Python實現向好友發送微信消息優化篇

更新時間：2022年06月09日 09:04:54 作者：Qwertyuiop2016

利用python可以實現微信消息發送功能，怎么實現呢？你肯定會想著很復雜，但是python的好處就是很多人已經把接口打包做好了，只需要調用即可，今天通過本文給大家分享使用?Python?實現微信消息發送的思路代碼，一起看看吧

前言

之前說了怎么寫機器碼到內存，然后調用?，F(xiàn)在說說怎么優化。

用Python發送微信消息給好友

第二次優化

再看一遍c語言的代碼

void SendText( wchar_t* wsTextMsg) {
    // 發送的好友，filehelper是文件傳輸助手
	wchar_t wsWxId[0x10] = L"filehelper";
	WxBaseStruct wxWxid(wsWxId);
	// 發送的消息內容
	WxBaseStruct wxTextMsg(wsTextMsg);
	wchar_t** pWxmsg = &wxTextMsg.buffer;
	char buffer[0x3B0] = { 0 };
	char wxNull[0x100] = { 0 };
	DWORD dllBaseAddress = (DWORD)GetModuleHandleA("WeChatWin.dll");
	// 發消息的函數call地址
	DWORD callAddress = dllBaseAddress + 0x521D30;
	__asm {
		lea eax, wxNull;
		push 0x1;
		push eax;
		mov edi, pWxmsg;
		push edi;
		lea edx, wxWxid;
		lea ecx, buffer;
		call callAddress;
		add esp, 0xC;
	}
}

上面的代碼真正發消息的是asm里面的代碼，之前的c代碼都是在組裝內存數據。那我們是不是可以用Python組裝數據，只講下面的匯編轉為機器碼寫入內存調用，這樣就少了很多無用的機器碼。

改完的SendText函數如下

wchar_t wsWxId[0x10] = L"filehelper";
wchar_t wsTextMsg[0x100] = L"test";
WxBaseStruct wxWxid(wsWxId);
WxBaseStruct wxTextMsg(wsTextMsg);
wchar_t** pWxmsg = &wxTextMsg.buffer;
char buffer[0x3B0] = { 0 };
char wxNull[0x100] = { 0 };
DWORD dllBaseAddress = (DWORD)GetModuleHandleA("WeChatWin.dll");;
DWORD callAddress = dllBaseAddress + 0x521D30;
void SendText() {
   __asm {
       lea eax, wxNull;
       push 0x1;
       push eax;
       mov edi, pWxmsg;
       push edi;
       lea edx, wxWxid;
       lea ecx, buffer;
       call callAddress;
       add esp, 0xC;
   }
}

匯編代碼：

[]里面包含的類型和變量名其實就是地址，只需要將地址改成用Python構造的地址就可以了

完整代碼如下：

import os
import pymem
import ctypes
import time
def convert_addr(addr):
    if isinstance(addr, int):
        addr = hex(addr)
    if addr.startswith("0x") or addr.startswith("0X"):
        addr = addr[2:]
    if len(addr) < 8:
        addr = (8-len(addr))*'0' + addr
    tmp = []
    for i in range(0, 8, 2):
        tmp.append(addr[i:i+2])
    tmp.reverse()
    return ''.join(tmp)
def WxBaseStruct(process_handle, content):
    struct_address = pymem.memory.allocate_memory(process_handle, 20)
    bcontent = content.encode('utf-16le')
    content_address = pymem.memory.allocate_memory(process_handle, len(bcontent)+16)
    pymem.ressources.kernel32.WriteProcessMemory(process_handle, content_address, bcontent, len(bcontent), None)
    pymem.memory.write_int(process_handle, struct_address, content_address)
    pymem.memory.write_int(process_handle, struct_address+0x4, len(content))
    pymem.memory.write_int(process_handle, struct_address+0x8, len(content)*2)
    pymem.memory.write_int(process_handle, struct_address+0xC, 0)
    pymem.memory.write_int(process_handle, struct_address+0x10, 0)
    return struct_address, content_address
def start_thread(process_handle, address, params=None):
    params = params or 0
    NULL_SECURITY_ATTRIBUTES = ctypes.cast(0, pymem.ressources.structure.LPSECURITY_ATTRIBUTES)
    thread_h = pymem.ressources.kernel32.CreateRemoteThread(
        process_handle,
        NULL_SECURITY_ATTRIBUTES,
        0,
        address,
        params,
        0,
        ctypes.byref(ctypes.c_ulong(0))
    )
    last_error = ctypes.windll.kernel32.GetLastError()
    if last_error:
        pymem.logger.warning('Got an error in start thread, code: %s' % last_error)
    pymem.ressources.kernel32.WaitForSingleObject(thread_h, -1)
    return thread_h
def main(wxpid, wxid, msg):
    process_handle = pymem.process.open(wxpid)
    wxNull_address = pymem.memory.allocate_memory(process_handle, 0x100)
    buffer_address = pymem.memory.allocate_memory(process_handle, 0x3B0)
    wxid_struct_address, wxid_address = WxBaseStruct(process_handle, wxid)
    msg_struct_address, msg_address = WxBaseStruct(process_handle, msg)
    process_WeChatWin_handle = pymem.process.module_from_name(process_handle, "WeChatWin.dll")
    call_address = process_WeChatWin_handle.lpBaseOfDll + 0x521D30
    call_p_address = pymem.memory.allocate_memory(process_handle, 4)
    pymem.memory.write_int(process_handle, call_p_address, call_address)
    format_code = '''
    57
    8D05 {wxNull}
    6A 01
    50
    8D3D {wxTextMsg}
    57
    8D15 {wxWxid}
    8D0D {buffer}
    FF15 {callAddress}
    83C4 0C
    5F
    C3
    '''
    shellcode = format_code.format(wxNull=convert_addr(wxNull_address), 
                wxTextMsg=convert_addr(msg_struct_address),
                wxWxid=convert_addr(wxid_struct_address),
                buffer=convert_addr(buffer_address),
                callAddress=convert_addr(call_p_address))
    shellcode = bytes.fromhex(shellcode.replace(' ', '').replace('\n', ''))
    shellcode_address = pymem.memory.allocate_memory(process_handle, len(shellcode)+5)
    pymem.ressources.kernel32.WriteProcessMemory(process_handle, shellcode_address, shellcode, len(shellcode), None)
    thread_h = start_thread(process_handle, shellcode_address)
    time.sleep(0.5)
    pymem.memory.free_memory(process_handle, wxNull_address)
    pymem.memory.free_memory(process_handle, buffer_address)
    pymem.memory.free_memory(process_handle, wxid_struct_address)
    pymem.memory.free_memory(process_handle, wxid_address)
    pymem.memory.free_memory(process_handle, msg_struct_address)
    pymem.memory.free_memory(process_handle, msg_address)
    pymem.memory.free_memory(process_handle, call_p_address)
    pymem.memory.free_memory(process_handle, shellcode_address)
    pymem.process.close_handle(process_handle)
if __name__ == "__main__":
    wxpid = 16892
    wxid = "filehelper"
    msg = "python test"
    main(wxpid, wxid, msg)

第三次優化

直接在Python里寫匯編，然后自動轉機器碼寫入內存。使用的是Python的keystone庫

# -*- coding: utf-8 -*-
import os
import pymem
import ctypes
import time
from keystone import Ks, KS_ARCH_X86, KS_MODE_32
def asm2code(asm_code, syntax=0):
    ks = Ks(KS_ARCH_X86, KS_MODE_32)
    bytes_code, _ = ks.asm(asm_code, as_bytes=True)
    return bytes_code
def WxBaseStruct(process_handle, content):
    struct_address = pymem.memory.allocate_memory(process_handle, 20)
    bcontent = content.encode('utf-16le')
    content_address = pymem.memory.allocate_memory(process_handle, len(bcontent)+16)
    pymem.ressources.kernel32.WriteProcessMemory(process_handle, content_address, bcontent, len(bcontent), None)
    pymem.memory.write_int(process_handle, struct_address, content_address)
    pymem.memory.write_int(process_handle, struct_address+0x4, len(content))
    pymem.memory.write_int(process_handle, struct_address+0x8, len(content)*2)
    pymem.memory.write_int(process_handle, struct_address+0xC, 0)
    pymem.memory.write_int(process_handle, struct_address+0x10, 0)
    return struct_address, content_address
def start_thread(process_handle, address, params=None):
    params = params or 0
    NULL_SECURITY_ATTRIBUTES = ctypes.cast(0, pymem.ressources.structure.LPSECURITY_ATTRIBUTES)
    thread_h = pymem.ressources.kernel32.CreateRemoteThread(
        process_handle,
        NULL_SECURITY_ATTRIBUTES,
        0,
        address,
        params,
        0,
        ctypes.byref(ctypes.c_ulong(0))
    )
    last_error = ctypes.windll.kernel32.GetLastError()
    if last_error:
        pymem.logger.warning('Got an error in start thread, code: %s' % last_error)
    pymem.ressources.kernel32.WaitForSingleObject(thread_h, -1)
    return thread_h
def main(wxpid, wxid, msg):
    process_handle = pymem.process.open(wxpid)
    wxNull_address = pymem.memory.allocate_memory(process_handle, 0x100)
    buffer_address = pymem.memory.allocate_memory(process_handle, 0x3B0)
    wxid_struct_address, wxid_address = WxBaseStruct(process_handle, wxid)
    msg_struct_address, msg_address = WxBaseStruct(process_handle, msg)
    process_WeChatWin_handle = pymem.process.module_from_name(process_handle, "WeChatWin.dll")
    call_address = process_WeChatWin_handle.lpBaseOfDll + 0x521D30
    call_p_address = pymem.memory.allocate_memory(process_handle, 4)
    pymem.memory.write_int(process_handle, call_p_address, call_address)
    format_asm_code = '''
    push edi;
    lea eax,dword ptr ds:[{wxNull:#02x}];
    push 0x1;
    push eax;
    lea edi,dword ptr ds:[{wxTextMsg:#02x}];
    push edi;
    lea edx,dword ptr ds:[{wxWxid:#02x}];
    lea ecx,dword ptr ds:[{buffer:#02x}];
    call dword ptr ds:[{callAddress:#02x}];
    add esp, 0xC;
    pop edi;
    ret;
    '''
    asm_code = format_asm_code.format(wxNull=wxNull_address, 
                wxTextMsg=msg_struct_address,
                wxWxid=wxid_struct_address,
                buffer=buffer_address,
                callAddress=call_p_address)
    shellcode = asm2code(asm_code.encode())
    shellcode_address = pymem.memory.allocate_memory(process_handle, len(shellcode)+5)
    pymem.ressources.kernel32.WriteProcessMemory(process_handle, shellcode_address, shellcode, len(shellcode), None)
    thread_h = start_thread(process_handle, shellcode_address)
    time.sleep(0.5)
    pymem.memory.free_memory(process_handle, wxNull_address)
    pymem.memory.free_memory(process_handle, buffer_address)
    pymem.memory.free_memory(process_handle, wxid_struct_address)
    pymem.memory.free_memory(process_handle, wxid_address)
    pymem.memory.free_memory(process_handle, msg_struct_address)
    pymem.memory.free_memory(process_handle, msg_address)
    pymem.memory.free_memory(process_handle, call_p_address)
    pymem.memory.free_memory(process_handle, shellcode_address)
    pymem.process.close_handle(process_handle)
if __name__ == "__main__":
    wxpid = 18604
    wxid = "filehelper"
    msg = "python test msg"
    main(wxpid, wxid, msg)

到此這篇關于Python實現向好友發送微信消息優化篇的文章就介紹到這了,更多相關Python微信消息內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: