// 獲取當前時間
	now := time.Now()

	// 當前時間的年、月、日、小時、分鐘、秒和納秒都可以通過現有接口直接獲取
	year := now.Year()
	month := now.Month()
	day := now.Day()
	hour := now.Hour()
	minute := now.Minute()
	second := now.Second()
	nanosecond := now.Nanosecond()

	// 當前時間的微秒和毫秒是通過納秒計算生成
	microsecond := nanosecond / 1e3
	millisecond := nanosecond / 1e6

	fmt.Println(now.Format("2006-01-02 15:04:05.000000000"))
	fmt.Println(year, month, day, hour, minute, second, nanosecond, microsecond, millisecond)

	// 獲取從1970經過的時間，秒和納秒都可以通過現有接口直接獲取
	sec := now.Unix()     // 時間戳位數為10
	ms := now.UnixMilli() // 時間戳位數為13
	us := now.UnixMicro() // 時間戳位數為16
	ns := now.UnixNano()  // 時間戳位數為19
	fmt.Printf("sec:%v\n ms:%v\n us:%v\n ns:%v\n", sec, ms, us, ns)

	// 時間間隔返回的是time.Duration，下面以1h1m1s1ms1us1ns的時間間隔舉例，測試各種格式的打印效果
	duration := 1*time.Hour + 1*time.Minute + 1*time.Second +
		1*time.Millisecond + 1*time.Microsecond + 1*time.Nanosecond
	// 直接使用%v打印，不轉換sec、ms或其他。
	fmt.Printf("duration:%v\n", duration)
	fmt.Printf("duration:%6v\n", duration)
	fmt.Printf("duration:%.6v\n", duration)
	fmt.Printf("duration:%.3v\n", duration)

	// duration支持Hours()、 Minutes()、Seconds() 和
	// Milliseconds()、Microseconds()、Nanoseconds()接口
	// 前三個接口返回類型為float64可以通過0.3f打印小數點后的數，
	// 后三個為int64，是整數，小數點后都是0
	// 下面列舉秒和毫秒的格式打印，其他時間單位可以參考秒和毫秒

	// 秒的打印格式%f可以打印小數點后9位，精確到納秒
	fmt.Printf("duration:%vsec\n", duration.Seconds())
	fmt.Printf("duration:%0.3fsec\n", duration.Seconds())
	fmt.Printf("duration:%0.6fsec\n", duration.Seconds())

	// 毫秒沒有小數點，都是整數，轉換成float后，小數點后都是0
	fmt.Printf("duration:%vms\n", duration.Milliseconds())
	fmt.Printf("duration:%.3dms\n", duration.Milliseconds())
	fmt.Printf("duration:%.3fms\n", float64(duration.Milliseconds()))
}

package main

import (
	"fmt"
	"time"
)

func main() {
	// 獲取當前時間
	now := time.Now()

	// 當前時間的年、月、日、小時、分鐘、秒和納秒都可以通過現有接口直接獲取
	year := now.Year()
	month := now.Month()
	day := now.Day()
	hour := now.Hour()
	minute := now.Minute()
	second := now.Second()
	nanosecond := now.Nanosecond()

	// 當前時間的微秒和毫秒是通過納秒計算生成
	microsecond := nanosecond / 1e3
	millisecond := nanosecond / 1e6

	fmt.Println(now.Format("2006-01-02 15:04:05.000000000"))
	fmt.Println(year, month, day, hour, minute, second, nanosecond, microsecond, millisecond)

	// 獲取從1970經過的時間，秒和納秒都可以通過現有接口直接獲取
	sec := now.Unix()     // 時間戳位數為10
	ms := now.UnixMilli() // 時間戳位數為13
	us := now.UnixMicro() // 時間戳位數為16
	ns := now.UnixNano()  // 時間戳位數為19
	fmt.Printf("sec:%v\n ms:%v\n us:%v\n ns:%v\n", sec, ms, us, ns)


	// 時間間隔返回的是time.Duration，下面以1h1m1s1ms1us1ns的時間間隔舉例，測試各種格式的打印效果
	duration := 1*time.Hour + 1*time.Minute + 1*time.Second +
		1*time.Millisecond + 1*time.Microsecond + 1*time.Nanosecond
	// 直接使用%v打印，不轉換sec、ms或其他。
	fmt.Printf("duration:%v\n", duration)
	fmt.Printf("duration:%6v\n", duration)
	fmt.Printf("duration:%.6v\n", duration)
	fmt.Printf("duration:%.3v\n", duration)

	// duration支持Hours()、 Minutes()、Seconds() 和
	// Milliseconds()、Microseconds()、Nanoseconds()接口
	// 前三個接口返回類型為float64可以通過0.3f打印小數點后的數，
	// 后三個為int64，是整數，小數點后都是0
	// 下面列舉秒和毫秒的格式打印，其他時間單位可以參考秒和毫秒

	// 秒的打印格式%f可以打印小數點后9位，精確到納秒
	fmt.Printf("duration:%vsec\n", duration.Seconds())
	fmt.Printf("duration:%0.3fsec\n", duration.Seconds())
	fmt.Printf("duration:%0.6fsec\n", duration.Seconds())

	// 毫秒沒有小數點，都是整數，轉換成float后，小數點后都是0
	fmt.Printf("duration:%vms\n", duration.Milliseconds())
	fmt.Printf("duration:%.3dms\n", duration.Milliseconds())
	fmt.Printf("duration:%.3fms\n", float64(duration.Milliseconds()))
}

// time.go

// Nanoseconds returns the duration as an integer nanosecond count.
func (d Duration) Nanoseconds() int64 { return int64(d) }

// Microseconds returns the duration as an integer microsecond count.
func (d Duration) Microseconds() int64 { return int64(d) / 1e3 }

// Milliseconds returns the duration as an integer millisecond count.
func (d Duration) Milliseconds() int64 { return int64(d) / 1e6 }

// These methods return float64 because the dominant
// use case is for printing a floating point number like 1.5s, and
// a truncation to integer would make them not useful in those cases.
// Splitting the integer and fraction ourselves guarantees that
// converting the returned float64 to an integer rounds the same
// way that a pure integer conversion would have, even in cases
// where, say, float64(d.Nanoseconds())/1e9 would have rounded
// differently.

// Seconds returns the duration as a floating point number of seconds.
func (d Duration) Seconds() float64 {
	sec := d / Second
	nsec := d % Second
	return float64(sec) + float64(nsec)/1e9
}

// Minutes returns the duration as a floating point number of minutes.
func (d Duration) Minutes() float64 {
	min := d / Minute
	nsec := d % Minute
	return float64(min) + float64(nsec)/(60*1e9)
}

// Hours returns the duration as a floating point number of hours.
func (d Duration) Hours() float64 {
	hour := d / Hour
	nsec := d % Hour
	return float64(hour) + float64(nsec)/(60*60*1e9)
}

func formatDemo() {
    now := time.Now()
    // 格式化的模板為Go的出生時間2006年1月2號15點04分 Mon Jan
    // 24小時制
    fmt.Println(now.Format("2006-01-02 15:04:05.000 Mon Jan"))
    // 12小時制
    fmt.Println(now.Format("2006-01-02 03:04:05.000 PM Mon Jan"))
    fmt.Println(now.Format("2006/01/02 15:04"))
    fmt.Println(now.Format("15:04 2006/01/02"))
    fmt.Println(now.Format("2006/01/02"))
}