Python實現功能完整的個人員管理程序
更新時間：2022年12月22日 11:24:34 作者：Vingun305
這篇文章主要介紹了Python實現功能完整的個人員管理程序，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習吧
一簡介
本軟件作用于人員管理，
1創建一個崗位管理界面，點擊崗位管理之后，設置好崗位名稱，拖動鼠標畫框，完成崗位創建，之后里面可以放置人員。
可以將之前建立的崗位刪除，同時里面的人員也會刪除。
2新增人員，包括（身份信息用不同顏色表示，崗位信息代表處于何種崗位）
3人員可以拖動到任意崗位，崗位也可以拖動到任意位置
4保存和讀取功能
如圖所示
管理崗位
新增人員
人員狀態管理
二 代碼部分
分兩次寫的，借鑒很多，語法較亂，基本都有標注
pydesigner生成的四個界面內，然后重寫按鍵類使其可以拖動
1.主代碼boy_main.py
# -*- coding:utf-8 -*-
import ast # 文本轉字典
import sys
from PyQt5.QtCore import Qt, QRect
from PyQt5.QtGui import QPainter, QPen
from PyQt5.QtWidgets import QApplication, QMainWindow, QVBoxLayout, QWidget # 布局的框體
from boy_ui_main import Ui_MainWindow # 導入第一個py，主窗口
from boy_ui_new import Ui_newboy # 導入第二個py，新增成員窗口
from manager_ui_gangwei import Ui_widget # 導入第三個py，崗位管理窗口
import button # 導入的第四個py，按鍵重寫，第四個窗口導入了這里
save_data_anjian = dict() # 需要保存的按鍵字典
save_data_layout = dict() # 需要保存的框體字典
# 主窗口
class MainWindow(QMainWindow, Ui_MainWindow): # 多重繼承QMainWindow和Ui_MainWindow
def __init__(self):
super(MainWindow, self).__init__() # 先調用父類QMainWindow的初始化方法
self.setupUi(self) # 再調用setupUi方法
self.newboyshow = newwindow_anjian() # 實例化新建成員窗口
self.newgangweishow = newwindow_gangwei() # 實例化管理崗位窗口
self.add_boy.triggered.connect(self.newshow) # 為增加人員按鈕添加打開新窗口的動作
self.saveaction.triggered.connect(self.savenow) # 為保存增加保存savedata的動作
self.openaction.triggered.connect(self.opennow) # 為打開增加打開savedata的動作
self.add_gangwei_huakuang.triggered.connect(self.manager_gangwei) # 為增加崗位增加管理崗位功能，可以畫了
self.setAcceptDrops(True) # 拖動按鍵用——人員
self.sig_huakuang = 0 # 畫框用,=0時不讓畫框
self.x0 = 0 # 畫框用
self.y0 = 0 # 畫框用
self.x1 = 0 # 畫框用
self.y1 = 0 # 畫框用
self.flag = False # # 畫框用,鼠標未按下
self.move = False # # 畫框用,存在移動
self.gangwei = 0 # 初始崗位設置
self.x_move = None#拖動崗位框體后的坐標
self.y_move = None#拖動崗位框體后的坐標
# 管理崗位頁面，在新崗位頁面設置完了崗位，點了確定，才能畫框
def manager_gangwei(self):
self.newgangweishow.show()
# 畫框用第一步---單擊鼠標觸發事件,初始左上角的點
def mousePressEvent(self, event):
# barHeight = self.bar.height()
self.x0 = event.pos().x()
self.y0 = event.pos().y()
self.flag = True
# 畫框用第二步--鼠標移動事件
def mouseMoveEvent(self, event):
# barHeight = self.bar.height()
self.move = True
if self.flag:
self.x1 = event.pos().x()
self.y1 = event.pos().y()
self.update()
# 畫框用第三步,只要拖動就會一直繪制事件
def paintEvent(self, event):
super().paintEvent(event)
painter = QPainter(self) # 拖動時候的臨時框
painter.setPen(QPen(Qt.green, 2, Qt.SolidLine))#畫筆設置
# 打開之后，再畫或者最大化以后才能出現，不知道為啥，對刷新不太了解
for rec in save_data_layout.values():#遍歷所有的框體，一直畫
painter.drawRect(QRect(rec[0], rec[1], rec[2], rec[3]))
if self.flag and self.move and self.sig_huakuang == 1: # 只有當鼠標按下并且移動狀態
rect = QRect(self.x0, self.y0, abs(self.x1 - self.x0), abs(self.y1 - self.y0))
painter.setPen(QPen(Qt.red, 2, Qt.SolidLine))
painter.drawRect(rect)
# 畫框用第四步--鼠標釋放事件，清零，并且不再繪制,self.sig_huakuang=0
def mouseReleaseEvent(self, event):
self.flag = False # 不再按下
self.move = False # 不再移動
self.x_move = event.pos().x() # 拖動崗位類的最終位置
self.y_move = event.pos().y() # 拖動崗位類的最終位置
# 釋放鼠標時儲存
if self.x1 and self.y1 and self.sig_huakuang == 1: # 不移動按了沒用,也就是有寬度和高度時
print("鼠標放下")
gangwei = self.gangwei # 框體的臨時名稱
rec = self.x0, self.y0, abs(self.x1 - self.x0), abs(self.y1 - self.y0) # 位置和大小
save_data_layout[gangwei] = rec # 保存這個框體的數據
# 同時建立一個布局和一個按鈕顯示布局信息
self.draw_rect(gangwei, rec) # 執行創建崗位命令
self.sig_huakuang = 0 # 使其不能再畫
# print("崗位狀態", button.Y.mouseMoveEvent(event),self.x1, self.y1,self.sig_huakuang)
# 如果有崗位按鍵，并且現在不讓畫框，并且按了左鍵拖動了：那么移動崗位和布局控件，修改存儲的數據，button.Y=目前的崗位框
if button.Y and self.sig_huakuang == 0 and button.U:
ganwgei = button.Y.text() # 從按鍵名字提取崗位信息
self.__dict__["pushButton" + ganwgei].move(self.x_move, self.y_move - 55) # 55，修改個位置
self.__dict__["gridLayoutWidget" + ganwgei].move(self.x_move, self.y_move - 30)
# 更改數據信息
# print(type(save_data_layout[ganwgei])) <class 'tuple'> 單個值沒法修改
xx = save_data_layout[ganwgei][2] # 只能更改字典值
yy = save_data_layout[ganwgei][3] # 只能更改字典值
save_data_layout[ganwgei] = (self.x_move, self.y_move, xx, yy) # 保存新的崗位信息
button.U = 0 # 設置完了就不能動了，除非再點按鈕
self.x0, self.y0, self.x1, self.y1 = (0, 0, 0, 0) # 鼠標重新設置
# 畫框體、按鍵、和布局.打開文件和創建時候用。同時增加人員崗位可選項
def draw_rect(self, gangwei, rec):
# print(rec[0], rec[1], rec[2], rec[3])#左上點和 寬。高self.centralwidget
self.__dict__["gridLayoutWidget" + gangwei] = QWidget(self.centralwidget) # 布局要放到個容器里
self.__dict__["gridLayoutWidget" + gangwei].setGeometry(QRect(rec[0], rec[1], rec[2], rec[3])) # 容器大小
# self.__dict__["gridLayoutWidget" + gangwei].setObjectName(gangwei)#控件名字
self.__dict__["layout" + gangwei] = QVBoxLayout() # 做個垂直布局
self.__dict__["layout" + gangwei].setContentsMargins(0, 0, 0, 0) # 上下左右不留縫隙
self.__dict__["gridLayoutWidget" + gangwei].setLayout(self.__dict__["layout" + gangwei]) # 容器使用這個垂直布局
self.__dict__["gridLayoutWidget" + gangwei].show() # 容器要顯示，少了這個麻煩了
# 按鈕顯示 同寬，往上50像素，高30像素
rectanjian = QRect(rec[0], rec[1] - 55, rec[2], 30)
self.__dict__["pushButton" + gangwei] = button.Buttongangwei(self.centralwidget, gangwei, rectanjian)
self.__dict__["pushButton" + gangwei].show()#按鍵顯示
# 增加了崗位，人員可以選
self.newboyshow.comboBox.addItems([gangwei])
# 增加了可以刪除的崗位
self.newgangweishow.comboBox.addItems([gangwei])
def newshow(self): # 打開新窗口的動作
self.newboyshow.show()
def savenow(self): # 保存的動作
file1 = open("boysavedata_anjian.txt", "w") # 保存按鍵
file1.write(str(save_data_anjian))
print("寫入成功按鍵", save_data_anjian)
file1.close()
file = open("boysavedata_layout.txt", "w") # 保存崗位框
file.write(str(save_data_layout))
print("寫入成功崗位", save_data_layout)
file.close()
def opennow(self): # 打開之前保存的數據
global save_data_anjian, save_data_layout
# 打開按鍵信息
with open("boysavedata_anjian.txt", "r") as file:
save_data_anjian = ast.literal_eval(file.read()) # 將讀取的字符串轉為字典
# print("按鍵信息", save_data_anjian)
# 打開崗位信息
with open("boysavedata_layout.txt", "r") as file1:
# print(file1.read())多加這一句話，捯飭半天，read以后就沒了，再讀就是空的，所以底下會報錯
save_data_layout = ast.literal_eval(file1.read()) # 將讀取的字符串轉為字典
#print("崗位信息", save_data_layout)
for gangwei, rec in save_data_layout.items(): # 提取名字和方塊
self.draw_rect(gangwei, rec) # 執行創建崗位命令
for name, shuxing in save_data_anjian.items(): # 提取名字和屬性，屬性0為身份，屬性1為崗位
self.setpushbutton(name, shuxing) # 按鍵加入到崗位
self.showMaximized() # 窗口最大化后才顯示，不知道為啥
def setpushbutton(self, name, shuxing): # 通過名字和屬性建立按鍵并歸位
# 點擊確定后新增按鍵,實例化按鍵，shuxing[0]=身份，shuxing[1]=崗位
buttonnew = button.Button(name, ui, shuxing[0], shuxing[1]) # 點擊確定后新增按鍵,實例化按鍵，shuxing[0]=身份
buttonnew.colorful() # 按鍵根據身份增加顏色，在button里新增的函數
buttonnew.move(100, 100)#如果最開始沒崗位，就移動到這個位置，可以沒有
buttonnew.show() # 按鍵顯示出來
for gangwei in save_data_layout.keys():
if gangwei == shuxing[1]:
self.__dict__["layout" + gangwei].addWidget(buttonnew) # 放置到新崗位
def dragEnterEvent(self, e): # 拖動用
e.accept()
# 定義了按鈕按下后和釋放后的行為，
# 獲得鼠標移動的位置，然后把人員按鍵放到這個地方，修改自身崗位并且保存下來
def dropEvent(self, e):
position = e.pos()
for gangwei, rec in save_data_layout.items():
if position in QRect(rec[0], rec[1], rec[2], rec[3]):
button.x.gangwei = gangwei # 設置新崗位
save_data_anjian[button.x.name][1] = button.x.gangwei # 保存新崗位
#print(f"新崗位為{save_data_anjian[button.x.name]}", gangwei)
self.__dict__["layout" + gangwei].addWidget(button.x) # button.X為拖動按鍵的本身，放置到新崗位
# 指定放下的動作類型為moveAction
e.setDropAction(Qt.MoveAction)
e.accept()
# 增加人員的新窗口
class newwindow_anjian(QWidget, Ui_newboy):
def __init__(self):
super(newwindow_anjian, self).__init__()
self.setupUi(self)
def addok(self): # 增加完人員，選擇確定時候
# global name,shenfen
name = self.lineEdit.text()
shenfen = self.comboBox_2.currentText()
zhiwu = self.comboBox.currentText()
shuxing = [shenfen, zhiwu]
save_data_anjian[name] = shuxing
ui.setpushbutton(name, shuxing) # 輸入名字和身份，建立按鍵
# 管理崗位的新窗口
class newwindow_gangwei(QWidget, Ui_widget):
def __init__(self):
super(newwindow_gangwei, self).__init__()
self.setupUi(self)
def del_gangwei_ok(self):#刪除崗位的按鍵動作
tex = self.comboBox.currentText() # 要刪除的崗位
# 讓這個三個不顯示
ui.__dict__["gridLayoutWidget" + tex].deleteLater()
ui.__dict__["layout" + tex].deleteLater()
ui.__dict__["pushButton" + tex].deleteLater()
# 讓這三個不存在
del ui.__dict__["gridLayoutWidget" + tex]
del ui.__dict__["layout" + tex]
del ui.__dict__["pushButton" + tex]
del save_data_layout[tex]
self.close() # 關閉本身窗口
def add_gangwei_ok(self):#增加崗位的按鍵
ui.sig_huakuang = 1#增加崗位后才能畫崗位
ui.gangwei = self.lineEdit.text()#增加的崗位的名字
self.close() # 關閉
if __name__ == '__main__':
app = QApplication(sys.argv)
ui = MainWindow()
ui.show()
sys.exit(app.exec_())2.button.py
import sys
from PyQt5.QtCore import Qt, QMimeData, QRect
from PyQt5.QtGui import QDrag, QIcon
from PyQt5.QtWidgets import QPushButton, QWidget, QApplication
from rightclickfrom import Ui_Rrightclickform#導入人員按鍵右鍵的窗口
x=0#按鍵自己本身
Y=0#崗位按鍵本身
U=0#控制崗位類拖動
#人員類按鍵
# 從 QPushButton 繼承一個 Button 類
class Button(QPushButton):
def __init__(self, name, parent,shenfen=0,gangwei=0):
super().__init__(name, parent)
self.name=name
self.shenfen=shenfen
self.gangwei=gangwei
self.newform = rightclict_window()#右鍵的畫面
def colorful(self):#增加按鍵顏色
if self.shenfen=="機器人":
self.setStyleSheet('''QPushButton{background:#76becc;border-radius:5px;}QPushButton:hover{background:yellow;}''')
elif self.shenfen=="軍火商":
self.setStyleSheet('''QPushButton{background:"#f7acbc";border-radius:5px;}QPushButton:hover{background:yellow;}''')
elif self.shenfen == "特種兵":
self.setStyleSheet('''QPushButton{background:"#f58220";border-radius:5px;}QPushButton:hover{background:yellow;}''')
elif self.shenfen == "電動車":
self.setStyleSheet('''QPushButton{background:"#4e72b8";border-radius:5px;}QPushButton:hover{background:yellow;}''')
else:pass
# 重構mouseMoveEvent方法
def mouseMoveEvent(self, e):
global x
x=self#取得按鍵本身
# 劫持按鈕的左鍵事件，右鍵的操作還是默認行為
if e.buttons() != Qt.LeftButton:
return
# 創建一個 QDrag 對象，用來傳輸MIME-based數據
mimeData = QMimeData()#這幾句沒看懂，照抄的
drag = QDrag(self)
drag.setMimeData(mimeData)
drag.setHotSpot(e.pos() - self.rect().topLeft())
# 拖放事件開始時，用到的處理函數式 start()
dropAction = drag.exec_(Qt.MoveAction)
# 重構mousePressEvent方法
# 右鍵點擊按鈕，彈出新窗口
def mousePressEvent(self, e):
global x
x=self
# 注意，我們在父級上也調用 了 mousePressEvent() 方法，
# 不然的話，我們是看不到按鈕按下的效果 的
super().mousePressEvent(e)
if e.button() == Qt.RightButton:
self.newform.show()#右鍵彈出畫面
#self.deleteLater()#刪除按鍵
#人員類按鍵打開的窗口
class rightclict_window(QWidget,Ui_Rrightclickform):
def __init__(self):
super(rightclict_window, self).__init__()
self.setupUi(self)
def delputbutton(self):#刪除按鍵
global x
print("del")
x.deleteLater()#刪除本按鍵
def jieok(self):
jiezou_sha=self.comboBoxjiezou.currentText()#借走了啥
sha_biaojia=self.comboBoxbiaoji.currentText()#做了哪些標記
print(jiezou_sha,sha_biaojia)
if jiezou_sha=="無":#如果沒接，不多顯示
x.setText(x.name)#清除標記
else:x.setText(x.name+jiezou_sha)#否則顯示借閱
if sha_biaojia=="無":#如果沒標記，清楚標記
x.setIcon(QIcon())
elif sha_biaojia=="休假":
x.setIcon(QIcon("櫻桃.png"))
elif sha_biaojia=="出差":
x.setIcon(QApplication.style().standardIcon(13))#增加系統自帶的ICON類圖標
else:pass
#崗位類按鍵
class Buttongangwei(QPushButton):
def __init__(self,parent, name,rect=QRect(0,0,0,0),):
super().__init__(parent) # 先調用父類Qpushbytton的初始化方法
#self.rect=rect
self.name=name
self.setGeometry(rect)
self.setObjectName(f"{self.name}")
self.setText(f"{self.name}")
#self.new_window_ganwgei = Ui_rightclick_gangwei_window() # 實例化一個右鍵的畫面
def mouseMoveEvent(self, e):
global Y,U
Y=self#取得按鍵本身
# 劫持按鈕的左鍵事件，右鍵的操作還是默認行為
if e.buttons() != Qt.LeftButton: #如果鼠標點擊事件發生了，不是左鍵就結束，是左鍵就繼續往下
return
print("左鍵拖動事件事件")
U=1#左鍵拖動了
# 重構mousePressEvent方法
# 右鍵點擊按鈕，彈出畫面——————未開發
def mousePressEvent(self, e):
global Y
Y=self
# 注意，我們在父級上也調用 了 mousePressEvent() 方法，
# 不然的話，我們是看不到按鈕按下的效果 的
if e.button() == Qt.RightButton:
pass
class Example(QWidget):
def __init__(self):
super().__init__()
self.initUI()
def initUI(self):
self.setAcceptDrops(True)
self.button = Buttongangwei(self,"mmap",QRect(100,100,100,100))
self.button.move(100,100)
self.button.show()
self.button4 = Button('Button1', self)
self.button4.move(159, 65)
#self.button.move(100, 65)
self.setWindowTitle('Click or Move')
self.setGeometry(300, 300, 280, 150)
def dragEnterEvent(self, e):
e.accept()
def delpushbotton(self):
pass
# 定義了按鈕按下后和釋放后的行為，
# 獲得鼠標移動的位置，然后把按鈕放到這個地方
def dropEvent(self, e):
position = e.pos()
print(self)
self.button.move(position)
# 指定放下的動作類型為moveAction
e.setDropAction(Qt.MoveAction)
e.accept()
if __name__ == '__main__':
app = QApplication(sys.argv)
ex = Example()
ex.show()
app.exec_()3.生成的主頁面ui的代碼，自動生成的打包用，不用看。boy_ui_main.py
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'boy_ui_main.ui'
#
# Created by: PyQt5 UI code generator 5.15.6
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_MainWindow(object):
def setupUi(self, MainWindow):
MainWindow.setObjectName("MainWindow")
MainWindow.resize(797, 566)
self.centralwidget = QtWidgets.QWidget(MainWindow)
self.centralwidget.setObjectName("centralwidget")
MainWindow.setCentralWidget(self.centralwidget)
self.menubar = QtWidgets.QMenuBar(MainWindow)
self.menubar.setGeometry(QtCore.QRect(0, 0, 797, 23))
self.menubar.setObjectName("menubar")
MainWindow.setMenuBar(self.menubar)
self.statusbar = QtWidgets.QStatusBar(MainWindow)
self.statusbar.setObjectName("statusbar")
MainWindow.setStatusBar(self.statusbar)
self.toolBar = QtWidgets.QToolBar(MainWindow)
self.toolBar.setObjectName("toolBar")
MainWindow.addToolBar(QtCore.Qt.TopToolBarArea, self.toolBar)
self.add_boy = QtWidgets.QAction(MainWindow)
self.add_boy.setObjectName("add_boy")
self.openaction = QtWidgets.QAction(MainWindow)
self.openaction.setObjectName("openaction")
self.saveaction = QtWidgets.QAction(MainWindow)
self.saveaction.setObjectName("saveaction")
self.add_gangwei_huakuang = QtWidgets.QAction(MainWindow)
self.add_gangwei_huakuang.setObjectName("add_gangwei_huakuang")
self.toolBar.addAction(self.openaction)
self.toolBar.addAction(self.saveaction)
self.toolBar.addAction(self.add_boy)
self.toolBar.addAction(self.add_gangwei_huakuang)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
_translate = QtCore.QCoreApplication.translate
MainWindow.setWindowTitle(_translate("MainWindow", "崗位管理1.0—QQ294794719"))
self.toolBar.setWindowTitle(_translate("MainWindow", "toolBar"))
self.add_boy.setText(_translate("MainWindow", "增加人員"))
self.add_boy.setToolTip(_translate("MainWindow", "增加成員"))
self.openaction.setText(_translate("MainWindow", "打開"))
self.openaction.setToolTip(_translate("MainWindow", "打開保存的文件"))
self.saveaction.setText(_translate("MainWindow", "保存"))
self.saveaction.setToolTip(_translate("MainWindow", "保存數據"))
self.add_gangwei_huakuang.setText(_translate("MainWindow", "崗位管理"))
self.add_gangwei_huakuang.setToolTip(_translate("MainWindow", "崗位管理"))4.生成增加成員的ui的代碼。boy_ui_new.py
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'boy_ui_new.ui'
#
# Created by: PyQt5 UI code generator 5.15.6
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_newboy(object):
def setupUi(self, newboy):
newboy.setObjectName("newboy")
newboy.resize(371, 137)
sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(newboy.sizePolicy().hasHeightForWidth())
newboy.setSizePolicy(sizePolicy)
self.layoutWidget = QtWidgets.QWidget(newboy)
self.layoutWidget.setGeometry(QtCore.QRect(10, 10, 351, 126))
self.layoutWidget.setObjectName("layoutWidget")
self.verticalLayout = QtWidgets.QVBoxLayout(self.layoutWidget)
self.verticalLayout.setContentsMargins(0, 0, 0, 0)
self.verticalLayout.setObjectName("verticalLayout")
self.horizontalLayout = QtWidgets.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
self.label = QtWidgets.QLabel(self.layoutWidget)
self.label.setObjectName("label")
self.horizontalLayout.addWidget(self.label)
self.lineEdit = QtWidgets.QLineEdit(self.layoutWidget)
sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.lineEdit.sizePolicy().hasHeightForWidth())
self.lineEdit.setSizePolicy(sizePolicy)
self.lineEdit.setText("")
self.lineEdit.setObjectName("lineEdit")
self.horizontalLayout.addWidget(self.lineEdit)
self.label_2 = QtWidgets.QLabel(self.layoutWidget)
self.label_2.setObjectName("label_2")
self.horizontalLayout.addWidget(self.label_2)
self.comboBox_2 = QtWidgets.QComboBox(self.layoutWidget)
self.comboBox_2.setObjectName("comboBox_2")
self.comboBox_2.addItem("")
self.comboBox_2.addItem("")
self.comboBox_2.addItem("")
self.comboBox_2.addItem("")
self.horizontalLayout.addWidget(self.comboBox_2)
self.label_3 = QtWidgets.QLabel(self.layoutWidget)
self.label_3.setObjectName("label_3")
self.horizontalLayout.addWidget(self.label_3)
self.comboBox = QtWidgets.QComboBox(self.layoutWidget)
self.comboBox.setObjectName("comboBox")
self.horizontalLayout.addWidget(self.comboBox)
self.verticalLayout.addLayout(self.horizontalLayout)
spacerItem = QtWidgets.QSpacerItem(334, 65, QtWidgets.QSizePolicy.Minimum, QtWidgets.QSizePolicy.Expanding)
self.verticalLayout.addItem(spacerItem)
self.horizontalLayout_2 = QtWidgets.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
self.pushButton = QtWidgets.QPushButton(self.layoutWidget)
self.pushButton.setObjectName("pushButton")
self.horizontalLayout_2.addWidget(self.pushButton)
self.pushButton_2 = QtWidgets.QPushButton(self.layoutWidget)
self.pushButton_2.setObjectName("pushButton_2")
self.horizontalLayout_2.addWidget(self.pushButton_2)
self.verticalLayout.addLayout(self.horizontalLayout_2)
self.retranslateUi(newboy)
self.pushButton.clicked.connect(newboy.addok) # type: ignore
self.pushButton_2.clicked.connect(newboy.close) # type: ignore
QtCore.QMetaObject.connectSlotsByName(newboy)
def retranslateUi(self, newboy):
_translate = QtCore.QCoreApplication.translate
newboy.setWindowTitle(_translate("newboy", "Form"))
self.label.setText(_translate("newboy", "姓名"))
self.label_2.setText(_translate("newboy", "身份"))
self.comboBox_2.setItemText(0, _translate("newboy", "機器人"))
self.comboBox_2.setItemText(1, _translate("newboy", "軍火商"))
self.comboBox_2.setItemText(2, _translate("newboy", "特種兵"))
self.comboBox_2.setItemText(3, _translate("newboy", "電動車"))
self.label_3.setText(_translate("newboy", "崗位"))
self.pushButton.setText(_translate("newboy", "確定"))
self.pushButton_2.setText(_translate("newboy", "取消"))5.生成管理成員的ui的代碼。rightclickfrom
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'rightclickfrom.ui'
#
# Created by: PyQt5 UI code generator 5.15.6
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_Rrightclickform(object):
def setupUi(self, Rrightclickform):
Rrightclickform.setObjectName("Rrightclickform")
Rrightclickform.resize(361, 256)
sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Fixed, QtWidgets.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(Rrightclickform.sizePolicy().hasHeightForWidth())
Rrightclickform.setSizePolicy(sizePolicy)
self.layoutWidget = QtWidgets.QWidget(Rrightclickform)
self.layoutWidget.setGeometry(QtCore.QRect(20, 10, 229, 176))
self.layoutWidget.setObjectName("layoutWidget")
self.verticalLayout = QtWidgets.QVBoxLayout(self.layoutWidget)
self.verticalLayout.setContentsMargins(0, 0, 0, 0)
self.verticalLayout.setObjectName("verticalLayout")
self.horizontalLayout = QtWidgets.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
self.label = QtWidgets.QLabel(self.layoutWidget)
self.label.setObjectName("label")
self.horizontalLayout.addWidget(self.label)
self.comboBoxjiezou = QtWidgets.QComboBox(self.layoutWidget)
self.comboBoxjiezou.setObjectName("comboBoxjiezou")
self.comboBoxjiezou.addItem("")
self.comboBoxjiezou.addItem("")
self.comboBoxjiezou.addItem("")
self.comboBoxjiezou.addItem("")
self.comboBoxjiezou.addItem("")
self.horizontalLayout.addWidget(self.comboBoxjiezou)
self.label_2 = QtWidgets.QLabel(self.layoutWidget)
self.label_2.setObjectName("label_2")
self.horizontalLayout.addWidget(self.label_2)
self.comboBoxbiaoji = QtWidgets.QComboBox(self.layoutWidget)
self.comboBoxbiaoji.setObjectName("comboBoxbiaoji")
self.comboBoxbiaoji.addItem("")
self.comboBoxbiaoji.addItem("")
self.comboBoxbiaoji.addItem("")
self.comboBoxbiaoji.addItem("")
self.horizontalLayout.addWidget(self.comboBoxbiaoji)
self.verticalLayout.addLayout(self.horizontalLayout)
spacerItem = QtWidgets.QSpacerItem(20, 40, QtWidgets.QSizePolicy.Minimum, QtWidgets.QSizePolicy.Expanding)
self.verticalLayout.addItem(spacerItem)
self.pushButton = QtWidgets.QPushButton(self.layoutWidget)
self.pushButton.setObjectName("pushButton")
self.verticalLayout.addWidget(self.pushButton)
spacerItem1 = QtWidgets.QSpacerItem(20, 40, QtWidgets.QSizePolicy.Minimum, QtWidgets.QSizePolicy.Expanding)
self.verticalLayout.addItem(spacerItem1)
self.horizontalLayout_2 = QtWidgets.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
self.pushButton_2 = QtWidgets.QPushButton(self.layoutWidget)
self.pushButton_2.setObjectName("pushButton_2")
self.horizontalLayout_2.addWidget(self.pushButton_2)
self.pushButton_3 = QtWidgets.QPushButton(self.layoutWidget)
self.pushButton_3.setObjectName("pushButton_3")
self.horizontalLayout_2.addWidget(self.pushButton_3)
self.verticalLayout.addLayout(self.horizontalLayout_2)
self.retranslateUi(Rrightclickform)
self.pushButton.clicked.connect(Rrightclickform.delputbutton) # type: ignore
self.pushButton_2.clicked.connect(Rrightclickform.jieok) # type: ignore
self.pushButton_3.clicked.connect(Rrightclickform.close) # type: ignore
self.pushButton.clicked.connect(Rrightclickform.close) # type: ignore
self.pushButton_2.clicked.connect(Rrightclickform.close) # type: ignore
QtCore.QMetaObject.connectSlotsByName(Rrightclickform)
def retranslateUi(self, Rrightclickform):
_translate = QtCore.QCoreApplication.translate
Rrightclickform.setWindowTitle(_translate("Rrightclickform", "人員狀態"))
self.label.setText(_translate("Rrightclickform", "借走"))
self.comboBoxjiezou.setItemText(0, _translate("Rrightclickform", "無"))
self.comboBoxjiezou.setItemText(1, _translate("Rrightclickform", "自行車1"))
self.comboBoxjiezou.setItemText(2, _translate("Rrightclickform", "籃球"))
self.comboBoxjiezou.setItemText(3, _translate("Rrightclickform", "庫房鑰匙東"))
self.comboBoxjiezou.setItemText(4, _translate("Rrightclickform", "新建項目"))
self.label_2.setText(_translate("Rrightclickform", "標記"))
self.comboBoxbiaoji.setItemText(0, _translate("Rrightclickform", "休假"))
self.comboBoxbiaoji.setItemText(1, _translate("Rrightclickform", "輪休"))
self.comboBoxbiaoji.setItemText(2, _translate("Rrightclickform", "醫院"))
self.comboBoxbiaoji.setItemText(3, _translate("Rrightclickform", "出差"))
self.pushButton.setText(_translate("Rrightclickform", "刪除按鈕?。?))
self.pushButton_2.setText(_translate("Rrightclickform", "確定"))
self.pushButton_3.setText(_translate("Rrightclickform", "取消"))6.生成管理崗位的ui的代碼。
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'manager_ui_gangwei.ui'
#
# Created by: PyQt5 UI code generator 5.15.6
#
# WARNING: Any manual changes made to this file will be lost when pyuic5 is
# run again. Do not edit this file unless you know what you are doing.
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_widget(object):
def setupUi(self, widget):
widget.setObjectName("widget")
widget.resize(443, 174)
self.gridLayout = QtWidgets.QGridLayout(widget)
self.gridLayout.setObjectName("gridLayout")
self.verticalLayout = QtWidgets.QVBoxLayout()
self.verticalLayout.setObjectName("verticalLayout")
self.horizontalLayout = QtWidgets.QHBoxLayout()
self.horizontalLayout.setObjectName("horizontalLayout")
self.label = QtWidgets.QLabel(widget)
self.label.setObjectName("label")
self.horizontalLayout.addWidget(self.label)
self.lineEdit = QtWidgets.QLineEdit(widget)
self.lineEdit.setObjectName("lineEdit")
self.horizontalLayout.addWidget(self.lineEdit)
self.pushButton = QtWidgets.QPushButton(widget)
self.pushButton.setObjectName("pushButton")
self.horizontalLayout.addWidget(self.pushButton)
self.verticalLayout.addLayout(self.horizontalLayout)
spacerItem = QtWidgets.QSpacerItem(20, 40, QtWidgets.QSizePolicy.Minimum, QtWidgets.QSizePolicy.Expanding)
self.verticalLayout.addItem(spacerItem)
self.horizontalLayout_2 = QtWidgets.QHBoxLayout()
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
self.label_2 = QtWidgets.QLabel(widget)
self.label_2.setObjectName("label_2")
self.horizontalLayout_2.addWidget(self.label_2)
self.comboBox = QtWidgets.QComboBox(widget)
self.comboBox.setObjectName("comboBox")
self.horizontalLayout_2.addWidget(self.comboBox)
self.pushButton_2 = QtWidgets.QPushButton(widget)
self.pushButton_2.setObjectName("pushButton_2")
self.horizontalLayout_2.addWidget(self.pushButton_2)
self.horizontalLayout_2.setStretch(0, 1)
self.horizontalLayout_2.setStretch(1, 2)
self.horizontalLayout_2.setStretch(2, 1)
self.verticalLayout.addLayout(self.horizontalLayout_2)
self.gridLayout.addLayout(self.verticalLayout, 0, 0, 1, 1)
self.retranslateUi(widget)
self.pushButton.clicked.connect(widget.add_gangwei_ok) # type: ignore
self.pushButton_2.clicked.connect(widget.del_gangwei_ok) # type: ignore
QtCore.QMetaObject.connectSlotsByName(widget)
def retranslateUi(self, widget):
_translate = QtCore.QCoreApplication.translate
widget.setWindowTitle(_translate("widget", "崗位管理"))
self.label.setText(_translate("widget", "新增崗位"))
self.pushButton.setText(_translate("widget", "確定"))
self.label_2.setText(_translate("widget", "刪除崗位"))
self.pushButton_2.setText(_translate("widget", "確定"))到此這篇關于Python實現功能完整的個人員管理程序的文章就介紹到這了,更多相關Python人員管理內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Python后臺開發Django會話控制的實現
這篇文章主要介紹了Python后臺開發Django會話控制的實現,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2019-04-04
這篇文章主要介紹了python之NAN和INF值處理方式，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2022-05-05
一文教你如何用Python輕輕松松操作Excel,Word,CSV
數據處理是 Python 的一大應用場景，而 Excel 又是當前最流行的數據處理軟件。本文將為大家詳細介紹一下如何用Python輕輕松松操作Excel、Word、CSV，需要的可以參考一下2022-02-02
這篇文章主要介紹了Python找出list中最常出現元素的方法,給出了三種常用的方法供大家對比參考,需要的朋友可以參考下2016-06-06
這篇文章主要介紹了?python中的flask框架Jinja?模板入門,Jinja?模板其實是?html?文件，一般情況下放在?Flask?工程的?/templates?目錄下，對python?flask?Jinja?模板相關知識感興趣的朋友一起看看吧2022-04-04
Python實現使用request模塊下載圖片demo示例
這篇文章主要介紹了Python實現使用request模塊下載圖片,結合完整實例形式分析了Python基于requests模塊的流傳輸文件下載操作相關實現技巧,需要的朋友可以參考下2019-05-05
這篇文章主要介紹了Python unittest工作原理和使用過程解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2020-02-02
這篇文章主要為大家詳細介紹了python中對列表的刪除和添加方法，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下，希望能夠給你帶來幫助2022-02-02
這篇文章主要介紹了Django的用戶模塊與權限系統的示例代碼，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2019-07-07
基于PyTorch實現EdgeCNN的實戰教程
本文我們將使用PyTorch來簡易實現一個EdgeCNN，不使用PyG庫，讓新手可以理解如何PyTorch來搭建一個簡易的圖網絡實例demo，感興趣的朋友跟隨小編一起看看吧2023-02-02