探討SQL利用INFORMATION_SCHEMA系統視圖如何獲取表的主外鍵信息
更新時間：2013年06月21日 11:15:02 作者：
本篇文章是對SQL利用INFORMATION_SCHEMA系統視圖如何獲取表的主外鍵信息進行了詳細的分析介紹，需要的朋友參考下
接著上篇文章《解析SQL 表結構信息查詢 含主外鍵、自增長》里面提到了INFORMATION_SCHEMA視圖，其實到了SQL 2005微軟都主推大家使用INFORMATION_SCHEMA系統視圖，而不是在使用sys東東了，當然目前還是有許多信息只能通過sys視圖來查詢。這里我們還是以查詢表結果信息為例來說明一些主要的INFORMATION_SCHEMA視圖的使用。
首先我們需要查詢列的信息，這需要用到[INFORMATION_SCHEMA].[COLUMNS]系統視圖來查詢數據列的信息，SQL 如下：
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
c.DATA_TYPE ,
c.CHARACTER_MAXIMUM_LENGTH ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.NUMERIC_PRECISION ,
c.NUMERIC_SCALE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
WHERE TABLE_NAME = 'Address'
運行結果如下：
我們都知道我們在定義列的時候一般的使用都是varchar(50)之類的信息，這里我們需要整合DATA_TYPE和CHARACTER_MAXIMUM_LENGTH信息，當CHARACTER_MAXIMUM_LENGTH為-1時即使說沒有指定具體最大長度，數據的指定長度信息是max，而numeric需要整合NUMERIC_PRECISION、NUMERIC_SCALE信息。修改后的SQL如下：
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT
FROM [INFORMATION_SCHEMA].[COLUMNS] c
WHERE TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
現在我們需要標記這張表的那些列是主鍵，那些列是外鍵，要查詢表的主、外鍵信息需要用到[INFORMATION_SCHEMA].[TABLE_CONSTRAINTS]和[INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] 系統視圖
運行結果如圖：
修改我們先前的SQL語句：
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN 'YES'
ELSE 'NO'
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN 'YES'
ELSE 'NO'
END AS IS_FOREIGN_KEY
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
現在我們已經知道那些列是主鍵那些是外鍵，接下來的就是外鍵列所關聯的外檢表信息，這里需要用到[INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS]系統視圖，運行該視圖如下：
所以修改我們的SQL如下：
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN 'YES'
ELSE 'NO'
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN 'YES'
ELSE 'NO'
END AS IS_FOREIGN_KEY,
fkcu.COLUMN_NAME AS FOREIGN_KEY,
fkcu.TABLE_NAME AS FOREIGN_TABLE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS] fc ON kcu.CONSTRAINT_SCHEMA = fc.CONSTRAINT_SCHEMA
AND kcu.CONSTRAINT_NAME = fc.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] fkcu ON fkcu.CONSTRAINT_SCHEMA = fc.UNIQUE_CONSTRAINT_SCHEMA
AND fkcu.CONSTRAINT_NAME = fc.UNIQUE_CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
我們的查詢結果中顯示了太多的NULL，看著不怎么舒服，還有我們的表名應該顯示一次就可以，修改SQL如下：
SELECT CASE WHEN c.ORDINAL_POSITION = 1
THEN c.TABLE_SCHEMA + '.' + c.TABLE_NAME
ELSE ''
END AS TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
ISNULL(c.COLUMN_DEFAULT, '') AS COLUMN_DEFAULT ,
CASE WHEN c.IS_NULLABLE = 'YES' THEN '√'
ELSE ''
END IS_NULLABLE ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN '√'
ELSE ''
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN '√'
ELSE ''
END AS IS_FOREIGN_KEY ,
ISNULL(fkcu.COLUMN_NAME, '') AS FOREIGN_KEY ,
ISNULL(fkcu.TABLE_NAME, '') AS FOREIGN_TABLE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS] fc ON kcu.CONSTRAINT_SCHEMA = fc.CONSTRAINT_SCHEMA
AND kcu.CONSTRAINT_NAME = fc.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] fkcu ON fkcu.CONSTRAINT_SCHEMA = fc.UNIQUE_CONSTRAINT_SCHEMA
AND fkcu.CONSTRAINT_NAME = fc.UNIQUE_CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
有不對的地方還請大家拍磚！
首先我們需要查詢列的信息，這需要用到[INFORMATION_SCHEMA].[COLUMNS]系統視圖來查詢數據列的信息，SQL 如下：
復制代碼 代碼如下:
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
c.DATA_TYPE ,
c.CHARACTER_MAXIMUM_LENGTH ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.NUMERIC_PRECISION ,
c.NUMERIC_SCALE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
WHERE TABLE_NAME = 'Address'
運行結果如下：
我們都知道我們在定義列的時候一般的使用都是varchar(50)之類的信息，這里我們需要整合DATA_TYPE和CHARACTER_MAXIMUM_LENGTH信息，當CHARACTER_MAXIMUM_LENGTH為-1時即使說沒有指定具體最大長度，數據的指定長度信息是max，而numeric需要整合NUMERIC_PRECISION、NUMERIC_SCALE信息。修改后的SQL如下：
復制代碼 代碼如下:
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT
FROM [INFORMATION_SCHEMA].[COLUMNS] c
WHERE TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
現在我們需要標記這張表的那些列是主鍵，那些列是外鍵，要查詢表的主、外鍵信息需要用到[INFORMATION_SCHEMA].[TABLE_CONSTRAINTS]和[INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] 系統視圖
運行結果如圖：
修改我們先前的SQL語句：
復制代碼 代碼如下:
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN 'YES'
ELSE 'NO'
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN 'YES'
ELSE 'NO'
END AS IS_FOREIGN_KEY
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
現在我們已經知道那些列是主鍵那些是外鍵，接下來的就是外鍵列所關聯的外檢表信息，這里需要用到[INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS]系統視圖，運行該視圖如下：
所以修改我們的SQL如下：
復制代碼 代碼如下:
SELECT c.TABLE_SCHEMA ,
c.TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
c.COLUMN_DEFAULT ,
c.IS_NULLABLE ,
c.COLUMN_DEFAULT ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN 'YES'
ELSE 'NO'
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN 'YES'
ELSE 'NO'
END AS IS_FOREIGN_KEY,
fkcu.COLUMN_NAME AS FOREIGN_KEY,
fkcu.TABLE_NAME AS FOREIGN_TABLE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS] fc ON kcu.CONSTRAINT_SCHEMA = fc.CONSTRAINT_SCHEMA
AND kcu.CONSTRAINT_NAME = fc.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] fkcu ON fkcu.CONSTRAINT_SCHEMA = fc.UNIQUE_CONSTRAINT_SCHEMA
AND fkcu.CONSTRAINT_NAME = fc.UNIQUE_CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
我們的查詢結果中顯示了太多的NULL，看著不怎么舒服，還有我們的表名應該顯示一次就可以，修改SQL如下：
復制代碼 代碼如下:
SELECT CASE WHEN c.ORDINAL_POSITION = 1
THEN c.TABLE_SCHEMA + '.' + c.TABLE_NAME
ELSE ''
END AS TABLE_NAME ,
c.COLUMN_NAME ,
CASE WHEN ( ( CHARINDEX('char', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH <> -1
)
THEN c.DATA_TYPE + '('
+ CAST(c.CHARACTER_MAXIMUM_LENGTH AS VARCHAR(4)) + ')'
WHEN ( ( CHARINDEX('CHAR', c.DATA_TYPE) > 0
OR CHARINDEX('binary', c.DATA_TYPE) > 0
)
AND c.CHARACTER_MAXIMUM_LENGTH = -1
) THEN c.DATA_TYPE + '(max)'
WHEN ( CHARINDEX('numeric', c.DATA_TYPE) > 0 )
THEN c.DATA_TYPE + '(' + CAST(c.NUMERIC_PRECISION AS VARCHAR(4))
+ ',' + CAST(c.NUMERIC_SCALE AS VARCHAR(4)) + ')'
ELSE c.DATA_TYPE
END AS DATA_TYPE ,
ISNULL(c.COLUMN_DEFAULT, '') AS COLUMN_DEFAULT ,
CASE WHEN c.IS_NULLABLE = 'YES' THEN '√'
ELSE ''
END IS_NULLABLE ,
CASE WHEN tc.CONSTRAINT_TYPE = 'PRIMARY KEY' THEN '√'
ELSE ''
END AS IS_PRIMARY_KEY ,
CASE WHEN tc.CONSTRAINT_TYPE = 'FOREIGN KEY' THEN '√'
ELSE ''
END AS IS_FOREIGN_KEY ,
ISNULL(fkcu.COLUMN_NAME, '') AS FOREIGN_KEY ,
ISNULL(fkcu.TABLE_NAME, '') AS FOREIGN_TABLE
FROM [INFORMATION_SCHEMA].[COLUMNS] c
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] kcu ON kcu.TABLE_SCHEMA = c.TABLE_SCHEMA
AND kcu.TABLE_NAME = c.TABLE_NAME
AND kcu.COLUMN_NAME = c.COLUMN_NAME
LEFT JOIN [INFORMATION_SCHEMA].[TABLE_CONSTRAINTS] tc ON tc.CONSTRAINT_SCHEMA = kcu.CONSTRAINT_SCHEMA
AND tc.CONSTRAINT_NAME = kcu.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[REFERENTIAL_CONSTRAINTS] fc ON kcu.CONSTRAINT_SCHEMA = fc.CONSTRAINT_SCHEMA
AND kcu.CONSTRAINT_NAME = fc.CONSTRAINT_NAME
LEFT JOIN [INFORMATION_SCHEMA].[KEY_COLUMN_USAGE] fkcu ON fkcu.CONSTRAINT_SCHEMA = fc.UNIQUE_CONSTRAINT_SCHEMA
AND fkcu.CONSTRAINT_NAME = fc.UNIQUE_CONSTRAINT_NAME
WHERE c.TABLE_NAME = 'Address'
ORDER BY c.ORDINAL_POSITION
運行結果如圖：
有不對的地方還請大家拍磚！
相關文章
Navicat 連接MySQL8.0.11出現2059錯誤
這篇文章主要介紹了Navicat 連接MySQL8.0.11出現2059錯誤,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-11-11
解決MySQL 8.0以上版本設置大小寫不敏感的問題
MySQL 8.0以上版本默認區分大小寫,但在低版本（如5.7）中,可以通過在my.cnf配置文件的[mysqld]節下添加lower_case_table_names=1來設置大小寫不敏感,本篇博客將介紹如何解決MySQL 8.0以上版本設置大小寫不敏感的問題,需要的朋友可以參考下2023-11-11
本文主要介紹了MySQL實現查詢分位值的示例代碼，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-04-04
在本篇內容里小編給大家整理了關于MySQL大小寫敏感導致的問題的詳細分析，有興趣的朋友們可以學習參考下。2019-06-06
這篇文章主要給大家介紹了MySQL數據庫忽略大小寫的配置方法,文中通過代碼示例給大家講解的非常詳細,對大家的學習或工作有一定的幫助,需要的朋友可以參考下2024-01-01
這篇文章主要介紹了Mysql實現實時備份,需要的朋友可以參考下2016-02-02
MySQL8.0窗口函數入門實踐及總結
這篇文章主要給大家介紹了關于MySQL8.0窗口函數入門實踐及總結的相關資料，文中通過示例代碼介紹的非常詳細，對大家的學習或者使用MySQL8.0具有一定的參考學習價值，需要的朋友們下面來一起學習學習吧2020-06-06
deepin 2014系統下安裝mysql數據庫的方法步驟
這篇文章主要給大家介紹了在deepin 2014系統下安裝mysql數據庫的方法步驟，文中通過圖文介紹的非常詳細，相信對大家具有一定的參考價值，需要的朋友們下面來一起看看吧。2017-04-04
這篇文章介紹了SQL查詢至少連續n天登錄用戶的方法，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-01-01
MySQL在關聯復雜情況下所能做出的一些優化
這篇文章主要介紹了MySQL在關聯復雜情況下所能做出的一些優化,作者通過添加索引來不斷優化查詢時間,需要的朋友可以參考下2015-05-05