MySQL單表ibd文件恢復方法詳解

更新時間：2012年11月12日 10:15:00 作者：

隨著innodb的普及，innobackup也成為了主流備份方式。物理備份對于新建slave，全庫恢復的需求都能從容應對；但當面臨單表數據誤刪，或者單表誤drop的情況，如果使用物理全備進行恢復呢

前言：
隨著innodb的普及，innobackup也成為了主流備份方式。物理備份對于新建slave，全庫恢復的需求都能從容應對。
但當面臨單表數據誤刪，或者單表誤drop的情況，如果使用物理全備進行恢復呢？
下文將進行詳細分析。
恢復過程中需要用到的工具，percona data recover tool ： https://launchpad.net/percona-innodb-recovery-tool

情況一：誤刪部分?jǐn)?shù)據，需要用最近一次備份覆蓋
來自同一臺機器的ibd恢復覆蓋，且備份后table沒有被recreate過。
這種情況是最簡單的，備份時的ibd文件（后稱老ibd）中的space id和index id 與新ibd的space id 和index id一致。
且和ibdata文件中的space id和index id一致。因此，物理文件可以直接覆蓋做恢復。
以下是詳細步驟

Step -1 : 物理備份
innobackupex --defaults-file=/usr/local/mysql3321/my.cnf --socket=/xfs/mysql3321/mysql.sock --user=root --password=password /xfs/backup/
Step 0 : apply log
innobackupex --apply-log --defaults-file=/usr/local/mysql3321/my.cnf /xfs/backup/2012-10-17_11-29-20/
Step 1 : 備份現在的ibd文件（可選）
cp -a testibd.ibd testibd.bak
Step 2 : 舍棄現在ibd文件
mysql> alter table testibd discard tablespace
Step 3 : 復制備份ibd文件
shell> cp /xfs/backup/2012-10-17_11-29-20/test/testibd.ibd /xfs/mysql3321/test/
shell> chown mysql:mysql /xfs/mysql3321/test/testibd.ibd
Step 4 : 導入ibd文件
mysql> alter table testibd import tablespace

情況二：誤刪 table，表結構已經被drop了
這種情況稍復雜，不過恢復過程還是比較容易操作的。由于table被drop后的space id會留空因此備份文件的space id不會被占用。
我們只需要重建表結構，然后把ibdata中該表的space id還原，物理文件可以直接覆蓋做恢復了。

Step 1 : 重建表
mysql> create table testibd (UserID int);
Step 2 : 關閉mysql服務（必須）
shell> service mysqld3321 stop
Step 3: 準備ibd文件 apply log
shell> innobackupex --apply-log --defaults-file=/usr/local/mysql3321/my.cnf /xfs/backup/2012-10-17_11-29-20/
Step 4 : 備份現在的ibd文件（可選）
cp -a testibd.ibd testibd.bak
Step 5 : 復制備份ibd文件
shell> cp -a /xfs/backup/2012-10-17_11-29-20/test/testibd.ibd /xfs/mysql3321/test/
shell> chown mysql:mysql /xfs/mysql3321/test/testibd.ibd
Step 6 : 使用percona recovery tool 修改ibdata
shell> /root/install/percona-data-recovery-tool-for-innodb-0.5/ibdconnect -o /xfs/mysql3321/ibdata1 -f /xfs/mysql3321/test/testibd.ibd -d test -t testibd

復制代碼代碼如下:

 
Initializing table definitions... 
Processing table: SYS_TABLES 
- total fields: 10 
- nullable fields: 6 
- minimum header size: 5 
- minimum rec size: 21 
- maximum rec size: 555 
Processing table: SYS_INDEXES 
- total fields: 9 
- nullable fields: 5 
- minimum header size: 5 
- minimum rec size: 29 
- maximum rec size: 165 
Setting SPACE=1 in SYS_TABLE for `test`.`testibd` 
Check if space id 1 is already used 
Page_id: 8, next page_id: 4294967295 
Record position: 65 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 8 50 3 2 0 0 0 0 0 
Db/table: infimum 
Space id: 1768842857 (0x696E6669) 
Next record at offset: 8D 
Record position: 8D 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 11 17 24 32 36 40 48 52 52 
Db/table: SYS_FOREIGN 
Space id: 0 (0x0) 
Next record at offset: D5 
Record position: D5 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 16 22 29 37 41 45 53 57 57 
Db/table: SYS_FOREIGN_COLS 
Space id: 0 (0x0) 
Next record at offset: 122 
Record position: 122 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 12 18 25 33 37 41 49 53 53 
Db/table: test/testibd 
Space id: 2 (0x2) 
Next record at offset: 74 
Space id 1 is not used in any of the records in SYS_TABLES 
Page_id: 8, next page_id: 4294967295 
Record position: 65 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 8 50 3 2 0 0 0 0 0 
Db/table: infimum 
Space id: 1768842857 (0x696E6669) 
Next record at offset: 8D 
Record position: 8D 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 11 17 24 32 36 40 48 52 52 
Db/table: SYS_FOREIGN 
Space id: 0 (0x0) 
Next record at offset: D5 
Record position: D5 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 16 22 29 37 41 45 53 57 57 
Db/table: SYS_FOREIGN_COLS 
Space id: 0 (0x0) 
Next record at offset: 122 
Record position: 122 
Checking field lengths for a row (SYS_TABLES): OFFSETS: 16 12 18 25 33 37 41 49 53 53 
Db/table: test/testibd 
Space id: 2 (0x2) 
Updating test/testibd (table_id 17) with id 0x01000000 
SYS_TABLES is updated successfully 
Initializing table definitions... 
Processing table: SYS_TABLES 
- total fields: 10 
- nullable fields: 6 
- minimum header size: 5 
- minimum rec size: 21 
- maximum rec size: 555 
Processing table: SYS_INDEXES 
- total fields: 9 
- nullable fields: 5 
- minimum header size: 5 
- minimum rec size: 29 
- maximum rec size: 165 
Setting SPACE=1 in SYS_INDEXES for TABLE_ID = 17 
Page_id: 11, next page_id: 4294967295 
Record position: 65 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 50 7 2 0 0 0 0 
TABLE_ID: 3798561113125514496 
SPACE: 1768842857 
Next record at offset: 8C 
Record position: 8C 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 16 22 29 35 39 43 47 
TABLE_ID: 11 
SPACE: 0 
Next record at offset: CE 
Record position: CE 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 16 22 29 36 40 44 48 
TABLE_ID: 11 
SPACE: 0 
Next record at offset: 111 
Record position: 111 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 16 22 29 36 40 44 48 
TABLE_ID: 11 
SPACE: 0 
Next record at offset: 154 
Record position: 154 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 16 22 29 35 39 43 47 
TABLE_ID: 12 
SPACE: 0 
Next record at offset: 22C 
Record position: 22C 
Checking field lengths for a row (SYS_INDEXES): OFFSETS: 15 8 16 22 29 44 48 52 56 
TABLE_ID: 17 
SPACE: 2 
Updating SPACE(0x00000001 , 0x01000000) for TABLE_ID: 17 
sizeof(s)=4 
Next record at offset: 74 
SYS_INDEXES is updated successfully 

Step 7 : 使用percona recovery tool 重新checksum ibdata
重復執行以下命令，直到程序沒有輸出為止。
shell> /root/install/percona-data-recovery-tool-for-innodb-0.5/innochecksum -f /xfs/mysql3321/ibdata1

復制代碼代碼如下:

 
page 8 invalid (fails old style checksum) 
page 8: old style: calculated = 0xF4AD74CB; recorded = 0xEECB309D 
fixing old checksum of page 8 
page 8 invalid (fails new style checksum) 
page 8: new style: calculated = 0x6F0C29B4; recorded = 0x3D02308C 
fixing new checksum of page 8 
page 11 invalid (fails old style checksum) 
page 11: old style: calculated = 0x3908087C; recorded = 0xF9E8D30C 
fixing old checksum of page 11 
page 11 invalid (fails new style checksum) 
page 11: new style: calculated = 0xB26CFD77; recorded = 0xDB25D39D 
fixing new checksum of page 11 

Step 8 : 啟動mysql服務
shell> service mysqld3321 start

您可能感興趣的文章: