CentOS命令行下裝oracle 12c的方法(命令行模式安裝）
更新時間：2016年09月16日 21:12:25 作者：雅冰石
這篇文章主要介紹了CentOS命令行下裝oracle 12c的方法(命令行模式安裝）,需要的朋友可以參考下
實驗環境：
1：安裝oracle所需軟件包
Oracle 12c所需的rpm包如下：
binutils-2.20.51.0.2-5.11.el6 (x86_64) compat-libcap1-1.10-1 (x86_64) compat-libstdc++-33-3.2.3-69.el6 (x86_64) compat-libstdc++-33-3.2.3-69.el6 (i686) gcc-4.4.4-13.el6 (x86_64) gcc-c++-4.4.4-13.el6 (x86_64) glibc-2.12-1.7.el6 (i686) glibc-2.12-1.7.el6 (x86_64) glibc-devel-2.12-1.7.el6 (x86_64) glibc-devel-2.12-1.7.el6 (i686) ksh libgcc-4.4.4-13.el6 (i686) libgcc-4.4.4-13.el6 (x86_64) libstdc++-4.4.4-13.el6 (x86_64) libstdc++-4.4.4-13.el6 (i686) libstdc++-devel-4.4.4-13.el6 (x86_64) libstdc++-devel-4.4.4-13.el6 (i686) libaio-0.3.107-10.el6 (x86_64) libaio-0.3.107-10.el6 (i686) libaio-devel-0.3.107-10.el6 (x86_64) libaio-devel-0.3.107-10.el6 (i686) libXext-1.1 (x86_64) libXext-1.1 (i686) libXtst-1.0.99.2 (x86_64) libXtst-1.0.99.2 (i686) libX11-1.3 (x86_64) libX11-1.3 (i686) libXau-1.0.5 (x86_64) libXau-1.0.5 (i686) libxcb-1.5 (x86_64) libxcb-1.5 (i686) libXi-1.3 (x86_64) libXi-1.3 (i686) make-3.81-19.el6 sysstat-9.0.4-11.el6 (x86_64)
[root@ser6-51 mongodb]# yum install binutils compat-libcap1 compat-libstdc++-33 gcc gcc-c++ glibc glibc-devel ksh libgcc libstdc++ libstdc++-devel libaio libaio-devel libXext libXtst libX11 libXau libxcb libXi make sysstat
Loaded plugins: fastestmirror, security Determining fastest mirrors * base: mirrors.163.com * extras: mirrors.aliyun.com * updates: mirrors.163.com base | 3.7 kB 00:00 extras | 3.4 kB 00:00 updates | 3.4 kB 00:00 updates/primary_db | 3.9 MB 00:04 Setting up Install Process Package gcc-4.4.7-11.el6.x86_64 already installed and latest version Package gcc-c++-4.4.7-11.el6.x86_64 already installed and latest version Package libgcc-4.4.7-11.el6.x86_64 already installed and latest version Package libstdc++-4.4.7-11.el6.x86_64 already installed and latest version Package libstdc++-devel-4.4.7-11.el6.x86_64 already installed and latest version Package libaio-0.3.107-10.el6.x86_64 already installed and latest version Package libXau-1.0.6-4.el6.x86_64 already installed and latest version Package 1:make-3.81-20.el6.x86_64 already installed and latest version Resolving Dependencies --> Running transaction check ---> Package binutils.x86_64 0:2.20.51.0.2-5.36.el6 will be updated ---> Package binutils.x86_64 0:2.20.51.0.2-5.42.el6 will be an update ---> Package compat-libcap1.x86_64 0:1.10-1 will be installed ---> Package compat-libstdc++-33.x86_64 0:3.2.3-69.el6 will be installed ---> Package glibc.x86_64 0:2.12-1.132.el6 will be updated --> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-headers-2.12-1.132.el6.x86_64 --> Processing Dependency: glibc = 2.12-1.132.el6 for package: glibc-common-2.12-1.132.el6.x86_64 ---> Package glibc.x86_64 0:2.12-1.149.el6_6.9 will be an update ---> Package glibc-devel.x86_64 0:2.12-1.132.el6 will be updated ---> Package glibc-devel.x86_64 0:2.12-1.149.el6_6.9 will be an update ---> Package ksh.x86_64 0:20120801-21.el6_6.3 will be installed ---> Package libX11.x86_64 0:1.5.0-4.el6 will be updated ---> Package libX11.x86_64 0:1.6.0-2.2.el6 will be an update --> Processing Dependency: libX11-common = 1.6.0-2.2.el6 for package: libX11-1.6.0-2.2.el6.x86_64 ---> Package libXext.x86_64 0:1.3.1-2.el6 will be updated ---> Package libXext.x86_64 0:1.3.2-2.1.el6 will be an update ---> Package libXi.x86_64 0:1.6.1-3.el6 will be updated ---> Package libXi.x86_64 0:1.7.2-2.2.el6 will be an update ---> Package libXtst.x86_64 0:1.2.1-2.el6 will be updated ---> Package libXtst.x86_64 0:1.2.2-2.1.el6 will be an update ---> Package libaio-devel.x86_64 0:0.3.107-10.el6 will be installed ---> Package libxcb.x86_64 0:1.8.1-1.el6 will be updated ---> Package libxcb.x86_64 0:1.9.1-2.el6 will be an update ---> Package sysstat.x86_64 0:9.0.4-22.el6 will be updated ---> Package sysstat.x86_64 0:9.0.4-27.el6 will be an update --> Running transaction check ---> Package glibc-common.x86_64 0:2.12-1.132.el6 will be updated ---> Package glibc-common.x86_64 0:2.12-1.149.el6_6.9 will be an update ---> Package glibc-headers.x86_64 0:2.12-1.132.el6 will be updated ---> Package glibc-headers.x86_64 0:2.12-1.149.el6_6.9 will be an update ---> Package libX11-common.noarch 0:1.5.0-4.el6 will be updated ---> Package libX11-common.noarch 0:1.6.0-2.2.el6 will be an update --> Finished Dependency Resolution Dependencies Resolved ========================================================================================================================================================================================================= Package Arch Version Repository Size ========================================================================================================================================================================================================= Installing: compat-libcap1 x86_64 1.10-1 base 17 k compat-libstdc++-33 x86_64 3.2.3-69.el6 base 183 k ksh x86_64 20120801-21.el6_6.3 updates 758 k libaio-devel x86_64 0.3.107-10.el6 base 13 k Updating: binutils x86_64 2.20.51.0.2-5.42.el6 base 2.8 M glibc x86_64 2.12-1.149.el6_6.9 updates 3.8 M glibc-devel x86_64 2.12-1.149.el6_6.9 updates 984 k libX11 x86_64 1.6.0-2.2.el6 base 586 k libXext x86_64 1.3.2-2.1.el6 base 35 k libXi x86_64 1.7.2-2.2.el6 base 37 k libXtst x86_64 1.2.2-2.1.el6 base 19 k libxcb x86_64 1.9.1-2.el6 base 110 k sysstat x86_64 9.0.4-27.el6 base 233 k Updating for dependencies: glibc-common x86_64 2.12-1.149.el6_6.9 updates 14 M glibc-headers x86_64 2.12-1.149.el6_6.9 updates 612 k libX11-common noarch 1.6.0-2.2.el6 base 192 k Transaction Summary ========================================================================================================================================================================================================= Install 4 Package(s) Upgrade 12 Package(s) Total download size: 24 M Is this ok [y/N]: y Downloading Packages: (1/16): binutils-2.20.51.0.2-5.42.el6.x86_64.rpm | 2.8 MB 00:02 (2/16): compat-libcap1-1.10-1.x86_64.rpm | 17 kB 00:00 (3/16): compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm | 183 kB 00:00 (4/16): glibc-2.12-1.149.el6_6.9.x86_64.rpm | 3.8 MB 00:05 (5/16): glibc-common-2.12-1.149.el6_6.9.x86_64.rpm | 14 MB 00:13 (6/16): glibc-devel-2.12-1.149.el6_6.9.x86_64.rpm | 984 kB 00:02 (7/16): glibc-headers-2.12-1.149.el6_6.9.x86_64.rpm | 612 kB 00:01 (8/16): ksh-20120801-21.el6_6.3.x86_64.rpm | 758 kB 00:01 (9/16): libX11-1.6.0-2.2.el6.x86_64.rpm | 586 kB 00:01 (10/16): libX11-common-1.6.0-2.2.el6.noarch.rpm | 192 kB 00:00 (11/16): libXext-1.3.2-2.1.el6.x86_64.rpm | 35 kB 00:00 (12/16): libXi-1.7.2-2.2.el6.x86_64.rpm | 37 kB 00:00 (13/16): libXtst-1.2.2-2.1.el6.x86_64.rpm | 19 kB 00:00 (14/16): libaio-devel-0.3.107-10.el6.x86_64.rpm | 13 kB 00:00 (15/16): libxcb-1.9.1-2.el6.x86_64.rpm | 110 kB 00:00 (16/16): sysstat-9.0.4-27.el6.x86_64.rpm | 233 kB 00:00 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 712 kB/s | 24 MB 00:35 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Updating : glibc-common-2.12-1.149.el6_6.9.x86_64 1/28 Updating : glibc-2.12-1.149.el6_6.9.x86_64 2/28 Updating : glibc-headers-2.12-1.149.el6_6.9.x86_64 3/28 Updating : libxcb-1.9.1-2.el6.x86_64 4/28 Updating : libX11-common-1.6.0-2.2.el6.noarch 5/28 Updating : libX11-1.6.0-2.2.el6.x86_64 6/28 Updating : libXext-1.3.2-2.1.el6.x86_64 7/28 Updating : libXi-1.7.2-2.2.el6.x86_64 8/28 Updating : libXtst-1.2.2-2.1.el6.x86_64 9/28 Updating : glibc-devel-2.12-1.149.el6_6.9.x86_64 10/28 Installing : compat-libcap1-1.10-1.x86_64 11/28 Updating : sysstat-9.0.4-27.el6.x86_64 12/28 Installing : ksh-20120801-21.el6_6.3.x86_64 13/28 Installing : compat-libstdc++-33-3.2.3-69.el6.x86_64 14/28 Updating : binutils-2.20.51.0.2-5.42.el6.x86_64 15/28 Installing : libaio-devel-0.3.107-10.el6.x86_64 16/28 Cleanup : glibc-devel-2.12-1.132.el6.x86_64 17/28 Cleanup : libXtst-1.2.1-2.el6.x86_64 18/28 Cleanup : glibc-headers-2.12-1.132.el6.x86_64 19/28 Cleanup : libXi-1.6.1-3.el6.x86_64 20/28 Cleanup : libXext-1.3.1-2.el6.x86_64 21/28 Cleanup : libX11-1.5.0-4.el6.x86_64 22/28 Cleanup : libxcb-1.8.1-1.el6.x86_64 23/28 Cleanup : binutils-2.20.51.0.2-5.36.el6.x86_64 24/28 Cleanup : sysstat-9.0.4-22.el6.x86_64 25/28 Cleanup : libX11-common-1.5.0-4.el6.noarch 26/28 Cleanup : glibc-common-2.12-1.132.el6.x86_64 27/28 Cleanup : glibc-2.12-1.132.el6.x86_64 28/28 Verifying : glibc-devel-2.12-1.149.el6_6.9.x86_64 1/28 Verifying : libaio-devel-0.3.107-10.el6.x86_64 2/28 Verifying : libX11-1.6.0-2.2.el6.x86_64 3/28 Verifying : compat-libcap1-1.10-1.x86_64 4/28 Verifying : libXext-1.3.2-2.1.el6.x86_64 5/28 Verifying : glibc-2.12-1.149.el6_6.9.x86_64 6/28 Verifying : sysstat-9.0.4-27.el6.x86_64 7/28 Verifying : ksh-20120801-21.el6_6.3.x86_64 8/28 Verifying : compat-libstdc++-33-3.2.3-69.el6.x86_64 9/28 Verifying : glibc-headers-2.12-1.149.el6_6.9.x86_64 10/28 Verifying : binutils-2.20.51.0.2-5.42.el6.x86_64 11/28 Verifying : libXtst-1.2.2-2.1.el6.x86_64 12/28 Verifying : libXi-1.7.2-2.2.el6.x86_64 13/28 Verifying : glibc-common-2.12-1.149.el6_6.9.x86_64 14/28 Verifying : libxcb-1.9.1-2.el6.x86_64 15/28 Verifying : libX11-common-1.6.0-2.2.el6.noarch 16/28 Verifying : glibc-2.12-1.132.el6.x86_64 17/28 Verifying : glibc-devel-2.12-1.132.el6.x86_64 18/28 Verifying : glibc-headers-2.12-1.132.el6.x86_64 19/28 Verifying : glibc-common-2.12-1.132.el6.x86_64 20/28 Verifying : binutils-2.20.51.0.2-5.36.el6.x86_64 21/28 Verifying : libXi-1.6.1-3.el6.x86_64 22/28 Verifying : libX11-common-1.5.0-4.el6.noarch 23/28 Verifying : sysstat-9.0.4-22.el6.x86_64 24/28 Verifying : libxcb-1.8.1-1.el6.x86_64 25/28 Verifying : libXtst-1.2.1-2.el6.x86_64 26/28 Verifying : libX11-1.5.0-4.el6.x86_64 27/28 Verifying : libXext-1.3.1-2.el6.x86_64 28/28 Installed: compat-libcap1.x86_64 0:1.10-1 compat-libstdc++-33.x86_64 0:3.2.3-69.el6 ksh.x86_64 0:20120801-21.el6_6.3 libaio-devel.x86_64 0:0.3.107-10.el6 Updated: binutils.x86_64 0:2.20.51.0.2-5.42.el6 glibc.x86_64 0:2.12-1.149.el6_6.9 glibc-devel.x86_64 0:2.12-1.149.el6_6.9 libX11.x86_64 0:1.6.0-2.2.el6 libXext.x86_64 0:1.3.2-2.1.el6 libXi.x86_64 0:1.7.2-2.2.el6 libXtst.x86_64 0:1.2.2-2.1.el6 libxcb.x86_64 0:1.9.1-2.el6 sysstat.x86_64 0:9.0.4-27.el6 Dependency Updated: glibc-common.x86_64 0:2.12-1.149.el6_6.9 glibc-headers.x86_64 0:2.12-1.149.el6_6.9 libX11-common.noarch 0:1.6.0-2.2.el6 Complete!
驗證 Oracle 所需要的系統依賴程序包是否完整。
[root@ser6-51 mongodb]# rpm -qa binutils compat-libcap1 compat-libstdc++-33 gcc gcc-c++ glibc glibc-devel ksh libgcc libstdc++ libstdc++-devel libaio libaio-devel libXext libXtst libX11 libXau libxcb libXi make sysstat
libgcc-4.4.7-11.el6.x86_64 libstdc++-4.4.7-11.el6.x86_64 gcc-c++-4.4.7-11.el6.x86_64 glibc-2.12-1.149.el6_6.9.x86_64 libX11-1.6.0-2.2.el6.x86_64 glibc-devel-2.12-1.149.el6_6.9.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 make-3.81-20.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libXau-1.0.6-4.el6.x86_64 libstdc++-devel-4.4.7-11.el6.x86_64 libXext-1.3.2-2.1.el6.x86_64 libXtst-1.2.2-2.1.el6.x86_64 compat-libcap1-1.10-1.x86_64 ksh-20120801-21.el6_6.3.x86_64 binutils-2.20.51.0.2-5.42.el6.x86_64 gcc-4.4.7-11.el6.x86_64 libxcb-1.9.1-2.el6.x86_64 libXi-1.7.2-2.2.el6.x86_64 sysstat-9.0.4-27.el6.x86_64 libaio-devel-0.3.107-10.el6.x86_64
2：對OS進行配置
2.1 創建相關用戶和用戶組
groupadd oinstall
groupadd oper
groupadd dba
useradd -g oinstall -G dba,oper oracle
2.2 修改oracle用戶的密碼
passwd oracle
2.3 修改系統參數
vi /etc/sysctl.conf
添加：
fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.shmall = 2097152 kernel.shmmax = 536870912 kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048586
運行sysctl -p應用以上參數
/sbin/sysctl -p
2.4 修改用戶Limits
vi /etc/security/limits.conf
新增如下內容：
oracle soft nofile 65536
oracle hard nofile 65536
oracle soft nproc 16384
oracle hard nproc 16384
oracle stack nproc 10240
oracle stack nproc 10240
2.5 創建相關目錄
mkdir -p /u01/app/oracle/product/12c/db_1
mkdir –p /u01/app/oracle/oradata
mkdir –p /u01/app/oracle/flash_recovery_area
mkdir -p /u01/app/oracle/archlog
chown -R oracle:oinstall /u01
2.6 配置環境變量
su - oracle
vi .bash_profile
添加：
# Oracle Settings COLUMNS=132; export COLUMNS LINES=47; export LINES EDITOR=vi; export EDITOR TMP=/tmp; export TMP TMPDIR=$TMP; export TMPDIR ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE ORACLE_HOME=$ORACLE_BASE/product/12c/db_1; export ORACLE_HOME ORACLE_SID=orcl; export ORACLE_SID SHLIB_PATH=$LD_LIBRARY_PATH;export SHLIB_PATH NLS_LANG=American_America.zhs16gbk;export NLS_LANG ORA_NLS10=$ORACLE_HOME/nls/data;export ORA_NLS10 TNS_ADMIN=$ORACLE_HOME/network/admin;export TNS_ADMIN ORACLE_TERM=xterm; export ORACLE_TERM PATH=/usr/sbin:$PATH; export PATH PATH=$ORACLE_HOME/bin:$PATH; export PATH LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH alias glance=/opt/perf/bin/glance:x alias gohome='cd /u01/app/oracle/product/10.2.0' alias cdb='cd /u01/app/oracle/admin/orcl/bdump' alias cdu='cd /u01/app/oracle/admin/orcl/udump'
--里面的內容可以根據實際情況進行改動，如可以改動ORACLE_SID.
修改完用：source .bash_profile生效。
2.7修改/etc/hosts
[oracle@ser6-51 ~]$ cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
[oracle@ser6-51 ~]$ hostname
ser6-51
把127.0.0.1那一行改為：127.0.0.1 ser6-51
2.8修改操作系統發行版本
由于 oracle 還沒有推出支持 CentOS 的安裝包，所以需要修改發行版本，以便通過 oracle 的安裝檢查。
vi /etc/redhat-release
把CentOS release 6.5 (Final) 注釋掉，前面加上一行redhat-4，當oracle安裝完成后,再修改回來。
如：
redhat-4
#CentOS release 6.5 (Final)
2.9 關閉SELINUX
vi /etc/selinux/config
將SELINUX那一行改成：
SELINUX=disabled
3：安裝
3.1 解壓安裝包
[root@ser6-51 download]# ls -ltr
-rw-r--r-- 1 root root 1014530602 Jul 6 15:07 linuxamd64_12102_database_2of2.zip
-rw-r--r-- 1 root root 1673544724 Jul 6 15:12 linuxamd64_12102_database_1of2.zip
[root@ser6-51 download]# unzip linuxamd64_12102_database_1of2.zip
[root@ser6-51 download]# unzip linuxamd64_12102_database_2of2.zip
[root@ser6-51 download]# ls -ltr
drwxr-xr-x 7 root root 4096 Jul 7 2014 database
-rw-r--r-- 1 root root 1014530602 Jul 6 15:07 linuxamd64_12102_database_2of2.zip
-rw-r--r-- 1 root root 1673544724 Jul 6 15:12 linuxamd64_12102_database_1of2.zip
3.2 安裝oracle軟件
3.2.1 新建靜默安裝的應答文件
su - oracle
vi 12102db_install.rsp
添加：
###################################################################### ## Copyright(c) Oracle Corporation 1998,2013. All rights reserved. ## ## ## ## Specify values for the variables listed below to customize ## ## your installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## can help to populate the variables with the appropriate ## ## values. ## ## ## ## IMPORTANT NOTE: This file contains plain text passwords and ## ## should be secured to have read permission only by oracle user ## ## or db administrator who owns this installation. ## ## ## ###################################################################### #------------------------------------------------------------------------------- # Do not change the following system generated value. #------------------------------------------------------------------------------- oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0 #------------------------------------------------------------------------------- # Specify the installation option. # It can be one of the following: # - INSTALL_DB_SWONLY # - INSTALL_DB_AND_CONFIG # - UPGRADE_DB #------------------------------------------------------------------------------ oracle.install.option=INSTALL_DB_SWONLY #------------------------------------------------------------------------------- # Specify the hostname of the system as set during the install. It can be used # to force the installation to use an alternative hostname rather than using the # first hostname found on the system. (e.g., for systems with multiple hostnames # and network interfaces) #------------------------------------------------------------------------------- ORACLE_HOSTNAME=ser6-51 #------------------------------------------------------------------------------- # Specify the Unix group to be set for the inventory directory. #------------------------------------------------------------------------------- UNIX_GROUP_NAME=oinstall #------------------------------------------------------------------------------- # Specify the location which holds the inventory files. # This is an optional parameter if installing on # Windows based Operating System. #------------------------------------------------------------------------------- INVENTORY_LOCATION=/u01/app/oraInventory #------------------------------------------------------------------------------- # Specify the languages in which the components will be installed. # # en : English ja : Japanese # fr : French ko : Korean # ar : Arabic es : Latin American Spanish # bn : Bengali lv : Latvian # pt_BR: Brazilian Portuguese lt : Lithuanian # bg : Bulgarian ms : Malay # fr_CA: Canadian French es_MX: Mexican Spanish # ca : Catalan no : Norwegian # hr : Croatian pl : Polish # cs : Czech pt : Portuguese # da : Danish ro : Romanian # nl : Dutch ru : Russian # ar_EG: Egyptian zh_CN: Simplified Chinese # en_GB: English (Great Britain) sk : Slovak # et : Estonian sl : Slovenian # fi : Finnish es_ES: Spanish # de : German sv : Swedish # el : Greek th : Thai # iw : Hebrew zh_TW: Traditional Chinese # hu : Hungarian tr : Turkish # is : Icelandic uk : Ukrainian # in : Indonesian vi : Vietnamese # it : Italian # # all_langs : All languages # # Specify value as the following to select any of the languages. # Example : SELECTED_LANGUAGES=en,fr,ja # # Specify value as the following to select all the languages. # Example : SELECTED_LANGUAGES=all_langs #------------------------------------------------------------------------------- SELECTED_LANGUAGES=en #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Home. #------------------------------------------------------------------------------- ORACLE_HOME=/u01/app/oracle/product/12c/db_1 #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Base. #------------------------------------------------------------------------------- ORACLE_BASE=/u01/app/oracle #------------------------------------------------------------------------------- # Specify the installation edition of the component. # # The value should contain only one of these choices. # - EE : Enterprise Edition # - SE : Standard Edition # - SEONE : Standard Edition One # - PE : Personal Edition (WINDOWS ONLY) #------------------------------------------------------------------------------- oracle.install.db.InstallEdition=EE ################################################################################# # # # PRIVILEGED OPERATING SYSTEM GROUPS # # ------------------------------------------ # # Provide values for the OS groups to which OSDBA and OSOPER privileges # # needs to be granted. If the install is being performed as a member of the # # group "dba", then that will be used unless specified otherwise below. # # # # The value to be specified for OSDBA and OSOPER group is only for UNIX based # # Operating System. # # # ############################################################################### #------------------------------------------------------------------------------ # The DBA_GROUP is the OS group which is to be granted OSDBA privileges. #------------------------------------------------------------------------------- oracle.install.db.DBA_GROUP=dba #------------------------------------------------------------------------------ # The OPER_GROUP is the OS group which is to be granted OSOPER privileges. # The value to be specified for OSOPER group is optional. #------------------------------------------------------------------------------ oracle.install.db.OPER_GROUP=oper #------------------------------------------------------------------------------ # The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges. #------------------------------------------------------------------------------ oracle.install.db.BACKUPDBA_GROUP=dba #------------------------------------------------------------------------------ # The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges. #------------------------------------------------------------------------------ oracle.install.db.DGDBA_GROUP=dba #------------------------------------------------------------------------------ # The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges. #------------------------------------------------------------------------------ oracle.install.db.KMDBA_GROUP=dba ################################################################################ # # # Database Configuration Options # # # ################################################################################ #------------------------------------------------------------------------------- # Specify the type of database to create. # It can be one of the following: # - GENERAL_PURPOSE/TRANSACTION_PROCESSING # - DATA_WAREHOUSE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.type= #------------------------------------------------------------------------------- # Specify the Starter Database Global Database Name. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.globalDBName= #------------------------------------------------------------------------------- # Specify the Starter Database SID. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.SID= #------------------------------------------------------------------------------- # Specify whether the database should be configured as a Container database. #------------------------------------------------------------------------------- oracle.install.db.ConfigureAsContainerDB= #------------------------------------------------------------------------------- # Specify the Pluggable Database name for the pluggable database in Container Database. #------------------------------------------------------------------------------- oracle.install.db.config.PDBName= #------------------------------------------------------------------------------- # Specify the Starter Database character set. # # One of the following # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2, # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257, # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6, # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8, # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE, # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950, # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.characterSet= #------------------------------------------------------------------------------ # This variable should be set to true if Automatic Memory Management # in Database is desired. # If Automatic Memory Management is not desired, and memory allocation # is to be done manually, then set it to false. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryOption= #------------------------------------------------------------------------------- # Specify the total memory allocation for the database. Value(in MB) should be # at least 256 MB, and should not exceed the total physical memory available # on the system. # Example: oracle.install.db.config.starterdb.memoryLimit=512 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.memoryLimit= ################################################################################# # # # Passwords can be supplied for the following four schemas in the # # starter database: # # SYS # # SYSTEM # # DBSNMP (used by Enterprise Manager) # # # # Same password can be used for all accounts (not recommended) # # or different passwords for each account can be provided (recommended) # # # ################################################################################# #------------------------------------------------------------------------------ # This variable holds the password that is to be used for all schemas in the # starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.ALL=oracle #------------------------------------------------------------------------------- # Specify the SYS password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYS= #------------------------------------------------------------------------------- # Specify the SYSTEM password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSTEM= #------------------------------------------------------------------------------- # Specify the DBSNMP password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.DBSNMP= #------------------------------------------------------------------------------- # Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.PDBADMIN= #------------------------------------------------------------------------------ # Specify whether user doesn't want to configure Security Updates. # The value for this variable should be true if you don't want to configure # Security Updates, false otherwise. # # The value can be either true or false. If left blank it will be assumed # to be false. # # Example : DECLINE_SECURITY_UPDATES=false #------------------------------------------------------------------------------ DECLINE_SECURITY_UPDATES=true #------------------------------------------------------------------------------ # Specify the auto-updates option. It can be one of the following: # - MYORACLESUPPORT_DOWNLOAD # - OFFLINE_UPDATES # - SKIP_UPDATES #------------------------------------------------------------------------------ oracle.installer.autoupdates.option=SKIP_UPDATES
3.2.2 靜默安裝軟件
[root@ser6-51 install]# su - oracle
[oracle@ser6-51 ~]$ cd /download/database/
[oracle@ser6-51 database]$ ./runInstaller -silent -responseFile /home/oracle/12102db_install.rsp
/*
假如安裝過程中報錯了，已經在$ORACLE_HOME和/u01/app/oraInventory下生成了很多文件目錄。想再次安裝的話，需要先刪除這些文件：
[oracle@ser6-52 app]$ pwd
/u01/app
[oracle@ser6-52 app]$ rm -rf /u01/app/oraInventory
cd $ORACLE_HOME/
rm -rf *
*/
執行兩個腳本：
[root@ser6-51 ~]# sh /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
root@ser6-51 ~]# sh /u01/app/oracle/product/12c/db_1/root.sh
Check /u01/app/oracle/product/12c/db_1/install/root_ser6-51_2015-07-06_19-00-11.log for the output of root script
3.3 建庫
3.3.1 建響應文件
v i /home/oracle/dbca.rsp
添加：
[GENERAL] RESPONSEFILE_VERSION = "12.1.2.0" OPERATION_TYPE = "createDatabase" [CREATEDATABASE] GDBNAME = "orcl" SID = "orcl" TEMPLATENAME = "New_Database.dbt" SYSPASSWORD = "orcl" SYSTEMPASSWORD = "orcl" SYSMANPASSWORD = "orcl" DBSNMPPASSWORD = "orcl" DATAFILEDESTINATION ="/u01/app/oracle/oradata" STORAGETYPE=FS CHARACTERSET = "ZHS16GBK" DATABASETYPE = "MULTIPURPOSE" AUTOMATICMEMORYMANAGEMENT = "FALSE"
3.3.2 執行命令
dbca -silent -responseFile /home/oracle/dbca.rsp
Creating and starting Oracle instance 1% complete 4% complete Creating database files 5% complete 9% complete Creating data dictionary views 10% complete 13% complete 14% complete 15% complete 16% complete 17% complete 18% complete 21% complete 22% complete 23% complete 24% complete Adding Oracle JVM 30% complete 37% complete 44% complete 46% complete Adding Oracle Text 47% complete 48% complete 50% complete 51% complete Adding Oracle Multimedia 52% complete 65% complete Adding Oracle OLAP 66% complete 67% complete 68% complete 69% complete Adding Oracle Spatial 70% complete 78% complete Adding Oracle Application Express 83% complete 87% complete Completing Database Creation 89% complete 90% complete 91% complete 95% complete 100% complete
[oracle@ser6-51 dbs]$ export ORACLE_SID=orcl
[oracle@ser6-51 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 12.1.0.2.0 Production on Wed Jul 8 09:29:16 2015
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Connected to:
Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production
With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
SQL> select status from v$instance;
STATUS
------------
OPEN
3.4配監聽
3.4.1 建響應文件
vi 12102_netca.rsp
添加：
[GENERAL]
RESPONSEFILE_VERSION="12.1"
CREATE_TYPE="CUSTOM"
#-------------------------------------------------------------------------------
# Name : SHOW_GUI
# Datatype : Boolean
# Description: This variable controls appearance/suppression of the NetCA GUI,
# Pre-req : N/A
# Default : TRUE
# Note:
# This must be set to false in order to run NetCA in silent mode.
# This is a substitute of "/silent" flag in the NetCA command line.
# The command line flag has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#SHOW_GUI=false
#-------------------------------------------------------------------------------
# Name : LOG_FILE
# Datatype : String
# Description: If present, NetCA will log output to this file in addition to the
# standard out.
# Pre-req : N/A
# Default : NONE
# Note:
# This is a substitute of "/log" in the NetCA command line.
# The command line argument has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#LOG_FILE=""/oracle12cHome/network/tools/log/netca.log""
[oracle.net.ca]
#INSTALLED_COMPONENTS;StringList;list of installed components
# The possible values for installed components are:
# "net8","server","client","aso", "cman", "javavm"
INSTALLED_COMPONENTS={"server","net8","javavm"}
#INSTALL_TYPE;String;type of install
# The possible values for install type are:
# "typical","minimal" or "custom"
INSTALL_TYPE=""typical""
#LISTENER_NUMBER;Number;Number of Listeners
# A typical install sets one listener
LISTENER_NUMBER=1
#LISTENER_NAMES;StringList;list of listener names
# The values for listener are:
# "LISTENER","LISTENER1","LISTENER2","LISTENER3", ...
# A typical install sets only "LISTENER"
LISTENER_NAMES="LISTENER"
#LISTENER_PROTOCOLS;StringList;list of listener addresses (protocols and parameters separated by semicolons)
# The possible values for listener protocols are:
# "TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521"
# A typical install sets only "TCP;1521"
LISTENER_PROTOCOLS="TCP;1521"
#LISTENER_START;String;name of the listener to start, in double quotes
LISTENER_START=""LISTENER""
#NAMING_METHODS;StringList;list of naming methods
# The possible values for naming methods are:
# LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL, NIS, DCE
# A typical install sets only: "TNSNAMES","ONAMES","HOSTNAMES"
# or "LDAP","TNSNAMES","ONAMES","HOSTNAMES" for LDAP
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
#NOVELL_NAMECONTEXT;String;Novell Directory Service name context, in double quotes
# A typical install does not use this variable.
#NOVELL_NAMECONTEXT = ""NAMCONTEXT""
#SUN_METAMAP;String; SUN meta map, in double quotes
# A typical install does not use this variable.
#SUN_METAMAP = ""MAP""
#DCE_CELLNAME;String;DCE cell name, in double quotes
# A typical install does not use this variable.
#DCE_CELLNAME = ""CELL""
#NSN_NUMBER;Number;Number of NetService Names
# A typical install sets one net service name
NSN_NUMBER=1
#NSN_NAMES;StringList;list of Net Service names
# A typical install sets net service name to "EXTPROC_CONNECTION_DATA"
NSN_NAMES="EXTPROC_CONNECTION_DATA"
#NSN_SERVICE;StringList;Oracle12c database's service name
# A typical install sets Oracle12c database's service name to "PLSExtProc"
NSN_SERVICE="PLSExtProc"
3.4.2 執行命令
[oracle@ser6-51 ~]$ netca -silent -responseFile /home/oracle/12102_netca.rsp
Parsing command line arguments:
Parameter "silent" = true
Parameter "responsefile" = /home/oracle/12102_netca.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Oracle Net Listener Startup:
Running Listener Control:
/u01/app/oracle/product/12c/db_1/bin/lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
4：設置開機啟動
4.1 修改dbstart文件
假如執行/u01/app/oracle/product/12c/db_1/bin/dbstart報錯：
ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener
Usage: /u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart ORACLE_HOME
修改dbstart文件，將ORACLE_HOME_LISTNER=$1
修改為ORACLE_HOME_LISTNER=$ORACLE_HOME
4.2修改/etc/oratab
添加：
orcl:/u01/app/oracle/product/12c/db_1:Y
4.3修改/etc/rc.d/rc.local
添加一行：
su oracle -lc /u01/app/oracle/product/12c/db_1/bin/dbstart
--說明：/u01/app/oracle/product/12c/dbhome_1為oracle的安裝目錄，要根據實際情況進行修改。
reboot試驗下看是否能開機自動啟動。
5：開1521端口
如果防火墻開啟了的話，要開1521端口，允許遠程訪問。
vi /etc/sysconfig/iptables
直接在配置文件里已有的-A INPUT那些命令下面
添加一行：
-A INPUT -m state --state NEW -m tcp -p tcp --dport 1521-j ACCEPT
重啟防火墻
[root@ser6-52 mongodb]# /etc/init.d/iptables restart
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
iptables: Applying firewall rules: [ OK ]
6：后續配置
#把操作系統版本改回原來的配置
[root@pc ~]# vi /etc/redhat-release
Red Hat Enterprise Linux Server release 5.8 (Tikanga)
修改后：
#redhat-4
CentOS release 6.5 (Final)
對應步驟2.8。
--靜默方式建庫參考這篇文章。
您可能感興趣的文章:
- centos7下安裝oracle11gR2的詳細步驟
- centos 6.5下安裝oracle 11gR2與Oracle自動啟動的配置
- Linux下安裝Oracle（CentOS-Oracle 12c）的方法
- CentOS系統上安裝配置Oracle數據庫的詳細教程
- CentOS下PHP安裝Oracle擴展
- CentOS6.2上安裝Oracle10g報ins_emdb.mk錯誤處理方法
- CentOS 6.3下安裝部署Oracle服務器圖文教程
- Linux+php+apache+oracle環境搭建之CentOS下安裝Oracle數據庫
- Linux+php+apache+oracle環境搭建之CentOS下源碼編譯安裝PHP
- centos下Oracle11G圖文安裝教程
相關文章
我們可以通過視圖v$session_wait來查看系統當前的等待事件，以及與等待事件相對應的資源的相關信息2009-03-03
最近需要用的oracle，所以大家好好的學習下基礎并整理下資料，希望能幫助到需要的朋友。2011-12-12
這篇文章主要介紹了詳解Oracle自定義異常示例的相關資料,需要的朋友可以參考下2016-04-04
DBA 在Linux下安裝Oracle Database11g數據庫圖文教程
正在學習Oracle DBA的知識，所以安裝oracle 11個的數據庫用以做測試，如Clone， RMAN, Stream等2014-08-08
Oracle數據庫中，使用“||”進行字符串連接，下面就讓我們一起了解一下Oracle數據庫中字符串連接的方法，希望對您能有所幫助2013-05-05
Windows Server 2012 安裝oracle11g(圖文教程)
這篇文章主要介紹了Windows Server 2012 安裝oracle11g(圖文教程)，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2019-12-12
正在看的ORACLE教程是:OracleEXP和IMP用法和介紹2007-03-03
Oracle 11g數據庫使用expdp每周進行數據備份并上傳到備份服務器
這篇文章主要介紹了Oracle 11g數據庫使用expdp每周進行數據備份并上傳到備份服務器,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-06-06
深入探討:Oracle中如何查詢正鎖表的用戶以及釋放被鎖的表的方法
本篇文章是對Oracle中查詢正鎖表的用戶以及釋放被鎖的表的方法進行了詳細的分析介紹，需要的朋友參考下2013-05-05
oracle如何覆蓋導入dmp文件呢？很多朋友對這一問題不是很清楚，今天小編通過分享oracle覆蓋導入dmp文件的2種方法，感興趣的朋友跟隨小編一起看看吧2021-05-05