Qt基于QScrollArea實現界面嵌套移動

更新時間：2022年06月10日 14:29:26 作者：熊來闖一闖

在實際的應用場景中，經常會出現軟件界面戰場圖大于實際窗體大小。本文將利用QScrollArea可以為widget窗體添加滾動條，實現界面嵌套移動，感興趣的可以了解一下

在實際的應用場景中，經常會出現軟件界面戰場圖大于實際窗體大小，利用QScrollArea可以為widget窗體添加滾動條，可以實現小窗體利用滾動條顯示大界面需求。實現如下：

QT創建一個qWidget界面

在ui界面中利用QT自帶的widget控件布局一個如下圖所示的層疊關系，widget_2界面大小需大于widget大小

界面布局好后，將widget_2提升為類，提升之前需為工程新添加一個設計界面類，添加完之后，將widget_2提升為類類名和前面新添加的設計界面類名一致

源碼實現如下

patchwindow.h

#ifndef PATCHWINDOW_H
#define PATCHWINDOW_H

#include <QDebug>
#include <QPainter>
#include <QWidget>
#include <QMouseEvent>
#include <QStyleOption>
#include <QPaintEvent>

enum CursorRegion{
    NONE,
    TOPLEFT,
    TOPRIGHT,
    BOTTOMRIGHT,
    BOTTOMLEFT
};

namespace Ui {
class Patchwindow;
}

class Patchwindow : public QWidget
{
    Q_OBJECT

public:
    explicit Patchwindow(QWidget *parent = 0);
    ~Patchwindow();
    CursorRegion getCursorRegion(QPoint);

public:
    int borderWidth;
    int handleSize;

    bool mousePressed;
    QPoint previousPos;

private:
    Ui::Patchwindow *ui;

protected:
    void mousePressEvent(QMouseEvent*);
    void mouseReleaseEvent(QMouseEvent*);
    void mouseMoveEvent(QMouseEvent*);

signals:
    void send_widget_rx_ry(int rx,int ry);
};

#endif // PATCHWINDOW_H

patchwindow.cpp

#include "patchwindow.h"
#include "ui_patchwindow.h"

Patchwindow::Patchwindow(QWidget *parent) :
    QWidget(parent),
    ui(new Ui::Patchwindow)
{
    ui->setupUi(this);

    this->setMouseTracking(true);

    setFocusPolicy(Qt::StrongFocus);

    mousePressed = false;
    borderWidth = 1;
    handleSize = 8;

}

Patchwindow::~Patchwindow()
{
    delete ui;
}


//設置鼠標形狀
CursorRegion Patchwindow::getCursorRegion(QPoint pos)
{
    if (pos.x() > 0 && pos.x() < (handleSize + borderWidth) &&
        pos.y() > 0 && pos.y() < (handleSize + borderWidth)  ){
        if (this->hasFocus())
            this->setCursor(QCursor(Qt::SizeFDiagCursor));
        return CursorRegion::TOPLEFT;
    }

    if (pos.x() > (this->width() - handleSize - borderWidth) && pos.x() < this->width() &&
        pos.y() > 0 && pos.y() < (handleSize + borderWidth)  ){
        if (this->hasFocus())
            this->setCursor(QCursor(Qt::SizeBDiagCursor));
        return CursorRegion::TOPRIGHT;
    }

    if (pos.x() > (this->width() - handleSize - borderWidth) && pos.x() < this->width() &&
        pos.y() > (this->height() - handleSize - borderWidth) && pos.y() < this->height()  ){
        if (this->hasFocus())
            this->setCursor(QCursor(Qt::SizeFDiagCursor));
        return CursorRegion::BOTTOMRIGHT;
    }


    if (pos.x() > 0 && pos.x() < (handleSize + borderWidth) &&
        pos.y() > (this->height() - handleSize - borderWidth) && pos.y() < this->height()  ){
        if (this->hasFocus())
            this->setCursor(QCursor(Qt::SizeBDiagCursor));
        return CursorRegion::BOTTOMLEFT;
    }

    this->setCursor(Qt::ArrowCursor);
    return CursorRegion::NONE;
}

void Patchwindow::mousePressEvent(QMouseEvent *event)
{
    mousePressed = true;
    previousPos = this->mapToParent(event->pos());
    //qDebug()<<"previousPos = "<<previousPos;
}

void Patchwindow::mouseReleaseEvent(QMouseEvent*)
{
    mousePressed = false;
}

void Patchwindow::mouseMoveEvent(QMouseEvent *event)
{
    if (mousePressed){
        QPoint _curPos = this->mapToParent(event->pos());
        QPoint _offPos = _curPos - previousPos;
        previousPos = _curPos;
        //qDebug()<<"_offPos = "<<_offPos;
        //qDebug()<<"_curPos = "<<_curPos;
        emit send_widget_rx_ry(_offPos.rx(),_offPos.ry());
    }
}

mainwindow.h

#ifndef MAINWINDOW_H
#define MAINWINDOW_H

#include <QMainWindow>
#include <QHBoxLayout>
#include <QDebug>
#include <QScrollArea>


namespace Ui {
class MainWindow;
}

class MainWindow : public QMainWindow
{
    Q_OBJECT

public:
    explicit MainWindow(QWidget *parent = 0);
    ~MainWindow();

    QScrollArea *m_pScroll;


private:
    Ui::MainWindow *ui;

private slots:
    void remove_widget(int r_x,int r_y);


};

#endif // MAINWINDOW_H

mainwindow.cpp

#include "mainwindow.h"
#include "ui_mainwindow.h"
#include <QPalette>

#include <QScrollBar>

MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::MainWindow)
{
    ui->setupUi(this);
    //this->resize(600,600);

    //給父窗體填充顏色
    QPalette palette = ui->widget_2->palette();
    palette.setBrush(QPalette::Window,QBrush(QColor(61,61,61)));
    ui->widget_2->setAutoFillBackground(true);
    ui->widget_2->setPalette(palette);

    ui->widget_2->setAttribute(Qt::WA_StyledBackground);
    ui->widget_2->setStyleSheet("QWidget{background: black}");

    ui->widget_3->setAttribute(Qt::WA_TransparentForMouseEvents, true);//設置該層鼠標事件透明，可以設置為顯示層

    m_pScroll = new QScrollArea(ui->widget);
    m_pScroll->setWidget(ui->widget_2);//給widget_2設置滾動條
    //ui->widget_2->setMinimumSize(1500,1000);//這里注意，要比主窗體的尺寸要大，不然太小的話會留下一片空白

    QHBoxLayout *pLayout = new QHBoxLayout;
    pLayout->addWidget(m_pScroll);
    pLayout->setMargin(0);
    pLayout->setSpacing(0);
    ui->widget->setLayout(pLayout);

    connect(ui->widget_2,&Patchwindow::send_widget_rx_ry,this,&MainWindow::remove_widget);

}

MainWindow::~MainWindow()
{
    delete ui;
}

void MainWindow::remove_widget(int r_x,int r_y)
{
    r_y = m_pScroll->verticalScrollBar()->value()-r_y;
    r_x = m_pScroll->horizontalScrollBar()->value()-r_x;

    if((0 < r_y) | (r_y == 0))
    {
        if(r_y > m_pScroll->verticalScrollBar()->maximum())
        {
            r_y = m_pScroll->verticalScrollBar()->maximum();
        }
    }
    else
    {
        r_y = 0;
    }

    if((0 < r_x) | (r_x == 0))
    {
        if(r_x > m_pScroll->horizontalScrollBar()->maximum())
        {
            r_x = m_pScroll->horizontalScrollBar()->maximum();
        }
    }
    else
    {
        r_x = 0;
    }

    m_pScroll->verticalScrollBar()->setValue(r_y);
    m_pScroll->horizontalScrollBar()->setValue(r_x);

}

最終實現效果如下，可以通過滾輪滾動界面，也可以通過鼠標拖拽來實現界面拖拽效果：

到此這篇關于Qt基于QScrollArea實現界面嵌套移動的文章就介紹到這了,更多相關Qt QScrollArea界面嵌套移動內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: