基于Python編寫一個刷題練習系統

更新時間：2023年02月21日 09:16:41 作者：Want595

這篇文章主要為大家詳細介紹了如何基于Python語言編寫一個簡單的刷題練習系統，文中的示例代碼講解詳細，感興趣的小伙伴可以了解一下

實現效果

實現代碼

選擇題

def xuanze():
    global flag2
    if flag2==1:
        def insert():
            num=var1.get()
            question=var2.get()
            choice=var3.get()
            answer=var4.get()
            with open('d:\\練習系統\\練習三3.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習三3.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習三3.3.pickle','rb') as file:
                lst3=pickle.load(file)
            with open('d:\\練習系統\\練習三3.4.pickle','rb') as file:
                lst4=pickle.load(file)
            if num not in lst1:
                lst1.append(num)
                lst2.append(question)
                lst3.append(choice)
                lst4.append(answer)
                var5.set('錄入成功')
            else:
                var5.set('錄入失敗')
            with open('d:\\練習系統\\練習三3.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習三3.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習三3.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()
            with open('d:\\練習系統\\練習三3.4.pickle','wb') as file:
                pickle.dump(lst4,file)
                file.close()
        def delete():
            num=var1.get()
            question=var2.get()
            choice=var3.get()
            answer=var4.get()
            with open('d:\\練習系統\\練習三3.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習三3.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習三3.3.pickle','rb') as file:
                lst3=pickle.load(file)
            with open('d:\\練習系統\\練習三3.4.pickle','rb') as file:
                lst4=pickle.load(file)
            if num in lst1:
                t=lst1.index(num)
                lst1.pop(t)
                lst2.pop(t)
                lst3.pop(t)
                lst4.pop(t)
                var5.set('刪除成功')
            else:
                var5.set('刪除失敗')
            with open('d:\\練習系統\\練習三3.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習三3.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習三3.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()
            with open('d:\\練習系統\\練習三3.4.pickle','wb') as file:
                pickle.dump(lst4,file)
                file.close()

填空題

def tiankong():
    global flag2
    if flag2==1:
        def insert():
            num=var1.get()
            question=var2.get()
            answer=var3.get()
            with open('d:\\練習系統\\練習一1.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習一1.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習一1.3.pickle','rb') as file:
                lst3=pickle.load(file)
            if num not in lst1:
                lst1.append(num)
                lst2.append(question)
                lst3.append(answer)
                var4.set('錄入成功')
            else:
                var4.set('錄入失敗')
            with open('d:\\練習系統\\練習一1.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習一1.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習一1.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()
        def delete():
            num=var1.get()
            question=var2.get()
            answer=var3.get()
            with open('d:\\練習系統\\練習一1.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習一1.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習一1.3.pickle','rb') as file:
                lst3=pickle.load(file)
            if num in lst1:
                t=lst1.index(num)
                lst1.pop(t)
                lst2.pop(t)
                lst3.pop(t)
                var4.set('刪除成功')
            else:
                var4.set('刪除失敗')
            with open('d:\\練習系統\\練習一1.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習一1.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習一1.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()

判斷題

def panduan():
    global flag2
    if flag2==1:
        def insert():
            num=var1.get()
            question=var2.get()
            answer=var3.get()
            with open('d:\\練習系統\\練習二2.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習二2.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習二2.3.pickle','rb') as file:
                lst3=pickle.load(file)
            if num not in lst1:
                lst1.append(num)
                lst2.append(question)
                lst3.append(answer)
                var4.set('錄入成功')
            else:
                var4.set('錄入失敗')
            with open('d:\\練習系統\\練習二2.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習二2.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習二2.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()
        def delete():
            num=var1.get()
            question=var2.get()
            answer=var3.get()
            with open('d:\\練習系統\\練習二2.1.pickle','rb') as file:
                lst1=pickle.load(file)
            with open('d:\\練習系統\\練習二2.2.pickle','rb') as file:
                lst2=pickle.load(file)
            with open('d:\\練習系統\\練習二2.3.pickle','rb') as file:
                lst3=pickle.load(file)
            if num in lst1:
                t=lst1.index(num)
                lst1.pop(t)
                lst2.pop(t)
                lst3.pop(t)
                var4.set('刪除成功')
            else:
                var4.set('刪除失敗')
            with open('d:\\練習系統\\練習二2.1.pickle','wb') as file:
                pickle.dump(lst1,file)
                file.close()
            with open('d:\\練習系統\\練習二2.2.pickle','wb') as file:
                pickle.dump(lst2,file)
                file.close()
            with open('d:\\練習系統\\練習二2.3.pickle','wb') as file:
                pickle.dump(lst3,file)
                file.close()

到此這篇關于基于Python編寫一個刷題練習系統的文章就介紹到這了,更多相關Python刷題練習系統內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章:

python多進程間通信代碼實例
這篇文章主要介紹了python多進程間通信代碼實例,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
2019-09-09
python安裝pil庫方法及代碼
在本篇內容里我們給大家分享的是關于python安裝pil庫方法及代碼內容，有此需要的朋友們可以參考下。
2019-06-06
keras輸出預測值和真實值方式
這篇文章主要介紹了keras輸出預測值和真實值方式，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧
2020-06-06
詳解Python中Pytest和Unittest的區別
Pytest?和?Unittest是Python中屬于最常用的兩個測試框架。那么他們有些什么區別呢？?Playwright?為什么只給了Pytest的深度支持，而不是Unittest呢？本文就來和大家詳細聊聊
2023-03-03
python3 selenium自動化測試強大的CSS定位方法
今天小編就為大家分享一篇python3 selenium自動化測試強大的CSS定位方法，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧
2019-08-08
如何通過Python3和ssl實現加密通信功能
這篇文章主要介紹了如何通過Python3和ssl實現加密通信功能,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下
2020-05-05
python模擬Django框架實例
這篇文章主要為大家詳細介紹了python模擬Django框架實例，了解一個web框架需要的基本功能，感興趣的小伙伴們可以參考一下
2016-05-05
解決安裝Python的第三方庫pandas報錯問題
這篇文章主要介紹了解決安裝Python的第三方庫pandas報錯問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教
2023-08-08
Python爬蟲爬取糗事百科段子實例分享
在本篇文章里小編給大家整理了關于Python爬蟲爬取糗事百科段子實例內容，需要的朋友們可以參考下。
2020-07-07
Python中列表list常用方法總結
在?Python?中，列表（List）是一種有序的數據集合，可以存儲任意類型的數據。本文主要幫大家總結了一下列表list的常用方法，需要的可以參考一下
2023-05-05