buildTypes {
        release {
            ndk{
                //"armeabi","armeabi-v7a","arm64-v8a","x86_64","x86"  //x86是兼容模擬器的
                abiFilters "armeabi","armeabi-v7a","arm64-v8a"  //手機沒什么x86框架的,只包含arm32和arm64即可
            }
        }
    }

/// 這里定義環境變量配置
class EnvironmentConfig {
  static const CHANNEL = String.fromEnvironment('CHANNEL');
  //DEBUG = Y 是調試模式，其他為生產模式
  static const DEBUG = String.fromEnvironment('DEBUG');
}

#獲取CHANNEL 參數值
String appMarket = EnvironmentConfig.CHANNEL；
#獲取DEBUG 參數值
String debug = EnvironmentConfig.DEBUG；

/// 獲取渠道參數使用,這里設置一下默認值
def dartEnvironmentVariables = [
        CHANNEL: 'YYB',
        DEBUG: '',
]
if (project.hasProperty('dart-defines')) {
    dartEnvironmentVariables = dartEnvironmentVariables + project.property('dart-defines')
            .split(',')
            .collectEntries { entry ->
                def pair = URLDecoder.decode(entry).split('=')
                [(pair.first()): pair.last()]
            }
}

//例子：打包APK時修改文件名帶上渠道參數，還有一些SDK也可以通過這種方式設置參數
//dartEnvironmentVariables.CHANNEL 使用參數
android{
   android.applicationVariants.all {
        variant ->
            variant.outputs.all {
                output ->
                    def outputFile = output.outputFile
                    if (outputFile.name.contains("release")) {
                        outputFileName = "APP_${getDateTime()}_${dartEnvironmentVariables.CHANNEL}.apk"
                    }
            }
    }
}

# 調試?yán)?：設置渠道為應用寶。
flutter run --dart-define=CHANNEL=YYB
# 調試?yán)?：設置渠道為應用寶。DEBUG參數是Y
flutter run --dart-define=CHANNEL=YYB --dart-define=DEBUG=Y
#打包例子1：打包應用寶渠道包
flutter build apk --dart-define=CHANNEL=YYB
#打包例子2：打包應用寶渠道包,DEBUG參數是Y
flutter build apk --dart-define=CHANNEL=YYB --dart-define=DEBUG=Y

#!/bin/sh
#---------------------必須修改：渠道數組----------------#
channels=(YYB HUAWEI MI OPPO VIVO)
#當前工程絕對路徑
project_path=$(pwd)
#安卓包product文件夾路徑
prod_path=${project_path}/prod/apk/
#Flutter打包生成的最初地址
release_path=${project_path}/build/app/outputs/apk/release/
clean_tips="執行flutter clean(默認:n) [ y/n ]"
echo $clean_tips
read  -t 5 is_clean
if [  ! -n "${is_clean}" ];then
    is_clean="n"
fi
while([[ $is_clean != "y" ]] && [[ $is_clean != "n" ]])
do
  echo "錯誤!只能輸入[ y/n ] ！??！"
  echo $clean_tips
  read is_clean
done
tips="請輸入選擇渠道(默認：0) [ ALL: 0 "
c_length=${#channels[@]};
for(( i=0; i<$c_length; i++)) do
  if (($i < $c_length-1 )); then
    tips="${tips}${channels[i]}: $((i+1)) "
  else
    tips="${tips}${channels[i]}: $((i+1)) ]"
  fi
done;
echo $tips
read  -t 5 number
if [  ! -n "${number}" ];then
    number=0
fi
while(( $number < "0" || $number > $c_length ))
do
  echo "錯誤!只能輸入0到${c_length} ！??！"
  echo $tips
  read number
done
#如果有product/apk文件夾則刪除，然后再創建一個空文件夾
if [ -d ${prod_path} ]; then
  rm -rf ${prod_path}
fi
#創建目錄
mkdir -p ${prod_path}
if [ ${is_clean} = "y" ];then
  echo "=============== 開始清理 ==============="
    flutter clean
fi
if (($number == 0 )); then
  echo "=============== 開始構建：全部渠道包 ==============="
  for(( i=0;i<${c_length};i++)) do
    echo "正在構建：${channels[$i]} 渠道包"
    flutter build apk --no-shrink --dart-define=CHANNEL=${channels[$i]}
    cp -R ${release_path}*.apk ${prod_path}
  done;
else
  echo "=============== 正在構建：${channels[$((number-1))]} 渠道包 ==============="
  flutter build apk --no-shrink --dart-define=CHANNEL=${channels[$((number-1))]}
  cp -R ${release_path}*.apk ${prod_path}
fi
#判斷apk目錄下是否有文件
if [ "$(ls -A $prod_path)" ]; then
  echo "=============== APK包已導出:$prod_path ==============="
  open $prod_path
else
  echo '=============== APK包導出失敗 ==============='
  exit 1
fi
exit 0

#!/bin/sh
#當前工程絕對路徑
project_path=$(pwd)
#xCode build 出來的APP文件有所優化，比Flutter build ios 的Runner.app要小
#------------------必須修改：XCODE工程導出路徑----------------#
runner_path=~/Library/Developer/Xcode/DerivedData/Runner-bsrdqyyshhsictbeoknvquvcxcsm/Build/Products/Release-iphoneos/Runner.app
#-------------------可選：自己的plist配置路徑------------------#
export_plist_path=${project_path}/shell/scriptTest.plist
#-------------------可選：修改為自己的APP名稱------------------#
app_name="APP名稱"
#----------------可選：將Runner替換成自己的工程名---------------#
project_name=Runner
#----------------可選：將Runner替換成自己的sheme名--------------#
scheme_name=Runner
#打包模式 Debug/Release
development_mode=Release
#導出.ipa文件所在路徑
ipa_path=${project_path}/prod/ipa/
#導出簽名.ipa文件所在路徑
sign_path=${ipa_path}/sign
#導出未簽名.ipa文件所在路徑
unsign_path=${ipa_path}/unsign
#導出未簽名.Payload文件所在路徑
payload_path=${unsign_path}/Payload
clean_tips="執行flutter clean(默認:n) [ y/n ]"
echo $clean_tips
read  -t 5 is_clean
if [  ! -n "${is_clean}" ];then
    is_clean="n"
fi
while([[ $is_clean != "y" ]] && [[ $is_clean != "n" ]])
do
  echo "錯誤!只能輸入[ y/n ] ?。。?
  echo $clean_tips
  read is_clean
done
echo "請輸入選擇模式(默認:0) [ UnSign: 0 AdHoc: 1 ] "
read  -t 5 number
if [  ! -n "${number}" ];then
    number=0
fi
while([[ $number != 0 ]] && [[ $number != 1 ]])
do
  echo "錯誤!只能輸入0或者1?。?！"
  echo "請輸入選擇模式? [ UnSign: 0 AdHoc: 1 ] "
  read number
done
if [ ${is_clean} = "y" ];then
  echo "=============== 開始清理 ==============="
    flutter clean
fi
echo "=============== 構建FLUTTER_IOS工程 ==============="
if [ $number == 0 ];then
  flutter build ios --release --no-codesign
else
  flutter build ios
fi
#flutter build ios --release --no-codesign --obfuscate --split-debug-info=./symbols
#如果有product/ipa文件夾則刪除，然后再創建一個空文件夾
if [ -d ${ipa_path} ]; then
  rm -rf ${ipa_path}
fi
#創建目錄
mkdir -p ${ipa_path}
#rm -rf ${ipa_path}
if [ $number == 0 ];then
  #無簽名打包
  echo "=============== 正在編譯XCODE工程:${development_mode} ==============="
  xcodebuild build -workspace ios/${project_name}.xcworkspace -scheme ${scheme_name} -configuration ${development_mode}
  mkdir -p ${payload_path}
  cp -r ${runner_path} ${payload_path}
  cd ${unsign_path}
  echo "=============== 讀取APP信息 ==============="
  #info.plist路徑
  info_plist="Payload/Runner.app/info.plist"
  version=$(/usr/libexec/PlistBuddy -c "Print CFBundleShortVersionString" "$info_plist")
  build=$(/usr/libexec/PlistBuddy -c "Print CFBundleVersion" "$info_plist")
  time=$(date "+%Y%m%d_%H%M")
  appName="$app_name""_v$version""_b$build""_$time.ipa"
  echo "=============== 優化Framework大小 ==============="
  xcrun bitcode_strip ${payload_path}/Runner.app/Frameworks/Flutter.framework/Flutter -r -o ${payload_path}/Runner.app/Frameworks/Flutter.framework/Flutter
  xcrun bitcode_strip ${payload_path}/Runner.app/Frameworks/AgoraRtcKit.framework/AgoraRtcKit -r -o ${payload_path}/Runner.app/Frameworks/AgoraRtcKit.framework/AgoraRtcKit
  xcrun bitcode_strip ${payload_path}/Runner.app/Frameworks/App.framework/App -r -o ${payload_path}/Runner.app/Frameworks/App.framework/App
  echo "=============== 生成IPA(壓縮Payload文件并修改文件名為IPA) ==============="
  zip -r ${appName} *
  if [ -e $unsign_path/$appName ]; then
    echo "=============== IPA包已導出:$unsign_path/$appName ==============="
    open $unsign_path
  else
    echo '=============== IPA包導出失敗 ==============='
    exit 1
  fi
else
  #Ad hoc 打包
  echo "=============== 正在編譯工程:${development_mode} ==============="
  xcodebuild \
  archive -workspace ${project_path}/ios/${project_name}.xcworkspace \
  -scheme ${scheme_name} \
  -configuration ${development_mode} \
  -archivePath ${ipa_path}/${project_name}.xcarchive  -quiet  || exit
  echo ''
  echo '=============== 開始IPA打包 ==============='
  xcodebuild -exportArchive -archivePath ${ipa_path}/${project_name}.xcarchive \
  -configuration ${development_mode} \
  -exportPath ${sign_path} \
  -exportOptionsPlist ${export_plist_path} \
  -quiet || exit
  if [ -e $sign_path/$app_name.ipa ]; then
    echo "=============== IPA包已導出:$sign_path/$app_name.ipa ==============="
    open $sign_path
  else
    echo '=============== IPA包導出失敗 ==============='
    exit 1
  fi
fi
exit 0

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>compileBitcode</key>
    <true/>
    <key>destination</key>
    <string>export</string>
    <key>method</key>
    <string>ad-hoc</string>
    <key>signingCertificate</key>
    <string>XXXXXXXX</string>
    <key>signingStyle</key>
    <string>automatic</string>
    <key>stripSwiftSymbols</key>
    <true/>
    <key>teamID</key>
    <string>XXXXXX</string>
    <key>thinning</key>
    <string>&lt;none&gt;</string>
</dict>
</plist>