利用Qt制作簡單的日期選擇界面

更新時間：2023年03月08日 10:37:44 作者：TGTSTTG

Qt自帶的日期選擇控件過于丑陋與難用，所以但凡有點小想法的人都會做一個全新的日歷。這篇文章就來利用Qt制作一個簡單的日期選擇界面，感興趣的可以了解一下

Qt自帶的日期選擇控件過于丑陋與難用，所以但凡有點小想法的人都會做一個全新的日歷。

這就是本人制作的日歷的截圖：

制作日歷的核心難點是填充日歷。以下為我的填充日歷函數：

void STCalandarWidget::FillCalandar()
{
    QDate firstDay;
    firstDay.setDate(currentDate.year(), currentDate.month(), 1);
    int firstnum = firstDay.dayOfWeek();//這個月的第一天是星期幾
    qDebug() << firstnum;
    QDate firstDayOfMonth = firstDay.addDays(-(firstnum - 1));//日歷的第一天實際的日期
    for (int i = 0; i < 42; i++) {
        if (i < firstnum-1 || (firstDayOfMonth.month() != currentDate.month())) {//理論上只需要后半邊的條件就行
            datewidgets[i]->SetDate(firstDayOfMonth.year(), firstDayOfMonth.month(), firstDayOfMonth.day(), false);
        }
        else {
            datewidgets[i]->SetDate(firstDayOfMonth.year(), firstDayOfMonth.month(), firstDayOfMonth.day(), true);
        }
        firstDayOfMonth = firstDayOfMonth.addDays(1);
    }
}

鄙人制作的日歷使用起來非常簡單，僅需將兩個頭文件和兩個CPP加入到工程中，使用時的代碼如下：

  calandar_ = new STCalandarWidget(this);
   connect(calandar_, SIGNAL(DateSelectSignal(QDate)), this, SLOT(HaveDateChose(QDate)));
   calandar_->exec();

當日歷的日期被選擇時，會發送DateSelectSignal信號，調用者寫一個槽函數接受一下就可以：

void MyClass::HaveDateChose(QDate c_dates)
{
    ui.dateedit->setDate(c_dates);
    calandar_->accepted();
    calandar_->deleteLater();
}

具體日歷的實現如下，當然不想登錄的同志們可以通過百度網盤進行下載：

百度網盤鏈接：

鏈接: https://pan.baidu.com/s/1x8EMfKYP3t04ssG-UpoGMQ 提取碼: vwqw

STDateWidget.h:

#pragma once
#include <qwidget.h>
#include <QDate>
#include <QPainter>
class STDateWidget :
    public QWidget
{
    Q_OBJECT
public:
    enum Direction {
        DIR_TOP = 0,
        DIR_BOTTOM,
        DIR_LEFT,
        DIR_RIGHT
    };
 
    STDateWidget(QWidget* parrent = nullptr);
    ~STDateWidget();
    void SetDate(int year, int month, int day, bool isThisMonth);
    QDate GetCurrentDate();
    void AddNeighbor(STDateWidget* wid,Direction dir);
    void HaveGoodNeighbor(Direction dir);
    void DeleteGoodNgithbor(Direction dir);
 
 
private:
    bool isHasGoodNeighbor;
    bool canSelect;
    bool isMoveIn;
    Direction direction;
    QDate currentDate;
    QList<STDateWidget*> neighbors;
    QList<Direction>directions;
protected:
    void mouseReleaseEvent(QMouseEvent* event) ;
    void enterEvent(QEvent* event);
    void leaveEvent(QEvent* event);
    void paintEvent(QPaintEvent* event);
 
signals:
    void updateCurrentDate(QDate date);
};

STDateWidget.cpp

#include "STDateWidget.h"
#include <QMouseEvent>
#include <QLinearGradient>
STDateWidget::STDateWidget(QWidget* parrent /* = nullptr */) :QWidget(parrent)
{
    isMoveIn = false;
    //qDebug() << "make";
    //this->setGeometry(0, 0, 180, 160);
    isHasGoodNeighbor = false;
    //this->setStyleSheet("background-color:red");
}
STDateWidget::~STDateWidget()
{
}
 
void STDateWidget::SetDate(int year, int month, int day, bool isThisMonth)
{
    currentDate.setDate(year, month, day);
    canSelect = isThisMonth;
    
    update();
}
 
QDate STDateWidget::GetCurrentDate()
{
    return currentDate;
}
 
void STDateWidget::AddNeighbor(STDateWidget* wid, Direction dir)
{
    neighbors.append(wid);
    directions.append(dir);
}
 
void STDateWidget::HaveGoodNeighbor(Direction dir)
{
    isHasGoodNeighbor = true;
    direction = dir;
    update();
}
 
void STDateWidget::DeleteGoodNgithbor(Direction dir)
{
    isHasGoodNeighbor = false;
    direction = dir;
    update();
}
 
void STDateWidget::mouseReleaseEvent(QMouseEvent* event)
{
    if (canSelect) {
        emit updateCurrentDate(currentDate);
    }
    
}
 
void STDateWidget::enterEvent(QEvent* event)
{
    isMoveIn = true;
    for (int i = 0; i < neighbors.count(); i++) {
        neighbors[i]->HaveGoodNeighbor(directions[i]);
    }
    update();
}
 
void STDateWidget::leaveEvent(QEvent* event)
{
    isMoveIn = false;
    for (int i = 0; i < neighbors.count(); i++) {
        neighbors[i]->DeleteGoodNgithbor(directions[i]);
    }
    update();
}
 
void STDateWidget::paintEvent(QPaintEvent* event)
{
    //return;
    QPainter painter(this);
    painter.save();
    int xx = 1;
    int yy = 1;
    int ww = this->geometry().width();
    int hh = this->geometry().height();
    if (isMoveIn) {
        QPen pen;
        pen.setBrush(QColor(0, 200, 250, 200));
        pen.setWidth(2);
        painter.setPen(pen);
        painter.drawRect(xx +2 ,yy +2,ww-4,hh-4);
    }
    else {
        if (isHasGoodNeighbor)
        {
            QPen pen;
            pen.setBrush(QColor(255, 255, 255, 0));
            pen.setWidth(0);
            painter.setPen(pen);
            QLinearGradient line_left_top2bottom(xx + 2, yy + 2, xx + 2, yy + hh - 6);//左。
            line_left_top2bottom.setColorAt(0.0, Qt::white);
            line_left_top2bottom.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_left_bottom2top( xx + 2, yy + hh - 6, xx + 2, yy + 2);//左。
            line_left_bottom2top.setColorAt(0.0, Qt::white);
            line_left_bottom2top.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_right_top2bottpm(xx + ww - 6, yy + 2, xx + ww - 6, yy + hh - 6);
            line_right_top2bottpm.setColorAt(0.0, Qt::white);
            line_right_top2bottpm.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_right_bottom2top(xx + ww - 6, yy + hh - 6, xx + ww - 6, yy + 2);
            line_right_bottom2top.setColorAt(0.0, Qt::white);
            line_right_bottom2top.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_top_left2right(xx + 2, yy + 2, xx + ww - 6, yy + 2);
            line_top_left2right.setColorAt(0.0, Qt::white);
            line_top_left2right.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_top_right2left(xx + ww - 6, yy + 2, xx + 2, yy + 2);
            line_top_right2left.setColorAt(0.0, Qt::white);
            line_top_right2left.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_bottom_left2right(xx + 2, yy + hh - 6, xx + ww - 6, yy + hh - 6);
            line_bottom_left2right.setColorAt(0.0, Qt::white);
            line_bottom_left2right.setColorAt(1.0, QColor(0, 200, 250, 100));
            QLinearGradient line_bottom_right2left(xx + ww - 6, yy + hh - 6, xx + 2, yy + hh - 6);
            line_bottom_right2left.setColorAt(0.0, Qt::white);
            line_bottom_right2left.setColorAt(1.0, QColor(0, 200, 250, 100));
            QRect rectTop(xx + 2, yy + 2, ww - 6, 2);
            QRect rectBottom(xx + 2, yy + hh - 4, ww - 4, 2);
            QRect rectLeft(xx + 2, yy + 2, 2, hh - 6);
            QRect rectRight(xx + ww - 4, yy + 2, 2, hh - 6);
            switch (direction)
            {
            case STDateWidget::DIR_TOP:
                painter.setBrush(QColor(0, 200, 250, 100));
                painter.drawRect(rectBottom);
                painter.setBrush(line_left_top2bottom);
                painter.drawRect(rectLeft);
                painter.setBrush(line_right_top2bottpm);
                painter.drawRect(rectRight);               
                break;
            case STDateWidget::DIR_BOTTOM:
                painter.setBrush(QColor(0, 200, 250, 100));
                painter.drawRect(rectTop);
                painter.setBrush(line_left_bottom2top);
                painter.drawRect(rectLeft);
                painter.setBrush(line_right_bottom2top);
                painter.drawRect(rectRight);
                break;
            case STDateWidget::DIR_LEFT:
                painter.setBrush(QColor(0, 200, 250, 100));
                painter.drawRect(rectRight);
                painter.setBrush(line_top_left2right);
                painter.drawRect(rectTop);
                painter.setBrush(line_bottom_left2right);
                painter.drawRect(rectBottom);
                break;
            case STDateWidget::DIR_RIGHT:
                painter.setBrush(QColor(0, 200, 250, 100));
                painter.drawRect(rectLeft);
                painter.setBrush(line_top_right2left);
                painter.drawRect(rectTop);
                painter.setBrush(line_bottom_right2left);
                painter.drawRect(rectBottom);
                break;
            default:
                break;
            }
        }
        /*   QPen pen;
           pen.setBrush(QColor(255, 255, 255, 255));
           pen.setWidth(2);
           painter.setPen(pen);
           painter.drawRect(this->geometry());*/
    }
    painter.restore();
    if (canSelect) {
        QPen pen2;
        pen2.setBrush(QColor(0, 0, 0));
        painter.setPen(pen2);
        painter.drawText(ww/2 - 10, hh/2, QString::number(currentDate.day()));
    }
    else {
        QPen pen2;
        pen2.setBrush(QColor(200, 200, 200));
        painter.setPen(pen2);
        painter.drawText(ww/2- 10, hh/2, QString::number(currentDate.day()));
    }
    //painter
}

STCalandarWidget.h

#pragma once
#include <qdialog.h>
#include "STDateWidget.h"
#include <QLabel>
#include <QPushButton>
class STCalandarWidget :
    public QDialog
{
    Q_OBJECT
public:
    STCalandarWidget(QWidget* parrent = nullptr);
    ~STCalandarWidget();
    void SetCurrentDate(int year, int month, int day);
    QDate GetCurrentDate();
private:
    void FillCalandar();
    void initLabels();
    void initCalandar();
    void init();
    QString getFormatMonth();
private:
    QLabel *weeklabels[7];
    STDateWidget *datewidgets[42];
    QPushButton *lastYearButton;
    QPushButton *lastMonthButton;
    QPushButton *nextMonthButton;
    QPushButton *nextYearButton;
    QDate currentDate;
    QLabel *cdlabel;
public slots:
    void HaveDateSelect(QDate date);
    void JumpLastYear();
    void JumpLastMonth();
    void JumpNextMonth();
    void JumpNextYear();
 
signals:
    void DateSelectSignal(QDate date);
};

STCalandarWidget.cpp:

#include "STCalandarWidget.h"
#include <QDebug>
STCalandarWidget::STCalandarWidget(QWidget* parrent /* = nullptr */) :QDialog(parrent) {
    this->setStyleSheet(QString::fromLocal8Bit("font:15px 等線; background-color:rgb(250,250,250)"));
    this->setMinimumSize(580, 450);
    this->setMaximumSize(580, 450);
    Qt::WindowFlags flags = Qt::Dialog;
    flags |= Qt::WindowCloseButtonHint;
    setWindowFlags(flags);
    init();
}
 
STCalandarWidget::~STCalandarWidget()
{
}
 
void STCalandarWidget::SetCurrentDate(int year, int month, int day)
{
    currentDate.setDate(year, month, day);
}
 
QDate STCalandarWidget::GetCurrentDate()
{
    return currentDate;
}
 
void STCalandarWidget::FillCalandar()
{
    QDate firstDay;
    firstDay.setDate(currentDate.year(), currentDate.month(), 1);
    int firstnum = firstDay.dayOfWeek();
    qDebug() << firstnum;
    QDate firstDayOfMonth = firstDay.addDays(-(firstnum - 1));
    for (int i = 0; i < 42; i++) {
        if (i < firstnum-1 || (firstDayOfMonth.month() != currentDate.month())) {
            datewidgets[i]->SetDate(firstDayOfMonth.year(), firstDayOfMonth.month(), firstDayOfMonth.day(), false);
        }
        else {
            datewidgets[i]->SetDate(firstDayOfMonth.year(), firstDayOfMonth.month(), firstDayOfMonth.day(), true);
        }
        firstDayOfMonth = firstDayOfMonth.addDays(1);
    }
}
 
void STCalandarWidget::initLabels()
{
    for (int i = 0; i < 7; i++) {
        weeklabels[i] = new QLabel(this);
        weeklabels[i]->setGeometry(35 + i*80, 50, 80, 40);
    }
    weeklabels[0]->setText("Mon");
    weeklabels[1]->setText("Tue");
    weeklabels[2]->setText("Wed");
    weeklabels[3]->setText("Thu");
    weeklabels[4]->setText("Fri");
    weeklabels[5]->setText("Sat");
    weeklabels[6]->setText("Sun");
}
 
void STCalandarWidget::initCalandar()
{
    for (int i = 0; i < 42; i++) {
        datewidgets[i] = new STDateWidget(this);
        datewidgets[i]->setGeometry(10 + i % 7 * 80, 80 + i / 7 * 60, 80, 60);
        connect(datewidgets[i], SIGNAL(updateCurrentDate(QDate)), this, SLOT(HaveDateSelect(QDate)));
    }
    for (int i = 0; i < 42; i++) {
        if (i / 7 == 0 ) {//第一排
            if (i % 7 == 0) {//第一個
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
            }
            else if (i % 7 == 6) {//最后一個
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            else {
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            datewidgets[i]->AddNeighbor(datewidgets[i + 7], STDateWidget::DIR_BOTTOM);
        }
        else if (i / 7 == 5) {//最后一排
            if (i % 7 == 0) {//第一個
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
            }
            else if (i % 7 == 6) {//最后一個
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            else {
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            datewidgets[i]->AddNeighbor(datewidgets[i - 7], STDateWidget::DIR_TOP);
        }
        else
        {
            if (i % 7 == 0) {//第一個
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
            }
            else if (i % 7 == 6) {//最后一個
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            else {
                datewidgets[i]->AddNeighbor(datewidgets[i + 1], STDateWidget::DIR_RIGHT);
                datewidgets[i]->AddNeighbor(datewidgets[i - 1], STDateWidget::DIR_LEFT);
            }
            datewidgets[i]->AddNeighbor(datewidgets[i - 7], STDateWidget::DIR_TOP);
            datewidgets[i]->AddNeighbor(datewidgets[i + 7], STDateWidget::DIR_BOTTOM);
        }
    }
    FillCalandar();
}
 
void STCalandarWidget::init()
{
    currentDate = QDate::currentDate();
    lastYearButton = new QPushButton(this);
    lastYearButton->setGeometry(10, 10, 100, 30);
    lastYearButton->setText("<<");
 
    lastMonthButton = new QPushButton(this);
    lastMonthButton->setGeometry(120, 10, 100, 30);
    lastMonthButton->setText("<");
 
    cdlabel = new QLabel(this);
    cdlabel->setGeometry(255, 10, 100, 40);
    cdlabel->setText(getFormatMonth());
 
    nextMonthButton = new QPushButton(this);
    nextMonthButton->setGeometry(360, 10, 100, 30);
    nextMonthButton->setText(">");
 
    nextYearButton = new QPushButton(this);
    nextYearButton->setGeometry(470, 10, 100, 30);
    nextYearButton->setText(">>");
 
    connect(lastYearButton, SIGNAL(clicked()), this, SLOT(JumpLastYear()));
    connect(lastMonthButton, SIGNAL(clicked()), this, SLOT(JumpLastMonth()));
    connect(nextMonthButton, SIGNAL(clicked()), this, SLOT(JumpNextMonth()));
    connect(nextYearButton, SIGNAL(clicked()), this, SLOT(JumpNextYear()));
    initLabels();
    initCalandar();
}
QString STCalandarWidget::getFormatMonth()
{
    QString ans = "";
    ans += QString::number(currentDate.year());
    ans += QString::fromLocal8Bit("年");
    ans += QString::number(currentDate.month());
    ans += QString::fromLocal8Bit("月");
    return ans;
}
void STCalandarWidget::HaveDateSelect(QDate date)
{
    qDebug() << date;
    emit DateSelectSignal(date);
}
void STCalandarWidget::JumpLastYear()
{
    currentDate = currentDate.addYears(-1);
    FillCalandar();
    cdlabel->setText(getFormatMonth());
}
 
void STCalandarWidget::JumpLastMonth()
{
    currentDate = currentDate.addMonths(-1);
    FillCalandar();
    cdlabel->setText(getFormatMonth());
}
 
void STCalandarWidget::JumpNextMonth()
{
    currentDate = currentDate.addMonths(1);
    FillCalandar();
    cdlabel->setText(getFormatMonth());
}
 
void STCalandarWidget::JumpNextYear()
{
    currentDate = currentDate.addYears(1);
    FillCalandar();
    cdlabel->setText(getFormatMonth());
}

到此這篇關于利用Qt制作簡單的日期選擇界面的文章就介紹到這了,更多相關Qt日期選擇界面內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: