python常用小腳本實例總結
更新時間：2022年07月07日 11:02:24 作者：特立獨行的貓a
在日常的工作中我們總會面臨到各式各樣的問題,下面這篇文章主要給大家介紹了關于python常用小腳本的相關資料,文中通過示例代碼介紹的非常詳細,需要的朋友可以參考下
前言
日常生活中常會遇到一些小任務，如果人工處理會很麻煩。
用python做些小腳本處理，能夠提高不少效率。或者可以把python當工具使用，輔助提高一下辦公效率。(比如我常拿python當計算器，計算和字符轉換用)
以下總結下個人用到的一些python小腳本留作備忘。
打印16進制字符串
用途：通信報文中的hex數據不好看，可以打印為16進制的字符串顯示出來。
#coding=utf-8
#name: myutil.py
def print_hex1(s,prev='0x'):
for c in s:
print '%s%02x' %(prev,ord(c)),
print
def print_hex(s):
for c in s:
print '%02x' %(ord(c)),
print
print 'myutil'
def print_hex3(s,prev='0x'):
i = 0
for c in s:
print '%s%s,' %(prev,s[i:i+2]),
i += 2
print
文件合并
之前搞單片機時生成的hex應用程序文件不能直接刷到單片機里，還需要把iap程序合并成一個文件才能燒寫到單片機。每次打包麻煩，做個腳本處理：
#path='C:\\Users\\test\\IAP_CZ_v204w.hex'
#file=open(path,'r')
#for ll in file.readlines()
# print ll
#coding=gb18030
import time
import os
def prr():
print 'file combination begin..'
path0=os.getcwd()
print path0
path=path0
#path1=path0
path2=path0
path+='\\IAP_CZ_v204w.hex'
#path1+='\\NC_armStaSystem.hex'
path2+='\\'
print path
s=raw_input('enter file path:')
path1=s
#path1+='\\NC_armStaSystem.hex'
print path1
s=raw_input('enter file name:')
path2+=s
path2+=time.strftime('_%y%m%d%H%M%S')
path2+='.hex'
print path2
prr()
try:
f1=open(path,'r')
count=0
for l in f1.readlines():
# print l
count+=1
#print count
f1.close()
f1=open(path,'r')
f2=open(path1,'r')
f3=open(path2,'w')
while(count>1):
l=f1.readline()
# print l
f3.write(l)
count-=1
# print count
f3.flush()
for l in f2.readlines():
f3.write(l)
f3.flush()
f3.close()
print 'combination success!'
except Exception,ex:
print 'excettion occured!'
print ex
s=raw_input('press any key to continue...')
finally:
f1.close()
f2.close()
s=raw_input('press any key to continue...')
多線程下載圖集
網上好看的動漫圖集，如果手工下載太費時了。簡單分析下網頁地址規律，寫個多線程腳本搞定。
#!/usr/bin/python
# -*- coding: utf-8 -*-
# filename: paxel.py
'''It is a multi-thread downloading tool
It was developed follow axel.
Author: volans
E-mail: volansw [at] gmail.com
'''
import sys
import os
import time
import urllib
from threading import Thread
local_proxies = {'http': 'http://131.139.58.200:8080'}
class AxelPython(Thread, urllib.FancyURLopener):
'''Multi-thread downloading class.
run() is a vitural method of Thread.
'''
def __init__(self, threadname, url, filename, ranges=0, proxies={}):
Thread.__init__(self, name=threadname)
urllib.FancyURLopener.__init__(self, proxies)
self.name = threadname
self.url = url
self.filename = filename
self.ranges = ranges
self.downloaded = 0
def run(self):
'''vertual function in Thread'''
try:
self.downloaded = os.path.getsize( self.filename )
except OSError:
#print 'never downloaded'
self.downloaded = 0
# rebuild start poind
self.startpoint = self.ranges[0] + self.downloaded
# This part is completed
if self.startpoint >= self.ranges[1]:
print 'Part %s has been downloaded over.' % self.filename
return
self.oneTimeSize = 16384 #16kByte/time
print 'task %s will download from %d to %d' % (self.name, self.startpoint, self.ranges[1])
self.addheader("Range", "bytes=%d-%d" % (self.startpoint, self.ranges[1]))
self.urlhandle = self.open( self.url )
data = self.urlhandle.read( self.oneTimeSize )
while data:
filehandle = open( self.filename, 'ab+' )
filehandle.write( data )
filehandle.close()
self.downloaded += len( data )
#print "%s" % (self.name)
#progress = u'\r...'
data = self.urlhandle.read( self.oneTimeSize )
def GetUrlFileSize(url, proxies={}):
urlHandler = urllib.urlopen( url, proxies=proxies )
headers = urlHandler.info().headers
length = 0
for header in headers:
if header.find('Length') != -1:
length = header.split(':')[-1].strip()
length = int(length)
return length
def SpliteBlocks(totalsize, blocknumber):
blocksize = totalsize/blocknumber
ranges = []
for i in range(0, blocknumber-1):
ranges.append((i*blocksize, i*blocksize +blocksize - 1))
ranges.append(( blocksize*(blocknumber-1), totalsize -1 ))
return ranges
def islive(tasks):
for task in tasks:
if task.isAlive():
return True
return False
def paxel(url, output, blocks=6, proxies=local_proxies):
''' paxel
'''
size = GetUrlFileSize( url, proxies )
ranges = SpliteBlocks( size, blocks )
threadname = [ "thread_%d" % i for i in range(0, blocks) ]
filename = [ "tmpfile_%d" % i for i in range(0, blocks) ]
tasks = []
for i in range(0,blocks):
task = AxelPython( threadname[i], url, filename[i], ranges[i] )
task.setDaemon( True )
task.start()
tasks.append( task )
time.sleep( 2 )
while islive(tasks):
downloaded = sum( [task.downloaded for task in tasks] )
process = downloaded/float(size)*100
show = u'\rFilesize:%d Downloaded:%d Completed:%.2f%%' % (size, downloaded, process)
sys.stdout.write(show)
sys.stdout.flush()
time.sleep( 0.5 )
filehandle = open( output, 'wb+' )
for i in filename:
f = open( i, 'rb' )
filehandle.write( f.read() )
f.close()
try:
os.remove(i)
pass
except:
pass
filehandle.close()
if __name__ == '__main__':
url = "http://xz1.mm667.com/xz84/images/001.jpg"
output = '001.jpg'
paxel( url, output, blocks=4, proxies={} )
多線程下載圖片
多線程下載圖片并存儲到指定目錄中，若目錄不存在則自動創建。
# -*- coding: UTF-8 -*-
'''
import re
import urllib
urls='http://xz5.mm667.com/xz82/images/01.jpg'
def getHtml(url):
page = urllib.urlopen(url)
html = page.read()
return html
def getImg(html):
reg = r'src="(.+?\.jpg)" pic_ext'
imgre = re.compile(reg)
imglist = imgre.findall(html)
x = 0
for imgurl in imglist:
urllib.urlretrieve(imgurl,'%s.jpg' % x)
x = x + 1
html = getHtml("http://tieba.baidu.com/p/2460150866")
getImg(html)
'''
import re
import urllib
import threading
import time
import socket
socket.setdefaulttimeout(30)
urls=[]
j=0
for i in xrange(1,81):
if (i-1)%4 == 0:
j += 1
if ((j-1)%5) == 0 :
j=1
site='http://xz%d.mm667.com/xz%02d/images/' %(j,i)
urls.append(site)
print urls[i-1]
#print urls
'''
urls.append('http://xz1.mm667.com/xz01/images/')
urls.append('http://xz1.mm667.com/xz02/images/')
urls.append('http://xz1.mm667.com/xz03/images/')
urls.append('http://xz1.mm667.com/xz04/images/')
urls.append('http://xz1.mm667.com/xz84/images/')
urls.append('http://xz2.mm667.com/xz85/images/')
urls.append('http://xz3.mm667.com/xz86/images/')
urls.append('http://xz1.mm667.com/s/')
urls.append('http://xz1.mm667.com/p/')
'''
def mkdir(path):
# 引入模塊
import os
# 去除首位空格
path=path.strip()
# 去除尾部 \ 符號
path=path.rstrip("\\")
# 判斷路徑是否存在
# 存在 True
# 不存在 False
isExists=os.path.exists(path)
# 判斷結果
if not isExists:
# 如果不存在則創建目錄
print path+u' 創建成功'
# 創建目錄操作函數
os.makedirs(path)
return True
else:
# 如果目錄存在則不創建，并提示目錄已存在
print path+u' 目錄已存在'
return False
def cbk(a,b,c):
'''''回調函數
@a: 已經下載的數據塊
@b: 數據塊的大小
@c: 遠程文件的大小
'''
per = 100.0 * a * b / c
if per > 100:
per = 100
print '%.2f%%' % per
#url = 'http://www.sina.com.cn'
local = 'd:\\mysite\\pic1\\'
d=0
mutex = threading.Lock()
# mutex1 = threading.Lock()
class MyThread(threading.Thread):
def __init__(self, url, name):
threading.Thread.__init__(self)
self.url=url
self.name=name
def run(self):
mutex.acquire()
print
print 'down from %s' % self.url
time.sleep(1)
mutex.release()
try:
urllib.urlretrieve(self.url, self.name)
except Exception,e:
print e
time.sleep(1)
urllib.urlretrieve(self.url, self.name)
threads=[]
for u in urls[84:]:
d += 1
local = 'd:\\mysite\\pic1\\%d\\' %d
mkdir(local)
print 'download begin...'
for i in xrange(40):
lcal = local
url=u
url += '%03d.jpg' %i
lcal += '%03d.jpg' %i
th = MyThread(url,lcal)
threads.append(th)
th.start()
# for t in threads:
# t.join()
print 'over! download finished'
爬蟲抓取信息
#!/usr/bin/env python
# -*- coding:utf-8 -*-
"""
Python爬蟲,抓取一卡通相關企業信息
Anthor: yangyongzhen
Version: 0.0.2
Date: 2014-12-14
Language: Python2.7.5
Editor: Sublime Text2
"""
import urllib2, re, string
import threading, Queue, time
import sys
import os
from bs4 import BeautifulSoup
#from pprint import pprint
reload(sys)
sys.setdefaultencoding('utf8')
_DATA = []
FILE_LOCK = threading.Lock()
SHARE_Q = Queue.Queue() #構造一個不限制大小的的隊列
_WORKER_THREAD_NUM = 3 #設置線程的個數
_Num = 0 #總條數
class MyThread(threading.Thread) :
def __init__(self, func,num) :
super(MyThread, self).__init__() #調用父類的構造函數
self.func = func #傳入線程函數邏輯
self.thread_num = num
def run(self) :
self.func()
#print u'線程ID:',self.thread_num
def worker() :
global SHARE_Q
while not SHARE_Q.empty():
url = SHARE_Q.get() #獲得任務
my_page = get_page(url)
find_data(my_page) #獲得當前頁面的數據
#write_into_file(temp_data)
time.sleep(1)
SHARE_Q.task_done()
def get_page(url) :
"""
根據所給的url爬取網頁HTML
Args:
url: 表示當前要爬取頁面的url
Returns:
返回抓取到整個頁面的HTML(unicode編碼)
Raises:
URLError:url引發的異常
"""
try :
html = urllib2.urlopen(url).read()
my_page = html.decode("gbk",'ignore')
#my_page = unicode(html,'utf-8','ignore').encode('utf-8','ignore')
#my_page = urllib2.urlopen(url).read().decode("utf8")
except urllib2.URLError, e :
if hasattr(e, "code"):
print "The server couldn't fulfill the request."
print "Error code: %s" % e.code
elif hasattr(e, "reason"):
print "We failed to reach a server. Please check your url and read the Reason"
print "Reason: %s" % e.reason
return my_page
def find_data(my_page) :
"""
通過返回的整個網頁HTML, 正則匹配名稱
Args:
my_page: 傳入頁面的HTML文本用于正則匹配
"""
global _Num
temp_data = []
items = BeautifulSoup(my_page).find_all("div", style="width:96%;margin:10px;border-bottom:1px #CCC dashed;padding-bottom:10px;")
for index, item in enumerate(items) :
#print item
#print item.h1
#print h.group()
#temp_data.append(item)
#print item.find(re.compile("^a"))
href = item.find(re.compile("^a"))
#soup = BeautifulSoup(item)
#公司名稱
if item.a:
data = item.a.string.encode("gbk","ignore")
print data
temp_data.append(data)
goods = item.find_all("div", style="font-size:12px;")
#經營產品與聯系方式
for i in goods:
data = i.get_text().encode("gbk","ignore")
temp_data.append(data)
print data
#b = item.find_all("b")
#print b
#鏈接地址
pat = re.compile(r'href="([^"]*)"')
h = pat.search(str(item))
if h:
#print h.group(0)
href = h.group(1)
print href
temp_data.append(h.group(1))
_Num += 1
#b = item.find_all(text=re.compile("Dormouse"))
#pprint(goods)
#print href
#pat = re.compile(r'title="([^"]*)"')
#h = pat.search(str(href))
#if h:
#print h.group(1)
#temp_data.append(h.group(1))
_DATA.append(temp_data)
#headers = {'User-Agent':"Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/22.0.1207.1 Safari/537.1"}##瀏覽器請求頭（大部分網站沒有這個請求頭會報錯、請務必加上哦）
#all_url = 'http://www.mzitu.com/all' ##開始的URL地址
#start_html = requests.get(all_url, headers=headers) ##使用requests中的get方法來獲取all_url(就是：http://www.mzitu.com/all這個地址)的內容 headers為上面設置的請求頭、請務必參考requests官方文檔解釋
#print(start_html.text) ##打印出start_html (請注意，concent是二進制的數據，一般用于下載圖片、視頻、音頻、等多媒體內容是才使用concent, 對于打印網頁內容請使用text)
def main() :
global SHARE_Q
threads = []
start = time.clock()
douban_url = "http://company.yktworld.com/comapny_search.asp?page={page}"
#向隊列中放入任務, 真正使用時, 應該設置為可持續的放入任務
for index in xrange(20) :
SHARE_Q.put(douban_url.format(page = index * 1))
for i in xrange(_WORKER_THREAD_NUM) :
thread = MyThread(worker,i)
thread.start() #線程開始處理任務
threads.append(thread)
for thread in threads :
thread.join()
SHARE_Q.join()
i = 0
with open("down.txt", "w+") as my_file :
for page in _DATA :
i += 1
for name in page:
my_file.write(name + "\n")
print "Spider Successful!!!"
end = time.clock()
print u'抓取完成！'
print u'總頁數:',i
print u'總條數:',_Num
print u'一共用時：',end-start,u'秒'
if __name__ == '__main__':
main()
爬蟲多線程下載電影名稱
#!/usr/bin/env python
# -*- coding:utf-8 -*-
"""
Python爬蟲
Anthor: yangyongzhen
Version: 0.0.2
Date: 2014-12-14
Language: Python2.7.8
Editor: Sublime Text2
"""
import urllib2, re, string
import threading, Queue, time
import sys
import os
from bs4 import BeautifulSoup
reload(sys)
sys.setdefaultencoding('utf8')
_DATA = []
FILE_LOCK = threading.Lock()
SHARE_Q = Queue.Queue() #構造一個不限制大小的的隊列
_WORKER_THREAD_NUM = 3 #設置線程的個數
rootpath = os.getcwd()+u'/抓取的內容/'
def makedir(path):
if not os.path.isdir(path):
os.makedirs(path)
#創建抓取的根目錄
#makedir(rootpath)
#顯示下載進度
def Schedule(a,b,c):
'''''
a:已經下載的數據塊
b:數據塊的大小
c:遠程文件的大小
'''
per = 100.0 * a * b / c
if per > 100 :
per = 100
print '%.2f%%' % per
class MyThread(threading.Thread) :
def __init__(self, func) :
super(MyThread, self).__init__() #調用父類的構造函數
self.func = func #傳入線程函數邏輯
def run(self) :
self.func()
def worker() :
print 'work thread start...\n'
global SHARE_Q
while not SHARE_Q.empty():
url = SHARE_Q.get() #獲得任務
my_page = get_page(url)
find_title(my_page) #獲得當前頁面的電影名
#write_into_file(temp_data)
time.sleep(1)
SHARE_Q.task_done()
def get_page(url) :
"""
根據所給的url爬取網頁HTML
Args:
url: 表示當前要爬取頁面的url
Returns:
返回抓取到整個頁面的HTML(unicode編碼)
Raises:
URLError:url引發的異常
"""
try :
html = urllib2.urlopen(url).read()
my_page = html.decode("utf8")
#my_page = unicode(html,'utf-8','ignore').encode('utf-8','ignore')
#my_page = urllib2.urlopen(url).read().decode("utf8")
except urllib2.URLError, e :
if hasattr(e, "code"):
print "The server couldn't fulfill the request."
print "Error code: %s" % e.code
elif hasattr(e, "reason"):
print "We failed to reach a server. Please check your url and read the Reason"
print "Reason: %s" % e.reason
return my_page
def find_title(my_page) :
"""
通過返回的整個網頁HTML, 正則匹配前100的電影名稱
Args:
my_page: 傳入頁面的HTML文本用于正則匹配
"""
temp_data = []
movie_items = BeautifulSoup(my_page).findAll('h1')
for index, item in enumerate(movie_items) :
#print item
#print item.h1
pat = re.compile(r'href="([^"]*)"')
h = pat.search(str(item))
if h:
#print h.group(0)
href = h.group(1)
print href
temp_data.append(h.group(1))
#print h.group()
#temp_data.append(item)
#print item.find(re.compile("^a"))
href = item.find(re.compile("^a"))
#soup = BeautifulSoup(item)
if item.a:
#print item.a.string
temp_data.append(item.a.string)
#print href
#pat = re.compile(r'title="([^"]*)"')
#h = pat.search(str(href))
#if h:
#print h.group(1)
#temp_data.append(h.group(1))
_DATA.append(temp_data)
def main() :
global SHARE_Q
threads = []
start = time.clock()
douban_url = "http://movie.misszm.com/page/{page}"
#向隊列中放入任務, 真正使用時, 應該設置為可持續的放入任務
for index in xrange(5) :
SHARE_Q.put(douban_url.format(page = index * 1))
for i in xrange(_WORKER_THREAD_NUM) :
thread = MyThread(worker)
thread.start() #線程開始處理任務
threads.append(thread)
for thread in threads :
thread.join()
SHARE_Q.join()
with open("movie.txt", "w+") as my_file :
for page in _DATA :
for movie_name in page:
my_file.write(movie_name + "\n")
print "Spider Successful!!!"
end = time.clock()
print u'抓取完成！'
print u'一共用時：',end-start,u'秒'
if __name__ == '__main__':
main()
串口轉tcp工具
#coding=utf-8
#author:yangyongzhen
#QQ:534117529
#'CardTest TcpServer - Simple Test Card Tool 1.00'
import sys,threading,time;
import serial;
import binascii,encodings;
import re;
import os;
from socket import *
from struct import *;
#from myutil import *;
#name: myutil.py
mylock = threading.RLock()
Server_IP = ''
Srever_Port = ''
def print_hex1(s,prev='0x'):
for c in s:
print '%s%02x' %(prev,ord(c)),
print
def print_hex(s):
for c in s:
print '%02x' %(ord(c)),
print
def hexto_str(s):
r =''
for c in s:
r += '%02x' %(ord(c))
return r
def strto_hex(s):
r = s.decode('hex')
return r
#''代表服務器為localhost
#在一個非保留端口號上進行監聽
class ComThread:
def __init__(self, Port=0):
self.l_serial = None;
self.alive = False;
self.waitEnd = None;
self.port = Port;
#TCP部分
#self.sockobj = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.connection = None
#數據
self.snddata = ''
self.rcvdata = ''
def waiting(self):
if not self.waitEnd is None:
self.waitEnd.wait();
def SetStopEvent(self):
if not self.waitEnd is None:
self.waitEnd.set();
self.alive = False;
self.stop();
def start(self):
self.l_serial = serial.Serial();
self.l_serial.port = self.port;
self.l_serial.baudrate = 115200;
self.l_serial.timeout = 2; #秒
self.l_serial.open();
if self.l_serial.isOpen():
self.waitEnd = threading.Event();
self.alive = True;
print 'open serial port %d ok!\n' %(self.port+1)
print 'baudrate:115200 \n'
self.thread_read = None;
self.thread_read = threading.Thread(target=self.FirstReader);
self.thread_read.setDaemon(1);
self.thread_read.start();
self.thread_write = None;
self.thread_write = threading.Thread(target=self.FirstWriter);
self.thread_write.setDaemon(1);
self.thread_write.start();
#TCP部分
self.thread_TcpClient = None;
self.thread_TcpClient = threading.Thread(target=self.TcpClient);
self.thread_TcpClient.setDaemon(1);
self.thread_TcpClient.start();
self.thread_TcpSend = None;
self.thread_TcpSend = threading.Thread(target=self.TcpSend);
self.thread_TcpSend.setDaemon(1);
self.thread_TcpSend.start();
return True;
else:
return False;
def FirstReader(self):
while self.alive:
# 接收間隔
time.sleep(0.1);
try:
data = '';
n = self.l_serial.inWaiting();
if n:
data = data+self.l_serial.read(n);
#for l in xrange(len(data)):
#print '%02X' % ord(data[l]),
# 發送數據
print u'->請求:'
print data;
mylock.acquire()
self.snddata = data
mylock.release()
#print_hex(data);
# 判斷結束
except Exception, ex:
print str(ex);
self.waitEnd.set();
self.alive = False;
def FirstWriter(self):
while self.alive:
# 接收間隔
time.sleep(0.1);
try:
#snddata = raw_input('\nenter data send:\n')
if self.rcvdata!='':
self.l_serial.write(self.rcvdata);
print u'-<應答:'
print self.rcvdata;
mylock.acquire()
self.rcvdata = '';
mylock.release()
#print_hex(snddata);
except Exception, ex:
print str(ex);
self.waitEnd.set();
self.alive = False;
def TcpClient(self):
while True:
# 接收間隔
time.sleep(0.1);
self.connection = socket(AF_INET, SOCK_STREAM);
self.connection.connect((Server_IP, int(Server_Port)));
print 'Connect to Server OK!';
self.snddata = ''
self.rcvdata = ''
while True:
#讀取客戶端套接字的下一行
data = self.connection.recv(1024)
#如果沒有數量的話，那么跳出循環
if not data: break
#發送一個回復至客戶端
mylock.acquire()
self.snddata = ''
self.rcvdata = data
mylock.release()
#connection.send('Echo=>' + data)
self.connection.close()
self.waitEnd.set();
self.alive = False;
def TcpSend(self):
while True:
# 接收間隔
time.sleep(0.1);
while True:
time.sleep(0.1);
try:
if not self.connection is None:
if self.snddata != '':
self.connection.send(self.snddata)
mylock.acquire()
self.rcvdata = ''
self.snddata = ''
mylock.release()
except Exception, ex:
pass
def stop(self):
self.alive = False;
self.thread_read.join();
if self.l_serial.isOpen():
self.l_serial.close();
#測試用部分
if __name__ == '__main__':
print 'Serial to Tcp Tool 1.00\n'
print 'Author:yangyongzhen\n'
print 'QQ:534117529\n'
print 'Copyright (c) **cap 2015-2016.\n'
Server_IP = raw_input('please enter ServerIP:')
print 'Server_IP: %s' %(Server_IP)
Server_Port = raw_input('please enter ServerPort:')
print 'Server_Port: %s' %(Server_Port)
com =raw_input('please enter com port(1-9):')
rt = ComThread(int(com)-1);
try:
if rt.start():
rt.waiting();
rt.stop();
else:
pass;
except Exception,se:
print str(se);
if rt.alive:
rt.stop();
os.system("pause")
print '';
print 'End OK .';
del rt;
遠程讀卡器server端
很早之前做過一個遠程讀卡器工具，原理就是在現場客服電腦上裝個python做的tcpserver服務端，操控現場的讀卡器。在公司內部做個客戶端連接過去，這樣實現在公司調試現場的卡片業務。
這個就是服務端工具的實現：
#coding=utf-8
#author:yangyongzhen
#QQ:534117529
#'CardTest TcpServer - Simple Test Card Tool 1.00'
import sys,threading,time;
import serial;
import binascii,encodings;
import re;
import os;
from socket import *
from struct import *;
#from myutil import *;
#name: myutil.py
mylock = threading.RLock()
def print_hex1(s,prev='0x'):
for c in s:
print '%s%02x' %(prev,ord(c)),
print
def print_hex(s):
for c in s:
print '%02x' %(ord(c)),
print
def hexto_str(s):
r =''
for c in s:
r += '%02x' %(ord(c))
return r
def strto_hex(s):
r = s.decode('hex')
return r
#''代表服務器為localhost
#在一個非保留端口號上進行監聽
class ComThread:
def __init__(self, Port=0):
self.l_serial = None;
self.alive = False;
self.waitEnd = None;
self.port = Port;
#TCP部分
self.myHost = ''
self.myPort = 5050
self.sockobj = socket(AF_INET, SOCK_STREAM)
self.connection = None
#數據
self.snddata = ''
self.rcvdata = ''
def waiting(self):
if not self.waitEnd is None:
self.waitEnd.wait();
def SetStopEvent(self):
if not self.waitEnd is None:
self.waitEnd.set();
self.alive = False;
self.stop();
def start(self):
self.l_serial = serial.Serial();
self.l_serial.port = self.port;
self.l_serial.baudrate = 115200;
self.l_serial.timeout = 2; #秒
self.l_serial.open();
if self.l_serial.isOpen():
self.waitEnd = threading.Event();
self.alive = True;
print 'open serial port %d ok!\n' %(self.port+1)
print 'baudrate:115200 \n'
self.thread_read = None;
self.thread_read = threading.Thread(target=self.FirstReader);
self.thread_read.setDaemon(1);
self.thread_read.start();
self.thread_write = None;
self.thread_write = threading.Thread(target=self.FirstWriter);
self.thread_write.setDaemon(1);
self.thread_write.start();
#TCP部分
self.thread_TcpServer = None;
self.thread_TcpServer = threading.Thread(target=self.TcpServer);
self.thread_TcpServer.setDaemon(1);
self.thread_TcpServer.start();
self.thread_TcpSend = None;
self.thread_TcpSend = threading.Thread(target=self.TcpSend);
self.thread_TcpSend.setDaemon(1);
self.thread_TcpSend.start();
return True;
else:
return False;
def FirstReader(self):
while self.alive:
# 接收間隔
time.sleep(0.1);
try:
data = '';
n = self.l_serial.inWaiting();
if n:
data = data+self.l_serial.read(n);
#for l in xrange(len(data)):
#print '%02X' % ord(data[l]),
# 發送數據
print 'serial recv:'
print data;
mylock.acquire()
self.snddata = data
mylock.release()
#print_hex(data);
# 判斷結束
except Exception, ex:
print str(ex);
self.waitEnd.set();
self.alive = False;
def FirstWriter(self):
while self.alive:
# 接收間隔
time.sleep(0.1);
try:
#snddata = raw_input('\nenter data send:\n')
if self.rcvdata!='':
self.l_serial.write(self.rcvdata);
print 'serial send:'
print self.rcvdata;
mylock.acquire()
self.rcvdata = '';
mylock.release()
#print_hex(snddata);
except Exception, ex:
print str(ex);
self.waitEnd.set();
self.alive = False;
def TcpServer(self):
self.sockobj.bind((self.myHost, self.myPort))
self.sockobj.listen(10)
print 'TcpServer listen at 5050 oK!\n'
print 'Waiting for connect...\n'
while True:
# 接收間隔
time.sleep(0.1);
self.connection, address = self.sockobj.accept()
print 'Server connected by', address
self.snddata = ''
self.rcvdata = ''
try:
while True:
#讀取客戶端套接字的下一行
data = self.connection.recv(1024)
#如果沒有數量的話，那么跳出循環
if not data: break
#發送一個回復至客戶端
mylock.acquire()
self.snddata = ''
self.rcvdata = data
mylock.release()
#connection.send('Echo=>' + data)
self.connection.close()
except Exception, ex:
self.connection.close()
self.waitEnd.set();
self.alive = False;
def TcpSend(self):
while True:
# 接收間隔
time.sleep(0.1);
while True:
time.sleep(0.1);
try:
if not self.connection is None:
if self.snddata != '':
self.connection.send(self.snddata)
mylock.acquire()
self.rcvdata = ''
self.snddata = ''
mylock.release()
except Exception, ex:
pass
def stop(self):
self.alive = False;
self.thread_read.join();
if self.l_serial.isOpen():
self.l_serial.close();
#測試用部分
if __name__ == '__main__':
print 'CardTest TcpServer - Simple Test Card Tool 1.00\n'
print 'Author:yangyongzhen\n'
print 'QQ:534117529\n'
print 'Copyright (c) **** 2015-2016.\n'
com =raw_input('please enter com port(1-9):')
rt = ComThread(int(com)-1);
try:
if rt.start():
rt.waiting();
rt.stop();
else:
pass;
except Exception,se:
print str(se);
if rt.alive:
rt.stop();
os.system("pause")
print '';
print 'End OK .';
del rt;
黑客rtcp反向鏈接
# -*- coding: utf-8 -*-
'''
filename:rtcp.py
@desc:
利用python的socket端口轉發，用于遠程維護
如果連接不到遠程，會sleep 36s，最多嘗試200(即兩小時)
@usage:
./rtcp.py stream1 stream2
stream為：l:port或c:host:port
l:port表示監聽指定的本地端口
c:host:port表示監聽遠程指定的端口
@author: watercloud, zd, knownsec team
@web: www.knownsec.com, blog.knownsec.com
@date: 2009-7
'''
import socket
import sys
import threading
import time
streams = [None, None] # 存放需要進行數據轉發的兩個數據流（都是SocketObj對象）
debug = 1 # 調試狀態 0 or 1
def print_hex(s):
for c in s:
print '%02x' %(ord(c)),
print
def _usage():
print 'Usage: ./rtcp.py stream1 stream2\nstream : L:port or C:host:port'
def _get_another_stream(num):
'''
從streams獲取另外一個流對象，如果當前為空，則等待
'''
if num == 0:
num = 1
elif num == 1:
num = 0
else:
raise "ERROR"
while True:
if streams[num] == 'quit':
print("can't connect to the target, quit now!")
sys.exit(1)
if streams[num] != None:
return streams[num]
else:
time.sleep(1)
def _xstream(num, s1, s2):
'''
交換兩個流的數據
num為當前流編號,主要用于調試目的，區分兩個回路狀態用。
'''
try:
while True:
#注意，recv函數會阻塞，直到對端完全關閉（close后還需要一定時間才能關閉，最快關閉方法是shutdow）
buff = s1.recv(1024)
if debug > 0:
print num,"recv"
if len(buff) == 0: #對端關閉連接，讀不到數據
print num,"one closed"
break
s2.sendall(buff)
if debug > 0:
print num,"sendall"
print_hex(buff)
except :
print num,"one connect closed."
try:
s1.shutdown(socket.SHUT_RDWR)
s1.close()
except:
pass
try:
s2.shutdown(socket.SHUT_RDWR)
s2.close()
except:
pass
streams[0] = None
streams[1] = None
print num, "CLOSED"
def _server(port, num):
'''
處理服務情況,num為流編號（第0號還是第1號）
'''
srv = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
srv.bind(('0.0.0.0', port))
srv.listen(1)
#print 'local listening at port %d' (%(port))
while True:
conn, addr = srv.accept()
print "connected from:", addr
streams[num] = conn # 放入本端流對象
s2 = _get_another_stream(num) # 獲取另一端流對象
_xstream(num, conn, s2)
def _connect(host, port, num):
''' 處理連接，num為流編號（第0號還是第1號）
@note: 如果連接不到遠程，會sleep 36s，最多嘗試200(即兩小時)
'''
not_connet_time = 0
wait_time = 36
try_cnt = 199
while True:
if not_connet_time > try_cnt:
streams[num] = 'quit'
print('not connected')
return None
conn = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
conn.connect((host, port))
except Exception, e:
print ('can not connect %s:%s!' % (host, port))
not_connet_time += 1
time.sleep(wait_time)
continue
print "connected to %s:%i" % (host, port)
streams[num] = conn #放入本端流對象
s2 = _get_another_stream(num) #獲取另一端流對象
_xstream(num, conn, s2)
if __name__ == '__main__':
print 'Tcp to Tcp Tool 1.00\n'
print 'Author:yangyongzhen\n'
print 'QQ:534117529\n'
print 'Copyright (c) Newcapec 2015-2016.\n'
Server_IP = raw_input('please enter Server IP:')
print 'Server_IP: %s' %(Server_IP)
Server_Port = raw_input('please enter Server Port:')
print 'Server_Port: %s' %(Server_Port)
com =raw_input('please enter Local Port:')
tlist = [] # 線程列表，最終存放兩個線程對象
#targv = [sys.argv[1], sys.argv[2] ]
t = threading.Thread(target=_server, args=(int(com), 0))
tlist.append(t)
t = threading.Thread(target=_connect, args=(Server_IP, int(Server_Port), 1))
tlist.append(t)
for t in tlist:
t.start()
for t in tlist:
t.join()
sys.exit(0)
調用c的動態庫示例
# -*- coding:utf8 -*-
from ctypes import *
from binascii import unhexlify as unhex
import os
dll = cdll.LoadLibrary('mydll.dll');
print 'begin load mydll..'
#key
#str1='\x9B\xED\x98\x89\x15\x80\xC3\xB2'
str1=unhex('0000556677222238')
#data
str2=unhex('002d2000000100015566772222383CD881604D0D286A556677222238000020141214181427')
#output
str3='\x12\x34\x56\x78\x12\x34\x56\x78'
pstr1=c_char_p()
pstr2=c_char_p()
pstr3=c_char_p()
pstr1.value=str1
pstr2.value=str2
pstr3.value=str3
dll.CurCalc_DES_MAC64(805306481,pstr1,0,pstr2,13,pstr3)
print pstr1
print pstr2
print pstr3
stro= pstr3.value
print stro
strtemp=''
for c in stro:
print "%02x" % (ord(c))
strtemp+="{0:02x}".format(ord(c))
print strtemp
os.execlp("E:\\RSA.exe",'')
s=raw_input('press any key to continue...')
tcp的socket連接報文測試工具
# -*- coding: utf-8 -*-
import socket
from myutil import *
from binascii import unhexlify as unhex
from ctypes import *
dll = cdll.LoadLibrary('mydll.dll')
print 'begin load mydll..'
HOST, PORT = "192.168.51.28", 5800
sd ="1234567812345678"
# Create a socket (SOCK_STREAM means a TCP socket)
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
# Connect to server and send data
sock.connect((HOST, int(PORT))
print "Sent1 OK:"
print sd
# Receive data from the server and shut down
received = sock.recv(1024)
print "Received:"
print_hex(received)
print 'received len is 0x%02x' %(len(received))
print 'received data analysis...'
re1=received[0:4]
print_hex(re1)
re1=received[4:6]
print_hex(re1)
re1=received[6:10]
print_hex(re1)
re1=received[10:16]
print_hex(re1)
#pack2 send
sock.send(sd2.decode('hex'))
print "Sent2 OK:"
print sd2
# Receive data from the server and shut down
received1 = sock.recv(1024)
print "Received1:"
print_hex(received1)
print 'received1 len is 0x%02x' %(len(received1))
finally:
sock.close()
s=raw_input('press any key to continue...')
報文拼接與加解密測試
# -*- coding: gb2312 -*-
import socket
from myutil import *
from binascii import unhexlify as unhex
from ctypes import *
dll = cdll.LoadLibrary('mydll.dll')
print 'begin load mydll..'
#key
key='\xF1\xE2\xD3\xC4\xF1\xE2\xD3\xC4'
#output MAC
mac='\x00'*8
data='\x00'*8
pkey=c_char_p()
pdata=c_char_p()
pmac=c_char_p()
pkey.value=key
pdata.value=data
pmac.value=mac
#pack1
class pack:
pass
pk=pack()
pk.len='00000032'
pk.ID='0001'
pk.slnum='00000004'
pk.poscode='123456781234'
pk.rand='1122334455667788'
pk.psam='313233343536'
pk.kind='0000'
pk.ver='000001'
pk.time='20140805135601'
pk.mac='06cc571e6d96e12d'
data=unhex(pk.len+pk.ID+pk.slnum+pk.poscode+pk.rand+pk.psam+pk.kind+pk.ver+pk.time)
#print_hex(data)
pdata.value=data
#cacl MAC
dll.CurCalc_DES_MAC64(805306481,pkey,0,pdata,42,pmac)
stro= pmac.value
strtemp=''
for c in stro:
strtemp+="{0:02x}".format(ord(c))
#print strtemp
pk.mac=strtemp
#data to send
sd=pk.len+pk.ID+pk.slnum+pk.poscode+pk.rand+pk.psam+pk.kind+pk.ver+pk.time+pk.mac
print 'send1 len is 0x%02x' %(len(sd)/2)
print sd
#pack2
class pack2:
pass
pk2=pack2()
pk2.len='0000006E'
pk2.ID='0012'
pk2.slnum='00000005'
pk2.fatCode='00'
pk2.cardASN='0000000000000000'
pk2.cardType='00'
pk2.userNO= '0000000000000000'
pk2.fileName1='00000000000000000000000000000015'
pk2.dataLen1='00'
pk2.dataArea1='00000000000000319999990800FB2014080620240806FFFFFFFFFFFFFFFFFFFF'
pk2.fileName2='00000000000000000000000000000016'
pk2.dataLen2='00'
pk2.dataArea2='000003E800FFFF16'
pk2.mac='06cc571e6d96e12d'
data2=unhex(pk2.len+pk2.ID+pk2.slnum+pk2.fatCode+pk2.cardASN+pk2.cardType+pk2.userNO+pk2.fileName1+pk2.dataLen1+pk2.dataArea1+pk2.fileName2+pk2.dataLen2+pk2.dataArea2)
pdata.value=data2
#cacl MAC
dll.CurCalc_DES_MAC64(805306481,pkey,0,pdata,102,pmac)
stro= pmac.value
strtemp=''
for c in stro:
strtemp+="{0:02x}".format(ord(c))
#print strtemp
pk2.mac=strtemp
#data to send
sd2=pk2.len+pk2.ID+pk2.slnum+pk2.fatCode+pk2.cardASN+pk2.cardType+pk2.userNO+pk2.fileName1+pk2.dataLen1+pk2.dataArea1+pk2.fileName2+pk2.dataLen2+pk2.dataArea2+pk2.mac
print 'send2 len is 0x%02x' %(len(sd2)/2)
print sd2
#PORT="192.168.60.37"
#PORT="localhost"
HOST, PORT = "192.168.51.28", 5800
# Create a socket (SOCK_STREAM means a TCP socket)
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
# Connect to server and send data
sock.connect((HOST, int(PORT))
#data= "123456789"
#s = struct.pack('bbb',1,2,3)
sock.send(sd.decode('hex'))
print "Sent1 OK:"
print sd
# Receive data from the server and shut down
received = sock.recv(1024)
print "Received:"
print_hex(received)
print 'received len is 0x%02x' %(len(received))
print 'received data analysis...'
re1=received[0:4]
print_hex(re1)
re1=received[4:6]
print_hex(re1)
re1=received[6:10]
print_hex(re1)
re1=received[10:16]
print_hex(re1)
#pack2 send
sock.send(sd2.decode('hex'))
print "Sent2 OK:"
print sd2
# Receive data from the server and shut down
received1 = sock.recv(1024)
print "Received1:"
print_hex(received1)
print 'received1 len is 0x%02x' %(len(received1))
finally:
sock.close()
s=raw_input('press any key to continue...')
二進制文件解析工具
# -*- coding: utf-8 -*-
from myutil import *
from binascii import unhexlify as unhex
import os
path=os.getcwd()
path+='\\rec04.bin'
#print path
print "begin ans......"
f1=open(path,'rb')
for i in range(1,35):
s=f1.read(280)
print "data:",i
print_hex(s)
print 'read data is:'
print_hex(s)
recstatadd = 187
print "終端編號:"
print_hex(s[recstatadd:recstatadd+10])
print "卡號長度:"
print_hex(s[10])
print "卡號: "
print_hex(s[11:11+10])
print "持卡序號1+所屬地城市代碼2+交易地城市代碼2"
print_hex(s[recstatadd+22:recstatadd+22+5])
print "應用交易計數器"
print_hex(s[92:92+2])
print "交易前余額4，交易金額3"
print_hex(s[recstatadd+29:recstatadd+29+7])
print "交易日期:"
print_hex(s[99:99+3])
print "交易時間:"
print_hex(s[44:44+3])
print "終端編號"
print_hex(s[21:21+8])
print "商戶編號"
print_hex(s[21+8:21+8+15])
print "批次號"
print_hex(s[5:5+3])
print "應用密文"
print_hex(s[47:47+8])
print "授權金額"
print_hex(s[103:103+6])
print "其他金額"
print_hex(s[115:115+6])
print "終端驗證結果"
print_hex(s[94:5+94])
print "應用交易計數器"
print_hex(s[92:92+4])
print "卡片驗證結果"
print_hex(s[56:56+32])
print "卡片序列號:"
print_hex(s[131])
f1.close()抓取動漫圖片
# -*- coding:utf8 -*-
# 2013.12.36 19:41
# 抓取dbmei.com的圖片。
from bs4 import BeautifulSoup
import os, sys, urllib2,time,random
# 創建文件夾
path = os.getcwd() # 獲取此腳本所在目錄
new_path = os.path.join(path,u'暴走漫畫')
if not os.path.isdir(new_path):
os.mkdir(new_path)
def page_loop(page=1):
url = 'http://baozoumanhua.com/all/hot/page/%s?sv=1389537379' % page
content = urllib2.urlopen(url)
soup = BeautifulSoup(content)
my_girl = soup.find_all('div',class_='img-wrap')
for girl in my_girl:
jokes = girl.find('img')
link = jokes.get('src')
flink = link
print flink
content2 = urllib2.urlopen(flink).read()
#with open(u'暴走漫畫'+'/'+time.strftime('%H-%M-%S')+random.choice('qwertyuiopasdfghjklzxcvbnm')+flink[-5:],'wb') as code: #在OSC上現學的
with open(u'暴走漫畫'+'/'+flink[-11:],'wb') as code:
code.write(content2)
page = int(page) + 1
print u'開始抓取下一頁'
print 'the %s page' % page
page_loop(page)
page_loop()
抓取網站模板
#!/usr/bin/env python
# -*- coding: utf-8 -*-
# by yangyongzhen
# 2016-12-06
from bs4 import BeautifulSoup
import urllib,urllib2,os,time
import re
rootpath = os.getcwd()+u'/抓取的模板/'
def makedir(path):
if not os.path.isdir(path):
os.makedirs(path)
#創建抓取的根目錄
makedir(rootpath)
#顯示下載進度
def Schedule(a,b,c):
'''''
a:已經下載的數據塊
b:數據塊的大小
c:遠程文件的大小
'''
per = 100.0 * a * b / c
if per > 100 :
per = 100
print '%.2f%%' % per
def grabHref(url,listhref,localfile):
html = urllib2.urlopen(url).read()
html = unicode(html,'gb2312','ignore').encode('utf-8','ignore')
content = BeautifulSoup(html).findAll('link')
myfile = open(localfile,'w')
pat = re.compile(r'href="([^"]*)"')
pat2 = re.compile(r'http')
for item in content:
h = pat.search(str(item))
href = h.group(1)
if pat2.search(href):
ans = href
else:
ans = url+href
listhref.append(ans)
myfile.write(ans)
myfile.write('\r\n')
print ans
content = BeautifulSoup(html).findAll('script')
pat = re.compile(r'src="([^"]*)"')
pat2 = re.compile(r'http')
for item in content:
h = pat.search(str(item))
if h:
href = h.group(1)
if pat2.search(href):
ans = href
else:
ans = url+href
listhref.append(ans)
myfile.write(ans)
myfile.write('\r\n')
print ans
content = BeautifulSoup(html).findAll('a')
pat = re.compile(r'href="([^"]*)"')
pat2 = re.compile(r'http')
for item in content:
h = pat.search(str(item))
if h:
href = h.group(1)
if pat2.search(href):
ans = href
else:
ans = url+href
listhref.append(ans)
myfile.write(ans)
myfile.write('\r\n')
print ans
myfile.close()
def main():
url = "http://192.168.72.140/qdkj/" #采集網頁的地址
listhref =[] #鏈接地址
localfile = 'ahref.txt' #保存鏈接地址為本地文件，文件名
grabHref(url,listhref,localfile)
listhref = list(set(listhref)) #去除鏈接中的重復地址
curpath = rootpath
start = time.clock()
for item in listhref:
curpath = rootpath
name = item.split('/')[-1]
fdir = item.split('/')[3:-1]
for i in fdir:
curpath += i
curpath += '/'
print curpath
makedir(curpath)
local = curpath+name
urllib.urlretrieve(item, local,Schedule) # 遠程保存函數
end = time.clock()
print u'模板抓取完成！'
print u'一共用時：',end-start,u'秒'
if __name__=="__main__":
main()總結
到此這篇關于python常用小腳本的文章就介紹到這了,更多相關python常用小腳本內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
相關文章
Django Haystack 全文檢索與關鍵詞高亮的實現
這篇文章主要介紹了Django Haystack 全文檢索與關鍵詞高亮的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-02-02
利用python在excel里面直接使用sql函數的方法
今天小編就為大家分享一篇利用python在excel里面直接使用sql函數的方法，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2019-02-02
PYQT5 實現給listwidget的滾動條添加滾動信號
這篇文章主要介紹了PYQT5 實現給listwidget的滾動條添加滾動信號，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2021-03-03
python進度條顯示-tqmd模塊的實現示例
這篇文章主要介紹了python進度條顯示-tqmd模塊的實現示例，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧2020-08-08
Python 3.x讀寫csv文件中數字的方法示例
在我們?nèi)粘ｉ_發中經常需要對csv文件進行讀寫，下面這篇文章主要給大家介紹了關于Python 3.x讀寫csv文件中數字的相關資料，文中通過示例代碼介紹的非常詳細，對大家具有一定的參考學習價值，需要的朋友們下面跟著小編來一起學習學習吧。2017-08-08
這篇文章主要介紹了Python測試模塊doctest使用解析,文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2019-08-08
大家好，本篇文章主要講的是Python中如何處理常見報錯，感興趣的同學趕快來看一看吧，對你有幫助的話記得收藏一下2022-01-01
使用python腳本實現Redis未授權訪問檢測
Redis未授權訪問漏洞是一種安全漏洞,可能導致未經授權的用戶或攻擊者訪問Redis數據庫,甚至修改或刪除其中的數據,這種漏洞通常發生在管理員未正確配置Redis實例的訪問控制和認證機制時,本文介紹了python腳本實現Redis未授權訪問漏洞利用,需要的朋友可以參考下2024-10-10
Anaconda指的是一個開源的Python發行版本,其包含了Conda、Python等180多個科學包及其依賴項,下面這篇文章主要給大家介紹了關于Anaconda是什么的相關資料,需要的朋友可以參考下2023-02-02
今天小編就為大家分享一篇pandas 條件搜索返回列表的方法，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2018-10-10