python神經網絡facenet人臉檢測及keras實現

更新時間：2022年05月10日 18:36:07 作者：Bubbliiiing

這篇文章主要為大家介紹了python神經網絡facenet人臉檢測及keras實現，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪

什么是facenet

最近學了我最喜歡的mtcnn，可是光有人臉有啥用啊，咱得知道who啊，開始facenet提取特征之旅。

谷歌人臉檢測算法，發表于 CVPR 2015，利用相同人臉在不同角度等姿態的照片下有高內聚性，不同人臉有低耦合性，提出使用 cnn + triplet mining 方法，在 LFW 數據集上準確度達到 99.63%。

通過 CNN 將人臉映射到歐式空間的特征向量上，實質上：不同圖片人臉特征的距離較大；通過相同個體的人臉的距離，總是小于不同個體的人臉這一先驗知識訓練網絡。

測試時只需要計算人臉特征EMBEDDING，然后計算距離使用閾值即可判定兩張人臉照片是否屬于相同的個體。

簡單來講，在使用階段，facenet即是：

1、輸入一張人臉圖片

2、通過深度學習網絡提取特征

3、L2標準化

4、得到128維特征向量。

代碼下載鏈接：https://pan.baidu.com/s/1T2b5u2mZ9yMtKt3TvLxTaw

提取碼：xmg0

Inception-ResNetV1

Inception-ResNetV1是facenet使用的主干網絡。

它的結構很有意思！

如圖所示為整個網絡的主干結構：

可以看到里面的結構分為幾個重要的部分

1、stem

2、Inception-resnet-A

3、Inception-resnet-B

4、Inception-resnet-C

1、Stem的結構：

在facenet里，它的Input為160x160x3大小，輸入后進行：

兩次卷積 -> 一次最大池化 -> 兩次卷積

python實現代碼如下：

inputs = Input(shape=input_shape)
# 160,160,3 -> 77,77,64
x = conv2d_bn(inputs, 32, 3, strides=2, padding='valid', name='Conv2d_1a_3x3')
x = conv2d_bn(x, 32, 3, padding='valid', name='Conv2d_2a_3x3')
x = conv2d_bn(x, 64, 3, name='Conv2d_2b_3x3')
# 77,77,64 -> 38,38,64
x = MaxPooling2D(3, strides=2, name='MaxPool_3a_3x3')(x)
# 38,38,64 -> 17,17,256
x = conv2d_bn(x, 80, 1, padding='valid', name='Conv2d_3b_1x1')
x = conv2d_bn(x, 192, 3, padding='valid', name='Conv2d_4a_3x3')
x = conv2d_bn(x, 256, 3, strides=2, padding='valid', name='Conv2d_4b_3x3')

2、Inception-resnet-A的結構：

Inception-resnet-A的結構分為四個分支

1、未經處理直接輸出

2、經過一次1x1的32通道的卷積處理

3、經過一次1x1的32通道的卷積處理和一次3x3的32通道的卷積處理

4、經過一次1x1的32通道的卷積處理和兩次3x3的32通道的卷積處理

234步的結果堆疊后j進行一次卷積，并與第一步的結果相加，實質上這是一個殘差網絡結構。

實現代碼如下：

branch_0 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_1x1', 0))
branch_1 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_0a_1x1', 1))
branch_1 = conv2d_bn(branch_1, 32, 3, name=name_fmt('Conv2d_0b_3x3', 1))
branch_2 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_0a_1x1', 2))
branch_2 = conv2d_bn(branch_2, 32, 3, name=name_fmt('Conv2d_0b_3x3', 2))
branch_2 = conv2d_bn(branch_2, 32, 3, name=name_fmt('Conv2d_0c_3x3', 2))
branches = [branch_0, branch_1, branch_2]
mixed = Concatenate(axis=channel_axis, name=name_fmt('Concatenate'))(branches)
up = conv2d_bn(mixed,K.int_shape(x)[channel_axis],1,activation=None,use_bias=True,
                name=name_fmt('Conv2d_1x1'))
up = Lambda(scaling,
            output_shape=K.int_shape(up)[1:],
            arguments={'scale': scale})(up)
x = add([x, up])
if activation is not None:
    x = Activation(activation, name=name_fmt('Activation'))(x)

3、Inception-resnet-B的結構：

Inception-resnet-B的結構分為四個分支

1、未經處理直接輸出

2、經過一次1x1的128通道的卷積處理

3、經過一次1x1的128通道的卷積處理、一次1x7的128通道的卷積處理和一次7x1的128通道的卷積處理

23步的結果堆疊后j進行一次卷積，并與第一步的結果相加，實質上這是一個殘差網絡結構。

實現代碼如下：

branch_0 = conv2d_bn(x, 128, 1, name=name_fmt('Conv2d_1x1', 0))
branch_1 = conv2d_bn(x, 128, 1, name=name_fmt('Conv2d_0a_1x1', 1))
branch_1 = conv2d_bn(branch_1, 128, [1, 7], name=name_fmt('Conv2d_0b_1x7', 1))
branch_1 = conv2d_bn(branch_1, 128, [7, 1], name=name_fmt('Conv2d_0c_7x1', 1))
branches = [branch_0, branch_1]
mixed = Concatenate(axis=channel_axis, name=name_fmt('Concatenate'))(branches)
up = conv2d_bn(mixed,K.int_shape(x)[channel_axis],1,activation=None,use_bias=True,
                name=name_fmt('Conv2d_1x1'))
up = Lambda(scaling,
            output_shape=K.int_shape(up)[1:],
            arguments={'scale': scale})(up)
x = add([x, up])
if activation is not None:
    x = Activation(activation, name=name_fmt('Activation'))(x)

4、Inception-resnet-C的結構：

Inception-resnet-B的結構分為四個分支

1、未經處理直接輸出

2、經過一次1x1的128通道的卷積處理

3、經過一次1x1的192通道的卷積處理、一次1x3的192通道的卷積處理和一次3x1的128通道的卷積處理

23步的結果堆疊后j進行一次卷積，并與第一步的結果相加，實質上這是一個殘差網絡結構。

實現代碼如下：

branch_0 = conv2d_bn(x, 192, 1, name=name_fmt('Conv2d_1x1', 0))
branch_1 = conv2d_bn(x, 192, 1, name=name_fmt('Conv2d_0a_1x1', 1))
branch_1 = conv2d_bn(branch_1, 192, [1, 3], name=name_fmt('Conv2d_0b_1x3', 1))
branch_1 = conv2d_bn(branch_1, 192, [3, 1], name=name_fmt('Conv2d_0c_3x1', 1))
branches = [branch_0, branch_1]
mixed = Concatenate(axis=channel_axis, name=name_fmt('Concatenate'))(branches)
up = conv2d_bn(mixed,K.int_shape(x)[channel_axis],1,activation=None,use_bias=True,
                name=name_fmt('Conv2d_1x1'))
up = Lambda(scaling,
            output_shape=K.int_shape(up)[1:],
            arguments={'scale': scale})(up)
x = add([x, up])
if activation is not None:
    x = Activation(activation, name=name_fmt('Activation'))(x)

5、全部代碼

from functools import partial
from keras.models import Model
from keras.layers import Activation
from keras.layers import BatchNormalization
from keras.layers import Concatenate
from keras.layers import Conv2D
from keras.layers import Dense
from keras.layers import Dropout
from keras.layers import GlobalAveragePooling2D
from keras.layers import Input
from keras.layers import Lambda
from keras.layers import MaxPooling2D
from keras.layers import add
from keras import backend as K
def scaling(x, scale):
    return x * scale
def _generate_layer_name(name, branch_idx=None, prefix=None):
    if prefix is None:
        return None
    if branch_idx is None:
        return '_'.join((prefix, name))
    return '_'.join((prefix, 'Branch', str(branch_idx), name))
def conv2d_bn(x,filters,kernel_size,strides=1,padding='same',activation='relu',use_bias=False,name=None):
    x = Conv2D(filters,
               kernel_size,
               strides=strides,
               padding=padding,
               use_bias=use_bias,
               name=name)(x)
    if not use_bias:
        x = BatchNormalization(axis=3, momentum=0.995, epsilon=0.001,
                               scale=False, name=_generate_layer_name('BatchNorm', prefix=name))(x)
    if activation is not None:
        x = Activation(activation, name=_generate_layer_name('Activation', prefix=name))(x)
    return x
def _inception_resnet_block(x, scale, block_type, block_idx, activation='relu'):
    channel_axis = 3
    if block_idx is None:
        prefix = None
    else:
        prefix = '_'.join((block_type, str(block_idx)))
    name_fmt = partial(_generate_layer_name, prefix=prefix)
    if block_type == 'Block35':
        branch_0 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_1x1', 0))
        branch_1 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_0a_1x1', 1))
        branch_1 = conv2d_bn(branch_1, 32, 3, name=name_fmt('Conv2d_0b_3x3', 1))
        branch_2 = conv2d_bn(x, 32, 1, name=name_fmt('Conv2d_0a_1x1', 2))
        branch_2 = conv2d_bn(branch_2, 32, 3, name=name_fmt('Conv2d_0b_3x3', 2))
        branch_2 = conv2d_bn(branch_2, 32, 3, name=name_fmt('Conv2d_0c_3x3', 2))
        branches = [branch_0, branch_1, branch_2]
    elif block_type == 'Block17':
        branch_0 = conv2d_bn(x, 128, 1, name=name_fmt('Conv2d_1x1', 0))
        branch_1 = conv2d_bn(x, 128, 1, name=name_fmt('Conv2d_0a_1x1', 1))
        branch_1 = conv2d_bn(branch_1, 128, [1, 7], name=name_fmt('Conv2d_0b_1x7', 1))
        branch_1 = conv2d_bn(branch_1, 128, [7, 1], name=name_fmt('Conv2d_0c_7x1', 1))
        branches = [branch_0, branch_1]
    elif block_type == 'Block8':
        branch_0 = conv2d_bn(x, 192, 1, name=name_fmt('Conv2d_1x1', 0))
        branch_1 = conv2d_bn(x, 192, 1, name=name_fmt('Conv2d_0a_1x1', 1))
        branch_1 = conv2d_bn(branch_1, 192, [1, 3], name=name_fmt('Conv2d_0b_1x3', 1))
        branch_1 = conv2d_bn(branch_1, 192, [3, 1], name=name_fmt('Conv2d_0c_3x1', 1))
        branches = [branch_0, branch_1]
    mixed = Concatenate(axis=channel_axis, name=name_fmt('Concatenate'))(branches)
    up = conv2d_bn(mixed,K.int_shape(x)[channel_axis],1,activation=None,use_bias=True,
                   name=name_fmt('Conv2d_1x1'))
    up = Lambda(scaling,
                output_shape=K.int_shape(up)[1:],
                arguments={'scale': scale})(up)
    x = add([x, up])
    if activation is not None:
        x = Activation(activation, name=name_fmt('Activation'))(x)
    return x
def InceptionResNetV1(input_shape=(160, 160, 3),
                      classes=128,
                      dropout_keep_prob=0.8):
    channel_axis = 3
    inputs = Input(shape=input_shape)
    # 160,160,3 -> 77,77,64
    x = conv2d_bn(inputs, 32, 3, strides=2, padding='valid', name='Conv2d_1a_3x3')
    x = conv2d_bn(x, 32, 3, padding='valid', name='Conv2d_2a_3x3')
    x = conv2d_bn(x, 64, 3, name='Conv2d_2b_3x3')
    # 77,77,64 -> 38,38,64
    x = MaxPooling2D(3, strides=2, name='MaxPool_3a_3x3')(x)
    # 38,38,64 -> 17,17,256
    x = conv2d_bn(x, 80, 1, padding='valid', name='Conv2d_3b_1x1')
    x = conv2d_bn(x, 192, 3, padding='valid', name='Conv2d_4a_3x3')
    x = conv2d_bn(x, 256, 3, strides=2, padding='valid', name='Conv2d_4b_3x3')
    # 5x Block35 (Inception-ResNet-A block):
    for block_idx in range(1, 6):
        x = _inception_resnet_block(x,scale=0.17,block_type='Block35',block_idx=block_idx)
    # Reduction-A block:
    # 17,17,256 -> 8,8,896
    name_fmt = partial(_generate_layer_name, prefix='Mixed_6a')
    branch_0 = conv2d_bn(x, 384, 3,strides=2,padding='valid',name=name_fmt('Conv2d_1a_3x3', 0))
    branch_1 = conv2d_bn(x, 192, 1, name=name_fmt('Conv2d_0a_1x1', 1))
    branch_1 = conv2d_bn(branch_1, 192, 3, name=name_fmt('Conv2d_0b_3x3', 1))
    branch_1 = conv2d_bn(branch_1,256,3,strides=2,padding='valid',name=name_fmt('Conv2d_1a_3x3', 1))
    branch_pool = MaxPooling2D(3,strides=2,padding='valid',name=name_fmt('MaxPool_1a_3x3', 2))(x)
    branches = [branch_0, branch_1, branch_pool]
    x = Concatenate(axis=channel_axis, name='Mixed_6a')(branches)
    # 10x Block17 (Inception-ResNet-B block):
    for block_idx in range(1, 11):
        x = _inception_resnet_block(x,
                                    scale=0.1,
                                    block_type='Block17',
                                    block_idx=block_idx)
    # Reduction-B block
    # 8,8,896 -> 3,3,1792
    name_fmt = partial(_generate_layer_name, prefix='Mixed_7a')
    branch_0 = conv2d_bn(x, 256, 1, name=name_fmt('Conv2d_0a_1x1', 0))
    branch_0 = conv2d_bn(branch_0,384,3,strides=2,padding='valid',name=name_fmt('Conv2d_1a_3x3', 0))
    branch_1 = conv2d_bn(x, 256, 1, name=name_fmt('Conv2d_0a_1x1', 1))
    branch_1 = conv2d_bn(branch_1,256,3,strides=2,padding='valid',name=name_fmt('Conv2d_1a_3x3', 1))
    branch_2 = conv2d_bn(x, 256, 1, name=name_fmt('Conv2d_0a_1x1', 2))
    branch_2 = conv2d_bn(branch_2, 256, 3, name=name_fmt('Conv2d_0b_3x3', 2))
    branch_2 = conv2d_bn(branch_2,256,3,strides=2,padding='valid',name=name_fmt('Conv2d_1a_3x3', 2))
    branch_pool = MaxPooling2D(3,strides=2,padding='valid',name=name_fmt('MaxPool_1a_3x3', 3))(x)
    branches = [branch_0, branch_1, branch_2, branch_pool]
    x = Concatenate(axis=channel_axis, name='Mixed_7a')(branches)
    # 5x Block8 (Inception-ResNet-C block):
    for block_idx in range(1, 6):
        x = _inception_resnet_block(x,
                                    scale=0.2,
                                    block_type='Block8',
                                    block_idx=block_idx)
    x = _inception_resnet_block(x,scale=1.,activation=None,block_type='Block8',block_idx=6)
    # 平均池化
    x = GlobalAveragePooling2D(name='AvgPool')(x)
    x = Dropout(1.0 - dropout_keep_prob, name='Dropout')(x)
    # 全連接層到128
    x = Dense(classes, use_bias=False, name='Bottleneck')(x)
    bn_name = _generate_layer_name('BatchNorm', prefix='Bottleneck')
    x = BatchNormalization(momentum=0.995, epsilon=0.001, scale=False,
                           name=bn_name)(x)
    # 創建模型
    model = Model(inputs, x, name='inception_resnet_v1')
    return model

檢測人臉并實現比較：

利用opencv自帶的cv2.CascadeClassifier檢測人臉并實現人臉的比較：根目錄擺放方式如下：

demo文件如下：

import numpy as np
import cv2
from net.inception import InceptionResNetV1
from keras.models import load_model
import face_recognition
#---------------------------------#
#   圖片預處理
#   高斯歸一化
#---------------------------------#
def pre_process(x):
    if x.ndim == 4:
        axis = (1, 2, 3)
        size = x[0].size
    elif x.ndim == 3:
        axis = (0, 1, 2)
        size = x.size
    else:
        raise ValueError('Dimension should be 3 or 4')
    mean = np.mean(x, axis=axis, keepdims=True)
    std = np.std(x, axis=axis, keepdims=True)
    std_adj = np.maximum(std, 1.0/np.sqrt(size))
    y = (x - mean) / std_adj
    return y
#---------------------------------#
#   l2標準化
#---------------------------------#
def l2_normalize(x, axis=-1, epsilon=1e-10):
    output = x / np.sqrt(np.maximum(np.sum(np.square(x), axis=axis, keepdims=True), epsilon))
    return output
#---------------------------------#
#   計算128特征值
#---------------------------------#
def calc_128_vec(model,img):
    face_img = pre_process(img)
    pre = model.predict(face_img)
    pre = l2_normalize(np.concatenate(pre))
    pre = np.reshape(pre,[1,128])
    return pre
#---------------------------------#
#   獲取人臉框
#---------------------------------#
def get_face_img(cascade,filepaths,margin):
    aligned_images = []
    img = cv2.imread(filepaths)
    img = cv2.cvtColor(img,cv2.COLOR_BGRA2RGB)
    faces = cascade.detectMultiScale(img,
                                        scaleFactor=1.1,
                                        minNeighbors=3)
    (x, y, w, h) = faces[0]
    print(x, y, w, h)
    cropped = img[y-margin//2:y+h+margin//2,
                    x-margin//2:x+w+margin//2, :]
    aligned = cv2.resize(cropped, (160, 160))
    aligned_images.append(aligned)
    return np.array(aligned_images)
#---------------------------------#
#   計算人臉距離
#---------------------------------#
def face_distance(face_encodings, face_to_compare):
    if len(face_encodings) == 0:
        return np.empty((0))
    return np.linalg.norm(face_encodings - face_to_compare, axis=1)
if __name__ == "__main__":
    cascade_path = './model/haarcascade_frontalface_alt2.xml'
    cascade = cv2.CascadeClassifier(cascade_path)
    image_size = 160
    model = InceptionResNetV1()
    # model.summary()
    model_path = './model/facenet_keras.h5'
    model.load_weights(model_path)
    img1 = get_face_img(cascade,r"img/Larry_Page_0000.jpg",10)
    img2 = get_face_img(cascade,r"img/Larry_Page_0001.jpg",10)
    img3 = get_face_img(cascade,r"img/Mark_Zuckerberg_0000.jpg",10)
    print(face_distance(calc_128_vec(model,img1),calc_128_vec(model,img2)))
    print(face_distance(calc_128_vec(model,img2),calc_128_vec(model,img3)))

實現效果為：

[0.6534328]
[1.3536944]

以上就是python神經網絡facenet人臉檢測及keras實現的詳細內容，更多關于facenet人臉檢測keras實現的資料請關注腳本之家其它相關文章！

您可能感興趣的文章:

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

python神經網絡facenet人臉檢測及keras實現

目錄

什么是facenet

Inception-ResNetV1

1、Stem的結構：

2、Inception-resnet-A的結構：

3、Inception-resnet-B的結構：

4、Inception-resnet-C的結構：

5、全部代碼

檢測人臉并實現比較：

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线 免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

python神經網絡facenet人臉檢測及keras實現

目錄

什么是facenet

Inception-ResNetV1

1、Stem的結構：

2、Inception-resnet-A的結構：

3、Inception-resnet-B的結構：

4、Inception-resnet-C的結構：

5、全部代碼

檢測人臉并實現比較：

相關文章

最新評論

大家感興趣的內容

最近更新的內容

常用在線小工具

国产无遮挡裸体免费直播视频,久久精品国产蜜臀av,动漫在线视频一区二区,欧亚日韩一区二区三区,久艹在线免费视频,国产精品美女网站免费,正在播放 97超级视频在线观看,斗破苍穹年番在线观看免费,51最新乱码中文字幕

3、Inception-resnet-B的結構：

4、Inception-resnet-C的結構：

5、全部代碼