Android View的事件分發機制深入分析講解
1.分發對象-MotionEvent
事件類型有:
1.ACTION_DOWN-----手指剛接觸屏幕
2.ACTION_MOVE------手指在屏幕上移動
3.ACTION_UP------手指從屏幕上松開的一瞬間
4.ACTION_CANCEL-----事件被上層攔截時觸發
MotionEvent主要的方法:
| getX() | 得到事件發生的x軸坐標(相對于當前視圖) |
| getY() | 得到事件發生的y軸坐標(相對于當前視圖) |
| getRawX() | 得到事件發生的x軸坐標(相對于屏幕左頂點) |
| getRawY() | 得到事件發生的y軸坐標(相對于屏幕左頂點) |
2.如何傳遞事件
1.傳遞流程
底層IMS->ViewRootImpl->activity->viewgroup->view
2.事件分發的源碼解析
1.Activity對點擊事件的分發過程
Activity#dispatchTouchEvent()
public boolean dispatchTouchEvent(MotionEvent ev) {
if (ev.getAction() == MotionEvent.ACTION_DOWN) {
onUserInteraction();
}
//事件交給Activity所附屬的Window進行分發,如果返回true,循環結束,返回false,沒人處理
if (getWindow().superDispatchTouchEvent(ev)) {
return true;
}
//所有View的onTouchEvent都返回false,那么Activity的onTouchEvent就會被調用
return onTouchEvent(ev);
}Window#superDispatchTouchEvent
public abstract boolean superDispatchTouchEvent(MotionEvent event);
PhoneWindow#superDispatchTouchEvent
public boolean superDispatchTouchEvent(MotionEvent event) {
return mDecor.superDispatchTouchEvent(event);
}DecorView#superDispatchTouchEvent()
public boolean superDispatchTouchEvent(MotionEvent event) {
return super.dispatchTouchEvent(event);
}ViewGroup#dispatchTouchEvent()
public boolean dispatchTouchEvent(MotionEvent ev) {<!--{cke_protected}{C}%3C!%2D%2D%20%2D%2D%3E-->2.頂級View對點擊事件的分發過程
把ViewGroup的dispatchTouchEvent()方法中的代碼進行分段說明
第一段:
描述的是View是否攔截點擊事件這個邏輯
// Check for interception.
final boolean intercepted;
if (actionMasked == MotionEvent.ACTION_DOWN
|| mFirstTouchTarget != null) {//事件類型為down或者mFirstTouchTarget有值
final boolean disallowIntercept = (mGroupFlags & FLAG_DISALLOW_INTERCEPT) != 0;
if (!disallowIntercept) {
intercepted = onInterceptTouchEvent(ev);//詢問是否攔截,方法返回true就攔截
ev.setAction(action); // restore action in case it was changed
} else {
intercepted = false;
}
} else {
// There are no touch targets and this action is not an initial down
// so this view group continues to intercept touches.
intercepted = true;//直接攔截了
}當事件類型為down或者mFirstTouchTarget有值時,就不攔截當前事件,否則直接攔截了這個事件。那么mFirstTouchTarget什么時候有值?當ViewGroup不攔截事件并且把事件交給子元素處理時,mFirstTouchTarget就有值并且指向子元素。所以當事件類型為down并且攔截事件,那么mFirstTouchTarget為空,這會讓后面的事件move和up無法滿足mFirstTouchTarget有值的條件,直接無法調用onInterceptTouchEvent方法。
特殊情況:通過requestDisallowInterceptTouchEvent方法來設置標記位FLAG_DISALLOW_INTERCEPT,ViewGroup就無法攔截除了ACTION_DOWN以外的點擊事件,這個標記位無法影響ACTION_DOWN事件,因?yàn)楫?dāng)事件為ACTION_DOWN時,就會重置這個標記位,將導致子View設置的這個標記位無效。
總結:
1.當ViewGroup決定攔截事件后,那么后續的點擊事件將會默認交給它處理并且不再調用它的onInterceptTouchEvent方法。
2.當ViewGroup不攔截ACTION_DOWN事件,那么標記位FLAG_DISALLOW_INTERCEPT讓ViewGroup不再攔截事件。
第二段:
當ViewGroup不攔截事件時,分發事件給子View,看哪個子View處理事件
final int childrenCount = mChildrenCount;
if (newTouchTarget == null && childrenCount != 0) {
final float x =
isMouseEvent ? ev.getXCursorPosition() : ev.getX(actionIndex);
final float y =
isMouseEvent ? ev.getYCursorPosition() : ev.getY(actionIndex);
// Find a child that can receive the event.
// Scan children from front to back.
//對子元素進行排序
final ArrayList<View> preorderedList = buildTouchDispatchChildList();
final boolean customOrder = preorderedList == null
&& isChildrenDrawingOrderEnabled();
final View[] children = mChildren;
for (int i = childrenCount - 1; i >= 0; i--) {
final int childIndex = getAndVerifyPreorderedIndex(
childrenCount, i, customOrder);
final View child = getAndVerifyPreorderedView(
preorderedList, children, childIndex);
// If there is a view that has accessibility focus we want it
// to get the event first and if not handled we will perform a
// normal dispatch. We may do a double iteration but this is
// safer given the timeframe.
if (childWithAccessibilityFocus != null) {
if (childWithAccessibilityFocus != child) {
continue;
}
childWithAccessibilityFocus = null;
i = childrenCount - 1;
}
if (!child.canReceivePointerEvents()
|| !isTransformedTouchPointInView(x, y, child, null)) {
ev.setTargetAccessibilityFocus(false);
continue;
}
newTouchTarget = getTouchTarget(child);
if (newTouchTarget != null) {
// Child is already receiving touch within its bounds.
// Give it the new pointer in addition to the ones it is handling.
newTouchTarget.pointerIdBits |= idBitsToAssign;
break;
}
resetCancelNextUpFlag(child);
if (dispatchTransformedTouchEvent(ev, false, child, idBitsToAssign)) {
// Child wants to receive touch within its bounds.
//
mLastTouchDownTime = ev.getDownTime();
if (preorderedList != null) {
// childIndex points into presorted list, find original index
for (int j = 0; j < childrenCount; j++) {
if (children[childIndex] == mChildren[j]) {
mLastTouchDownIndex = j;
break;
}
}
} else {
mLastTouchDownIndex = childIndex;
}
mLastTouchDownX = ev.getX();
mLastTouchDownY = ev.getY();
newTouchTarget = addTouchTarget(child, idBitsToAssign);
alreadyDispatchedToNewTouchTarget = true;
break;
}遍歷ViewGroup的所有的子元素,判斷子元素是否在播動畫和點擊事件的坐標是否落在子元素的區域內,如果是,就能接收到點擊事件,并且事件會傳遞給它來處理。
我們來看一下dispatchTransformedTouchEvent方法
private boolean dispatchTransformedTouchEvent(MotionEvent event, boolean cancel,
View child, int desiredPointerIdBits) {
...
if (child == null) {
handled = super.dispatchTouchEvent(event);
} else {
handled = child.dispatchTouchEvent(event);
}
...
}dispatchTransformedTouchEvent實際上調用的是子元素的dispatchTouchEvent方法。
如果子元素的dispatchTouchEvent方法返回true,那么mFirstTouchTarget就會被賦值同時跳出for循環
newTouchTarget = addTouchTarget(child, idBitsToAssign); alreadyDispatchedToNewTouchTarget = true; break;
這幾行代碼完成了mFirstTouchTarget的賦值并終止對子元素的遍歷,如果子元素的dispatchTouchEvent方法返回false,那么ViewGroup就會把事件分發給下一個子元素。
其實mFirstTouchTarget真正的賦值是在addTouchTarget方法里面,mFirstTouchTarget是一種單鏈表結構。
private TouchTarget addTouchTarget(@NonNull View child, int pointerIdBits) {
final TouchTarget target = TouchTarget.obtain(child, pointerIdBits);
target.next = mFirstTouchTarget;
mFirstTouchTarget = target;
return target;
}第三段:
執行事件
//當前View的事件處理代碼
if (mFirstTouchTarget == null) {
// No touch targets so treat this as an ordinary view.
handled = dispatchTransformedTouchEvent(ev, canceled, null,
TouchTarget.ALL_POINTER_IDS);
} else {
//子View的事件處理代碼
...dispatchTransformedTouchEvent方法的第三個參數為null,則會調用super.dispatchTouchEvent方法,也就是View的dispatchTouchEvent方法,所以點擊事件給View處理。
View對點擊事件的處理過程
View(不包含ViewGroup)是一個單獨的元素,沒有子元素,只能自己處理事件。
public boolean dispatchTouchEvent(MotionEvent event) {
...
boolean result = false;
...
if (onFilterTouchEventForSecurity(event)) {
if ((mViewFlags & ENABLED_MASK) == ENABLED && handleScrollBarDragging(event)) {
result = true;
}
//noinspection SimplifiableIfStatement
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnTouchListener != null
&& (mViewFlags & ENABLED_MASK) == ENABLED
&& li.mOnTouchListener.onTouch(this, event)) {
result = true;
}
if (!result && onTouchEvent(event)) {
result = true;
}
}
...
return result;
}首先判斷是否設置了OnTouchListener,如果OnTouchListener的onTouch方法返回true,就不會調用onTouchEvent方法,否則就會調用onTouchEvent方法。
public boolean onTouchEvent(MotionEvent event) {
...
if ((viewFlags & ENABLED_MASK) == DISABLED
&& (mPrivateFlags4 & PFLAG4_ALLOW_CLICK_WHEN_DISABLED) == 0) {
if (action == MotionEvent.ACTION_UP && (mPrivateFlags & PFLAG_PRESSED) != 0) {
setPressed(false);
}
mPrivateFlags3 &= ~PFLAG3_FINGER_DOWN;
// A disabled view that is clickable still consumes the touch
// events, it just doesn't respond to them.
return clickable;
}
...
}不可用狀態下的View照樣會消耗點擊事件
switch (action) {
case MotionEvent.ACTION_UP:
mPrivateFlags3 &= ~PFLAG3_FINGER_DOWN;
if ((viewFlags & TOOLTIP) == TOOLTIP) {
handleTooltipUp();
}
...
if ((mPrivateFlags & PFLAG_PRESSED) != 0 || prepressed) {
...
if (!mHasPerformedLongPress && !mIgnoreNextUpEvent) {
removeLongPressCallback();
// Only perform take click actions if we were in the pressed state
if (!focusTaken) {
// Use a Runnable and post this rather than calling
// performClick directly. This lets other visual state
// of the view update before click actions start.
if (mPerformClick == null) {
mPerformClick = new PerformClick();
}
if (!post(mPerformClick)) {
performClickInternal();
}
}
}
}
...
mIgnoreNextUpEvent = false;
break;當ACTION_UP事件發生時,會觸發performClick方法,如果View設置了OnClickListener,那么performClick方法內部會調用它的onClick方法。
private boolean performClickInternal() {
// Must notify autofill manager before performing the click actions to avoid scenarios where
// the app has a click listener that changes the state of views the autofill service might
// be interested on.
notifyAutofillManagerOnClick();
return performClick();
}public boolean performClick() {
final boolean result;
final ListenerInfo li = mListenerInfo;
//關鍵代碼,判斷是否設置了onClickListener
if (li != null && li.mOnClickListener != null) {
playSoundEffect(SoundEffectConstants.CLICK);
li.mOnClickListener.onClick(this);
result = true;
} else {
result = false;
}
...
return result;//最終返回執行結果
}點擊事件的分發機制的源碼實現已經分析完了。
3.主要方法
1.dispatchTouchEvent:用來進行事件的分發,如果事件可以傳遞給當前View,那么此方法一定會被調用,返回結果受當前View的onTouchEvent和下級View的dispatchTouchEvent方法的影響,表示是否消耗當前事件。
2.onInterceptTouchEvent:用來判斷是否攔截某個事件,如果當前View攔截了某個事件,那么在同一事件序列當中,此方法不會被再次調用,返回結果表示是否攔截當前事件。
3.onTouchEvent:用來處理點擊事件,返回結果表示是否消耗當前事件,如果不消耗,則在同一個事件序列中,當前View無法再次接收到事件。
4.requestDisallowInterceptTouchEvent:一般用于子View中,要求父View不攔截事件。
5.dispatchTransformedTouchEvent:如果child不為空,就發到child的dispatchTouchEvent中,否則發給自己。
4.事件傳遞中l(wèi)istener
onTouch,performClick和onClick調用的順序以及onTouch返回值的影響?
當一個View需要處理事件時,View的dispatchTouchEvent方法中,如果設置了OnTouchListener,那么OnTouchListener的onTouch方法會被調用,當onTouch方法返回true時,onTouchEvent就不會被調用,當onTouch方法返回false時,onTouchEvent方法就被調用,在onTouchEvent方法里面進入performClick方法,在performClick方法里面判斷是否設置onClickListener,并且如果設置了onClickListener,那么onClick方法就被調用,performClick方法就返回true,如果沒有設置了onClickListener,performClick方法就返回false。
總的來說方法調用的順序?yàn)?/p>

5.滑動沖突如何用事件分發處理
滑動沖突定義:當有內外兩層View都可以響應事件時,事件由誰來決定。
滑動沖突類型:1.當內外兩層View滑動方向不一致
2.當內外兩層滑動方向一致的時候
3.兩種情況疊加
解決思路:
內部攔截:dispatchTouchEvent+dispatchTransformedTouchEvent
重寫子元素的dispatchTouchEvent方法
down事件分發給子元素,move事件是看條件的,如果不滿足條件,就把事件交給子元素處理,如果滿足條件,就會取消子元素的處理事件,然后把事件交給父元
public boolean dispatchTouchEvent(MotionEvent event) {
int x = (int) event.getX();
int y = (int) event.getY();
switch (event.getAction()) {
case MotionEvent.ACTION_DOWN: {
//down事件,父容器不要攔截我
parent.requestDisallowInterceptTouchEvent(true);
break;
}
case MotionEvent.ACTION_MOVE: {
int deltaX = x - mLastX;
int deltaY = y - mLastY;
if (父容器需要此類點擊事件) {
//父容器攔截我
parent.requestDisallowInterceptTouchEvent(false);
}
break;
}
case MotionEvent.ACTION_UP: {
break;
}
default:
break;
}
mLastX = x;
mLastY = y;
return super.dispatchTouchEvent(event);
}(當move事件時,進入第一塊代碼,調用intercepted = onInterceptTouchEvent(ev),我們?cè)趏nInterceptTouchEvent方法中設置不是down事件就返回true,所以intercepted為true,然后第二塊代碼不會執行,進入第三塊代碼,因?yàn)閕ntercepted為true,所以cancelChild就為true,取消子元素事件執行,調用dispatchTransformedTouchEvent方法,cancel為true->
event.setAction(MotionEvent.ACTION_CANCEL)->handled = child.dispatchTouchEvent(event)
把mFirstTouchTarget設置為空,所以到下一個move事件來的時候,mFirstTouchTarget是為空的,在第一段代碼中intercepted為true,第二段代碼不執行,第三塊代碼走dispatchTransformedTouchEvent(ev, canceled, null, TouchTarget.ALL_POINTER_IDS),即由當前View的事件處理代碼(父元素))
重寫父元素的onInterceptTouchEvent方法
當為down事件時,要return false,因?yàn)樵赩iewGroup的dispatchTouchEvent方法中,當為down事件時,會調用resetTouchState()方法,在resetTouchState()方法里面會重置狀態,把mGroupFlags也重置,這樣會導致在前面的parent.requestDisallowInterceptTouchEvent(true)沒有用,所以我們?cè)趏nInterceptTouchEvent方法里面要設置為down事件時返回false,因?yàn)樵赿own事件時onInterceptTouchEvent一定會執行。
public boolean onInterceptTouchEvent(MotionEvent event) {
int action = event.getAction();
if (action == MotionEvent.ACTION_DOWN) {
super.onInterceptTouchEvent(event);
return false;
} else {
return true;
}
}外部攔截:onInterceptTouchEvent
點擊事件先經過父容器的攔截處理,如果父容器需要這件事就攔截,不需要就不攔截。
public boolean onInterceptTouchEvent(MotionEvent event) {
boolean intercepted = false;
int x = (int) event.getX();
int y = (int) event.getY();
switch (event.getAction()) {
case MotionEvent.ACTION_DOWN: {
intercepted = false;
break;
}
case MotionEvent.ACTION_MOVE: {
if (滿足父容器的攔截要求) {
intercepted = true;
} else {
intercepted = false;
}
break;
}
case MotionEvent.ACTION_UP: {
intercepted = false;
break;
}
default:
break;
}
mLastXIntercept = x;
mLastYIntercept = y;
return intercepted;
}到此這篇關于Android View的事件分發機制深入分析講解的文章就介紹到這了,更多相關Android View事件分發機制內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家!
相關文章
Android自定義條形對比統計圖
這篇文章主要為大家詳細介紹了Android自定義條形對比統計圖,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2020-07-07
Android實現網絡多線程斷點續傳下載實例
本示例介紹在Android平臺下通過HTTP協議實現斷點續傳下載。具有一定的參考價值,感興趣的小伙伴們可以參考一下。2016-10-10
用原生VideoView進行全屏播放時的問題
本篇文章主要介紹了用原生VideoView進行全屏播放時的問題,具有一定的參考價值,下面跟著小編一起來看下吧2017-01-01
Flutter之可滾動組件子項緩存?KeepAlive詳解
這篇文章主要為大家詳細介紹了Flutter之可滾動組件子項緩存?KeepAlive,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2022-08-08
Android 個人理財工具一:項目概述與啟動界面的實現
本文主要介紹Android 開發個人理財工具項目概述與啟動界面的實現,這里主要對實現項目的流程做了詳細概述,并對啟動界面簡單實現,有需要的小伙伴可以參考下2016-08-08
Android訪問assets本地json文件的方法
這篇文章主要介紹了Android訪問assets本地json文件的方法,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-10-10
Android編程實現錄音及保存播放功能的方法【附demo源碼下載】
這篇文章主要介紹了Android編程實現錄音及保存播放功能的方法,結合實例形式分析了Android基于MediaRecorder類進行錄音機保存播放功能的相關操作技巧,并附帶demo源碼供讀者下載,需要的朋友可以參考下2018-01-01
Android實現簡單時鐘View的方法
這篇文章主要為大家詳細介紹了Android實現簡單的時鐘View,關鍵點在Canvas的平移與旋轉,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-08-08
Android 實現圓角圖片的簡單實例
這篇文章主要介紹了Android 實現圓角圖片的簡單實例的相關資料,Android 圓角圖片的實現形式,包括用第三方、也有系統,需要的朋友可以參考下2017-07-07

