idea搭建SSM框架遇踩的坑(附完整過程)

更新時間：2023年04月01日 11:10:29 作者：臨溪上

最近準備搭建一個SSM框架,由于很久沒有搭建了,一來就遇到各種問題,折騰了一天終于搞定了,特此記錄一下遇到的問題,下面這篇文章主要給大家介紹了關于idea搭建SSM框架遇踩的坑,文中還附完整過程,需要的朋友可以參考下

首先說明這是我一個不熟悉idea和SSM框架的新手小白遇到的坑，適合用idea搭建SSM框架的小伙伴看一看，老鳥就不用看了。以下為詳細步驟（傻瓜教程，超級細節）

搭建SSM框架的前提當然是我們已經準備好一下環境

安裝好的intellige idea， java環境，tomcat服務器，maven倉庫，mysql數據庫。

打開idea，new一個project，選擇maven項目，如圖，注意不要選錯成上面那個webapp

點擊next繼續，

groupid一般是公司名，Artfactid一般為項目名，對于idea的項目目錄結構，我自己也沒弄明白，不過這并不影響我們的目標

點擊next繼續，

這里我們使用自己的本地maven倉庫，注意setting.xml,repository路徑的修改。next繼續，然后finish。

第一次建web maven項目可能需要的時間比較長，耐心等待Maven execution finished。最后的項目結構如下圖

我們需要在main包下面新建一個java根目錄

然后再java目錄下創建package com.ssm 如圖

再在com.ssm下創建一個a.txt文件來分隔路徑

然后在com.ssm 下創建一下6個package，然后刪除a.txt,最后如下

修改pom.xml的內容如下

<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
  <modelVersion>4.0.0</modelVersion>
  <groupId>自己項目的groupId</groupId>
  <artifactId>自己項目對應</artifactId>
  <packaging>war</packaging>
  <version>1.0-SNAPSHOT</version>
  <name>同上對應 Maven Webapp</name>
  <url>http://maven.apache.org</url>
  <properties>
    <!-- spring版本號 -->
    <spring.version>4.0.2.RELEASE</spring.version>
    <!-- mybatis版本號 -->
    <mybatis.version>3.2.6</mybatis.version>
    <!-- log4j日志文件管理包版本 -->
    <slf4j.version>1.7.7</slf4j.version>
    <log4j.version>1.2.17</log4j.version>
  </properties>
  <dependencies>
    <dependency>
      <groupId>junit</groupId>
      <artifactId>junit</artifactId>
      <version>4.11</version>
      <!-- 表示開發的時候引入，發布的時候不會加載此包 -->
      <scope>test</scope>
    </dependency>
    <!-- spring核心包 -->
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-core</artifactId>
      <version>${spring.version}</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-web</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-oxm</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-tx</artifactId>
      <version>${spring.version}</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-jdbc</artifactId>
      <version>${spring.version}</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-webmvc</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-aop</artifactId>
      <version>${spring.version}</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-context-support</artifactId>
      <version>${spring.version}</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-test</artifactId>
      <version>${spring.version}</version>
    </dependency>
    <!-- mybatis核心包 -->
    <dependency>
      <groupId>org.mybatis</groupId>
      <artifactId>mybatis</artifactId>
      <version>${mybatis.version}</version>
    </dependency>
    <!-- mybatis/spring包 -->
    <dependency>
      <groupId>org.mybatis</groupId>
      <artifactId>mybatis-spring</artifactId>
      <version>1.2.2</version>
    </dependency>
    <!-- 導入java ee jar 包 -->
    <dependency>
      <groupId>javax</groupId>
      <artifactId>javaee-api</artifactId>
      <version>7.0</version>
    </dependency>
    <!-- 導入Mysql數據庫鏈接jar包 -->
    <dependency>
      <groupId>mysql</groupId>
      <artifactId>mysql-connector-java</artifactId>
      <version>5.1.30</version>
    </dependency>
    <!-- 導入dbcp的jar包，用來在applicationContext.xml中配置數據庫 -->
    <dependency>
      <groupId>commons-dbcp</groupId>
      <artifactId>commons-dbcp</artifactId>
      <version>1.2.2</version>
    </dependency>
    <!-- JSTL標簽類 -->
    <dependency>
      <groupId>jstl</groupId>
      <artifactId>jstl</artifactId>
      <version>1.2</version>
    </dependency>
    <!-- 日志文件管理包 -->
    <!-- log start -->
    <dependency>
      <groupId>log4j</groupId>
      <artifactId>log4j</artifactId>
      <version>${log4j.version}</version>
    </dependency>


    <!-- 格式化對象，方便輸出日志 -->
    <dependency>
      <groupId>com.alibaba</groupId>
      <artifactId>fastjson</artifactId>
      <version>1.1.41</version>
    </dependency>


    <dependency>
      <groupId>org.slf4j</groupId>
      <artifactId>slf4j-api</artifactId>
      <version>${slf4j.version}</version>
    </dependency>

    <dependency>
      <groupId>org.slf4j</groupId>
      <artifactId>slf4j-log4j12</artifactId>
      <version>${slf4j.version}</version>
    </dependency>
    <!-- log end -->
    <!-- 映入JSON -->
    <dependency>
      <groupId>org.codehaus.jackson</groupId>
      <artifactId>jackson-mapper-asl</artifactId>
      <version>1.9.13</version>
    </dependency>
    <!-- 上傳組件包 -->
    <dependency>
      <groupId>commons-fileupload</groupId>
      <artifactId>commons-fileupload</artifactId>
      <version>1.3.1</version>
    </dependency>
    <dependency>
      <groupId>commons-io</groupId>
      <artifactId>commons-io</artifactId>
      <version>2.4</version>
    </dependency>
    <dependency>
      <groupId>commons-codec</groupId>
      <artifactId>commons-codec</artifactId>
      <version>1.9</version>
    </dependency>

    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-messaging</artifactId>
      <version>4.0.5.RELEASE</version>
    </dependency>
    <dependency>
      <groupId>org.springframework</groupId>
      <artifactId>spring-websocket</artifactId>
      <version>4.0.5.RELEASE</version>
    </dependency>
    <dependency>
      <groupId>com.google.code.gson</groupId>
      <artifactId>gson</artifactId>
      <version>2.3.1</version>
    </dependency>

  </dependencies>

  <build>
    <finalName>ProjectMatch</finalName>
    <resources>
      <resource>
        <directory>${basedir}/src/main/java</directory>
        <includes>
          <include>**/*.xml</include>
        </includes>
      </resource>
    </resources>
  </build>
</project>

然后在resources目錄下新建如下4個文件如圖

jdbc.properties 內容如下，標紅的地方都需要按自己數據庫修改，test為數據庫名

driver=com.mysql.jdbc.Driver
url=jdbc:mysql://localhost:3306/test?useUnicode=true&characterEncoding=utf-8
username=root
password=123456
#定義初始連接數
initialSize=0
#定義最大連接數
maxActive=20
#定義最大空閑
maxIdle=20
#定義最小空閑
minIdle=1
#定義最長等待時間
maxWait=60000

log4j.properties內容如下，可完全復制

#定義LOG輸出級別
log4j.rootLogger=INFO,Console,File
#定義日志輸出目的地為控制臺
log4j.appender.Console=org.apache.log4j.ConsoleAppender
log4j.appender.Console.Target=System.out
#可以靈活地指定日志輸出格式，下面一行是指定具體的格式
log4j.appender.Console.layout = org.apache.log4j.PatternLayout
log4j.appender.Console.layout.ConversionPattern=[%c] - %m%n

#文件大小到達指定尺寸的時候產生一個新的文件
log4j.appender.File = org.apache.log4j.RollingFileAppender
#指定輸出目錄
log4j.appender.File.File = logs/ssm.log
#定義文件最大大小
log4j.appender.File.MaxFileSize = 10MB
# 輸出所以日志，如果換成DEBUG表示輸出DEBUG以上級別日志
log4j.appender.File.Threshold = ALL
log4j.appender.File.layout = org.apache.log4j.PatternLayout
log4j.appender.File.layout.ConversionPattern =[%p] [%d{yyyy-MM-dd HH\:mm\:ss}][%c]%m%n

spring-mvc.xml內容如下，紅色標記需要自己對應修改

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p"
       xmlns:context="http://www.springframework.org/schema/context"
       xmlns:mvc="http://www.springframework.org/schema/mvc"
       xsi:schemaLocation="http://www.springframework.org/schema/beans
                        http://www.springframework.org/schema/beans/spring-beans-3.1.xsd
                        http://www.springframework.org/schema/context
                        http://www.springframework.org/schema/context/spring-context-3.1.xsd
                        http://www.springframework.org/schema/mvc
                        http://www.springframework.org/schema/mvc/spring-mvc-4.0.xsd">
    <!-- 自動掃描該包，使SpringMVC認為包下用了@controller注解的類是控制器 -->
    <context:component-scan base-package="com.qihang.controller" />
    <!--避免IE執行AJAX時，返回JSON出現下載文件 -->
    <bean id="mappingJacksonHttpMessageConverter"
          class="org.springframework.http.converter.json.MappingJacksonHttpMessageConverter">
        <property name="supportedMediaTypes">
            <list>
                <value>text/html;charset=UTF-8</value>
            </list>
        </property>
    </bean>

    <import resource="classpath:spring-mybatis.xml" />

    <!-- 啟動SpringMVC的注解功能，完成請求和注解POJO的映射 -->
    <bean
            class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter">
        <property name="messageConverters">
            <list>
                <ref bean="mappingJacksonHttpMessageConverter" /> <!-- JSON轉換器 -->
            </list>
        </property>
    </bean>



    <!-- 定義跳轉的文件的前后綴 ，視圖模式配置-->
    <bean class="org.springframework.web.servlet.view.InternalResourceViewResolver">
        <!-- 這里的配置我的理解是自動給后面action的方法return的字符串加上前綴和后綴，變成一個 可用的url地址 -->
        <property name="prefix" value="/WEB-INF/page/" />
        <property name="suffix" value=".jsp" />
    </bean>

    <!-- 配置文件上傳，如果沒有使用文件上傳可以不用配置，當然如果不配，那么配置文件中也不必引入上傳組件包 -->
    <bean id="multipartResolver"
          class="org.springframework.web.multipart.commons.CommonsMultipartResolver">
        <!-- 默認編碼 -->
        <property name="defaultEncoding" value="utf-8" />
        <!-- 文件大小最大值 -->
        <property name="maxUploadSize" value="10485760000" />
        <!-- 內存中的最大值 -->
        <property name="maxInMemorySize" value="40960" />
    </bean>

    <mvc:annotation-driven/>
    <mvc:default-servlet-handler/>
    <!--<mvc:resources location="/" mapping="/js/**" />-->
    <!--<mvc:resources location="/css/" mapping="/css/**"/>-->
    <!--<mvc:resources location="/fonts/" mapping="/fonts/**"/>-->
    <!--<mvc:resources location="/resources/" mapping="/resources/**"/>-->
</beans>

spring-mybatis.xml內容如下同上

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p"
       xmlns:context="http://www.springframework.org/schema/context"
       xmlns:mvc="http://www.springframework.org/schema/mvc"
       xsi:schemaLocation="http://www.springframework.org/schema/beans
                        http://www.springframework.org/schema/beans/spring-beans-3.1.xsd
                        http://www.springframework.org/schema/context
                        http://www.springframework.org/schema/context/spring-context-3.1.xsd
                        http://www.springframework.org/schema/mvc
                        http://www.springframework.org/schema/mvc/spring-mvc-4.0.xsd">
    <!-- 自動掃描 -->
    <context:component-scan base-package="com.qihang" />
    <!-- 引入配置文件 -->
    <bean id="propertyConfigurer"
          class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
        <property name="location" value="classpath:jdbc.properties" />
    </bean>

    <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource"
          destroy-method="close">
        <property name="driverClassName" value="${driver}" />
        <property name="url" value="${url}" />
        <property name="username" value="${username}" />
        <property name="password" value="${password}" />
        <!-- 初始化連接大小 -->
        <property name="initialSize" value="${initialSize}"></property>
        <!-- 連接池最大數量 -->
        <property name="maxActive" value="${maxActive}"></property>
        <!-- 連接池最大空閑 -->
        <property name="maxIdle" value="${maxIdle}"></property>
        <!-- 連接池最小空閑 -->
        <property name="minIdle" value="${minIdle}"></property>
        <!-- 獲取連接最大等待時間 -->
        <property name="maxWait" value="${maxWait}"></property>
    </bean>

    <!-- spring和MyBatis完美整合，不需要mybatis的配置映射文件 -->
    <bean id="sqlSessionFactory" class="org.mybatis.spring.SqlSessionFactoryBean">
        <property name="dataSource" ref="dataSource" />
        <property name="configLocation" value="classpath:/mybatis-config.xml"></property>
        <!-- 自動掃描mapping.xml文件 -->
        <property name="mapperLocations" value="classpath:com/qihang/mapper/*.xml"></property>
    </bean>

    <!--&lt;!&ndash; spring和MyBatis完美整合，不需要mybatis的配置映射文件 &ndash;&gt;-->
    <!--<bean id="sqlSessionFactory" class="org.mybatis.spring.SqlSessionFactoryBean">-->
        <!--<property name="dataSource" ref="dataSource" />-->
        <!--<property name="configLocation" value="classpath:/mybatis-config.xml"></property>-->
        <!--&lt;!&ndash; 自動掃描mapping.xml文件 &ndash;&gt;-->
        <!--<property name="mapperLocations" value="classpath:com/qihang/mapper/*.xml"></property>-->
    <!--</bean>-->

    <!-- DAO接口所在包名，Spring會自動查找其下的類 -->
    <bean class="org.mybatis.spring.mapper.MapperScannerConfigurer">
        <property name="basePackage" value="com.qihang.dao" />
        <property name="sqlSessionFactoryBeanName" value="sqlSessionFactory"></property>
    </bean>

    <!-- (事務管理)transaction manager, use JtaTransactionManager for global tx -->
    <bean id="transactionManager"
          class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
        <property name="dataSource" ref="dataSource" />
    </bean>

</beans>

然后項目的web.xml也要對應修改如下，紅色標記同上

<!DOCTYPE web-app PUBLIC
        "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
        "http://java.sun.com/dtd/web-app_2_3.dtd" >

<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="http://java.sun.com/xml/ns/javaee"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd"
         version="3.0">
  <display-name>Archetype Created Web Application</display-name>
  <!-- Spring和mybatis的配置文件 -->
  <context-param>
    <param-name>contextConfigLocation</param-name>
    <param-value>classpath:spring-mybatis.xml</param-value>
  </context-param>

  <!--Log4j配置-->
  <context-param>
    <param-name>log4jRefreshInterval</param-name>
    <param-value>60000</param-value>
  </context-param>
  <listener>
    <listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
  </listener>

  <!-- 編碼過濾器 -->
  <filter>
    <filter-name>encodingFilter</filter-name>
    <filter-class>org.springframework.web.filter.CharacterEncodingFilter</filter-class>
    <init-param>
      <param-name>encoding</param-name>
      <param-value>UTF-8</param-value>
    </init-param>
  </filter>

  <filter-mapping>
    <filter-name>encodingFilter</filter-name>
    <url-pattern>/*</url-pattern>
  </filter-mapping>

  <!--Spring監聽器 ApplicationContext 載入 -->
  <listener>
    <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
  </listener>
  <!-- 防止Spring內存溢出監聽器 -->
  <listener>
    <listener-class>org.springframework.web.util.IntrospectorCleanupListener</listener-class>
  </listener>

  <!-- Spring MVC 核心配置開始 -->
  <servlet>
    <servlet-name>mvc-dispatcher</servlet-name>
    <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
    <!-- 可以通過contextConfigLocation來自定義SpringMVC配置文件的位置，如不指定，則默認在WEB-INF目錄下，名稱為[<servlet-name>]-servlet.xml，
         此時文件名必須為[<servlet-name>]-servlet.xml，否則會出錯-->
    <!--以下init-param是自定義SpringMVC的配置文件的位置 -->
    <init-param>
      <param-name>contextConfigLocation</param-name>
      <param-value>classpath:spring-mvc.xml</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    <async-supported>true</async-supported>
  </servlet>


  <!-- 攔截設置 -->
  <servlet-mapping>
    <servlet-name>mvc-dispatcher</servlet-name>
    <!-- 此處可以可以配置成*.do，對應struts的后綴習慣 -->
    <url-pattern>/</url-pattern>
  </servlet-mapping>
  <!-- Spring MVC 核心配置結束 -->

  <!-- 配置SESSION超時，單位是分鐘 -->
  <session-config>
    <session-timeout>15</session-timeout>
  </session-config>

</web-app>

然后我們就可以編寫測試了。

在數據庫中創建user表，有兩條記錄，如圖

在pojo包中創建user類

package com.qihang.pojo;

import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.Table;

@Entity
@Table(name = "user")
public class user {

    @Column(name = "username")
    String username;

    @Column(name = "password")
    String password;

    public String getUsername() {
        return username;
    }

    public void setUsername(String username) {
        this.username = username;
    }

    public String getPassword() {
        return password;
    }

    public void setPassword(String password) {
        this.password = password;
    }
}

在dao包中創建userDao接口

package com.qihang.dao;

import com.qihang.pojo.user;

public interface userDao {
    public user selectByUserId(String username);

    public int insertUser(user user);
}

在mapper包中創建userMapping.xml

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN" "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper namespace="com.qihang.dao.userDao" >
    <resultMap id="BaseResultMap" type="com.qihang.pojo.user" ><!--對應的實體類位置 -->
        <result column="username" property="username" jdbcType="VARCHAR" />
        <result column="password" property="password" jdbcType="VARCHAR" />
    </resultMap>

    <sql id="userAtr">
        #{username},#{password}
    </sql>

    <select id="selectByUserId" parameterType="String" resultMap="BaseResultMap">
        SELECT
        *
        FROM user
        WHERE 1=1
        <if test="_parameter != null">
            AND username = #{username}
        </if>
    </select>

    <insert id="insertUser" parameterType="java.util.HashMap">
        INSERT  INTO user
        VALUE(<include refid="userAtr"></include>)
    </insert>
</mapper>

在services包中創建userService接口

package com.qihang.services;

import com.qihang.pojo.user;

public interface userService {
    public user querybyUsername(String username);

    public int insert(user user);
}

在servicesImp中創建userServiceImp類

package com.qihang.servicesImp;

import com.qihang.pojo.user;
import com.qihang.services.userService;
import com.qihang.dao.userDao;
import org.springframework.stereotype.Service;
import org.springframework.beans.factory.annotation.Autowired;

@Service("userServiceImp")
public class userServiceImp implements userService {

    @Autowired
    private userDao userDao;
    public int insert(user user) {
        return userDao.insertUser(user);
    }

    public user querybyUsername(String username) {
        return userDao.selectByUserId(username);
    }
}

在WEB-INF下創建page包，然后在page包中創建test.jsp文件如圖

<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<html>
<body>
用戶名<h1>${user.username}</h1>
密碼<h1>${user.password}</h1>
</body>
</html>

然后在controller包下創建userController類

package com.qihang.controller;

import com.qihang.pojo.user;
import com.qihang.services.userService;
import org.springframework.stereotype.Controller;
import org.springframework.ui.Model;
import org.springframework.web.bind.annotation.ModelAttribute;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.web.bind.annotation.RequestParam;

@Controller
public class UserController {
    @Autowired
    private userService userService;

    @RequestMapping("/query")
    public String query(@RequestParam(value = "username",required = true) String username, Model model){
        user user = new user();
        user = userService.querybyUsername(username);
        model.addAttribute("user",user);
        return "test";

做到這里就把測試domo寫完了，下一步將項目部署到服務器。

如圖點擊配置

點擊 +

將本地tomcat配置好，按如圖deployment

配置好就完成了。點擊運行，在瀏覽器上輸入

http://localhost:8080/query?username=lisi

看到如下就說明我們配置ok了

謝謝你們，看到這里也是幸苦了，如果還沒有成功的再認真看看還有哪里是不是遺漏了，也可以在樓下留言，千萬別灰心，程序員工作就是與bug作斗爭的過程，也是在這些坑中慢慢學習的。

對于新手小白，經常會花很多時間在這些框架的搭建上或是一些工具的配置，而且由于不熟悉，會踩很多坑，花大量時間在這上面確實很不值得的。寫這篇博客也是為大家能在學習的路上能更順利些，當然也是給自己的踩坑路做個記錄吧

總結

到此這篇關于idea搭建SSM框架遇踩的坑的文章就介紹到這了,更多相關idea搭建SSM框架內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: