詳解Matlab如何繪制圓角半透明圖例

更新時間：2022年05月20日 11:07:22 作者：slandarer

目前MATLAB的legend圖例是不支持圓角和半透明的，所以本文將自制實現圓角半透明圖例。文中的示例代碼講解詳細，需要的可以參考一下

基本使用

繼續假設我們編寫了如下代碼：

t=0:0.35:3*pi;
plot(t,sin(t),'Marker','d','LineWidth',2,'Color',[102,194,166]./255)
hold on
plot(t,cos(t./2),'Marker','o','LineWidth',2,'Color',[252,140,97]./255)
plot(t,t,'Marker','^','LineWidth',2,'Color',[140,161,204]./255)

lgd=legend('y=sin(t)','y=cos(t/2)','y=t');
lgd.Location='northwest';
lgd.FontSize=13;
title(lgd,'Func','FontSize',14)

繪圖結果如下：

在代碼最后加上一行：

prettyLegend()

不過這樣只體現了圓角的性質，并沒有體現其半透明，要體現其半透明的性質坐標區域最好不是白色的，哎我們直接和上一篇一結合不就好了(Matlab繪制酷炫坐標區域的方法詳解)

例如最后加上兩行(注意請將圖例修飾加在坐標區域修飾后面)：

prettyAxes().dark2()

prettyLegend()

prettyAxes().dark()

prettyLegend()

使用說明

當拖拽圖例到其他位置，圖例框會跟隨：

當調整圖窗大小導致圖例框大小異常時，在圖例附近晃動鼠標即可修復大?。?/p>

完整代碼

function legendBox=prettyLegend(ax)
if nargin<1
    ax=gca;
end
hold on
legendTitleColor=[0,0,0];
if mean(ax.Color)<0.5
    legendTitleColor=[1,1,1];
    ax.Legend.TextColor=[1,1,1];
end

ax.Legend.AutoUpdate='on';
% ax.Legend.FontSize=11;
% ax.Legend.Title.FontSize=14;
ax.Legend.AutoUpdate='off';

% 如果在圖窗外則不設框
if ~isempty(regexpi(ax.Legend.Location,'out', 'once'))
    ax.Legend.Box='off';
    lgdPos=ax.Legend.Position;
    % 依據legend所處figure坐標和axes范圍計算Legend坐標
    xyMin=[(lgdPos(1)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
        (lgdPos(2)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
    xyMax=[(lgdPos(1)+lgdPos(3)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
        (lgdPos(2)+lgdPos(4)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
    ax.Legend.UserData.NewBkg=[];
    % 隱藏原標題
    ax.Legend.Title.Visible='off';
    % 繪制新legend標題
    ax.Legend.UserData.NewTitle=text(ax,xyMin(1),xyMax(2),['  ',ax.Legend.Title.String],...
        'FontSize',ax.Legend.Title.FontSize,'VerticalAlignment','top','FontWeight','bold','Color',legendTitleColor);
else

    ax.Legend.Box='off';
    lgdPos=ax.Legend.Position;
    % 依據legend所處figure坐標和axes范圍計算Legend坐標
    xyMin=[(lgdPos(1)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
        (lgdPos(2)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
    xyMax=[(lgdPos(1)+lgdPos(3)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
        (lgdPos(2)+lgdPos(4)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
    xDiff=(xyMax(1)-xyMin(1));
    yDiff=(xyMax(2)-xyMin(2));
    % 繪制圓角矩形作為新框
    ax.Legend.UserData.NewBkg=rectangle(ax,'Position',[xyMin,xDiff,yDiff],'Curvature',0.2,...
        'LineWidth',1.2,'EdgeColor',[0.39 0.41 0.39],'FaceColor',[1 1 1 .2]);
    %ax.Legend.Title.FontSize=14;
    % 隱藏原標題
    ax.Legend.Title.Visible='off';
    % 繪制新legend標題
    ax.Legend.UserData.NewTitle=text(ax,xyMin(1),xyMax(2),['  ',ax.Legend.Title.String],...
        'FontSize',ax.Legend.Title.FontSize,'VerticalAlignment','top','FontWeight','bold','Color',legendTitleColor);
end

% 返回值
legendBox.Title=ax.Legend.UserData.NewTitle;
legendBox.Box=ax.Legend.UserData.NewBkg;

oriFunc=ax.Parent.WindowButtonMotionFcn;
set(ax.Parent,'WindowButtonMotionFcn',@bt_move);% 設置鼠標移動回調
    function bt_move(~,~)
        oriFunc();
        if ~isempty(regexpi(ax.Legend.Location,'out', 'once'))
            lgdPos=ax.Legend.Position;
            % 依據legend所處figure坐標和axes范圍計算Legend坐標
            xyMin=[(lgdPos(1)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
                (lgdPos(2)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
            xyMax=[(lgdPos(1)+lgdPos(3)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
                (lgdPos(2)+lgdPos(4)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
            xyMin(1)=max(xyMin(1),ax.XLim(1));
            xyMin(2)=max(xyMin(2),ax.YLim(1));
            xyMax(1)=min(xyMax(1),ax.XLim(2));
            xyMax(2)=min(xyMax(2),ax.YLim(2));
            % 重設位置屬性
            ax.Legend.UserData.NewTitle.Position=[xyMin(1),xyMax(2)];
        else
            lgdPos=ax.Legend.Position;
            % 依據legend所處figure坐標和axes范圍計算Legend坐標
            xyMin=[(lgdPos(1)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
                (lgdPos(2)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
            xyMax=[(lgdPos(1)+lgdPos(3)-ax.Position(1))/ax.Position(3)*(ax.XLim(2)-ax.XLim(1))+ax.XLim(1),...
                (lgdPos(2)+lgdPos(4)-ax.Position(2))/ax.Position(4)*(ax.YLim(2)-ax.YLim(1))+ax.YLim(1)];
            xyMin(1)=max(xyMin(1),ax.XLim(1));
            xyMin(2)=max(xyMin(2),ax.YLim(1));
            xyMax(1)=min(xyMax(1),ax.XLim(2));
            xyMax(2)=min(xyMax(2),ax.YLim(2));
            xDiff=(xyMax(1)-xyMin(1));
            yDiff=(xyMax(2)-xyMin(2));
            % 重設位置屬性
            ax.Legend.UserData.NewBkg.Position=[xyMin,xDiff,yDiff];
            ax.Legend.UserData.NewTitle.Position=[xyMin(1),xyMax(2)];
        end
    end
end

到此這篇關于詳解Matlab如何繪制圓角半透明圖例的文章就介紹到這了,更多相關Matlab圓角半透明圖例內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: