【pytorch官方文檔】：https://pytorch.org/docs/stable/generated/torch.nn.AvgPool2d.html?highlight=avgpool2d#torch.nn.AvgPool2d

torch.nn.AvgPool2d()

作用

在由多通道組成的輸入特征中進行2D平均池化計算

函數

torch.nn.AvgPool2d(kernel_size, stride=None, padding=0, ceil_mode=False, count_include_pad=True, divisor_override=None)

參數

Args:
    kernel_size: 滑窗(池化核)大小
    stride: 滑窗的移動步長, 默認值為kernel_size
    padding: 在輸入信號兩側的隱式零填充數量
    ceil_mode: 決定計算輸出的形狀時是向上取整還是向下取整, 默認為False(向下取整)
    count_include_pad: 在平均池化計算中是否包含零填充, 默認為True(包含零填充)
    divisor_override: 如果指定了, 它將被作為平均池化計算中的除數, 否則將使用池化區域的大小作為平均池化計算的除數

公式

代碼實例

假設輸入特征為S，輸出特征為D

情況一

ceil_mode=False, count_include_pad=True(計算時包含零填充)

import torch
import torch.nn as nn
import numpy as np
 
 
# 生成一個形狀為1*1*3*3的張量
x1 = np.array([
              [1,2,3],
              [4,5,6],
              [7,8,9]
            ])
x1 = torch.from_numpy(x1).float()
x1 = x1.unsqueeze(0).unsqueeze(0)
 
# 實例化二維平均池化
avgpool1 = nn.AvgPool2d(kernel_size=3, stride=2, padding=1, ceil_mode=False, count_include_pad=True)
y1 = avgpool1(x1)
print(y1)
 
# 打印結果
'''
tensor([[[[1.3333, 1.7778],
          [2.6667, 3.1111]]]])
'''

計算過程：

輸出形狀= floor[(3 - 3 + 2) / 2] + 1 = 2,

D[1,1] = (0+0+0+0+1+2+0+4+5) / 9 = 1.3333,

D[1,2] = (0+0+0+2+3+0+5+6+0) / 9 = 1.7778,

D[2,1] = (0+4+5+0+7+8+0+0+0) / 9 = 2.6667,

D[2,2] = (5+6+0+8+9+0+0+0+0) / 9 = 3.1111.

情況二

ceil_mode=False, count_include_pad=False(計算時不包含零填充)

avgpool2 = nn.AvgPool2d(kernel_size=3, stride=2, padding=1, ceil_mode=False, count_include_pad=False)
 
y2 = avgpool2(x1)
print(y2)
 
# 打印結果
'''
tensor([[[[3., 4.],
          [6., 7.]]]])
'''

計算過程：

輸出形狀= floor[(3 - 3 + 2) / 2] + 1 = 2,

D[1,1] = (1+2+4+5) / 4 = 3,

D[1,2] = (2+3+5+6) / 4 = 4,

D[2,1] = (4+5+7+8) / 4 = 6,

D[2,2] = (5+6+8+9) / 4 = 7.

情況三

ceil_mode=False, count_include_pad=False, divisor_override=2(將計算平均池化時的除數指定為2)

avgpool3 = nn.AvgPool2d(kernel_size=3, stride=2, padding=1, ceil_mode=False, count_include_pad=False, divisor_override=2)
 
y3 = avgpool3(x1)
print(y3)
 
# 打印結果
'''
tensor([[[[ 6.,  8.],
          [12., 14.]]]])
'''

計算過程：

輸出形狀= floor[(3 - 3 + 2) / 2] + 1 = 2,

D[1,1] = (1+2+4+5) / 2 = 6,

D[1,2] = (2+3+5+6) / 2 = 8,

D[2,1] = (4+5+7+8) / 2 = 12,

D[2,2] = (5+6+8+9) / 2 = 14.

情況四

ceil_mode=True, count_include_pad=True, divisor_override=None(在計算輸出的形狀時向上取整)

x2 = np.array([
              [1,2,3,4],
              [5,6,7,8],
              [9,10,11,12],
              [13,14,15,16]
              ])
x2 = torch.from_numpy(x2).reshape(1,1,4,4).float()
avgpool4 = nn.AvgPool2d(kernel_size=3, stride=2, padding=1, ceil_mode=True)
y4 = avgpool4(x2)
print(y4)
 
# 打印結果
'''
tensor([[[[ 1.5556,  3.3333,  2.0000],
          [ 6.3333, 11.0000,  6.0000],
          [ 4.5000,  7.5000,  4.0000]]]])
'''

計算過程：

輸出形狀 = ceil[(4 - 3 + 2) / 2] + 1 = 3,

D[1,1] = (0+0+0+0+1+2+0+5+6) / 9 = 1.5556,

D[1,2] = (0+0+0+2+3+4+6+7+8) / 9 = 3.3333,

D[1,3] = (0+0+4+0+8+0) / 6 = 2,

D[2,1] = (0+5+6+0+9+10+0+13+14) / 9 = 6.3333,

D[2,2] = (6+7+8+10+11+12+14+15+16) / 9 = 11,

D[2,3] = (8+0+12+0+16+0) / 6 = 6,

D[3,1] = (0+13+14+0+0+0) / 6 = 4.5,

D[3,2] = (14+15+16+0+0+0) / 6 = 7.5,

D[3,3] = (16+0+0+0) / 4 = 4.

總結

到此這篇關于Pytorch平均池化nn.AvgPool2d()使用的文章就介紹到這了,更多相關Pytorch平均池化nn.AvgPool2d()使用內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！