如何使用C#讀寫鎖ReaderWriterLockSlim

更新時間：2022年04月27日 14:26:12 作者：cnn237111

這篇文章向大家介紹了讀寫鎖ReaderWriterLockSlim，其優點就是多個線程可以同時讀取該對象，要了解更多讀寫鎖的知識，仔細閱讀下文吧

讀寫鎖的概念很簡單，允許多個線程同時獲取讀鎖，但同一時間只允許一個線程獲得寫鎖，因此也稱作共享-獨占鎖。在C#中，推薦使用ReaderWriterLockSlim類來完成讀寫鎖的功能。
某些場合下，對一個對象的讀取次數遠遠大于修改次數，如果只是簡單的用lock方式加鎖，則會影響讀取的效率。而如果采用讀寫鎖，則多個線程可以同時讀取該對象，只有等到對象被寫入鎖占用的時候，才會阻塞。

簡單的說，當某個線程進入讀取模式時，此時其他線程依然能進入讀取模式，假設此時一個線程要進入寫入模式，那么他不得不被阻塞。直到讀取模式退出為止。

同樣的，如果某個線程進入了寫入模式，那么其他線程無論是要寫入還是讀取，都是會被阻塞的。

進入寫入/讀取模式有2種方法：

EnterReadLock嘗試進入寫入模式鎖定狀態。
TryEnterReadLock(Int32) 嘗試進入讀取模式鎖定狀態，可以選擇整數超時時間。
EnterWriteLock 嘗試進入寫入模式鎖定狀態。
TryEnterWriteLock(Int32) 嘗試進入寫入模式鎖定狀態，可以選擇超時時間。

退出寫入/讀取模式有2種方法：

ExitReadLock 減少讀取模式的遞歸計數，并在生成的計數為 0（零）時退出讀取模式。
ExitWriteLock 減少寫入模式的遞歸計數，并在生成的計數為 0（零）時退出寫入模式。
下面演示一下用法：

public class Program
  {
    static private ReaderWriterLockSlim rwl = new ReaderWriterLockSlim();
    static void Main(string[] args)
    {
      Thread t_read1 = new Thread(new ThreadStart(ReadSomething));
      t_read1.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start ReadSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_read1.GetHashCode());
      Thread t_read2 = new Thread(new ThreadStart(ReadSomething));
      t_read2.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start ReadSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_read2.GetHashCode());
      Thread t_write1 = new Thread(new ThreadStart(WriteSomething));
      t_write1.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start WriteSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_write1.GetHashCode());
    }
    static public void ReadSomething()
    {
      Console.WriteLine("{0} Thread ID {1} Begin EnterReadLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      rwl.EnterReadLock();
      try
      {
        Console.WriteLine("{0} Thread ID {1} reading sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(5000);//模擬讀取信息
        Console.WriteLine("{0} Thread ID {1} reading end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
      finally
      {
        rwl.ExitReadLock();
        Console.WriteLine("{0} Thread ID {1} ExitReadLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
    }
    static public void WriteSomething()
    {
      Console.WriteLine("{0} Thread ID {1} Begin EnterWriteLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      rwl.EnterWriteLock();
      try
      {
        Console.WriteLine("{0} Thread ID {1} writing sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(10000);//模擬寫入信息
        Console.WriteLine("{0} Thread ID {1} writing end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
      finally
      {
        rwl.ExitWriteLock();
        Console.WriteLine("{0} Thread ID {1} ExitWriteLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
    }
  }

可以看到3號線程和4號線程能夠同時進入讀模式，而5號線程過了5秒鐘后（即3,4號線程退出讀鎖后），才能進入寫模式。
把上述代碼修改一下，先開啟2個寫模式的線程，然后在開啟讀模式線程，代碼如下：

static void Main(string[] args)
    {
      Thread t_write1 = new Thread(new ThreadStart(WriteSomething));
      t_write1.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start WriteSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_write1.GetHashCode());
      Thread t_write2 = new Thread(new ThreadStart(WriteSomething));
      t_write2.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start WriteSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_write2.GetHashCode());
      Thread t_read1 = new Thread(new ThreadStart(ReadSomething));
      t_read1.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start ReadSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_read1.GetHashCode());
      Thread t_read2 = new Thread(new ThreadStart(ReadSomething));
      t_read2.Start();
      Console.WriteLine("{0} Create Thread ID {1} , Start ReadSomething", DateTime.Now.ToString("hh:mm:ss fff"), t_read2.GetHashCode());
    }

結果如下：

可以看到，3號線程和4號線程都要進入寫模式，但是3號線程先占用寫入鎖，因此4號線程不得不等了10s后才進入。5號線程和6號線程需要占用讀取鎖，因此等4號線程退出寫入鎖后才能繼續下去。
TryEnterReadLock和TryEnterWriteLock可以設置一個超時時間，運行到這句話的時候，線程會阻塞在此，如果此時能占用鎖，那么返回true，如果到超時時間還未占用鎖，那么返回false，放棄鎖的占用，直接繼續執行下面的代碼。

EnterUpgradeableReadLock

ReaderWriterLockSlim類提供了可升級讀模式，這種方式和讀模式的區別在于它還有通過調用 EnterWriteLock 或 TryEnterWriteLock 方法升級為寫入模式。因為每次只能有一個線程處于可升級模式。進入可升級模式的線程，不會影響讀取模式的線程，即當一個線程進入可升級模式，任意數量線程可以同時進入讀取模式，不會阻塞。如果有多個線程已經在等待獲取寫入鎖，那么運行EnterUpgradeableReadLock將會阻塞，直到那些線程超時或者退出寫入鎖。
下面代碼演示了如何在可升級讀模式下，升級到寫入鎖。

static public void UpgradeableRead()
    {
      Console.WriteLine("{0} Thread ID {1} Begin EnterUpgradeableReadLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      rwl.EnterUpgradeableReadLock();
      try
      {
        Console.WriteLine("{0} Thread ID {1} doing sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Console.WriteLine("{0} Thread ID {1} Begin EnterWriteLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        rwl.EnterWriteLock();
        try
        {
          Console.WriteLine("{0} Thread ID {1} writing sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
          Thread.Sleep(10000);//模擬寫入信息
          Console.WriteLine("{0} Thread ID {1} writing end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        }
        finally
        {
          rwl.ExitWriteLock();
          Console.WriteLine("{0} Thread ID {1} ExitWriteLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        }
        Thread.Sleep(10000);//模擬讀取信息
        Console.WriteLine("{0} Thread ID {1} doing end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
      finally
      {
        rwl.ExitUpgradeableReadLock();
        Console.WriteLine("{0} Thread ID {1} ExitUpgradeableReadLock...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
    }

讀寫鎖對于性能的影響是明顯的。
下面測試代碼：

public class Program
  {
    static private ReaderWriterLockSlim rwl = new ReaderWriterLockSlim();
    static void Main(string[] args)
    {
      Stopwatch sw = new Stopwatch();
      sw.Start();
      List<Task> lstTask = new List<Task>();
      for (int i = 0; i < 500; i++)
      {
        if (i % 25 != 0)
        {
          var t = Task.Factory.StartNew(ReadSomething);
          lstTask.Add(t);
        }
        else
        {
          var t = Task.Factory.StartNew(WriteSomething);
          lstTask.Add(t);
        }
      }
      Task.WaitAll(lstTask.ToArray());
      sw.Stop();
      Console.WriteLine("使用ReaderWriterLockSlim方式，耗時：" + sw.Elapsed);
      sw.Restart();
      lstTask = new List<Task>();
      for (int i = 0; i < 500; i++)
      {
        if (i % 25 != 0)
        {
          var t = Task.Factory.StartNew(ReadSomething_lock);
          lstTask.Add(t);
        }
        else
        {
          var t = Task.Factory.StartNew(WriteSomething_lock);
          lstTask.Add(t);
        }
      }
      Task.WaitAll(lstTask.ToArray());
      sw.Stop();
      Console.WriteLine("使用lock方式，耗時：" + sw.Elapsed);
    }
    static private object _lock1 = new object();
    static public void ReadSomething_lock()
    {
      lock (_lock1)
      {
        //Console.WriteLine("{0} Thread ID {1} reading sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(10);//模擬讀取信息
        //Console.WriteLine("{0} Thread ID {1} reading end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
    }
    static public void WriteSomething_lock()
    {
      lock (_lock1)
      {
        //Console.WriteLine("{0} Thread ID {1} writing sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(100);//模擬寫入信息
        //Console.WriteLine("{0} Thread ID {1} writing end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
    }
    static public void ReadSomething()
    {
      rwl.EnterReadLock();
      try
      {
        //Console.WriteLine("{0} Thread ID {1} reading sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(10);//模擬讀取信息
        //Console.WriteLine("{0} Thread ID {1} reading end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
      finally
      {
        rwl.ExitReadLock();
      }
    }
    static public void WriteSomething()
    {
      rwl.EnterWriteLock();
      try
      {
        //Console.WriteLine("{0} Thread ID {1} writing sth...", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
        Thread.Sleep(100);//模擬寫入信息
        //Console.WriteLine("{0} Thread ID {1} writing end.", DateTime.Now.ToString("hh:mm:ss fff"), Thread.CurrentThread.GetHashCode());
      }
      finally
      {
        rwl.ExitWriteLock();
      }
    }
  }

上述代碼，就500個Task，每個Task占用一個線程池線程，其中20個寫入線程和480個讀取線程，模擬操作。其中讀取數據花10ms，寫入操作花100ms，分別測試了對于lock方式和ReaderWriterLockSlim方式?？梢宰鲆粋€估算，對于ReaderWriterLockSlim，假設480個線程同時讀取，那么消耗10ms，20個寫入操作占用2000ms，因此所消耗時間2010ms，而對于普通的lock方式，由于都是獨占性的，因此480個讀取操作占時間4800ms+20個寫入操作2000ms=6800ms。運行結果顯示了性能提升明顯。