解讀@RabbitListener起作用的原理
一、前言
在spring中，定義rabbitMq的消費者可以相當方便，只需要在消息處理類或者類方法加上@RabbitListener注解，指定隊列名稱即可。
如下代碼：
@Component
public class RabbitMqListener1 {
? ? @RabbitListener(queues = "queue1")
? ? public void consumer1(Message message) {
? ? }
? ? @RabbitListener(queues = "queue2")
? ? public void consumer2(String messsageBody) {
? ? }
}
@Component
@RabbitListener(queues = "queue3")
public class RabbitMqListener2 {
? ? @RabbitHandler(isDefault=true)
? ? public void consumer3() {
? ? }
}注意！??！如果@RabbitListener加在類上面，需要有一個默認的處理方法@RabbitHandler(isDefault=true)，默認是false。
不設置一個true，消費mq消息的時候會出現“Listener method ‘no match’ threw exception”異常。
原因在RabbitListenerAnnotationBeanPostProcessor.processMultiMethodListeners方法，有興趣的可以看下。
可以看到代碼相當?shù)暮?jiǎn)單。但是?。?！為什么加上這個注解，就能作為一個consumer接受mq的消息呢？為啥處理mq消息的方法，入?yún)⒖梢阅敲措S意？
有經驗的程序員，可能會有這樣的設想：
1、單純看這些listener的代碼，只是定義了由spring管理的bean，要能監聽rabbitMq的消息，肯定需要有另外一個類，這個類會掃描所有加了@RabbitListener的bean，進行加工。
2、看這些listener的代碼，可以發現處理mq消息的，都是具體的某個方法。那加工的過程，應該就是利用反射拿到對象、方法和@RabbitListener中的queue屬性，然后建立一個綁定關系（對象+方法）——>（queue的consumer）。queue的consumer在接收到mq消息后，找到綁定的“對象+方法”，再通過反射的方式，調用真正的處理方法。
3、mq消息的處理方法，可以那么隨意，應該是queue的consumer在調用真正處理方法之前，需要根據處理方法的參數類型，做一次數據轉換。
接下來，就去看看源碼，看一下設想是不是正確的~~
二、源碼分析
1、誰來掃描@RabbitListener注解的bean
在springBoot使用rabbit，一般是在@Configuration類上加上@EnableRabbit注解來開啟rabbit功能。那我們就去看看@EnableRabbit注解的源碼，看這個注解的作用
@Target(ElementType.TYPE)
@Retention(RetentionPolicy.RUNTIME)
@Documented
@Import(RabbitBootstrapConfiguration.class)
public @interface EnableRabbit {
}可以看到，這個注解的作用，是導入RabbitBootstrapConfiguration配置類
@Configuration
public class RabbitBootstrapConfiguration {
?? ?@Bean(name = RabbitListenerConfigUtils.RABBIT_LISTENER_ANNOTATION_PROCESSOR_BEAN_NAME)
?? ?@Role(BeanDefinition.ROLE_INFRASTRUCTURE)
?? ?public RabbitListenerAnnotationBeanPostProcessor rabbitListenerAnnotationProcessor() {
?? ??? ?return new RabbitListenerAnnotationBeanPostProcessor();
?? ?}
?? ?@Bean(name = RabbitListenerConfigUtils.RABBIT_LISTENER_ENDPOINT_REGISTRY_BEAN_NAME)
?? ?public RabbitListenerEndpointRegistry defaultRabbitListenerEndpointRegistry() {
?? ??? ?return new RabbitListenerEndpointRegistry();
?? ?}
}RabbitBootstrapConfiguration 配置類的作用，就是定義了RabbitListenerAnnotationBeanPostProcessor 和RabbitListenerEndpointRegistry 兩個bean。
看到RabbitListenerAnnotationBeanPostProcessor 這個類名，就可以猜到，該類的實例bean就是用來掃描加了@RabbitListener 的類，并做一些加工。
（“RabbitListenerAnnotationBean”——針對添加了@RabbitListener注解的bean； “PostProcessor”——后置加工）
2、怎么建立（對象+方法）——>（queue的consumer）的映射關系
分析一下RabbitListenerAnnotationBeanPostProcessor類的源碼
// 實現了BeanPostProcessor、Ordered、BeanFactoryAware、BeanClassLoaderAware、EnvironmentAware和SmartInitializingSingleton 6個接口
public class RabbitListenerAnnotationBeanPostProcessor
?? ??? ?implements BeanPostProcessor, Ordered, BeanFactoryAware, BeanClassLoaderAware, EnvironmentAware,
?? ??? ?SmartInitializingSingleton {
?? ??? ?
?? ?.......
?? ?
?? ?// 完成初始化bean之后，調用該方法
?? ?@Override
?? ?public Object postProcessAfterInitialization(final Object bean, final String beanName) throws BeansException {
?? ??? ?Class<?> targetClass = AopUtils.getTargetClass(bean);
?? ??? ?TypeMetadata metadata = this.typeCache.get(targetClass);
?? ??? ?if (metadata == null) {
?? ??? ??? ?metadata = buildMetadata(targetClass);
?? ??? ??? ?this.typeCache.putIfAbsent(targetClass, metadata);
?? ??? ?}
?? ??? ?for (ListenerMethod lm : metadata.listenerMethods) {
?? ??? ??? ?for (RabbitListener rabbitListener : lm.annotations) {
?? ??? ??? ??? ?processAmqpListener(rabbitListener, lm.method, bean, beanName);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?if (metadata.handlerMethods.length > 0) {
?? ??? ??? ?processMultiMethodListeners(metadata.classAnnotations, metadata.handlerMethods, bean, beanName);
?? ??? ?}
?? ??? ?return bean;
?? ?}
?? ?// 根據Class，獲取元數據
?? ?private TypeMetadata buildMetadata(Class<?> targetClass) {
?? ??? ?Collection<RabbitListener> classLevelListeners = findListenerAnnotations(targetClass);
?? ??? ?final boolean hasClassLevelListeners = classLevelListeners.size() > 0;
?? ??? ?final List<ListenerMethod> methods = new ArrayList<ListenerMethod>();
?? ??? ?final List<Method> multiMethods = new ArrayList<Method>();
?? ??? ?ReflectionUtils.doWithMethods(targetClass, new ReflectionUtils.MethodCallback() {
?? ??? ??? ?@Override
?? ??? ??? ?public void doWith(Method method) throws IllegalArgumentException, IllegalAccessException {
?? ??? ??? ??? ?Collection<RabbitListener> listenerAnnotations = findListenerAnnotations(method);
?? ??? ??? ??? ?if (listenerAnnotations.size() > 0) {
?? ??? ??? ??? ??? ?methods.add(new ListenerMethod(method,
?? ??? ??? ??? ??? ??? ??? ?listenerAnnotations.toArray(new RabbitListener[listenerAnnotations.size()])));
?? ??? ??? ??? ?}
?? ??? ??? ??? ?if (hasClassLevelListeners) {
?? ??? ??? ??? ??? ?RabbitHandler rabbitHandler = AnnotationUtils.findAnnotation(method, RabbitHandler.class);
?? ??? ??? ??? ??? ?if (rabbitHandler != null) {
?? ??? ??? ??? ??? ??? ?multiMethods.add(method);
?? ??? ??? ??? ??? ?}
?? ??? ??? ??? ?}
?? ??? ??? ?}
?? ??? ?}, ReflectionUtils.USER_DECLARED_METHODS);
?? ??? ?if (methods.isEmpty() && multiMethods.isEmpty()) {
?? ??? ??? ?return TypeMetadata.EMPTY;
?? ??? ?}
?? ??? ?return new TypeMetadata(
?? ??? ??? ??? ?methods.toArray(new ListenerMethod[methods.size()]),
?? ??? ??? ??? ?multiMethods.toArray(new Method[multiMethods.size()]),
?? ??? ??? ??? ?classLevelListeners.toArray(new RabbitListener[classLevelListeners.size()]));
?? ?}
?? ?// 檢查一下是否使用jdk代理，使用jdk代理方式必須實現了接口
?? ?// new一個MethodRabbitListenerEndpoint對象，交由processListener方法進行處理
?? ?protected void processAmqpListener(RabbitListener rabbitListener, Method method, Object bean, String beanName) {
?? ??? ?Method methodToUse = checkProxy(method, bean);
?? ??? ?MethodRabbitListenerEndpoint endpoint = new MethodRabbitListenerEndpoint();
?? ??? ?endpoint.setMethod(methodToUse);
?? ??? ?endpoint.setBeanFactory(this.beanFactory);
?? ??? ?processListener(endpoint, rabbitListener, bean, methodToUse, beanName);
?? ?}
// 前面大半代碼都是對MethodRabbitListenerEndpoint對象的屬性設置：處理消息的bean、消息處理方法的工廠類、監聽的隊列名。。。。
// 通過beanFactory獲取RabbitListenerContainerFactory類的bean
// 調用RabbitListenerEndpointRegistar的registerEndpoint方法注冊mq消息消費端點
protected void processListener(MethodRabbitListenerEndpoint endpoint, RabbitListener rabbitListener, Object bean,
?? ??? ??? ?Object adminTarget, String beanName) {
?? ??? ?endpoint.setBean(bean);
?? ??? ?endpoint.setMessageHandlerMethodFactory(this.messageHandlerMethodFactory);
?? ??? ?endpoint.setId(getEndpointId(rabbitListener));
?? ??? ?endpoint.setQueueNames(resolveQueues(rabbitListener));
?? ??? ?String group = rabbitListener.group();
?? ??? ?if (StringUtils.hasText(group)) {
?? ??? ??? ?Object resolvedGroup = resolveExpression(group);
?? ??? ??? ?if (resolvedGroup instanceof String) {
?? ??? ??? ??? ?endpoint.setGroup((String) resolvedGroup);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?endpoint.setExclusive(rabbitListener.exclusive());
?? ??? ?String priority = resolve(rabbitListener.priority());
?? ??? ?if (StringUtils.hasText(priority)) {
?? ??? ??? ?try {
?? ??? ??? ??? ?endpoint.setPriority(Integer.valueOf(priority));
?? ??? ??? ?}
?? ??? ??? ?catch (NumberFormatException ex) {
?? ??? ??? ??? ?throw new BeanInitializationException("Invalid priority value for " +
?? ??? ??? ??? ??? ??? ?rabbitListener + " (must be an integer)", ex);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?String rabbitAdmin = resolve(rabbitListener.admin());
?? ??? ?if (StringUtils.hasText(rabbitAdmin)) {
?? ??? ??? ?Assert.state(this.beanFactory != null, "BeanFactory must be set to resolve RabbitAdmin by bean name");
?? ??? ??? ?try {
?? ??? ??? ??? ?endpoint.setAdmin(this.beanFactory.getBean(rabbitAdmin, RabbitAdmin.class));
?? ??? ??? ?}
?? ??? ??? ?catch (NoSuchBeanDefinitionException ex) {
?? ??? ??? ??? ?throw new BeanInitializationException("Could not register rabbit listener endpoint on [" +
?? ??? ??? ??? ??? ??? ?adminTarget + "], no " + RabbitAdmin.class.getSimpleName() + " with id '" +
?? ??? ??? ??? ??? ??? ?rabbitAdmin + "' was found in the application context", ex);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?RabbitListenerContainerFactory<?> factory = null;
?? ??? ?String containerFactoryBeanName = resolve(rabbitListener.containerFactory());
?? ??? ?if (StringUtils.hasText(containerFactoryBeanName)) {
?? ??? ??? ?Assert.state(this.beanFactory != null, "BeanFactory must be set to obtain container factory by bean name");
?? ??? ??? ?try {
?? ??? ??? ??? ?factory = this.beanFactory.getBean(containerFactoryBeanName, RabbitListenerContainerFactory.class);
?? ??? ??? ?}
?? ??? ??? ?catch (NoSuchBeanDefinitionException ex) {
?? ??? ??? ??? ?throw new BeanInitializationException("Could not register rabbit listener endpoint on [" +
?? ??? ??? ??? ??? ??? ?adminTarget + "] for bean " + beanName + ", no " +
?? ??? ??? ??? ??? ??? ?RabbitListenerContainerFactory.class.getSimpleName() + " with id '" +
?? ??? ??? ??? ??? ??? ?containerFactoryBeanName + "' was found in the application context", ex);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?this.registrar.registerEndpoint(endpoint, factory);
?? ?}
?? ?........
}這個類的代碼比較長，只貼部分比較主要的部分，其他的，可以自己查看源碼進行了解。
RabbitListenerAnnotationBeanPostProcessor實現了BeanPostProcessor（bean初始化后的后置處理）、Ordered（后置處理的排序）、BeanFactoryAware（注入BeanFactory）、BeanClassLoaderAware(注入BeanClassLoader)、EnvironmentAware（注入spring環境）和SmartInitializingSingleton（單例bean初始化后的回調） 6個接口。
我們需要關注的是BeanPostProcessor接口定義的方法，看postProcessAfterInitialization方法的代碼，大致流程為：
1、通過AopUtils得到bean代理的對象的class
2、判斷緩存中是否有該class的類型元數據，如果沒有則調用buildMetadata方法生成類型元數據并放入緩存
3、遍歷加了@RabbitListener注解的方法，調用processAmqpListener方法進行處理
4、調用processMultiMethodListeners方法對加了@RabbitHandler的方法進行處理
關于buildMetadata方法：
代碼不復雜，就是利用反射，拿到class中，添加了@RabbitListener和@RabbitHandler注解的方法。另外，從代碼中也可以看出，@RabbitHandler注解要生效，必須在class上增加@RabbitListener注解
關于processAmqpListener方法：
沒有什么實際內容，就干兩個事情：
1、檢查一下是否使用jdk代理，使用jdk代理方式必須實現了接口
2、new一個MethodRabbitListenerEndpoint對象，交由processListener方法進行處理
關于processListener方法：
1、前面大半代碼都是對MethodRabbitListenerEndpoint對象的屬性設置：處理消息的bean、消息處理方法的工廠類、監聽的隊列名。。。。
其中要關注一下setMessageHandlerMethodFactory方法，查看MessageHandlerMethodFactory接口的源碼
public interface MessageHandlerMethodFactory {
?? ?InvocableHandlerMethod createInvocableHandlerMethod(Object bean, Method method);從入?yún)⒑头祷刂悼梢钥闯鰜?lái)，這個工廠的作用就是將spring的bean對象和方法包裝成一個InvocableHandlerMethod對象，也就是我們上面提到的（對象+方法）。
2、通過beanFactory獲取RabbitListenerContainerFactory類的bean。
3、調用RabbitListenerEndpointRegistar的registerEndpoint方法注冊mq消息消費端點。
繼續往下追，看一下RabbitListenerEndpointRegistar的代碼：
public class RabbitListenerEndpointRegistrar implements BeanFactoryAware, InitializingBean {
?? ?// 將整個endpointDescriptors數組進行注冊
?? ?protected void registerAllEndpoints() {
?? ??? ?synchronized (this.endpointDescriptors) {
?? ??? ??? ?for (AmqpListenerEndpointDescriptor descriptor : this.endpointDescriptors) {
?? ??? ??? ??? ?this.endpointRegistry.registerListenerContainer(
?? ??? ??? ??? ??? ??? ?descriptor.endpoint, resolveContainerFactory(descriptor));
?? ??? ??? ?}
?? ??? ??? ?this.startImmediately = true; ?// trigger immediate startup
?? ??? ?}
?? ?}
?? ?
?? ?// 解析得到RabbitListenerContainerFactory
?? ?// 如果AmqpListenerEndpointDescriptor 的containerFactory屬性不為空，直接返回containerFactory
?? ?// 如果為空，嘗試從beanFactory獲取
?? ?private RabbitListenerContainerFactory<?> resolveContainerFactory(AmqpListenerEndpointDescriptor descriptor) {
?? ??? ?if (descriptor.containerFactory != null) {
?? ??? ??? ?return descriptor.containerFactory;
?? ??? ?}
?? ??? ?else if (this.containerFactory != null) {
?? ??? ??? ?return this.containerFactory;
?? ??? ?}
?? ??? ?else if (this.containerFactoryBeanName != null) {
?? ??? ??? ?Assert.state(this.beanFactory != null, "BeanFactory must be set to obtain container factory by bean name");
?? ??? ??? ?this.containerFactory = this.beanFactory.getBean(
?? ??? ??? ??? ??? ?this.containerFactoryBeanName, RabbitListenerContainerFactory.class);
?? ??? ??? ?return this.containerFactory; ?// Consider changing this if live change of the factory is required
?? ??? ?}
?? ??? ?else {
?? ??? ??? ?throw new IllegalStateException("Could not resolve the " +
?? ??? ??? ??? ??? ?RabbitListenerContainerFactory.class.getSimpleName() + " to use for [" +
?? ??? ??? ??? ??? ?descriptor.endpoint + "] no factory was given and no default is set.");
?? ??? ?}
?? ?}
?? ?
?? ?// new一個AmqpListenerEndpointDescriptor對象
?? ?// 如果立即啟動，則調用RabbitListenerEndpointRegistry注冊器來注冊消息監聽
?? ?// 如果不是立即啟動，則添加到endpointDescriptors列表中，后面通過registerAllEndpoints方法統一啟動
?? ?public void registerEndpoint(RabbitListenerEndpoint endpoint, RabbitListenerContainerFactory<?> factory) {
?? ??? ?Assert.notNull(endpoint, "Endpoint must be set");
?? ??? ?Assert.hasText(endpoint.getId(), "Endpoint id must be set");
?? ??? ?// Factory may be null, we defer the resolution right before actually creating the container
?? ??? ?AmqpListenerEndpointDescriptor descriptor = new AmqpListenerEndpointDescriptor(endpoint, factory);
?? ??? ?synchronized (this.endpointDescriptors) {
?? ??? ??? ?if (this.startImmediately) { // Register and start immediately
?? ??? ??? ??? ?this.endpointRegistry.registerListenerContainer(descriptor.endpoint,
?? ??? ??? ??? ??? ??? ?resolveContainerFactory(descriptor), true);
?? ??? ??? ?}
?? ??? ??? ?else {
?? ??? ??? ??? ?this.endpointDescriptors.add(descriptor);
?? ??? ??? ?}
?? ??? ?}
?? ?}
}從上面的代碼可以看出，我們關心的內容，應該是在RabbitListenerEndpointRegistry類的registerListenerContainer方法??！
public class RabbitListenerEndpointRegistry implements DisposableBean, SmartLifecycle, ApplicationContextAware,
?? ??? ?ApplicationListener<ContextRefreshedEvent> {
?? ??? ?// 檢查是否被注冊過，注冊過就不能注冊第二次
?? ??? ?// 調用createListenerContainer創建消息監聽
?? ??? ?// 關于分組消費的，我們不關心
?? ??? ?// 是否立即啟動，是的話，同步調用startIfNecessary方法
?? ??? ?public void registerListenerContainer(RabbitListenerEndpoint endpoint, RabbitListenerContainerFactory<?> factory,
?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?boolean startImmediately) {
?? ??? ?Assert.notNull(endpoint, "Endpoint must not be null");
?? ??? ?Assert.notNull(factory, "Factory must not be null");
?? ??? ?String id = endpoint.getId();
?? ??? ?Assert.hasText(id, "Endpoint id must not be empty");
?? ??? ?synchronized (this.listenerContainers) {
?? ??? ??? ?Assert.state(!this.listenerContainers.containsKey(id),
?? ??? ??? ??? ??? ?"Another endpoint is already registered with id '" + id + "'");
?? ??? ??? ?MessageListenerContainer container = createListenerContainer(endpoint, factory);
?? ??? ??? ?this.listenerContainers.put(id, container);
?? ??? ??? ?if (StringUtils.hasText(endpoint.getGroup()) && this.applicationContext != null) {
?? ??? ??? ??? ?List<MessageListenerContainer> containerGroup;
?? ??? ??? ??? ?if (this.applicationContext.containsBean(endpoint.getGroup())) {
?? ??? ??? ??? ??? ?containerGroup = this.applicationContext.getBean(endpoint.getGroup(), List.class);
?? ??? ??? ??? ?}
?? ??? ??? ??? ?else {
?? ??? ??? ??? ??? ?containerGroup = new ArrayList<MessageListenerContainer>();
?? ??? ??? ??? ??? ?this.applicationContext.getBeanFactory().registerSingleton(endpoint.getGroup(), containerGroup);
?? ??? ??? ??? ?}
?? ??? ??? ??? ?containerGroup.add(container);
?? ??? ??? ?}
?? ??? ??? ?if (startImmediately) {
?? ??? ??? ??? ?startIfNecessary(container);
?? ??? ??? ?}
?? ??? ?}
?? ?// 其實就是調用了RabbitListenerContainerFactory的createListenerContainer生成了一個MessageListenerContainer對象
?? ?protected MessageListenerContainer createListenerContainer(RabbitListenerEndpoint endpoint,
?? ??? ??? ?RabbitListenerContainerFactory<?> factory) {
?? ??? ?MessageListenerContainer listenerContainer = factory.createListenerContainer(endpoint);
?? ??? ?if (listenerContainer instanceof InitializingBean) {
?? ??? ??? ?try {
?? ??? ??? ??? ?((InitializingBean) listenerContainer).afterPropertiesSet();
?? ??? ??? ?}
?? ??? ??? ?catch (Exception ex) {
?? ??? ??? ??? ?throw new BeanInitializationException("Failed to initialize message listener container", ex);
?? ??? ??? ?}
?? ??? ?}
?? ??? ?int containerPhase = listenerContainer.getPhase();
?? ??? ?if (containerPhase < Integer.MAX_VALUE) { ?// a custom phase value
?? ??? ??? ?if (this.phase < Integer.MAX_VALUE && this.phase != containerPhase) {
?? ??? ??? ??? ?throw new IllegalStateException("Encountered phase mismatch between container factory definitions: " +
?? ??? ??? ??? ??? ??? ?this.phase + " vs " + containerPhase);
?? ??? ??? ?}
?? ??? ??? ?this.phase = listenerContainer.getPhase();
?? ??? ?}
?? ??? ?return listenerContainer;
?? ?}
}createListenerContainer方法調用了RabbitListenerContainerFactory接口的createListenerContainer方法創建一個MessageListenerContainer對象。
在這里，如果是通過RabbitAutoConfiguration自動配置的，那么RabbitListenerContainerFactory接口的具體實現類是SimpleRabbitListenerContainerFactory，MessageListenerContainer接口的具體實現類是SimpleMessageListenerContainer。有興趣的話，可以去看下rabbitMq自動配置的幾個類。
RabbitListenerContainerFactory接口的createListenerContainer方法是由AbstractRabbitListenerContainerFactory抽象類實現，代碼如下：
?? ?@Override
?? ?public C createListenerContainer(RabbitListenerEndpoint endpoint) {
?? ??? ?C instance = createContainerInstance();
?? ??? ?if (this.connectionFactory != null) {
?? ??? ??? ?instance.setConnectionFactory(this.connectionFactory);
?? ??? ?}
?? ??? ?if (this.errorHandler != null) {
?? ??? ??? ?instance.setErrorHandler(this.errorHandler);
?? ??? ?}
?? ??? ?if (this.messageConverter != null) {
?? ??? ??? ?instance.setMessageConverter(this.messageConverter);
?? ??? ?}
?? ??? ?if (this.acknowledgeMode != null) {
?? ??? ??? ?instance.setAcknowledgeMode(this.acknowledgeMode);
?? ??? ?}
?? ??? ?if (this.channelTransacted != null) {
?? ??? ??? ?instance.setChannelTransacted(this.channelTransacted);
?? ??? ?}
?? ??? ?if (this.autoStartup != null) {
?? ??? ??? ?instance.setAutoStartup(this.autoStartup);
?? ??? ?}
?? ??? ?if (this.phase != null) {
?? ??? ??? ?instance.setPhase(this.phase);
?? ??? ?}
?? ??? ?instance.setListenerId(endpoint.getId());
?? ??? ?// 最重要的一行?。?！
?? ??? ?endpoint.setupListenerContainer(instance);
?? ??? ?initializeContainer(instance);
?? ??? ?return instance;
?? ?}乍一看，都是對MessageListenerContainer實例的初始化，實際上有一行，相當重要“ endpoint.setupListenerContainer(instance); ”，這一行最終是走到
AbstractRabbitListenerEndpoint.setupListenerContainer
public abstract class AbstractRabbitListenerEndpoint implements RabbitListenerEndpoint, BeanFactoryAware {
?? ?......
?? ?
?? ?// 設置MessageListenerContainer，最重要的就是設置監聽的隊列名稱?。?！
?? ?@Override
?? ?public void setupListenerContainer(MessageListenerContainer listenerContainer) {
?? ??? ?SimpleMessageListenerContainer container = (SimpleMessageListenerContainer) listenerContainer;
?? ??? ?boolean queuesEmpty = getQueues().isEmpty();
?? ??? ?boolean queueNamesEmpty = getQueueNames().isEmpty();
?? ??? ?if (!queuesEmpty && !queueNamesEmpty) {
?? ??? ??? ?throw new IllegalStateException("Queues or queue names must be provided but not both for " + this);
?? ??? ?}
?? ??? ?if (queuesEmpty) {
?? ??? ??? ?Collection<String> names = getQueueNames();
?? ??? ??? ?container.setQueueNames(names.toArray(new String[names.size()]));
?? ??? ?}
?? ??? ?else {
?? ??? ??? ?Collection<Queue> instances = getQueues();
?? ??? ??? ?container.setQueues(instances.toArray(new Queue[instances.size()]));
?? ??? ?}
?? ??? ?container.setExclusive(isExclusive());
?? ??? ?if (getPriority() != null) {
?? ??? ??? ?Map<String, Object> args = new HashMap<String, Object>();
?? ??? ??? ?args.put("x-priority", getPriority());
?? ??? ??? ?container.setConsumerArguments(args);
?? ??? ?}
?? ??? ?if (getAdmin() != null) {
?? ??? ??? ?container.setRabbitAdmin(getAdmin());
?? ??? ?}
?? ??? ?setupMessageListener(listenerContainer);
?? ?}
?? ?
?? ?// 創建MessageListener
?? ?protected abstract MessageListener createMessageListener(MessageListenerContainer container);
?? ?// 創建MessageListener，設置到MessageListenerContainer 里
?? ?private void setupMessageListener(MessageListenerContainer container) {
?? ??? ?MessageListener messageListener = createMessageListener(container);
?? ??? ?Assert.state(messageListener != null, "Endpoint [" + this + "] must provide a non null message listener");
?? ??? ?container.setupMessageListener(messageListener);
?? ?}
?? ?......
}用@RabbitLinstener注解的方法，使用的endpoint是MethodRabbitListenerEndpoint繼承自AbstractRabbitListenerEndpoint，所以看看AbstractRabbitListenerEndpoint的createMessageListener方法
public class MethodRabbitListenerEndpoint extends AbstractRabbitListenerEndpoint {
?? ?......
?? ?@Override
?? ?protected MessagingMessageListenerAdapter createMessageListener(MessageListenerContainer container) {
?? ??? ?Assert.state(this.messageHandlerMethodFactory != null,
?? ??? ??? ??? ?"Could not create message listener - MessageHandlerMethodFactory not set");
?? ??? ?MessagingMessageListenerAdapter messageListener = createMessageListenerInstance();
?? ??? ?messageListener.setHandlerMethod(configureListenerAdapter(messageListener));
?? ??? ?String replyToAddress = getDefaultReplyToAddress();
?? ??? ?if (replyToAddress != null) {
?? ??? ??? ?messageListener.setResponseAddress(replyToAddress);
?? ??? ?}
?? ??? ?MessageConverter messageConverter = container.getMessageConverter();
?? ??? ?if (messageConverter != null) {
?? ??? ??? ?messageListener.setMessageConverter(messageConverter);
?? ??? ?}
?? ??? ?if (getBeanResolver() != null) {
?? ??? ??? ?messageListener.setBeanResolver(getBeanResolver());
?? ??? ?}
?? ??? ?return messageListener;
?? ?}
?? ?protected MessagingMessageListenerAdapter createMessageListenerInstance() {
?? ??? ?return new MessagingMessageListenerAdapter(this.bean, this.method);
?? ?}
?? ?
?? ?......
}從上面代碼可以看出，createMessageListener方法返回了一個MessagingMessageListenerAdapter實例，MessagingMessageListenerAdapter實現了MessageListener接口
到這里，我們就能得出一些結論：
1、有@RabbitListener注解的方法，會生成MethodRabbitListenerEndpoint對象
2、通過MethodRabbitListenerEndpoint對象和SimpleRabbitListenerContainerFactory工廠bean，生成SimpleMessageListenerContainer對象
3、SimpleMessageListenerContainer對象保存了要監聽的隊列名，創建了用于處理消息的MessagingMessageListenerAdapter實例
4、MessagingMessageListenerAdapter持有@RabbitListener注解的對象和方法，起到一個適配器的作用
SimpleMessageListenerContainer是相當重要的一個類，，包裝了整個mq消息消費需要的信息：
1、保存了要監聽的隊列名，啟動的時候，根據隊列名創建從服務器拉取消息的consumer——BlockingQueueConsumer
2、創建了一個MessagingMessageListenerAdapter對象，當consumer從服務器拿到消息后，由MessagingMessageListenerAdapter進行處理
3、誰來做數據轉換？
是MessagingMessageListenerAdapter，有興趣的，可以看看MessagingMessageListenerAdapter轉換參數的源碼~~
總結
以上為個人經驗，希望能給大家一個參考，也希望大家多多支持腳本之家。
相關文章
java并發學習之BlockingQueue實現生產者消費者詳解
這篇文章主要介紹了java并發學習之BlockingQueue實現生產者消費者詳解，具有一定參考價值，需要的朋友可以了解下。2017-11-11
很多朋友不清楚在mybatis可以使用各種腳本語言來定義Mapper文件里面的動態SQL；目前mybatis支持的腳本語言有XML（默認的）；Velocity和Freemarker三種。下面通過本文給大家介紹Mybatis velocity腳本的使用，一起看看吧2016-11-11
Mybatis如何自動生成數據庫表的實體類
這篇文章主要介紹了Mybatis自動生成數據庫表的實體類的操作，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2021-06-06
SpringBoot使用Hibernate攔截器實現時間自動注入的操作代碼
這篇文章主要介紹了SpringBoot使用Hibernate攔截器實現時間自動注入的操作代碼,主要包括hibernate攔截器的相關知識，結合實例代碼給大家講解的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-10-10
Java框架解說之BIO NIO AIO不同IO模型演進之路
網上很多IO資料，對新手來說，越看越暈。根據自己的理解，總結對比了一下BIO、NIO、AIO，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-10-10
Liquibase結合SpringBoot使用實現數據庫管理功能
Liquibase 是一個強大的數據庫管理工具,它幫助你通過自動化管理數據庫的變更、版本控制、和回滾,簡化了開發中的數據庫遷移工作,這篇文章主要介紹了Liquibase結合SpringBoot使用實現數據庫管理,需要的朋友可以參考下2024-12-12
java循環結構、數組的使用小結
這篇文章主要介紹了java循環結構、數組的使用小結，本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值,需要的朋友可以參考下2021-09-09
Struts2學習筆記(9)-Result配置全局結果集
這篇文章主要介紹Struts2中使用Result配置全局結果集的方法，希望能給大家做一個參考。2016-06-06
Springboot使用JustAuth實現各種第三方登陸
本文主要介紹了Springboot使用JustAuth實現各種第三方登陸，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2023-07-07
Java數據結構之?dāng)?shù)組(動力節點之Java學院整理)
這篇文章主要介紹了Java數據結構之?dāng)?shù)組(動力節點之Java學院整理)的相關資料，包括創建和內存分配，數組封裝后的使用等，需要的朋友參考下吧2017-04-04