False Then
MessageBox "沒有發現進程"
End If
//檢測進程 優化后的代碼
If IsProcess("qq.exe") = True Then 
MessageBox "發現進程"
Else 
MessageBox "沒有發現進程"
End If
//檢測進程組
進程組 = "qq.exe|notepad.exe"
返回值 = IsProcessEx(進程組)
If 返回值 = True Then
MessageBox "發現進程"
ElseIf 返回值 = False Then
MessageBox "沒有發現進程"
End If
//檢測進程組 優化后的代碼
If IsProcessEx("qq.exe|notepad.exe") = True Then 
MessageBox "發現進程"
Else 
MessageBox "沒有發現進程"
End If
//結束進程 前臺執行
進程名 = "qq.exe"
Call CloseProcess(進程名, 1)
//結束進程 后臺執行
進程名 = "qq.exe"
Call CloseProcess(進程名, 0)
//結束進程組 前臺執行
進程組 = "qq.exe|notepad.exe"
Call CloseProcessEx(進程組, 1)
//結束進程組 后臺執行
進程組 = "qq.exe|notepad.exe"
Call CloseProcessEx(進程組, 0)
//實例應用 結束進程 前臺執行 10秒超時
進程名 = "qq.exe"
For 10
Call CloseProcess(進程名,1)
Delay 1000
返回值 = IsProcess(進程名)
If 返回值 = False Then
Exit For
End If
Next
If 返回值=True Then
MessageBox "結束進程失敗"
Else
MessageBox "結束進程成功"
End If
//實例應用 結束進程 前臺執行 優化后的代碼(直到型循環) 有些進程VBS檢測不到 所以先關閉后檢測
Do
Call CloseProcess("qq.exe",1)
Delay 1000
Loop While IsProcess("qq.exe")=True
MessageBox "結束進程成功"
//實例應用 結束進程組 后臺執行 10秒超時
進程組 = "qq.exe|notepad.exe"
For 10
Call CloseProcessEx(進程組,0)
Delay 1000
返回值 = IsProcessEx(進程組)
If 返回值 = False Then
Exit For
End If
Next
If 返回值=True Then
MessageBox "結束進程失敗"
Else
MessageBox "結束進程成功"
End If
//實例應用 結束進程組 后臺執行 優化后的代碼(直到型循環) 有些進程VBS檢測不到 所以先關閉后檢測
Do
Call CloseProcessEx( "qq.exe|notepad.exe",0)
Delay 1000
Loop While IsProcessEx( "qq.exe|notepad.exe")=True
MessageBox "結束進程成功"
//函數 子程序部分代碼
//檢測進程
Function IsProcess(ExeName)
Dim WMI, Obj, Objs,i
IsProcess = False
Set WMI = GetObject("WinMgmts:")
Set Objs = WMI.InstancesOf("Win32_Process")
For Each Obj In Objs
If InStr(UCase(ExeName),UCase(Obj.Description)) <> 0 Then
IsProcess = True
Exit For
End If
Next
Set Objs = Nothing
Set WMI = Nothing
End Function
//結束進程
Sub CloseProcess(ExeName,RunMode)
dim ws
Set ws = createobject("Wscript.Shell")
ws.run "cmd.exe /C Taskkill /f /im " & ExeName,RunMode
Set ws = Nothing
End Sub
//檢測進程組
Function IsProcessEx(ExeName)
Dim WMI, Obj, Objs,ProcessName,i
IsProcessEx = False
Set WMI = GetObject("WinMgmts:")
Set Objs = WMI.InstancesOf("Win32_Process")
ProcessName=Split(ExeName,"|")
For Each Obj In Objs
For i=0 to UBound(ProcessName)
If InStr(UCase(ProcessName(i)),UCase(Obj.Description)) <> 0 Then
IsProcessEx = True
Exit For
End If
Next
Next
Set Objs = Nothing
Set WMI = Nothing
End Function
//結束進程組
Sub CloseProcessEx(ExeName,RunMode)
dim ws,ProcessName,CmdCode,i
ProcessName = Split(ExeName, "|")
For i=0 to UBound(ProcessName)
CmdCode=CmdCode & " /im " & ProcessName(i)
Next
Set ws = createobject("Wscript.Shell")
ws.run "cmd.exe /C Taskkill /f" & CmdCode,RunMode
Set ws = Nothing
End Sub