基于Python編寫一個點名器的示例代碼
前言
想起小學的時候老師想點名找小伙伴回答問題的時候,老師竟斥巨資買了個點名器。今日無聊便敲了敲小時候老師斥巨資買的點名器。
本人姓白,就取名小白點名器啦,嘿嘿
代碼包含:添加姓名、查看花名冊、使用指南、隨機抽取名字的功能(完整源碼在最后)
主界面
定義主界面。使用“w+”模式創建test.txt文件(我添加了個背景圖片,若不需要可省略)
#打開時預加載儲存在test.txt文件中的花名冊
namelist = []
with open("test.txt", "r") as f:
for line in f.readlines():
line = line.strip('\n')
namelist.append(line)
win = Tk()
win.title('小白點名器')
win.geometry('500x300')
#定義畫布,添加背景圖片
canvas = Canvas(win,width=500,height=300)
img_obj = PhotoImage(file=r"C:\Users\ge\Downloads\IMG_202206307919_png.png") #需輸入照片路徑
image = canvas.create_image(250,0,anchor = "n" , image = img_obj)
canvas.pack()
a = StringVar()
b = StringVar()
b.set('開始')
#定義可變文本信息
Label1 = Label(win, textvariable=a, font=('黑體', 100)).place(y= 60 , x=65)
#定義四個按鈕
Button1 = Button(win, textvariable=b, font=('等線', 30), command = zhuanzhuan).place(y=210,x = 190)
Button2 = Button(win, text = '添加姓名', font=('等線', 20), command = addname).place(x= 50,y =0)
Button3 = Button(win, text = '查看', font=('等線', 20), command = chakan).place(x= 230,y =0)
Button4 = Button(win, text = '指南', font=('等線', 20), command = zhinan).place(x= 360,y =0)
win.mainloop()
添加姓名
定義添加姓名界面,每添加一次姓名就保存到test.txt文件中,判斷輸入是否為空(添加提示框)、判斷花名冊是否為空。
#定義添加姓名界面
def addname():
global Entry1
window = Tk()
window.title('姓名添加器')
window.geometry('400x200+500+200')
Label11 = Label(window, text = '請?jiān)谙路捷斎肽阋砑拥男彰?, font=('黑體', 18), anchor='center').place(y=30, x=25)
Entry1 = Entry(window, font=('等線', 30), width=70)
Entry1.place(y=80, x=70, width=200, height=80)
Button3 = Button(window, text = '確認', font=('等線', 18), command = addname1).place(x= 300,y =80, height=80)
#每添加一次姓名就保存到test.txt文件中
def addname1():
global namelist #聲明為全局變量實時更新
if len(Entry1.get()) == 0:
tkinter.messagebox.showinfo('提示', '姓名輸入不能為空哦')
else:
if len(Entry1.get()) == 2:
zhongjian = list(Entry1.get())[::1]
zhongjian1 = zhongjian[0] + ' ' +zhongjian[1]
if len(namelist) == 0:
nam = zhongjian1
else:
nam = '\n' + zhongjian1
else:
if len(namelist) == 0:
nam = str(Entry1.get())
else:
nam = '\n' + str(Entry1.get())
with open("test.txt", "a") as f:
f.write(nam)
tip = '姓名:' + Entry1.get() + ' 添加成功'
tkinter.messagebox.showinfo('提示', tip)
print(nam)
namelist = []
with open("test.txt", "r") as f:
for line in f.readlines():
line = line.strip('\n')
namelist.append(line)
查看花名冊
這個比較簡單,使用Text來顯示字典內的信息即可
def chakan():
window = Tk()
window.title('花名冊查看')
window.geometry('350x200+500+200')
console = Text(window, font=('等線', 11))
console.place(y=20, x=35, width=280, height=170)
console.insert(1.0,namelist)
使用指南
同上,使用Text顯示
def zhinan():
window = Tk()
window.title('小白點名器使用指南')
window.geometry('350x230+500+200')
console = Text(window, font=('等線', 11))
console.place(y=20, x=35, width=280, height=190)
console.insert(1.0, ' 歡迎使用小白點名器1.0\n你可以在”添加姓名按鈕上輸入你要添加的名字\n你可以在”查看“按鈕中查看花名冊中所有的名字'
'\n你可以在此程序同級的名為”花名冊.txt“的文件夾中直接批量添加、刪減姓名(使用回車做分隔)\n--------------------------------\n'
'(指南之外)此程序在CSDN中已開源,歡迎訪問我的博客:晉升閣\n需要合作的可加我微信:baijinge1137')
名字轉動功能
判斷“開始”、“停止”狀態。定義線程。啟用一個線程
#判斷狀態
def zhuanzhuan():
if b.get() == '開始':
b.set('停止')
elif b.get() =="停止":
b.set('開始')
_thread.start_new_thread(xiancheng,()) #啟用一個線程來轉動姓名
#定義一個線程
def xiancheng():
global xuanzhong
while b.get()=='停止':
try:
xuanzhong = random.choice(namelist)
a.set(xuanzhong)
Label1.updata()#刷新數據
time.sleep(0.3)#0.3秒刷新一次
except:
continue
time.sleep(0.3)
a.set(xuanzhong)
完整代碼
提示:我的項目是在主界面添加了背景圖片的,若是不需要添加背景圖片可刪掉90-94行代碼。若是需要添加背景圖片的需注意路徑地址是否正確
import random
import time
from tkinter import *
import _thread
import tkinter.messagebox
def zhuanzhuan():
if b.get() == '開始':
b.set('停止')
elif b.get() =="停止":
b.set('開始')
_thread.start_new_thread(xiancheng,()) #啟用一個線程來轉動姓名
def xiancheng():
global xuanzhong
while b.get()=='停止':
try:
xuanzhong = random.choice(namelist)
a.set(xuanzhong)
Label1.updata()
time.sleep(0.3)
except:
continue
time.sleep(0.3)
a.set(xuanzhong)
def addname1():
global namelist #聲明為全局變量實時更新
if len(Entry1.get()) == 0:
tkinter.messagebox.showinfo('提示', '姓名輸入不能為空哦')
else:
if len(Entry1.get()) == 2:
zhongjian = list(Entry1.get())[::1]
zhongjian1 = zhongjian[0] + ' ' +zhongjian[1]
if len(namelist) == 0:
nam = zhongjian1
else:
nam = '\n' + zhongjian1
else:
if len(namelist) == 0:
nam = str(Entry1.get())
else:
nam = '\n' + str(Entry1.get())
with open("test.txt", "a") as f:
f.write(nam)
tip = '姓名:' + Entry1.get() + ' 添加成功'
tkinter.messagebox.showinfo('提示', tip)
print(nam)
namelist = []
with open("test.txt", "r") as f:
for line in f.readlines():
line = line.strip('\n')
namelist.append(line)
def chakan():
window = Tk()
window.title('花名冊查看')
window.geometry('350x200+500+200')
console = Text(window, font=('等線', 11))
console.place(y=20, x=35, width=280, height=170)
console.insert(1.0,namelist)
def zhinan():
window = Tk()
window.title('小白點名器使用指南')
window.geometry('350x230+500+200')
console = Text(window, font=('等線', 11))
console.place(y=20, x=35, width=280, height=190)
console.insert(1.0, ' 歡迎使用小白點名器1.0\n你可以在”添加姓名按鈕上輸入你要添加的名字\n你可以在”查看“按鈕中查看花名冊中所有的名字'
'\n你可以在此程序同級的名為”花名冊.txt“的文件夾中直接批量添加、刪減姓名(使用回車做分隔)\n--------------------------------\n'
'(指南之外)此程序在CSDN中已開源,歡迎訪問我的博客:晉升閣\n需要合作的可加我微信:baijinge1137')
def addname():
global Entry1
window = Tk()
window.title('姓名添加器')
window.geometry('400x200+500+200')
Label11 = Label(window, text = '請?jiān)谙路捷斎肽阋砑拥男彰?, font=('黑體', 18), anchor='center').place(y=30, x=25)
Entry1 = Entry(window, font=('等線', 30), width=70)
Entry1.place(y=80, x=70, width=200, height=80)
Button3 = Button(window, text = '確認', font=('等線', 18), command = addname1).place(x= 300,y =80, height=80)
namelist = []
with open("test.txt", "r") as f:
for line in f.readlines():
line = line.strip('\n')
namelist.append(line)
win = Tk()
win.title('小白點名器')
win.geometry('500x300')
canvas = Canvas(win,width=500,height=300)
img_obj = PhotoImage(file=r"C:\Users\ge\Downloads\IMG_202206307919_png.png") #背景圖片路徑,若不需要添加將85—88行刪掉即可
image = canvas.create_image(250,0,anchor = "n" , image = img_obj)
canvas.pack()
a = StringVar()
b = StringVar()
b.set('開始')
Label1 = Label(win, textvariable=a, font=('黑體', 100)).place(y= 60 , x=65)
Button1 = Button(win, textvariable=b, font=('等線', 30), command = zhuanzhuan).place(y=210,x = 190)
Button2 = Button(win, text = '添加姓名', font=('等線', 20), command = addname).place(x= 50,y =0)
Button3 = Button(win, text = '查看', font=('等線', 20), command = chakan).place(x= 230,y =0)
Button4 = Button(win, text = '指南', font=('等線', 20), command = zhinan).place(x= 360,y =0)
win.mainloop()以上就是基于Python編寫一個點名器的示例代碼的詳細內容,更多關于Python點名器的資料請關注腳本之家其它相關文章!
- 基于Python實現簡單的學生點名系統
- Python寫一個簡單上課點名系統(附源碼)
- python實戰練習做一個隨機點名的程序
- Python實現上課點名器系統
- 一起用Python做個上課點名器的制作過程
- python用tkinter實現一個簡易能進行隨機點名的界面
- 基于python tkinter的點名小程序功能的實例代碼
- python寫一個隨機點名軟件的實例
- Python輕松寫個課堂隨機點名系統
相關文章
Python實戰項目之MySQL tkinter pyinstaller實現學生管理系統
讀萬卷書不如行萬里路,只學書上的理論是遠遠不夠的,只有在實戰中才能獲得能力的提升,本篇文章手把手帶你用MySQL、tkinter、 pyinstaller實現一個學生管理系統,大家可以通過案例查缺補漏,提升水平2021-10-10
Python實現簡易版的Web服務器(推薦)
這篇文章主要介紹了Python實現簡易Web服務器的相關資料,非常不錯,具有參考借鑒價值,需要的朋友可以參考下2018-01-01
Python使用unicodedata實現字符串標準化
這篇文章主要來和大家聊一聊 Python 的一個內置模塊:unicodedata,它是專門用來處理 unicode 字符串的,下面就一起來看看它的用法吧2023-06-06
自動轉換Python代碼為HTML界面的GUI庫remi使用探究
這篇文章主要為大家介紹了自動轉換Python代碼為HTML界面的GUI庫remi使用探究,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2024-01-01
Python獲取當前頁面內所有鏈接的四種方法對比分析
這篇文章主要介紹了Python獲取當前頁面內所有鏈接的方法,結合實例形式對比分析了Python常用的四種獲取頁面鏈接的方法,并附帶了iframe框架內鏈接的獲取方法,需要的朋友可以參考下2017-08-08

