Qt利用QNetwork實現上傳數據的示例代碼
更新時間：2023年02月24日 08:32:50 作者：歐特克_Glodon
這篇文章主要為大家詳細介紹了Qt如何利用QNetwork實現上傳數據的 功能，文中的示例代碼講解詳細，感興趣的小伙伴可以跟隨小編一起學習一下
1、利用Qt提供的類實現向服務器發送post和get請求
#include <QCoreApplication>
#include <QNetworkAccessManager>
#include <QNetworkRequest>
#include <QNetworkReply>
#include <QJsonArray>
#include <QJsonDocument>
#include <QJsonObject>
#include <QJsonParseError>
#include <QJsonValue>
#include <QString>
#include <QDebug>
#include <QFile>
#include <QDateTime>
#include <QDir>
#include <QThread>
#pragma execution_character_set("utf-8")
void sendPostRequest()
{
QNetworkAccessManager *m_pHttpMgr = new QNetworkAccessManager();
//設置url
QString url = "http://localhost:80/post";
//設置頭信息
QNetworkRequest requestInfo;
requestInfo.setUrl(QUrl(url));
requestInfo.setHeader(QNetworkRequest::ContentTypeHeader,QVariant("application/json"));
//requestInfo.setRawHeader("Content-Type","application/json");//服務器要求的數據頭部
//requestInfo.setRawHeader("Accept","text/json,*/*;q=0.5");//服務器要求的數據頭部
//發送數據
QJsonObject regionObject;
regionObject.insert("name","333");
regionObject.insert("height", "2");
regionObject.insert("dir", "0");
QJsonArray pointAry;
pointAry.append(0.8);
pointAry.append(1.0);
pointAry.append(0.0);
pointAry.append(1.8);
pointAry.append(2.0);
pointAry.append(0.0);
regionObject.insert("points", QJsonValue(pointAry));
QJsonObject jsonObject;
jsonObject.insert("Code", "asss");
jsonObject.insert("parentId", 0);
jsonObject.insert("depot", "past");
jsonObject.insert("region", QJsonValue(regionObject));
QJsonDocument jsonDoc;
jsonDoc.setObject(jsonObject);
QByteArray qByteHttpData = jsonDoc.toJson();
QNetworkReply *reply = m_pHttpMgr->post(requestInfo, qByteHttpData);
//添加事件循環機制，返回后再運行后面的
QEventLoop eventLoop;
QObject::connect(reply, SIGNAL(finished()), &eventLoop, SLOT(quit()));
eventLoop.exec(); //block until finish
//錯誤處理
if (reply->error() != QNetworkReply::NoError)
{
qDebug()<<"request protobufHttp handle errors here";
QVariant statusCodeV = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
//statusCodeV是HTTP服務器的相應碼，reply->error()是Qt定義的錯誤碼，可以參考QT的文檔
qDebug( "request protobufHttp found error ....code: %d %d\n", statusCodeV.toInt(), (int)reply->error());
qDebug(qPrintable(reply->errorString()));
}
//請求收到的結果
QByteArray responseByte = reply->readAll();
QString strRes = responseByte;
qDebug() << "Post:" << strRes;
}
void sendGetRequest()
{
QNetworkAccessManager *m_pHttpMgr = new QNetworkAccessManager();
//設置url
QString url = "http://localhost:80/Get;
QNetworkRequest requestInfo;
requestInfo.setUrl(QUrl(url));
//添加事件循環機制，返回后再運行后面的
QEventLoop eventLoop;
QNetworkReply *reply = m_pHttpMgr->get(requestInfo);
QObject::connect(reply, SIGNAL(finished()), &eventLoop, SLOT(quit()));
eventLoop.exec(); //block until finish
//錯誤處理
if (reply->error() != QNetworkReply::NoError)
{
qDebug()<<"request protobufHttp handle errors here";
QVariant statusCodeV = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
//statusCodeV是HTTP服務器的相應碼，reply->error()是Qt定義的錯誤碼，可以參考QT的文檔
qDebug( "request protobufHttp found error ....code: %d %d\n", statusCodeV.toInt(), (int)reply->error());
qDebug(qPrintable(reply->errorString()));
}
//請求返回的結果
QByteArray responseByte = reply->readAll();
QString strRes = responseByte;
qDebug() << "Get:" << strRes;
QFile file(QDir::currentPath() + "/myResponde.json");
if(!file.open(QIODevice::ReadWrite))
{
qDebug() << "File open error";
}
file.write(responseByte);
file.close();
}
int main(int argc, char *argv[])
{
QCoreApplication a(argc, argv);
sendPostRequest();
//sendGetRequest();
return a.exec();
}
2、實現文件上傳
QT += core gui QT += network greaterThan(QT_MAJOR_VERSION, 4): QT += widgets CONFIG += c++11
Qnetworkutils.h 頭文件
#ifndef QNETWORKUTILS_H
#define QNETWORKUTILS_H
#include <iostream>
#include <QString>
#include <QNetworkRequest>
using namespace std;
namespace QNetWorkUtils
{
// http請求數據
struct HttpRequestData
{
HttpRequestData()
{
strServer = "127.0.0.1";
nPort = 8082;
strUrl = "";
}
// 重置數據
void Reset()
{
strServer = "127.0.0.1";
nPort = 8082;
strUrl = "";
bytePostData.clear();
mapHeaders.clear();
}
QString strServer;
int nPort;
QString strUrl;
QByteArray bytePostData;
std::map<QNetworkRequest::KnownHeaders, QVariant> mapHeaders;
};
class CMultiPartItem
{
public:
CMultiPartItem();
// 該part為一個字符串，可以指定ContentType和ExContentDisposition
CMultiPartItem(const QString& strName, const QString& strValue,
const QString& strContentType = "",
const QString& strExContentDisposition = "");
// 該part為一個二進制塊，可以指定ContentType（如“image/png”，可省略）和ExContentDisposition（如“filename="123.png"”，必須）
CMultiPartItem(const QString& strName, void* pData, int nLen,
const QString& strContentType = "",
const QString& strExContentDisposition = "");
QString m_sName;
QString m_sValue;
void* m_pData;
int m_nDataLen;
QString m_sContentType;
QString m_sExContentDisposition;
};
typedef std::vector<CMultiPartItem> CMultiPartDatas;
//************************************
// 方法: 發送Get請求
// 返回值: bool
// 參數: const HttpRequestData & data 請求數據
// 參數: QByteArray & respData 返回響應數據
// 參數: int nTimeoutmsec 請求超時毫秒
//************************************
bool HttpGet(
const HttpRequestData& data,
QByteArray& respData,
int nTimeoutmsec = 30000,
QString errMsg = QString(),
int* pStatuCode = nullptr);
//************************************
// 方法: 發送Post請求
// 返回值: bool
// 參數: const HttpRequestData & data 請求數據
// 參數: QByteArray & respData 返回響應數據
// 參數: int nTimeoutmsec 請求超時毫秒
//************************************
bool HttpPost(const HttpRequestData& data,
QByteArray& respData,
QString& errMsg,
int nTimeoutmsec = 30000);
//************************************
// 方法: Multipart 數據post上傳
// 返回值: bool
// 參數: const QString& strURL 請求URL
// 參數: const CMultiPartDatas& multiPartDatas 多部數據集合
// 參數: QByteArray & respData 返回響應數據
// 參數: int nTimeoutmsec
bool UploadMultipartData(
const QString& strURL,
const CMultiPartDatas& multiPartDatas,
QByteArray& respData,
QString& errMsg,
int nTimeoutmsec = 30000);
bool UploadMultipartData(
const HttpRequestData& data,
const CMultiPartDatas& multiPartDatas,
QByteArray& respData,
QString& errMsg,
int nTimeoutmsec = 30000);
}
#endif // QNETWORKUTILS_H
Qnetworkutils.cpp 源文件
#include "networkutils.h"
#include <QNetworkRequest>
#include <QNetworkAccessManager>
#include <QNetworkReply>
#include <QHttpMultiPart>
#include <QEventLoop>
#include <QTimer>
namespace QNetWorkUtils
{
CMultiPartItem::CMultiPartItem() :
m_pData(nullptr),
m_nDataLen(0)
{
}
CMultiPartItem::CMultiPartItem(const QString& strName, const QString& strValue,
const QString& strContentType /*= ""*/, const QString& strExContentDisposition /*= ""*/)
{
m_pData = nullptr;
m_nDataLen = 0;
m_sName = strName;
m_sValue = strValue;
m_sContentType = strContentType;
m_sExContentDisposition = strExContentDisposition;
}
CMultiPartItem::CMultiPartItem(const QString& strName, void* pData, int nLen,
const QString& strContentType /*= ""*/, const QString& strExContentDisposition /*= ""*/)
{
m_pData = pData;
m_nDataLen = nLen;
m_sName = strName;
m_sContentType = strContentType;
m_sExContentDisposition = strExContentDisposition;
}
//
bool HttpGet(
const HttpRequestData& data,
QByteArray& respData,
int nTimeoutmsec /*= 30000*/,
QString& errMsg,
int* pStatuCode /*= nullptr*/)
{
// Assemble Url
QString strUrl = data.strUrl;
if (!data.strServer.isEmpty())
strUrl = data.strServer + ":" + QString::number(data.nPort) + "/" + data.strUrl;
const QUrl url = QUrl::fromUserInput(strUrl);
// Send Get Requeset
QNetworkRequest request(url);
for (auto iter = data.mapHeaders.begin(); iter != data.mapHeaders.end(); iter++)
{
request.setHeader(iter->first, iter->second);
}
QNetworkAccessManager qNetAccessManager;
QNetworkReply* reply = qNetAccessManager.get(request);
if (reply == nullptr)
return false;
// Set time out
QTimer timer;
timer.setInterval(nTimeoutmsec); // 設置超時時間 30 秒
timer.setSingleShot(true); // 單次觸發
// Set Loop Event
QEventLoop eventLoop;
QObject::connect(&timer, &QTimer::timeout, &eventLoop, &QEventLoop::quit);
QObject::connect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
timer.start();
int eRes = eventLoop.exec(QEventLoop::ExcludeUserInputEvents);
bool bResult = false;
if (timer.isActive())
{
timer.stop();
QNetworkReply::NetworkError replyError = reply->error();
QVariant variant = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
int nStatusCode = variant.toInt();
if (nullptr != pStatuCode)
{
*pStatuCode = nStatusCode;
}
if (replyError != QNetworkReply::NoError)
{
errMsg = reply->errorString();
qDebug() << "Error String : " << errMsg << "\n";
}
else
{
if (nStatusCode == 200)
{
// Accept Response
respData = reply->readAll();
bResult = true;
}
else
{
bResult = false;
}
}
}
else
{
QObject::disconnect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
reply->abort();
qDebug() << strUrl << ":Timeout\n";
}
reply->deleteLater();
reply = nullptr;
return bResult;
}
bool HttpPost(const HttpRequestData &data, QByteArray &respData, QString &errMsg, int nTimeoutmsec)
{
// Assemble Url
QString strUrl = data.strUrl;
if (!data.strServer.isEmpty())
strUrl = data.strServer + ":" + QString::number(data.nPort) + "/" + data.strUrl;
const QUrl url = QUrl::fromUserInput(strUrl);
// Send Post Requeset
QNetworkRequest request(url);
for (auto iter = data.mapHeaders.begin(); iter != data.mapHeaders.end(); iter++)
{
request.setHeader(iter->first, iter->second);
}
QNetworkAccessManager qNetAccessManager;
QNetworkReply* reply = qNetAccessManager.post(request, data.bytePostData);
if (reply == nullptr)
return false;
// Set time out
QTimer timer;
timer.setInterval(nTimeoutmsec); // 設置超時時間 30 秒
timer.setSingleShot(true); // 單次觸發
// Set Loop Event
QEventLoop eventLoop;
QObject::connect(&timer, &QTimer::timeout, &eventLoop, &QEventLoop::quit);
QObject::connect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
timer.start();
eventLoop.exec(QEventLoop::ExcludeUserInputEvents);
bool bResult = false;
if (timer.isActive())
{
timer.stop();
QNetworkReply::NetworkError replyError = reply->error();
if (replyError != QNetworkReply::NoError)
{
errMsg = reply->errorString();
qDebug() << "Error String : " << reply->errorString() << "\n";
}
else
{
QVariant variant = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
int nStatusCode = variant.toInt();
if (nStatusCode == 200)
{
// Accept Response
respData = reply->readAll();
bResult = true;
}
}
}
else
{
QObject::disconnect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
reply->abort();
errMsg = (strUrl + ":Timeout\n");
qDebug() << strUrl << ":Timeout\n";
}
reply->deleteLater();
reply = nullptr;
return bResult;
}
bool UploadMultipartData(const HttpRequestData &data, const CMultiPartDatas &multiPartDatas, QByteArray &respData, QString &errMsg, int nTimeoutmsec)
{
QString strUrl = data.strUrl;
if (!data.strServer.isEmpty())
strUrl = data.strServer + ":" + QString::number(data.nPort) + "/" + data.strUrl;
const QUrl url = QUrl::fromUserInput(strUrl);
// 創建網絡請求
QNetworkRequest request;
request.setUrl(url);
QHttpMultiPart httpMultiPart(QHttpMultiPart::FormDataType);
// 解決Qt自動解析MultiPart得到boundary=帶雙引號問題
for (auto iter = data.mapHeaders.begin(); iter != data.mapHeaders.end(); iter++)
{
request.setHeader(iter->first, iter->second);
}
request.setHeader(QNetworkRequest::ContentTypeHeader, "multipart/form-data;boundary=" + httpMultiPart.boundary());
FOR_EACH(itemPart, multiPartDatas)
{
QHttpPart httpPart;
{
QString strContentDisposition = QString("form-data; name=\"%1\"%2").arg(itemPart.m_sName)
.arg(itemPart.m_sExContentDisposition.isEmpty() ? "" : "; " + itemPart.m_sExContentDisposition);
httpPart.setHeader(QNetworkRequest::ContentDispositionHeader, strContentDisposition.toUtf8());
if (itemPart.m_sContentType.isEmpty() == false)
{
httpPart.setHeader(QNetworkRequest::ContentTypeHeader, itemPart.m_sContentType.toUtf8());
}
if (itemPart.m_pData)
{
httpPart.setBody(QByteArray((const char*)itemPart.m_pData, itemPart.m_nDataLen));
}
else
{
httpPart.setBody(itemPart.m_sValue.toUtf8());
}
}
httpMultiPart.append(httpPart);
}
QNetworkAccessManager qNetAccessManager;
QNetworkReply* reply = qNetAccessManager.post(request, &httpMultiPart);
if (reply == nullptr)
{
errMsg = QObject::tr("發送失敗");
return false;
}
QList<QByteArray> headers = reply->rawHeaderList();
// Set time out
QTimer timer;
timer.setInterval(nTimeoutmsec); // 設置超時時間 30 秒
timer.setSingleShot(true); // 單次觸發
// Set Loop Event
QEventLoop eventLoop;
QObject::connect(&timer, &QTimer::timeout, &eventLoop, &QEventLoop::quit);
QObject::connect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
timer.start();
eventLoop.exec(QEventLoop::ExcludeUserInputEvents);
bool bResult = false;
if (timer.isActive())
{
timer.stop();
QNetworkReply::NetworkError replyError = reply->error();
if (replyError != QNetworkReply::NoError)
{
errMsg = reply->errorString();
qDebug() << "Error String : " << reply->errorString() << "\n";
}
else
{
QVariant variant = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
int nStatusCode = variant.toInt();
if (nStatusCode == 200)
{
// Accept Response
respData = reply->readAll();
bResult = true;
}
}
}
else
{
QObject::disconnect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
reply->abort();
qDebug() << data.strUrl << ":Timeout\n";
}
reply->deleteLater();
reply = nullptr;
return bResult;
}
bool UploadMultipartData(const QString &strURL, const CMultiPartDatas &multiPartDatas, QByteArray &respData, QString &errMsg, int nTimeoutmsec)
{
// 創建網絡請求
QNetworkRequest request;
request.setUrl(QUrl::fromUserInput(strURL));
QHttpMultiPart httpMultiPart(QHttpMultiPart::FormDataType);
// 解決Qt自動解析MultiPart得到boundary=帶雙引號問題
request.setHeader(QNetworkRequest::ContentTypeHeader, "multipart/form-data;boundary=" + httpMultiPart.boundary());
foreach (itemPart, multiPartDatas)
{
QHttpPart httpPart;
{
QString strContentDisposition = QString("form-data; name=\"%1\"%2").arg(itemPart.m_sName)
.arg(itemPart.m_sExContentDisposition.isEmpty() ? "" : "; " + itemPart.m_sExContentDisposition);
httpPart.setHeader(QNetworkRequest::ContentDispositionHeader, strContentDisposition.toUtf8());
if (itemPart.m_sContentType.isEmpty() == false)
{
httpPart.setHeader(QNetworkRequest::ContentTypeHeader, itemPart.m_sContentType.toUtf8());
}
if (itemPart.m_pData)
{
httpPart.setBody(QByteArray((const char*)itemPart.m_pData, itemPart.m_nDataLen));
}
else
{
httpPart.setBody(itemPart.m_sValue.toUtf8());
}
}
httpMultiPart.append(httpPart);
}
QNetworkAccessManager qNetAccessManager;
QNetworkReply* reply = qNetAccessManager.post(request, &httpMultiPart);
if (reply == nullptr)
{
errMsg = QObject::tr("發送失敗");
return false;
}
QList<QByteArray> headers = reply->rawHeaderList();
// Set time out
QTimer timer;
timer.setInterval(nTimeoutmsec); // 設置超時時間 30 秒
timer.setSingleShot(true); // 單次觸發
// Set Loop Event
QEventLoop eventLoop;
QObject::connect(&timer, &QTimer::timeout, &eventLoop, &QEventLoop::quit);
QObject::connect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
timer.start();
eventLoop.exec(QEventLoop::ExcludeUserInputEvents);
bool bResult = false;
if (timer.isActive())
{
timer.stop();
QNetworkReply::NetworkError replyError = reply->error();
if (replyError != QNetworkReply::NoError)
{
errMsg = reply->errorString();
qDebug() << "Error String : " << reply->errorString() << "\n";
}
else
{
QVariant variant = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute);
int nStatusCode = variant.toInt();
if (nStatusCode == 200)
{
// Accept Response
respData = reply->readAll();
bResult = true;
}
}
}
else
{
QObject::disconnect(reply, &QNetworkReply::finished, &eventLoop, &QEventLoop::quit);
reply->abort();
qDebug() << strURL << ":Timeout\n";
}
reply->deleteLater();
reply = nullptr;
return bResult;
}
}
到此這篇關于Qt利用QNetwork實現上傳數據的示例代碼的文章就介紹到這了,更多相關Qt QNetwork上傳數據內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
這篇文章主要介紹了C++ 虛函數 virtual的相關資料,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-03-03
這篇文章主要介紹了C++虛函數表和虛析構，虛函數表是C++實現多態的基礎，多態是面向?qū)ο蟮娜筇匦灾?，下面文章我們一起來看看詳?xì)內容,需要的朋友可以參考一下2021-11-11
這篇文章主要為大家詳細介紹了C語言中的柔性數組你，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助2022-02-02
QT使用共享內存實現進程間通訊
這篇文章主要為大家詳細介紹了QT如何使用共享內存實現進程間通訊,文中的示例代碼講解詳細,感興趣的小伙伴可以跟隨小編一起學習一下2024-12-12
這篇文章主要為大家詳細介紹了C語言實現哈夫曼樹的構建，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2020-04-04
這篇文章主要介紹了c++中vector的使用和模擬實現,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-04-04
快速學習C語言中for循環語句的基本使用方法
這篇文章主要簡單介紹了C語言中for循環語句的基本使用方法,是C語言入門學習中的基礎知識,需要的朋友可以參考下2015-11-11
分享一段代碼，一個靜態鏈表的C語言實現，其中包含著一種簡單的內存管理策略：固定大小的鏈?zhǔn)焦芾怼?/div> 2013-03-03
各位小伙伴們，今天YU同學給大家?guī)淼氖桥c函數相關的知識，本篇將會帶著大家初步認識和調用函數來解決一些簡單的問題2022-04-04
C++實現將數據寫入Excel工作表的示例代碼
直觀的界面、出色的計算功能和圖表工具，使Excel成為最流行的個人計算機數據處理軟件。在本文中，您將學習如何使用?Spire.XLS?for?C++?創建?Excel?文檔，以及如何將數據寫入?Excel?工作表2023-03-03最新評論