C# wpf Canvas中實現控件拖動調整大小的示例

更新時間：2022年08月05日 09:14:31 作者：CodeOfCC

本文主要介紹了C# wpf Canvas中實現控件拖動調整大小的示例，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

前言

我們做圖片編輯工具、視頻編輯工具、或者畫板有時需要實現控件縮放功能，比如圖片或圖形可以拉伸放大或縮小，實現這種功能通常需要8個點，對應4條邊和4個角，在wpf中通常可以使用裝飾器實現。

一、功能說明

8個點方放置在控件的8個方位上，通過拖動這些點對控件進行拉伸或縮小，示意圖如下：

在這里插入圖片描述

二、如何實現？

1.繼承Adorner

通過裝飾器的方式添加8個點在控件上，這樣既可以不影響控件布局，又可以自由擺放8點控件。通過重寫方法，給裝飾添加控件。必要的重寫的方法如下面示例所示：

public class CanvasAdorner : Adorner
{
  //獲取裝飾器的元素個數
  protected override Visual GetVisualChild(int index);
  //指定裝飾器子元素個數
  protected override int VisualChildrenCount{get;}
  //布局，添加的子元素需要手動布局。
  protected override Size ArrangeOverride(Size finalSize);      
}

2.使用Thumb

因?yàn)門humb實現拖動比較容易，有相關事件獲取拖動距離。在裝飾器中定義8個Thumb，對應8個方位點。
示例代碼如下：

//4條邊
Thumb _leftThumb, _topThumb, _rightThumb, _bottomThumb;
//4個角
Thumb _lefTopThumb, _rightTopThumb, _rightBottomThumb, _leftbottomThumb;

初始化

 public CanvasAdorner(UIElement adornedElement) : base(adornedElement)
 {
     //初始化thumb
     _leftThumb = new Thumb();
     _leftThumb.HorizontalAlignment = HorizontalAlignment.Left;
     _leftThumb.VerticalAlignment = VerticalAlignment.Center;
     _leftThumb.Cursor = Cursors.SizeWE;
     //其他略...
}

3.實現拖動邏輯

在Thumb的DragDelta事件可以獲取拖動距離，根據八個方位的不同計算并修改控件的大小。

private void Thumb_DragDelta(object sender, DragDeltaEventArgs e)
{
//1.右側點HorizontalChange加寬
//2.左側點HorizontalChange減寬，加左移
//3.下側點VerticalChange加高
//4.上側點VerticalChange減高，加上移
}

三、完整代碼

代碼如下：

   public class CanvasAdorner : Adorner
    {
        //4條邊
        Thumb _leftThumb, _topThumb, _rightThumb, _bottomThumb;
        //4個角
        Thumb _lefTopThumb, _rightTopThumb, _rightBottomThumb, _leftbottomThumb;
        //布局容器，如果不使用布局容器，則需要給上述8個控件布局，實現和Grid布局定位是一樣的，會比較繁瑣且意義不大。
        Grid _grid;
        UIElement _adornedElement;
        public CanvasAdorner(UIElement adornedElement) : base(adornedElement)
        {
            _adornedElement = adornedElement;
            //初始化thumb
            _leftThumb = new Thumb();
            _leftThumb.HorizontalAlignment = HorizontalAlignment.Left;
            _leftThumb.VerticalAlignment = VerticalAlignment.Center;
            _leftThumb.Cursor = Cursors.SizeWE;
            _topThumb = new Thumb();
            _topThumb.HorizontalAlignment = HorizontalAlignment.Center;
            _topThumb.VerticalAlignment = VerticalAlignment.Top;
            _topThumb.Cursor = Cursors.SizeNS;
            _rightThumb = new Thumb();
            _rightThumb.HorizontalAlignment = HorizontalAlignment.Right;
            _rightThumb.VerticalAlignment = VerticalAlignment.Center;
            _rightThumb.Cursor = Cursors.SizeWE;
            _bottomThumb = new Thumb();
            _bottomThumb.HorizontalAlignment = HorizontalAlignment.Center;
            _bottomThumb.VerticalAlignment = VerticalAlignment.Bottom;
            _bottomThumb.Cursor = Cursors.SizeNS;
            _lefTopThumb = new Thumb();
            _lefTopThumb.HorizontalAlignment = HorizontalAlignment.Left;
            _lefTopThumb.VerticalAlignment = VerticalAlignment.Top;
            _lefTopThumb.Cursor = Cursors.SizeNWSE;
            _rightTopThumb = new Thumb();
            _rightTopThumb.HorizontalAlignment = HorizontalAlignment.Right;
            _rightTopThumb.VerticalAlignment = VerticalAlignment.Top;
            _rightTopThumb.Cursor = Cursors.SizeNESW;
            _rightBottomThumb = new Thumb();
            _rightBottomThumb.HorizontalAlignment = HorizontalAlignment.Right;
            _rightBottomThumb.VerticalAlignment = VerticalAlignment.Bottom;
            _rightBottomThumb.Cursor = Cursors.SizeNWSE;
            _leftbottomThumb = new Thumb();
            _leftbottomThumb.HorizontalAlignment = HorizontalAlignment.Left;
            _leftbottomThumb.VerticalAlignment = VerticalAlignment.Bottom;
            _leftbottomThumb.Cursor = Cursors.SizeNESW;
            _grid = new Grid();
            _grid.Children.Add(_leftThumb);
            _grid.Children.Add(_topThumb);
            _grid.Children.Add(_rightThumb);
            _grid.Children.Add(_bottomThumb);
            _grid.Children.Add(_lefTopThumb);
            _grid.Children.Add(_rightTopThumb);
            _grid.Children.Add(_rightBottomThumb);
            _grid.Children.Add(_leftbottomThumb);
            AddVisualChild(_grid);
            foreach (Thumb thumb in _grid.Children)
            {
                thumb.Width = 16;
                thumb.Height = 16;
                thumb.Background = Brushes.Green;
                thumb.Template = new ControlTemplate(typeof(Thumb))
                {
                    VisualTree = GetFactory(new SolidColorBrush(Colors.White))
                };
                thumb.DragDelta += Thumb_DragDelta;
            }
        }
        protected override Visual GetVisualChild(int index)
        {
            return _grid;
        }
        protected override int VisualChildrenCount
        {
            get
            {
                return 1;
            }
        }
        protected override Size ArrangeOverride(Size finalSize)
        {
            //直接給grid布局，grid內部的thumb會自動布局。
            _grid.Arrange(new Rect(new Point(-_leftThumb.Width / 2, -_leftThumb.Height / 2), new Size(finalSize.Width + _leftThumb.Width, finalSize.Height + _leftThumb.Height)));
            return finalSize;
        }
        //拖動邏輯
        private void Thumb_DragDelta(object sender, DragDeltaEventArgs e)
        {
            var c = _adornedElement as FrameworkElement;
            var thumb = sender as FrameworkElement;
            double left, top, width, height;
            if (thumb.HorizontalAlignment == HorizontalAlignment.Left)
            {

                left =double.IsNaN( Canvas.GetLeft(c))?0: Canvas.GetLeft(c) + e.HorizontalChange;
                width = c.Width - e.HorizontalChange;
            }
            else
            {
                left = Canvas.GetLeft(c);
                width = c.Width + e.HorizontalChange;
            }
            if (thumb.VerticalAlignment == VerticalAlignment.Top)
            {
                top = double.IsNaN(Canvas.GetTop(c)) ? 0 : Canvas.GetTop(c) + e.VerticalChange;
                height = c.Height - e.VerticalChange;
            }
            else
            {
                top = Canvas.GetTop(c);
                height = c.Height + e.VerticalChange;
            }
            if (thumb.HorizontalAlignment != HorizontalAlignment.Center)
            {
                if (width >= 0)
                {
                    Canvas.SetLeft(c, left);
                    c.Width = width;
                }
            }
            if (thumb.VerticalAlignment != VerticalAlignment.Center)
            {
                if (height >= 0)
                {
                    Canvas.SetTop(c, top);
                    c.Height = height;
                }
            }
        }
        //thumb的樣式
        FrameworkElementFactory GetFactory(Brush back)
        {
            var fef = new FrameworkElementFactory(typeof(Ellipse));
            fef.SetValue(Ellipse.FillProperty, back);
            fef.SetValue(Ellipse.StrokeProperty, new SolidColorBrush((Color)ColorConverter.ConvertFromString("#999999")));
            fef.SetValue(Ellipse.StrokeThicknessProperty, (double)2);
            return fef;
        }
    }

四、使用示例

示例代碼如下：
xaml

<Canvas Margin="20">
    <Border  x:Name="border"  Width="200" Height="200"  Background="Gray"  ></Border>
</Canvas>

在窗口或控件的Loaded事件中添加裝飾器：
cs

private void window_Loaded(object sender, RoutedEventArgs e)
{
    var layer = AdornerLayer.GetAdornerLayer(border);
    layer.Add(new CanvasAdorner(border));
}

效果預覽：

在這里插入圖片描述

總結

以上就是今天要講的內容，本文講述了控件縮放的方法與實現，都相對較簡單，尤其是實現也是特意精簡了代碼，比如布局直接使用Grid控件，拖動的邏輯也是較為簡化，最終呈現的效果還是比較不錯的。

到此這篇關于C# wpf Canvas中實現控件拖動調整大小的示例的文章就介紹到這了,更多相關C# wpf Canvas控件拖動調整大小內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: