python使用marshal模塊序列化實例
本文實例講述了python使用marshal模塊序列化的方法,分享給大家供大家參考。具體方法如下:
先來看看下面這段代碼:
import marshal
data1 = ['abc',12,23,'jb51'] #幾個測試數據
data2 = {1:'aaa',"b":'dad'}
data3 = (1,2,4)
output_file = open("a.txt",'wb')#把這些數據序列化到文件中,注:文件必須以二進制模式打開
marshal.dump(data1,output_file)
marshal.dump(data2,output_file)
marshal.dump(data3,output_file)
output_file.close()
input_file = open('a.txt','rb')#從文件中讀取序列化的數據
#data1 = []
data1 = marshal.load(input_file)
data2 = marshal.load(input_file)
data3 = marshal.load(input_file)
print data1#給同志們打印出結果看看
print data2
print data3
outstring = marshal.dumps(data1)#marshal.dumps()返回是一個字節串,該字節串用于寫入文件
open('out.txt','wb').write(outstring)
file_data = open('out.txt','rb').read()
real_data = marshal.loads(file_data)
print real_data
結果:
['abc', 12, 23, 'jb51']
{1: 'aaa', 'b': 'dad'}
(1, 2, 4)
['abc', 12, 23, 'jb51']
marshel模塊的幾個函數官方描述如下:
The module defines these functions:
marshal.dump(value, file[, version])
Write the value on the open file. The value must be a supported type. The file must be an open file object such as sys.stdout or returned by open() or os.popen(). It must be opened in binary mode ('wb' or 'w+b').
If the value has (or contains an object that has) an unsupported type, a ValueError exception is raised — but garbage data will also be written to the file. The object will not be properly read back by load().
New in version 2.4: The version argument indicates the data format that dump should use (see below).
marshal.load(file)
Read one value from the open file and return it. If no valid value is read (e.g. because the data has a different Python version's incompatible marshal format), raise EOFError, ValueError or TypeError. The file must be an open file object opened in binary mode ('rb' or 'r+b').
Warning
If an object containing an unsupported type was marshalled with dump(), load() will substitute None for the unmarshallable type.
marshal.dumps(value[, version])
Return the string that would be written to a file by dump(value, file). The value must be a supported type. Raise a ValueError exception if value has (or contains an object that has) an unsupported type.
New in version 2.4: The version argument indicates the data format that dumps should use (see below).
marshal.loads(string)
Convert the string to a value. If no valid value is found, raise EOFError, ValueError or TypeError. Extra characters in the string are ignored.
In addition, the following constants are defined:
marshal.version
Indicates the format that the module uses.
marshal.version的用處:marshal不保證不同的python版本之間的兼容性,所以保留個版本信息的函數.
希望本文所述對大家Python程序設計的學習有所幫助。
相關文章
pycharm遠程連接服務器并配置python interpreter的方法
這篇文章主要介紹了pycharm遠程連接服務器并配置python interpreter的方法,本文通過圖文并茂的形式給大家介紹的非常詳細,對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2020-12-12
python 判斷一組數據是否符合正態分布
這篇文章主要介紹了python 如何判斷一組數據是否符合正態分布,幫助大家更好的利用python分析數據,感興趣的朋友可以了解下2020-09-09
python轉化excel數字日期為標準日期操作
這篇文章主要介紹了python轉化excel數字日期為標準日期操作,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2020-07-07
python通過安裝itchat包實現微信自動回復收到的春節祝福
這篇文章主要介紹了python通過安裝itchat包實現微信自動回復收到的春節祝福,本文通過實例代碼給大家介紹的非常詳細,具有一定的參考借鑒價值,需要的朋友參考下吧2020-01-01
matplotlib繪制兩點間連線的幾種方法實現
本文主要介紹了matplotlib繪制兩點間連線的幾種方法實現,主要介紹了4種方法,文中通過示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2022-03-03

