C#實現掃描局域網內的所有IP和端口
更新時間：2022年12月28日 08:44:28 作者：芝麻粒兒
這篇文章主要為大家詳細介紹了如何利用C#實現掃描局域網內的所有IP和端口的功能，文中的示例代碼講解詳細，對我們學習C#有一定的幫助，感興趣的小伙伴可以跟隨小編一起了解一下
實踐過程
效果
代碼
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
#region 實例化類對象及公共變量
private Thread myThread;
string StartIPAddress = "";
string EndIPAddress = "";
int intStrat =0; //開始掃描地址
int intEnd = 0; //終止掃描地址
string strIP = "";
string strflag = ""; //掃描到的IP地址
#endregion
private void button1_Click(object sender, EventArgs e)
{
try
{
if (button1.Text == "開始")
{
listView1.Items.Clear(); //清空ListView控件中的項
textBox1.Enabled = textBox2.Enabled = false;
strIP = "";
strflag = textBox1.Text;
StartIPAddress = textBox1.Text;
EndIPAddress = textBox2.Text;
//開始掃描地址
intStrat = Int32.Parse(StartIPAddress.Substring(StartIPAddress.LastIndexOf(".") + 1));
//終止掃描地址
intEnd = Int32.Parse(EndIPAddress.Substring(EndIPAddress.LastIndexOf(".") + 1));
//指定進度條最大值
progressBar1.Minimum = intStrat;
//指定進度條最小值
progressBar1.Maximum = intEnd;
//指定進度條初始值
progressBar1.Value = progressBar1.Minimum;
timer1.Start(); //開始運行計時器
button1.Text = "停止"; //設置按鈕文本為停止
//使用自定義方法StartScan實例化線程對象
myThread = new Thread(new ThreadStart(this.StartScan));
myThread.Start(); //開始運行掃描IP的線程
}
else
{
textBox1.Enabled = textBox2.Enabled = true;
button1.Text = "開始"; //設置按鈕文本為開始
timer1.Stop(); //停止運行計時器
//設置進度條的值為最大值
progressBar1.Value = intEnd;
if (myThread != null) //判斷線程對象是否為空
{
//判斷掃描IP地址的線程是否正在運行
if (myThread.ThreadState == ThreadState.Running)
{
myThread.Abort(); //終止線程
}
}
}
}
catch { }
}
private void timer1_Tick(object sender, EventArgs e)
{
if (strIP != "") //判讀是否有可用IP地址
{
if (strIP.IndexOf(',') == -1)
{
if (listView1.Items.Count > 0)
{
for (int i = 0; i < listView1.Items.Count; i++)
{
//判斷掃描到的IP地址是否與列表中的重復
if (listView1.Items[i].Text != strIP)
{
//向列表中添加掃描到的已用IP地址
listView1.Items.Add(strIP);
}
}
}
else
//向列表匯總添加掃描到的已用IP地址
listView1.Items.Add(strIP);
}
else
{
string[] strIPS = strIP.Split(',');
for (int i = 0; i < strIPS.Length; i++)
{
listView1.Items.Add(strIPS[i].ToString());
}
}
strIP = "";
}
for (int i = 0; i < listView1.Items.Count; i++)
listView1.Items[i].ImageIndex = 0;
if (progressBar1.Value < progressBar1.Maximum) //判斷進度條的當前值是否超出其最大值
progressBar1.Value = Int32.Parse(strflag.Substring(strflag.LastIndexOf(".") + 1)); //將進度條的值加1
if (strflag == textBox2.Text) //判斷正在掃描的IP地址是否是結束IP地址
{
timer1.Stop(); //停止運行計時器
textBox1.Enabled = textBox2.Enabled = true;
button1.Text = "開始"; //設置按鈕文本為掃描
MessageBox.Show("IP地址掃描結束！");
}
}
private void Form1_FormClosed(object sender, FormClosedEventArgs e)
{
if (myThread != null) //判斷線程對象是否為空
{
//判斷掃描IP地址的線程是否正在運行
if (myThread.ThreadState == ThreadState.Running)
{
myThread.Abort(); //終止線程
}
}
}
#region 掃描局域網IP地址
/// <summary>
/// 掃描局域網IP地址
/// </summary>
private void StartScan()
{
//掃描的操作
for (int i = intStrat; i <= intEnd; i++)
{
string strScanIP = StartIPAddress.Substring(0, StartIPAddress.LastIndexOf(".") + 1) + i.ToString();
//轉換成IP地址
IPAddress myScanIP = IPAddress.Parse(strScanIP);
strflag = strScanIP;
try
{
//址獲取DNS主機信息
IPHostEntry myScanHost = Dns.GetHostByAddress(myScanIP);
//獲取主機名
string strHostName = myScanHost.HostName.ToString();
if (strIP == "")
strIP += strScanIP + "->" + strHostName;
else
strIP += "," + strScanIP + "->" + strHostName;
}
catch { }
}
}
#endregion
}
partial class Form1
{
/// <summary>
/// 必需的設計器變量。
/// </summary>
private System.ComponentModel.IContainer components = null;
/// <summary>
/// 清理所有正在使用的資源。
/// </summary>
/// <param name="disposing">如果應釋放托管資源，為 true；否則為 false。</param>
protected override void Dispose(bool disposing)
{
if (disposing && (components != null))
{
components.Dispose();
}
base.Dispose(disposing);
}
#region Windows 窗體設計器生成的代碼
/// <summary>
/// 設計器支持所需的方法 - 不要
/// 使用代碼編輯器修改此方法的內容。
/// </summary>
private void InitializeComponent()
{
this.components = new System.ComponentModel.Container();
System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Form1));
this.groupBox1 = new System.Windows.Forms.GroupBox();
this.label1 = new System.Windows.Forms.Label();
this.textBox1 = new System.Windows.Forms.TextBox();
this.textBox2 = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.button1 = new System.Windows.Forms.Button();
this.progressBar1 = new System.Windows.Forms.ProgressBar();
this.timer1 = new System.Windows.Forms.Timer(this.components);
this.imageList1 = new System.Windows.Forms.ImageList(this.components);
this.listView1 = new System.Windows.Forms.ListView();
this.groupBox1.SuspendLayout();
this.SuspendLayout();
//
// groupBox1
//
this.groupBox1.Controls.Add(this.button1);
this.groupBox1.Controls.Add(this.textBox2);
this.groupBox1.Controls.Add(this.label2);
this.groupBox1.Controls.Add(this.textBox1);
this.groupBox1.Controls.Add(this.label1);
this.groupBox1.Location = new System.Drawing.Point(4, -1);
this.groupBox1.Name = "groupBox1";
this.groupBox1.Size = new System.Drawing.Size(247, 73);
this.groupBox1.TabIndex = 0;
this.groupBox1.TabStop = false;
//
// label1
//
this.label1.AutoSize = true;
this.label1.Location = new System.Drawing.Point(9, 21);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(65, 12);
this.label1.TabIndex = 0;
this.label1.Text = "開始地址：";
//
// textBox1
//
this.textBox1.Location = new System.Drawing.Point(71, 18);
this.textBox1.Name = "textBox1";
this.textBox1.Size = new System.Drawing.Size(112, 21);
this.textBox1.TabIndex = 1;
this.textBox1.Text = "192.168.1.1";
//
// textBox2
//
this.textBox2.Location = new System.Drawing.Point(71, 45);
this.textBox2.Name = "textBox2";
this.textBox2.Size = new System.Drawing.Size(112, 21);
this.textBox2.TabIndex = 3;
this.textBox2.Text = "192.168.1.255";
//
// label2
//
this.label2.AutoSize = true;
this.label2.Location = new System.Drawing.Point(9, 48);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(65, 12);
this.label2.TabIndex = 2;
this.label2.Text = "結束地址：";
//
// button1
//
this.button1.Location = new System.Drawing.Point(189, 20);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(50, 44);
this.button1.TabIndex = 4;
this.button1.Text = "開始";
this.button1.UseVisualStyleBackColor = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// progressBar1
//
this.progressBar1.Location = new System.Drawing.Point(4, 276);
this.progressBar1.Name = "progressBar1";
this.progressBar1.Size = new System.Drawing.Size(247, 15);
this.progressBar1.TabIndex = 2;
//
// timer1
//
this.timer1.Interval = 1000;
this.timer1.Tick += new System.EventHandler(this.timer1_Tick);
//
// imageList1
//
this.imageList1.ImageStream = ((System.Windows.Forms.ImageListStreamer)(resources.GetObject("imageList1.ImageStream")));
this.imageList1.TransparentColor = System.Drawing.Color.Transparent;
this.imageList1.Images.SetKeyName(0, "ip.ico");
//
// listView1
//
this.listView1.FullRowSelect = true;
this.listView1.LargeImageList = this.imageList1;
this.listView1.Location = new System.Drawing.Point(4, 78);
this.listView1.Name = "listView1";
this.listView1.Size = new System.Drawing.Size(247, 192);
this.listView1.SmallImageList = this.imageList1;
this.listView1.StateImageList = this.imageList1;
this.listView1.TabIndex = 3;
this.listView1.UseCompatibleStateImageBehavior = false;
this.listView1.View = System.Windows.Forms.View.List;
//
// Form1
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(256, 293);
this.Controls.Add(this.listView1);
this.Controls.Add(this.progressBar1);
this.Controls.Add(this.groupBox1);
this.MaximizeBox = false;
this.MinimizeBox = false;
this.Name = "Form1";
this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
this.Text = "局域網IP地址掃描";
this.FormClosed += new System.Windows.Forms.FormClosedEventHandler(this.Form1_FormClosed);
this.groupBox1.ResumeLayout(false);
this.groupBox1.PerformLayout();
this.ResumeLayout(false);
}
#endregion
private System.Windows.Forms.GroupBox groupBox1;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.TextBox textBox2;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.TextBox textBox1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.ProgressBar progressBar1;
private System.Windows.Forms.Timer timer1;
private System.Windows.Forms.ImageList imageList1;
private System.Windows.Forms.ListView listView1;
}
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
#region 實例化類對象和公共變量
//實例化DirectoryEntry對象，以便獲得局域網組名和計算機名
DirectoryEntry DEMain = new DirectoryEntry("WinNT:");
TcpClient TClient = null; //實例化連接偵聽對象
private Thread myThread; //實例化線程對象
string strName = ""; //記錄選擇的計算機名稱
int intflag = 0; //掃描到的端口號
int intport = 0; //記錄已用端口號
int intstart = 0; //掃描的開始端口號
int intend = 0; //掃描的結束端口號
#endregion
private void Form1_Load(object sender, EventArgs e)
{
//遍歷局域網中的工作組，并顯示在下拉列表控件中
foreach (DirectoryEntry DEGroup in DEMain.Children)
{
comboBox1.Items.Add(DEGroup.Name);
}
}
private void comboBox1_SelectedIndexChanged(object sender, EventArgs e)
{
listBox1.Items.Clear();
foreach (DirectoryEntry DEGroup in DEMain.Children)
{
//判斷工作組名稱
if (DEGroup.Name.ToLower() == comboBox1.Text.ToLower())
{
//遍歷指定工作組中的所有計算機名稱，并顯示在ListBox控件中
foreach (DirectoryEntry DEComputer in DEGroup.Children)
{
if (DEComputer.Name.ToLower() != "schema")
{
listBox1.Items.Add(DEComputer.Name);
}
}
}
}
}
private void button1_Click(object sender, EventArgs e)
{
listView1.Items.Clear(); //清空ListView控件中的項
try
{
if (button1.Text == "掃描")
{
intport = 0; //初始化已用端口號
//指定進度條最大值
progressBar1.Minimum = Convert.ToInt32(textBox1.Text);
//指定進度條最小值
progressBar1.Maximum = Convert.ToInt32(textBox2.Text);
//指定進度條初始值
progressBar1.Value = progressBar1.Minimum;
timer1.Start(); //開始運行計時器
button1.Text = "停止"; //設置按鈕文本為停止
intstart = Convert.ToInt32(textBox1.Text); //為開始掃描的端口號賦值
intend = Convert.ToInt32(textBox2.Text); //為結束掃描的端口號賦值
//使用自定義方法StartScan實例化線程對象
myThread = new Thread(new ThreadStart(this.StartScan));
myThread.Start(); //開始運行掃描端口號的線程
}
else
{
button1.Text = "掃描"; //設置按鈕文本為掃描
timer1.Stop(); //停止運行計時器
//設置進度條的值為最大值
progressBar1.Value = Convert.ToInt32(textBox2.Text);
if (myThread != null) //判斷線程對象是否為空
{
//判斷掃描端口號的線程是否正在運行
if (myThread.ThreadState == ThreadState.Running)
{
myThread.Abort(); //終止線程
}
}
}
}
catch { }
}
private void Form1_FormClosed(object sender, FormClosedEventArgs e)
{
if (myThread != null) //判斷線程對象是否為空
{
//判斷掃描端口號的線程是否正在運行
if (myThread.ThreadState == ThreadState.Running)
{
myThread.Abort(); //終止線程
}
}
}
private void listBox1_Click(object sender, EventArgs e)
{
strName = listBox1.SelectedItem.ToString(); //記錄選擇的計算機名稱
}
private void timer1_Tick(object sender, EventArgs e)
{
if (intport != 0) //判讀是否有可用端口號
{
if (listView1.Items.Count > 0)
{
for (int i = 0; i < listView1.Items.Count; i++)
{
//判斷掃描到的端口號是否與列表中的重復
if (listView1.Items[i].Text != intport.ToString())
{
//向列表中添加掃描到的已用端口號
listView1.Items.Add(intport.ToString());
}
}
}
else
//向列表匯總添加掃描到的已用端口號
listView1.Items.Add(intport.ToString());
intport = 0;
}
if (progressBar1.Value < progressBar1.Maximum) //判斷進度條的當前值是否超出其最大值
progressBar1.Value += 1; //將進度條的值加1
if (intflag == Convert.ToInt32(textBox2.Text)) //判斷正在掃描的端口號是否是結束端口號
{
timer1.Stop(); //停止運行計時器
button1.Text = "掃描"; //設置按鈕文本為掃描
MessageBox.Show("端口掃描結束！");
}
}
#region 掃描端口號
/// <summary>
/// 掃描端口號
/// </summary>
private void StartScan()
{
while (true)
{
for (int i = intstart; i <= intend; i++)
{
intflag = i; //記錄正在掃描的端口號
try
{
TClient = new TcpClient(strName, i);//使用記錄的計算機名稱和端口號實例化偵聽對象
intport = i; //記錄已分配的端口號
}
catch { }
}
}
}
#endregion
}
partial class Form1
{
/// <summary>
/// 必需的設計器變量。
/// </summary>
private System.ComponentModel.IContainer components = null;
/// <summary>
/// 清理所有正在使用的資源。
/// </summary>
/// <param name="disposing">如果應釋放托管資源，為 true；否則為 false。</param>
protected override void Dispose(bool disposing)
{
if (disposing && (components != null))
{
components.Dispose();
}
base.Dispose(disposing);
}
#region Windows 窗體設計器生成的代碼
/// <summary>
/// 設計器支持所需的方法 - 不要
/// 使用代碼編輯器修改此方法的內容。
/// </summary>
private void InitializeComponent()
{
this.components = new System.ComponentModel.Container();
this.groupBox1 = new System.Windows.Forms.GroupBox();
this.listBox1 = new System.Windows.Forms.ListBox();
this.label2 = new System.Windows.Forms.Label();
this.comboBox1 = new System.Windows.Forms.ComboBox();
this.label1 = new System.Windows.Forms.Label();
this.groupBox2 = new System.Windows.Forms.GroupBox();
this.button1 = new System.Windows.Forms.Button();
this.label4 = new System.Windows.Forms.Label();
this.textBox2 = new System.Windows.Forms.TextBox();
this.textBox1 = new System.Windows.Forms.TextBox();
this.label3 = new System.Windows.Forms.Label();
this.timer1 = new System.Windows.Forms.Timer(this.components);
this.listView1 = new System.Windows.Forms.ListView();
this.progressBar1 = new System.Windows.Forms.ProgressBar();
this.groupBox1.SuspendLayout();
this.groupBox2.SuspendLayout();
this.SuspendLayout();
//
// groupBox1
//
this.groupBox1.Controls.Add(this.listBox1);
this.groupBox1.Controls.Add(this.label2);
this.groupBox1.Controls.Add(this.comboBox1);
this.groupBox1.Controls.Add(this.label1);
this.groupBox1.Location = new System.Drawing.Point(8, 7);
this.groupBox1.Name = "groupBox1";
this.groupBox1.Size = new System.Drawing.Size(127, 225);
this.groupBox1.TabIndex = 0;
this.groupBox1.TabStop = false;
this.groupBox1.Text = "選擇計算機";
//
// listBox1
//
this.listBox1.FormattingEnabled = true;
this.listBox1.ItemHeight = 12;
this.listBox1.Location = new System.Drawing.Point(22, 81);
this.listBox1.Name = "listBox1";
this.listBox1.Size = new System.Drawing.Size(94, 136);
this.listBox1.TabIndex = 3;
this.listBox1.Click += new System.EventHandler(this.listBox1_Click);
//
// label2
//
this.label2.AutoSize = true;
this.label2.Location = new System.Drawing.Point(10, 65);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(53, 12);
this.label2.TabIndex = 2;
this.label2.Text = "計算機：";
//
// comboBox1
//
this.comboBox1.FormattingEnabled = true;
this.comboBox1.Location = new System.Drawing.Point(22, 39);
this.comboBox1.Name = "comboBox1";
this.comboBox1.Size = new System.Drawing.Size(94, 20);
this.comboBox1.TabIndex = 1;
this.comboBox1.SelectedIndexChanged += new System.EventHandler(this.comboBox1_SelectedIndexChanged);
//
// label1
//
this.label1.AutoSize = true;
this.label1.Location = new System.Drawing.Point(10, 22);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(53, 12);
this.label1.TabIndex = 0;
this.label1.Text = "工作組：";
//
// groupBox2
//
this.groupBox2.Controls.Add(this.listView1);
this.groupBox2.Controls.Add(this.button1);
this.groupBox2.Controls.Add(this.label4);
this.groupBox2.Controls.Add(this.textBox2);
this.groupBox2.Controls.Add(this.textBox1);
this.groupBox2.Controls.Add(this.label3);
this.groupBox2.Location = new System.Drawing.Point(142, 7);
this.groupBox2.Name = "groupBox2";
this.groupBox2.Size = new System.Drawing.Size(196, 225);
this.groupBox2.TabIndex = 1;
this.groupBox2.TabStop = false;
this.groupBox2.Text = "掃描計算機已用端口號";
//
// button1
//
this.button1.Location = new System.Drawing.Point(147, 38);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(41, 23);
this.button1.TabIndex = 5;
this.button1.Text = "掃描";
this.button1.UseVisualStyleBackColor = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// label4
//
this.label4.AutoSize = true;
this.label4.Location = new System.Drawing.Point(70, 43);
this.label4.Name = "label4";
this.label4.Size = new System.Drawing.Size(17, 12);
this.label4.TabIndex = 4;
this.label4.Text = "到";
//
// textBox2
//
this.textBox2.Location = new System.Drawing.Point(88, 39);
this.textBox2.Name = "textBox2";
this.textBox2.Size = new System.Drawing.Size(51, 21);
this.textBox2.TabIndex = 3;
//
// textBox1
//
this.textBox1.Location = new System.Drawing.Point(16, 39);
this.textBox1.Name = "textBox1";
this.textBox1.Size = new System.Drawing.Size(51, 21);
this.textBox1.TabIndex = 2;
//
// label3
//
this.label3.AutoSize = true;
this.label3.Location = new System.Drawing.Point(8, 21);
this.label3.Name = "label3";
this.label3.Size = new System.Drawing.Size(125, 12);
this.label3.TabIndex = 1;
this.label3.Text = "請設定端口掃描范圍：";
//
// timer1
//
this.timer1.Interval = 1000;
this.timer1.Tick += new System.EventHandler(this.timer1_Tick);
//
// listView1
//
this.listView1.Location = new System.Drawing.Point(16, 67);
this.listView1.Name = "listView1";
this.listView1.Size = new System.Drawing.Size(172, 150);
this.listView1.TabIndex = 6;
this.listView1.UseCompatibleStateImageBehavior = false;
this.listView1.View = System.Windows.Forms.View.SmallIcon;
//
// progressBar1
//
this.progressBar1.Dock = System.Windows.Forms.DockStyle.Bottom;
this.progressBar1.Location = new System.Drawing.Point(0, 236);
this.progressBar1.Name = "progressBar1";
this.progressBar1.Size = new System.Drawing.Size(342, 15);
this.progressBar1.TabIndex = 2;
//
// Form1
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(342, 251);
this.Controls.Add(this.progressBar1);
this.Controls.Add(this.groupBox2);
this.Controls.Add(this.groupBox1);
this.Name = "Form1";
this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
this.Text = "局域網端口掃描";
this.Load += new System.EventHandler(this.Form1_Load);
this.FormClosed += new System.Windows.Forms.FormClosedEventHandler(this.Form1_FormClosed);
this.groupBox1.ResumeLayout(false);
this.groupBox1.PerformLayout();
this.groupBox2.ResumeLayout(false);
this.groupBox2.PerformLayout();
this.ResumeLayout(false);
}
#endregion
private System.Windows.Forms.GroupBox groupBox1;
private System.Windows.Forms.ListBox listBox1;
private System.Windows.Forms.Label label2;
private System.Windows.Forms.ComboBox comboBox1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.GroupBox groupBox2;
private System.Windows.Forms.TextBox textBox1;
private System.Windows.Forms.Label label3;
private System.Windows.Forms.Label label4;
private System.Windows.Forms.TextBox textBox2;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.Timer timer1;
private System.Windows.Forms.ListView listView1;
private System.Windows.Forms.ProgressBar progressBar1;
}
到此這篇關于C#實現掃描局域網內的所有IP和端口的文章就介紹到這了,更多相關C#掃描局域網IP端口內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
詳解DataGridView控件的數據綁定
本文詳細講解了DataGridView控件的數據綁定，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-02-02
這篇文章主要介紹了C#從畫刷創建畫筆的方法,涉及C#圖形繪制的基本技巧,需要的朋友可以參考下2015-06-06
這篇文章主要為大家詳細介紹了如何利用C#實現獲取本地磁盤目錄的功能，文中的示例代碼講解詳細，對我們學習C#有一定的幫助，感興趣的小伙伴可以跟隨小編一起了解一下2022-12-12
這篇文章主要介紹了c#判斷操作系統位數的示例，在.net 4.5中，判斷操作系統不用再寫方法去判斷了，有直接可以利用的屬性了哦2014-01-01
通過從unity內部函數中抽幾個出來改造，強制取某個裁切球的級聯陰影映射，通過案例給大家詳細介紹，文中給出了完整的urp shader代碼，對Unity級聯陰影知識感興趣的朋友一起看看吧2021-06-06
偶然發現C# 的計時器類Stopwatch,他特別適合測量運行時間,使用簡單、計時精確,下面就跟隨小編一起來學習一下它的具體應用吧2024-11-11
本文主要介紹了C#9.0中init訪問器的實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-05-05
本文詳細講解了C#使用讀寫鎖解決多線程并發問題，文中通過示例代碼介紹的非常詳細。對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2022-04-04
這篇文章主要為大家詳細介紹了Untiy Shader實現紋理貼圖滾動，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-03-03
這篇文章主要介紹了C#中獲取文件大小問題，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2023-02-02