JavaScript正則表達式中g(shù)標志詳解

更新時間：2022年03月18日 11:47:10 作者：伍陸柒

正則的思想都是一樣的,但是具體的寫法會有所不同,下面這篇文章主要給大家介紹了關于JavaScript正則表達式中g(shù)標志的相關資料,文中通過實例代碼介紹的非常詳細,需要的朋友可以參考下

緣起

有一天在思否社區看到有個問題，大致描述如下

const list = ['a', 'b', '-', 'c', 'd'];
const reg = /[a-z]/g;
const letters = list.filter(i => reg.test(i));

// letters === ['a', 'c'];
// 如果正則不使用`g`標志可以得到所有的字母
// 為什么加入`g`之后就不可以了

對問題而言，遍歷中的i就是一個字符，不需要用到g。

但是就我對正則的理解（過于淺?。└杏X上有沒有g(shù)（只是全局搜索，不會匹配到就停下來）應該不影響，激發了我的好奇心。

上面題的建議寫法如下

const reg = /[a-z]/g;
reg.test('a'); // => true
reg.test('a'); // => false
reg.test('a'); // => true
reg.test('a'); // => false
reg.test('a'); // => true

解密過程

首先可以確定的表現一定是g導致的

搜索引擎

打開 MDN 仔細查看g標志的作用，得到結論和我的理解無二。

我猜想應該就是g可能啟用了某種緩存，又因為reg相對過濾器是全局變量，我將代碼改為：

const list = ['a', 'b', '-', 'c', 'd'];
const letters = list.filter(i => /[a-z]/g.test(i));

// letters === ['a', 'b', 'c', 'd'];

將正則聲明到每一次遍歷，得到結論就是正確的，驗證了我的猜想。也得到了，緩存就是正則中的某個地方

下面我找到對應的源碼來查看問題的原因

源碼層面

由于最近在看 Rust，所以使用 Rust 編寫的源碼查看

打開項目后，點擊.進入 vscode 模式，command+p 搜索 regexp 關鍵詞

進入test.rs文件，command+f 搜索/g可以找到在 90 行有個last_index()的測試

#[test]
fn last_index() {
    let mut context = Context::default();
    let init = r#"
        var regex = /[0-9]+(\.[0-9]+)?/g;
        "#;
    // forward 的作用：更改 context，并返回結果的字符串。
    eprintln!("{}", forward(&mut context, init));
    assert_eq!(forward(&mut context, "regex.lastIndex"), "0");
    assert_eq!(forward(&mut context, "regex.test('1.0foo')"), "true");
    assert_eq!(forward(&mut context, "regex.lastIndex"), "3");
    assert_eq!(forward(&mut context, "regex.test('1.0foo')"), "false");
    assert_eq!(forward(&mut context, "regex.lastIndex"), "0");
}

看到了有l(wèi)astIndex關鍵字，這里再已經大致猜到問題的原因了，g 標志存在匹配后的最后一個下標，導致出現問題。

我們將視線移入到mod.rs文件中，搜索test

在 631 行看到了fn test()方法

pub(crate) fn test(
    this: &JsValue,
    args: &[JsValue],
    context: &mut Context,
) -> JsResult<JsValue> {
    // 1. Let R be the this value.
    // 2. If Type(R) is not Object, throw a TypeError exception.
    let this = this.as_object().ok_or_else(|| {
        context
            .construct_type_error("RegExp.prototype.test method called on incompatible value")
    })?;

    // 3. Let string be ? ToString(S).
    let arg_str = args
        .get(0)
        .cloned()
        .unwrap_or_default()
        .to_string(context)?;

    // 4. Let match be ? RegExpExec(R, string).
    let m = Self::abstract_exec(this, arg_str, context)?;

    // 5. If match is not null, return true; else return false.
    if m.is_some() {
        Ok(JsValue::new(true))
    } else {
        Ok(JsValue::new(false))
    }
}

在test()方法中找到了Self::abstract_exec()方法

pub(crate) fn abstract_exec(
    this: &JsObject,
    input: JsString,
    context: &mut Context,
) -> JsResult<Option<JsObject>> {
    // 1. Assert: Type(R) is Object.
    // 2. Assert: Type(S) is String.

    // 3. Let exec be ? Get(R, "exec").
    let exec = this.get("exec", context)?;

    // 4. If IsCallable(exec) is true, then
    if let Some(exec) = exec.as_callable() {
        // a. Let result be ? Call(exec, R, ? S ?).
        let result = exec.call(&this.clone().into(), &[input.into()], context)?;

        // b. If Type(result) is neither Object nor Null, throw a TypeError exception.
        if !result.is_object() && !result.is_null() {
            return context.throw_type_error("regexp exec returned neither object nor null");
        }

        // c. Return result.
        return Ok(result.as_object().cloned());
    }

    // 5. Perform ? RequireInternalSlot(R, [[RegExpMatcher]]).
    if !this.is_regexp() {
        return context.throw_type_error("RegExpExec called with invalid value");
    }

    // 6. Return ? RegExpBuiltinExec(R, S).
    Self::abstract_builtin_exec(this, &input, context)
}

又在Self::abstract_exec()方法中找到了Self::abstract_builtin_exec()方法

pub(crate) fn abstract_builtin_exec(
    this: &JsObject,
    input: &JsString,
    context: &mut Context,
) -> JsResult<Option<JsObject>> {
    // 1. Assert: R is an initialized RegExp instance.
    let rx = {
        let obj = this.borrow();
        if let Some(rx) = obj.as_regexp() {
            rx.clone()
        } else {
            return context.throw_type_error("RegExpBuiltinExec called with invalid value");
        }
    };

    // 2. Assert: Type(S) is String.

    // 3. Let length be the number of code units in S.
    let length = input.encode_utf16().count();

    // 4. Let lastIndex be ?(? ToLength(? Get(R, "lastIndex"))).
    let mut last_index = this.get("lastIndex", context)?.to_length(context)?;

    // 5. Let flags be R.[[OriginalFlags]].
    let flags = &rx.original_flags;

    // 6. If flags contains "g", let global be true; else let global be false.
    let global = flags.contains('g');

    // 7. If flags contains "y", let sticky be true; else let sticky be false.
    let sticky = flags.contains('y');

    // 8. If global is false and sticky is false, set lastIndex to 0.
    if !global && !sticky {
        last_index = 0;
    }

    // 9. Let matcher be R.[[RegExpMatcher]].
    let matcher = &rx.matcher;

    // 10. If flags contains "u", let fullUnicode be true; else let fullUnicode be false.
    let unicode = flags.contains('u');

    // 11. Let matchSucceeded be false.
    // 12. Repeat, while matchSucceeded is false,
    let match_value = loop {
        // a. If lastIndex > length, then
        if last_index > length {
            // i. If global is true or sticky is true, then
            if global || sticky {
                // 1. Perform ? Set(R, "lastIndex", +0??, true).
                this.set("lastIndex", 0, true, context)?;
            }

            // ii. Return null.
            return Ok(None);
        }

        // b. Let r be matcher(S, lastIndex).
        // Check if last_index is a valid utf8 index into input.
        let last_byte_index = match String::from_utf16(
            &input.encode_utf16().take(last_index).collect::<Vec<u16>>(),
        ) {
            Ok(s) => s.len(),
            Err(_) => {
                return context
                    .throw_type_error("Failed to get byte index from utf16 encoded string")
            }
        };
        let r = matcher.find_from(input, last_byte_index).next();

        match r {
            // c. If r is failure, then
            None => {
                // i. If sticky is true, then
                if sticky {
                    // 1. Perform ? Set(R, "lastIndex", +0??, true).
                    this.set("lastIndex", 0, true, context)?;

                    // 2. Return null.
                    return Ok(None);
                }

                // ii. Set lastIndex to AdvanceStringIndex(S, lastIndex, fullUnicode).
                last_index = advance_string_index(input, last_index, unicode);
            }

            Some(m) => {
                // c. If r is failure, then
                #[allow(clippy::if_not_else)]
                if m.start() != last_index {
                    // i. If sticky is true, then
                    if sticky {
                        // 1. Perform ? Set(R, "lastIndex", +0??, true).
                        this.set("lastIndex", 0, true, context)?;

                        // 2. Return null.
                        return Ok(None);
                    }

                    // ii. Set lastIndex to AdvanceStringIndex(S, lastIndex, fullUnicode).
                    last_index = advance_string_index(input, last_index, unicode);
                // d. Else,
                } else {
                    //i. Assert: r is a State.
                    //ii. Set matchSucceeded to true.
                    break m;
                }
            }
        }
    };

    // 13. Let e be r's endIndex value.
    let mut e = match_value.end();

    // 14. If fullUnicode is true, then
    if unicode {
        // e is an index into the Input character list, derived from S, matched by matcher.
        // Let eUTF be the smallest index into S that corresponds to the character at element e of Input.
        // If e is greater than or equal to the number of elements in Input, then eUTF is the number of code units in S.
        // b. Set e to eUTF.
        e = input.split_at(e).0.encode_utf16().count();
    }

    // 15. If global is true or sticky is true, then
    if global || sticky {
        // a. Perform ? Set(R, "lastIndex", ??(e), true).
        this.set("lastIndex", e, true, context)?;
    }

    // 16. Let n be the number of elements in r's captures List. (This is the same value as 22.2.2.1's NcapturingParens.)
    let n = match_value.captures.len();
    // 17. Assert: n < 23^2 - 1.
    debug_assert!(n < 23usize.pow(2) - 1);

    // 18. Let A be ! ArrayCreate(n + 1).
    // 19. Assert: The mathematical value of A's "length" property is n + 1.
    let a = Array::array_create(n + 1, None, context)?;

    // 20. Perform ! CreateDataPropertyOrThrow(A, "index", ??(lastIndex)).
    a.create_data_property_or_throw("index", match_value.start(), context)
        .expect("this CreateDataPropertyOrThrow call must not fail");

    // 21. Perform ! CreateDataPropertyOrThrow(A, "input", S).
    a.create_data_property_or_throw("input", input.clone(), context)
        .expect("this CreateDataPropertyOrThrow call must not fail");

    // 22. Let matchedSubstr be the substring of S from lastIndex to e.
    let matched_substr = if let Some(s) = input.get(match_value.range()) {
        s
    } else {
        ""
    };

    // 23. Perform ! CreateDataPropertyOrThrow(A, "0", matchedSubstr).
    a.create_data_property_or_throw(0, matched_substr, context)
        .expect("this CreateDataPropertyOrThrow call must not fail");

    // 24. If R contains any GroupName, then
    // 25. Else,
    let named_groups = match_value.named_groups();
    let groups = if named_groups.clone().count() > 0 {
        // a. Let groups be ! OrdinaryObjectCreate(null).
        let groups = JsValue::from(JsObject::empty());

        // Perform 27.f here
        // f. If the ith capture of R was defined with a GroupName, then
        // i. Let s be the CapturingGroupName of the corresponding RegExpIdentifierName.
        // ii. Perform ! CreateDataPropertyOrThrow(groups, s, capturedValue).
        for (name, range) in named_groups {
            if let Some(range) = range {
                let value = if let Some(s) = input.get(range.clone()) {
                    s
                } else {
                    ""
                };

                groups
                    .to_object(context)?
                    .create_data_property_or_throw(name, value, context)
                    .expect("this CreateDataPropertyOrThrow call must not fail");
            }
        }
        groups
    } else {
        // a. Let groups be undefined.
        JsValue::undefined()
    };

    // 26. Perform ! CreateDataPropertyOrThrow(A, "groups", groups).
    a.create_data_property_or_throw("groups", groups, context)
        .expect("this CreateDataPropertyOrThrow call must not fail");

    // 27. For each integer i such that i ≥ 1 and i ≤ n, in ascending order, do
    for i in 1..=n {
        // a. Let captureI be ith element of r's captures List.
        let capture = match_value.group(i);

        let captured_value = match capture {
            // b. If captureI is undefined, let capturedValue be undefined.
            None => JsValue::undefined(),
            // c. Else if fullUnicode is true, then
            // d. Else,
            Some(range) => {
                if let Some(s) = input.get(range) {
                    s.into()
                } else {
                    "".into()
                }
            }
        };

        // e. Perform ! CreateDataPropertyOrThrow(A, ! ToString(??(i)), capturedValue).
        a.create_data_property_or_throw(i, captured_value, context)
            .expect("this CreateDataPropertyOrThrow call must not fail");
    }

    // 28. Return A.
    Ok(Some(a))
}

Self::abstract_builtin_exec()方法中存在global以及l(fā)ast_index這樣看來最終執行的方法就是在這里了，仔細查看該方法中的代碼（代碼寫的很詳細而且每一步都有注釋）

在第 12 步中：

lastIndex 超過文本長度且當 global 存在時將 lastIndex 置為 0
獲取匹配到的值（match_value）

如果未匹配到則置為advance_string_index()方法的返回值

advance_string_index()不在當前問題的考慮范圍 https://tc39.es/ecma262/#sec-...

第 13 步獲取匹配到的值的 endIndex

第 15 步將 lastIndex 置為 endIndex

至此也就整明白了g標志的含義，在正則的原型鏈中存在一個lastIndex，如果匹配為真時lastIndex不會重置為 0 ，下一次開始時繼承了上次位置，

結論

在問題代碼中分析

const reg = /[a-z]/g; // 聲明后，lastIndex 為 0
reg.test('a'); // => true；第一次匹配后，lastIndex 為 1
reg.test('a'); // => false；第二次匹配由于 lastIndex 為 1，且字符只有一個，得到 false，將 lastIndex 置為 0
reg.test('a'); // => true；下面依次循環前兩次的邏輯
reg.test('a'); // => false；
reg.test('a'); // => true；

到此這篇關于JavaScript正則表達式中g(shù)標志詳解的文章就介紹到這了,更多相關js正則中g(shù)標志內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: