python輕量級性能工具-Locust詳解
Locust基于python的協程機制,打破了線程進程的限制,可以能夠在一臺測試機上跑高并發
性能測試基礎
1.快慢:衡量系統的處理效率:響應時間
2.多少:衡量系統的處理能力:單位時間內能處理多少個事務(tps)
性能測試根據測試需求最常見的分為下面三類
1 負載測試load testing
不斷向服務器加壓,值得預定的指標或者部分系統資源達到瓶頸,目的是找到系統最大負載的能力
2 壓力測試
通過高負載持續長時間,來驗證系統是否穩定
3 并發測試:
同時像服務器提交請求,目的發現系統是否存在事務沖突或者鎖升級的現象
性能負載模型

locust安裝
安裝存在問題,可以通過豆瓣源下載
pip install locust
locust模板
基本上多數的場景我們都可以基于這個模板read.py去做修改
from locust import HttpUser, TaskSet, task, tag, events
# 啟動locust時運行
@events.test_start.add_listener
def setup(environment, **kwargs):
# print("task setup")
# 停止locust時運行
@events.test_stop.add_listener
def teardown(environment, **kwargs):
print("task teardown")
class UserBehavor(TaskSet):
#虛擬用戶啟用task運行
def on_start(self):
print("start")
locusts_spawned.wait()
#虛擬用戶結束task運行
def on_stop(self):
print("stop")
@tag('test1')
@task(2)
def index(self):
self.client.get('/yetangjian/p/17320268.html')
@task(1)
def info(self):
self.client.get("/yetangjian/p/17253215.html")
class WebsiteUser(HttpUser):
def setup(self):
print("locust setup")
def teardown(self):
print("locust teardown")
host = "https://www.cnblogs.com"
task_set = task(UserBehavor)
min_wait = 3000
max_wait = 5000注:這里我們給了一個webhost,這樣我們可以直接在瀏覽器中打開locust
集合點lr_rendezvous
當然我們可以把集合點操作放入上述模板的setup中去運行起來
locusts_spawned = Semaphore()
locusts_spawned.acquire()
def on_hatch_complete(**kwargs):
"""
select_task類的鉤子函數
:param kwargs:
:return:
"""
locusts_spawned.release()
events.spawning_complete.add_listener(on_hatch_complete)
n = 0
class UserBehavor(TaskSet):
def login(self):
global n
n += 1
print(f"第{n}個用戶登陸")
def on_start(self):
self.login()
locusts_spawned.wait()
@task
def test1(self):
#catch_response獲取返回
with self.client.get("/yetangjian/p/17253215.html",catch_response=True):
print("查詢結束")
class WebsiteUser(HttpUser):
host = "https://www.cnblogs.com"
task_set = task(UserBehavor)
wait_time = between(1,3)
if __name__ == '__main__':
os.system('locust -f read.py --web-host="127.0.0.1"')比較常見的用法
在上面兩個例子中我們已經看到了一些,例如裝飾器events.test_start.add_listener;events.test_stop.add_listener用來在負載測試前后進行一些操作,又例如on_start、on_stop,在task執行前后運行,又例如task,可以用來分配任務的權重
等待時間
# wait between 3.0 and 10.5 seconds after each task #wait_time = between(3.0, 10.5) #固定時間等待 # wait_time = constant(3) #確保每秒運行多少次 constant_throughput(task_runs_per_second) #確保每多少秒運行一次 constant_pacing(wait_time)
同樣也可以在User類下發重寫wait_time來達到自定義
tag標記
@tag('test1')
@task(2)
def index(self):
self.client.get('/yetangjian/p/17320268.html')通過對任務打標記,就可以在運行時候執行運行某一些任務:
#只執行標記test1
os.system('locust -f read.py --tags test1 --web-host="127.0.0.1"')
#不執行標記過的
os.system('locust -f read.py --exclude-tags --web-host="127.0.0.1"')
#除去test1執行所有
os.system('locust -f read.py --exclude-tags test1 --web-host="127.0.0.1"')自定義失敗
#定義響應時間超過0.1就為失敗
with self.client.get("/yetangjian/p/17253215.html", catch_response=True) as response:
if response.elapsed.total_seconds() > 0.1:
response.failure("Request took too long")
#定義響應碼是200就為失敗
with self.client.get("/yetangjian/p/17320268.html", catch_response=True) as response:
if response.status_code == 200:
response.failure("響應碼200,但我定義為失敗")
自定義負載形狀
自定義一個shape.py通過繼承LoadTestShape并重寫tick
這個形狀類將以100塊為單位,20速率的增加用戶數,然后在10分鐘后停止負載測試(從運行開始的第51秒開始user_count會round到100)
from locust import LoadTestShape
class MyCustomShape(LoadTestShape):
time_limit = 600
spawn_rate = 20
def tick(self):
run_time = self.get_run_time()
if run_time < self.time_limit:
# User count rounded to nearest hundred.
user_count = round(run_time, -2)
return (user_count, self.spawn_rate)
return None運行圖如下所示

通過命令行去觸發
os.system('locust -f read.py,shape.py --web-host="127.0.0.1"')不同時間階段的例子
from locust import LoadTestShape
class StagesShapeWithCustomUsers(LoadTestShape):
stages = [
{"duration": 10, "users": 10, "spawn_rate": 10},
{"duration": 30, "users": 50, "spawn_rate": 10},
{"duration": 60, "users": 100, "spawn_rate": 10},
{"duration": 120, "users": 100, "spawn_rate": 10}]
def tick(self):
run_time = self.get_run_time()
for stage in self.stages:
if run_time < stage["duration"]:
tick_data = (stage["users"], stage["spawn_rate"])
return tick_data
return None到此這篇關于python輕量級性能工具-Locust的文章就介紹到這了,更多相關python性能工具Locust內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
python 生成正態分布數據,并繪圖和解析
這篇文章主要介紹了python 生成正態分布數據,并繪圖和解析,幫助大家更好的利用python進行數據分析,感興趣的朋友可以了解下2020-12-12
django-simple-captcha多種驗證碼的實現方法
本文介紹了如何在Django項目中配置和使用不同類型的驗證碼,包括數字驗證碼、字母驗證碼和算術驗證碼,每種驗證碼結合實例代碼給大家介紹得非常詳細,感興趣的朋友跟隨小編一起看看吧2024-12-12
TensorFlow實現隨機訓練和批量訓練的方法
本篇文章主要介紹了TensorFlow實現隨機訓練和批量訓練的方法,小編覺得挺不錯的,現在分享給大家,也給大家做個參考。一起跟隨小編過來看看吧2018-04-04

