使用Matlab繪制七夕咕呱小青蛙
更新時間：2022年08月03日 08:21:07 作者：slandarer
七夕節到了還不快給你的朋友安排上這只咕呱小青蛙？本文將用Matlab繪制一個可愛的咕呱小青蛙，感興趣的小伙伴可以動手嘗試一下
咕呱，咕呱，咕呱
咕呱，咕呱，咕呱
咕呱，咕呱，咕呱
七夕節到了還不快給你的朋友安排上這只咕呱小青蛙？
基礎代碼
function gugua
ax=gca;
ax.DataAspectRatio=[1 1 1];
ax.XLim=[-5 5];
ax.YLim=[-5 5];
ax.XColor='none';
ax.YColor='none';
ax.Color=[115,173,194]./255;
hold on
% hold(ax,'on')
% =========================================================================
% 繪制荷葉
[X,Y]=getEllipse([0.14,-1.5],3.6,1.8,0,200);
fill(X,Y,[166,211,177]./255,'EdgeColor',[41,47,50]./255,'LineWidth',4,'FaceAlpha',1)
fill([1.45,1.5,2.75],[-3.4,-2.4,-2.95],[115,173,194]./255,'EdgeColor','none')
plot([1.4,1.5,2.6],[-3.2,-2.4,-2.8],'Color',[41,47,50]./255,'LineWidth',4)
plot([-1.1,-0.8],[-3.2,-2.6],'Color',[51,57,50]./255,'LineWidth',2)
plot([-.6,-0.5],[-3.2,-2.9],'Color',[51,57,50]./255,'LineWidth',2)
plot([-3.3,-2.8],[-1.7,-1.63],'Color',[51,57,50]./255,'LineWidth',2)
% 繪制小草
[X,Y]=getEllipse([0,0],.62,.5,0,200);
Y=Y-.2;
X(Y<0)=[];Y(Y<0)=[];
X=[X,X(end:-1:1)];
Y=[Y,-Y(end:-1:1)];
[X1,Y1]=rotateData(X,Y,pi/8);X1=X1+.85;Y1=Y1+3.2;
[X2,Y2]=rotateData(X,Y,-pi/8);X2=X2-.15;Y2=Y2+3.2;
plot([.3,.33],[2.5,3],'Color',[41,47,50]./255,'LineWidth',4)
fill(X1,Y1,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
fill(X2,Y2,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
% 繪制腿部
[X,Y]=getEllipse([1.65,-1.5],.5,.2,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.55,-1.8],.4,.15,-pi/5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.28,-1.8],.4,.2,-pi/2.5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.8,-.6],1.3,.8,pi/6,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
%
[X,Y]=getEllipse([-1.55,-1.3],.5,.2,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.48,-1.6],.4,.15,pi/5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.18,-1.7],.4,.2,pi/2.5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.6,-.45],1.3,.8,-pi/6,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
% 繪制身體和肚子
[X,Y]=getEllipse([0.27,0.4],2.25,2.18,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',4,'FaceAlpha',1)
[X,Y]=getEllipse([0.18,-.48],1.05,.75,-pi/15,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',1.8,'FaceAlpha',1)
% 繪制眼睛
[X,Y]=getEllipse([-1.39,2.1],.88,.81,pi/7,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.9,1.98],.89,.81,-pi/7,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.28,2.1],.28,.28,0,200);
fill(X,Y,[41,47,50]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.82,2.0],.28,.28,0,200);
fill(X,Y,[41,47,50]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
X=0:.01:pi;Y=-sin(X);
X=X./3.9-.2;
Y=Y./6+1.65;
plot(X,Y,'Color',[41,47,50]./255,'LineWidth',2)
% =========================================================================
% 橢圓數據點生成函數
function [X,Y]=getEllipse(Mu,XR,YR,theta,pntNum)
% Mu | 中心點
% XR,YR | 旋轉前X,Y半軸長度
% theta | 旋轉角度
% pntNum | 生成數據點個數
tList=linspace(0,2*pi,pntNum);
X=cos(tList).*XR;
Y=sin(tList).*YR;
rotateMat=[cos(theta),-sin(theta);sin(theta),cos(theta)];
XY=rotateMat*[X;Y]+Mu(:);
X=XY(1,:);Y=XY(2,:);
end
% 數據旋轉角度
function [X,Y]=rotateData(X,Y,theta)
rotateMat=[cos(theta),-sin(theta);sin(theta),cos(theta)];
XY=rotateMat*[X;Y];
X=XY(1,:);Y=XY(2,:);
end
end
動圖生成代碼
function guguagif
ax=gca;
ax.DataAspectRatio=[1 1 1];
ax.XLim=[-5 5];
ax.YLim=[-5 5];
ax.XColor='none';
ax.YColor='none';
ax.Color=[115,173,194]./255;
hold on
DelayTime=.5;
pause(.5)
F=getframe(ax);
[imind,cm]=rgb2ind(F.cdata,256);
imwrite(imind,cm,'test.gif','gif','Loopcount',inf,'DelayTime',DelayTime);
% hold(ax,'on')
% =========================================================================
% 繪制荷葉
[X,Y]=getEllipse([0.14,-1.5],3.6,1.8,0,200);
fill(X,Y,[166,211,177]./255,'EdgeColor',[41,47,50]./255,'LineWidth',4,'FaceAlpha',1)
fill([1.45,1.5,2.75],[-3.4,-2.4,-2.95],[115,173,194]./255,'EdgeColor','none')
plot([1.4,1.5,2.6],[-3.2,-2.4,-2.8],'Color',[41,47,50]./255,'LineWidth',4)
plot([-1.1,-0.8],[-3.2,-2.6],'Color',[51,57,50]./255,'LineWidth',2)
plot([-.6,-0.5],[-3.2,-2.9],'Color',[51,57,50]./255,'LineWidth',2)
plot([-3.3,-2.8],[-1.7,-1.63],'Color',[51,57,50]./255,'LineWidth',2)
pause(.5);saveFrame()
% 繪制小草
[X,Y]=getEllipse([0,0],.62,.5,0,200);
Y=Y-.2;
X(Y<0)=[];Y(Y<0)=[];
X=[X,X(end:-1:1)];
Y=[Y,-Y(end:-1:1)];
[X1,Y1]=rotateData(X,Y,pi/8);X1=X1+.85;Y1=Y1+3.2;
[X2,Y2]=rotateData(X,Y,-pi/8);X2=X2-.15;Y2=Y2+3.2;
plot([.3,.33],[2.5,3],'Color',[41,47,50]./255,'LineWidth',4)
fill(X1,Y1,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
fill(X2,Y2,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
pause(.5);saveFrame()
% 繪制腿部
[X,Y]=getEllipse([1.65,-1.5],.5,.2,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.55,-1.8],.4,.15,-pi/5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.28,-1.8],.4,.2,-pi/2.5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.8,-.6],1.3,.8,pi/6,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
%
[X,Y]=getEllipse([-1.55,-1.3],.5,.2,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.48,-1.6],.4,.15,pi/5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.18,-1.7],.4,.2,pi/2.5,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.6,-.45],1.3,.8,-pi/6,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
pause(.5);saveFrame()
% 繪制身體和肚子
[X,Y]=getEllipse([0.27,0.4],2.25,2.18,0,200);
fill(X,Y,[185,215,108]./255,'EdgeColor',[41,47,50]./255,'LineWidth',4,'FaceAlpha',1)
[X,Y]=getEllipse([0.18,-.48],1.05,.75,-pi/15,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',1.8,'FaceAlpha',1)
pause(.5);saveFrame()
% 繪制眼睛
[X,Y]=getEllipse([-1.39,2.1],.88,.81,pi/7,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.9,1.98],.89,.81,-pi/7,200);
fill(X,Y,[253,241,155]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([-1.28,2.1],.28,.28,0,200);
fill(X,Y,[41,47,50]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
[X,Y]=getEllipse([1.82,2.0],.28,.28,0,200);
fill(X,Y,[41,47,50]./255,'EdgeColor',[41,47,50]./255,'LineWidth',2,'FaceAlpha',1)
X=0:.01:pi;Y=-sin(X);
X=X./3.9-.2;
Y=Y./6+1.65;
plot(X,Y,'Color',[41,47,50]./255,'LineWidth',2)
pause(.5);saveFrame()
% =========================================================================
% 橢圓數據點生成函數
function [X,Y]=getEllipse(Mu,XR,YR,theta,pntNum)
% Mu | 中心點
% XR,YR | 旋轉前X,Y半軸長度
% theta | 旋轉角度
% pntNum | 生成數據點個數
tList=linspace(0,2*pi,pntNum);
X=cos(tList).*XR;
Y=sin(tList).*YR;
rotateMat=[cos(theta),-sin(theta);sin(theta),cos(theta)];
XY=rotateMat*[X;Y]+Mu(:);
X=XY(1,:);Y=XY(2,:);
end
% 數據旋轉角度
function [X,Y]=rotateData(X,Y,theta)
rotateMat=[cos(theta),-sin(theta);sin(theta),cos(theta)];
XY=rotateMat*[X;Y];
X=XY(1,:);Y=XY(2,:);
end
function saveFrame
F=getframe(ax);
[imind,cm]=rgb2ind(F.cdata,256);
imwrite(imind,cm,'test.gif','gif','WriteMode','append','DelayTime',DelayTime);
end
end
到此這篇關于使用Matlab繪制七夕咕呱小青蛙的文章就介紹到這了,更多相關Matlab青蛙內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
list不同于其他容器，他是一個鏈表，物理地址并不連續。所以在實現list類的迭代器的時候，需要將迭代器單獨封裝到一個類里，因?yàn)樾枰剌d很多操作符來跟其他容器的迭代器使用達成一致2022-04-04
文章介紹了如何在DevC++中自定義頭文件并使用,首先創建一個項目,然后新建一個頭文件并編寫代碼,保存后創建一個源文件并將其放在項目目錄下2024-11-11
C++?std::chrono時間庫是C++標準庫提供的一個時間處理庫,提供了一個方便、靈活和精確的時間處理工具,下面小編就帶大家深入了解一下std::chrono時間庫的使用吧2023-10-10
詳解VS2010實現創建并生成動態鏈接庫dll的方法
在某些應用程序場景下，需要將一些類或者方法編譯成動態鏈接庫dll，以便別的.exe或者.dll文件可以通過第三方庫的方式進行調用，下面就簡單介紹一下如何通過VS2010來創建動態鏈接庫2022-12-12
這篇文章主要給大家介紹了關于C++中循環語句的用法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2022-05-05
c/c++中，函數可以傳遞的參數有三種形式,值、引用和指針。以下分別對這三種形式進行了介紹，需要的朋友可以過來參考下2013-07-07
C語言中feof函數和ferror函數示例詳解
在C語言中feof函數用于檢查文件流的結束標志,判斷文件在讀取時是否已經到達了文件的末尾,這篇文章主要給大家介紹了關于C語言中feof函數和ferror函數的相關資料,需要的朋友可以參考下2024-09-09
這篇文章主要介紹了淺談Qt QGraphics體系及刷新機制介紹,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-04-04
這篇文章主要介紹了C語言中qsort函數的用法實例詳解的相關資料,希望通過本文能幫助到大家，讓大家理解掌握這部分內容，需要的朋友可以參考下2021-08-08
C語言使用ffmpeg實現單線程異步的視頻播放器
這篇文章主要為大家詳細介紹了C語言如何使用ffmpeg實現單線程異步的視頻播放器功能，文中的示例代碼講解詳細，感興趣的小伙伴可以嘗試一下2022-12-12