Linux下Docker安裝和使用教程

更新時間：2016年10月15日 09:27:48 投稿：mrr

Docker是一個開源的引擎，可以輕松的為任何應用創建一個輕量級的、可移植的、自給自足的容器。這篇文章主要介紹了Linux下Docker安裝和使用教程的相關資料,需要的朋友可以參考下

Docker是一個開源的引擎，可以輕松的為任何應用創建一個輕量級的、可移植的、自給自足的容器。

開發者在筆記本上編譯測試通過的容器可以批量地在生產環境中部署，包括VMs(虛擬機)、bare metal、OpenStack集群和其他的基礎應用平臺。

Docker的源代碼全部是用Go語言寫的。

一、基礎環境

1、角色、ip、版本、內核

serverA 10.1.10.236 3.16.0-4-amd64 8.1 docket
docket 1.6.2

二、安裝docter

1、添加源

echo "deb http://http.debian.net/debian jessie-backports main" >> /etc/apt/sources.list

2、更新源

apt-get update

3、安裝docker.io包

apt-get install docker.io
Reading package lists... Done
Building dependency tree 
Reading state information... Done
The following extra packages will be installed:
aufs-tools cgroupfs-mount git git-man libapparmor1 liberror-perl libnih-dbus1 libnih1 makedev mountall plymouth
Suggested packages:
btrfs-tools debootstrap lxc rinse git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-cvs git-mediawiki git-svn desktop-base
plymouth-themes
The following NEW packages will be installed:
aufs-tools cgroupfs-mount docker.io git git-man libapparmor1 liberror-perl libnih-dbus1 libnih1 makedev mountall plymouth
0 upgraded, 12 newly installed, 0 to remove and 54 not upgraded.
Need to get 9,986 kB of archives.
After this operation, 47.2 MB of additional disk space will be used.
Do you want to continue? [Y/n]

4、查看版本

docker --version
Docker version 1.6.2, build 7c8fca2

5、啟動服務

/etc/init.d/docker start
[ ok ] Starting docker (via systemctl): docker.service.

6、拉取debian和CentOS鏡像

1)拉取debian鏡像

docker pull debian
latest: Pulling from debian
843e2bded498: Pull complete 
8c00acfb0175: Pull complete 
debian:latest: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security.
Digest: sha256:d9168a2c1889b4c9d44952a23065c29b0656237909d618328275f42065602354
Status: Downloaded newer image for debian:latest

2)拉取centos鏡像

docker pull centos
Pulling repository centos
0f73ae75014f: Download complete 
47d44cb6f252: Download complete 
f6f39725d938: Download complete 
f9a8cbc8dd13: Download complete 
f37e6a610a37: Download complete 
Status: Downloaded newer image for centos:latest

7、查看鏡像

docker images
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
debian latest 8c00acfb0175 3 weeks ago 125.2 MB
centos latest 0f73ae75014f 3 weeks ago 172.3 MB

8、運行名為debian鏡像的容器(虛擬

docker images
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
debian latest 8c00acfb0175 3 weeks ago 125.2 MB
centos latest 0f73ae75014f 3 weeks ago 172.3 MB

出1個debian系統)

1)運行debian鏡像的容器

docker run -i -t debian

2)查看版本

root@10.1.10.236:~# docker run debian cat /etc/debian_version
8.2

3)查看IP(是dhcp獲得每次獲得都不一樣)

root@10.1.10.236:~# docker run debian ip 
a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
valid_lft forever preferred_lft forever
24: eth0: <NO-CARRIER,BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state DOWN group default 
link/ether 02:42:ac:11:00:0b brd ff:ff:ff:ff:ff:ff
inet 172.17.0.11/16 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::42:acff:fe11:b/64 scope link tentative 
valid_lft forever preferred_lft forever

4)查看內核

root@10.1.10.236:~# docker run debian uname -r
3.16.0-4-amd64

5)查看硬盤分區情況

root@10.1.10.236:~# docker run -i -t debian df -Th
Filesystem Type Size Used Avail Use% Mounted on
none aufs 9.1G 1.6G 7.1G 18% /
tmpfs tmpfs 115M 0 115M 0% /dev
shm tmpfs 64M 0 64M 0% /dev/shm
/dev/sda1 ext4 9.1G 1.6G 7.1G 18% /etc/hosts

9、運行名為centos鏡像的容器(虛擬出1個centos系統)

1)運行centos鏡像的容器

docker run -i -t centos

2)查看版本

root@10.1.10.236:~# docker run centos cat /etc/RedHat-release
CentOS Linux release 7.1.1503 (Core)

3)查看內核

root@10.1.10.236:~# docker run centos uname -r
3.16.0-4-amd64

4)查看ip

root@10.1.10.236:~# docker run centos ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
valid_lft forever preferred_lft forever
46: eth0: <NO-CARRIER,BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state DOWN 
link/ether 02:42:ac:11:00:16 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.22/16 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::42:acff:fe11:16/64 scope link tentative 
valid_lft forever preferred_lft forever

5)查看硬盤分區情況

root@10.1.10.236:~# docker run centos df -Th
Filesystem Type Size Used Avail Use% Mounted on
rootfs rootfs 9.1G 1.6G 7.1G 18% /
none aufs 9.1G 1.6G 7.1G 18% /
tmpfs tmpfs 115M 0 115M 0% /dev
shm tmpfs 64M 0 64M 0% /dev/shm
/dev/sda1 ext4 9.1G 1.6G 7.1G 18% /etc/hosts
tmpfs tmpfs 115M 0 115M 0% /proc/kcore
tmpfs tmpfs 115M 0 115M 0% /proc/timer_stats

以上所述是小編給大家介紹的Linux下Docker安裝和使用教程，希望對大家有所幫助，如果大家有任何疑問歡迎給我留言！

您可能感興趣的文章: