SQL?Server?數據庫基礎編程詳解
Go批處理語句
用于同時執行多個語句
使用、切換數據庫
use master go
創建、刪除數據庫
方法1、
--判斷是否存在該數據庫,存在就刪除
if (exists (select * from sys.databases where name = 'testHome'))
drop database testHome
go
--創建數據庫,設置數據庫文件、日志文件保存目錄
create database testHome
on(
name = 'testHome',
filename = 'c:\data\students.mdf'
)
log on(
name = 'testHome_log',
filename = 'c:\data\testHome_log.ldf'
)
go方法2(設置文件大?。?、
if (exists (select * from sys.databases where name = 'testHome'))
drop database testHome
go
create database testHome
--默認就屬于primary主文件組,可省略
on primary (
--數據文件的具體描述
name = 'testHome_data', --主數據文件的邏輯名
fileName = 'c:\testHome_data.mdf', --主數據文件的物理名
size = 3MB, --主數據文件的初始大小
maxSize = 50MB, --主數據文件增長的最大值
fileGrowth = 10% --主數據文件的增長率
)
--日志文件的具體描述,各參數含義同上
log on (
name = 'testHome_log',
fileName = 'c:\testHome_log.ldf',
size = 1MB,
fileGrowth = 1MB
)
go方法3(設置次數據文件)、
if (exists (select * from sys.databases where name = 'testHome'))
drop database testHome
go
create database testHome
--默認就屬于primary主文件組,可省略
on primary (
--數據文件的具體描述
name = 'testHome_data', --主數據文件的邏輯名
fileName = 'c:\testHome_data.mdf', --主數據文件的物理名
size = 3MB, --主數據文件的初始大小
maxSize = 50MB, --主數據文件增長的最大值
fileGrowth = 10% --主數據文件的增長率
),
--次數據文件的具體描述
(
--數據文件的具體描述
name = 'testHome2_data', --主數據文件的邏輯名
fileName = 'c:\testHome2_data.mdf', --主數據文件的物理名
size = 2MB, --主數據文件的初始大小
maxSize = 50MB, --主數據文件增長的最大值
fileGrowth = 10% --主數據文件的增長率
)
--日志文件的具體描述,各參數含義同上
log on (
name = 'testHome_log',
fileName = 'c:\testHome_log.ldf',
size = 1MB,
fileGrowth = 1MB
),
(
name = 'testHome2_log',
fileName = 'c:\testHome2_log.ldf',
size = 1MB,
fileGrowth = 1MB
)
go基本數據類型
精確數字類型
類型 | 描述 |
bigint | bigint 數據類型用于整數值可能超過 int 數據類型支持范圍的情況,范圍:-2^63 到 2^63-1,存儲空間8字節 |
int | 整數數據類型,范圍在-2^31 到 2^31-1,存儲空間4字節 |
smallint | 整數,范圍在-2^15 到 2^15-1,存儲空間2字節 |
tinyint | 范圍在0 到 255,存儲空間1字節 |
bit | 可以取值為 1、0 或 NULL 的整數數據類型,每8個bit占一個字節,16bit就2個字節,24bit就3個字節 |
decimal | 帶固定精度和小數位數的數值數據類型,有效值從 - 10^38 +1 到 10^38 - 1 |
numeric | 同上 |
money | 貨幣或貨幣值的數據類型,范圍在-922,337,203,685,477.5808 到 922,337,203,685,477.5807 |
smallmoney | 貨幣類型,-214,748.3648 到 214,748.3647 |
近似數字類型
類型 | 描述 |
float | 表示浮點數值數據的大致數值數據類型。浮點數據為近似值;范圍-1.79E + 308 至 -2.23E - 308、0 以及 2.23E - 308 至 1.79E + 308 |
real | real 的 SQL-92 同義詞為 float(24),范圍在-3.40E + 38 至 -1.18E - 38、0 以及 1.18E - 38 至 3.40E + 38 |
日期時間類型
類型 | 描述 |
datetime | 表示某天的日期和時間的數據類型,范圍在1753 年 1 月 1 日到 9999 年 12 月 31 日 |
smalldatetime | 范圍在1900 年 1 月 1 日到 2079 年 6 月 6 日 |
字符串類型
類型 | 描述 |
char | 固定長度或可變長度的字符數據類型,范圍在范圍為 1 至 8,000字節 |
text | 最大長度為 2^31-1 |
varchar | 固定長度或可變長度的字符數據類型,最大存儲大小是 2^31-1 個字節 |
Unicode字符串類型
類型 | 描述 |
nchar | 字符數據類型,長度固定,在必須在 1 到 4,000 之間 |
nvarchar | 可變長度 Unicode 字符數據。最大存儲大小為 2^31-1 字節 |
ntext | 長度可變的 Unicode 數據,最大長度為 2^30 - 1 (1,073,741,823) 個字符 |
二進制字符串類型
二進制字符串類型
類型 | 描述 |
binary | 長度為 n 字節的固定長度二進制數據,范圍從 1 到 8,000 的值。存儲大小為 n 字節。 |
varbinary | 可變長度二進制數據。n 可以取從 1 到 8,000 的值。最大的存儲大小為 2^31-1 字節 |
image | 長度可變的二進制數據,從 0 到 2^31-1 (2,147,483,647) 個字節 |
判斷表或其他對象及列是否存在
--判斷某個表或?qū)ο笫欠翊嬖?
if (exists (select * from sys.objects where name = 'classes'))
print '存在';
go
if (exists (select * from sys.objects where object_id = object_id('student')))
print '存在';
go
if (object_id('student', 'U') is not null)
print '存在';
go
--判斷該列名是否存在,如果存在就刪除
if (exists (select * from sys.columns where object_id = object_id('student') and name = 'idCard'))
alter table student drop column idCard
go
if (exists (select * from information_schema.columns where table_name = 'student' and column_name = 'tel'))
alter table student drop column tel
go創建、刪除表
--判斷是否存在當前table
if (exists (select * from sys.objects where name = 'classes'))
drop table classes
go
create table classes(
id int primary key identity(1, 2),
name varchar(22) not null,
createDate datetime default getDate()
)
go
if (exists (select * from sys.objects where object_id = object_id('student')))
drop table student
go
--創建table
create table student(
id int identity(1, 1) not null,
name varchar(20),
age int,
sex bit,
cid int
)
go給表添加字段、修改字段、刪除字段
--添加字段
alter table student add address varchar(50) not null;
--修改字段
alter table student alter column address varchar(20);
--刪除字段
alter table student drop column number;
--添加多個字段
alter table student
add address varchar(22),
tel varchar(11),
idCard varchar(3);
--判斷該列名是否存在,如果存在就刪除
if (exists (select * from sys.columns where object_id = object_id('student') and name = 'idCard'))
alter table student drop column idCard
go
if (exists (select * from information_schema.columns where table_name = 'student' and column_name = 'tel'))
alter table student drop column tel
go添加、刪除約束
--添加新列、約束
alter table student
add number varchar(20) null constraint no_uk unique;
--增加主鍵
alter table student
add constraint pk_id primary key(id);
--添加外鍵約束
alter table student
add constraint fk_cid foreign key (cid) references classes(id)
go
--添加唯一約束
alter table student
add constraint name_uk unique(name);
--添加check約束
alter table student with nocheck
add constraint check_age check (age > 1);
alter table student
add constraint ck_age check (age >= 15 and age <= 50)
--添加默認約束
alter table student
add constraint sex_def default 1 for sex;
--添加一個包含默認值可以為空的列
alter table student
add createDate smalldatetime null
constraint createDate_def default getDate() with values;
----- 多個列、約束一起創建--------
alter table student add
/*添加id主鍵、自增*/
id int identity constraint id primary key,
/* 添加外鍵約束*/
number int null
constraint uNumber references classes(number),
/*默認約束*/
createDate decimal(3, 3)
constraint createDate default 2010-6-1
go
--刪除約束
alter table student drop constraint no_uk;插入數據
insert into classes(name) values('1班');
insert into classes values('2班', '2011-06-15');
insert into classes(name) values('3班');
insert into classes values('4班', default);
insert into student values('zhangsan', 22, 1, 1);
insert into student values('lisi', 25, 0, 1);
insert into student values('wangwu', 24, 1, 3);
insert into student values('zhaoliu', 23, 0, 3);
insert into student values('mazi', 21, 1, 5);
insert into student values('wangmazi', 28, 0, 5);
insert into student values('jason', null, 0, 5);
insert into student values(null, null, 0, 5);
insert into student
select 'bulise' name, age, sex, cid
from student
where name = 'tony';
--多條記錄同時插入
insert into student
select 'jack', 23, 1, 5 union
select 'tom', 24, 0, 3 union
select 'wendy', 25, 1, 3 union
select 'tony', 26, 0, 5;查詢、修改、刪除數據
--查詢數據 select * from classes; select * from student; select id, 'bulise' name, age, sex, cid from student where name = 'tony'; select *, (select max(age) from student) from student where name = 'tony'; --修改數據 update student set name = 'hoho', sex = 1 where id = 1; --刪除數據(from可省略) delete from student where id = 1;
備份數據、表
--備份、復制student表到stu select * into stu from student; select * into stu1 from (select * from stu) t; select * from stu; select * from stu1;--備份、復制student表到stu select * into stu from student; select * into stu1 from (select * from stu) t; select * from stu; select * from stu1;
利用存儲過程查詢表信息
--查詢student相關信息 exec sp_help student; exec sp_help classes;
總結
本篇文章就到這里了,希望能夠給你帶來幫助,也希望您能夠多多關注腳本之家的更多內容!
相關文章
Sql根據不同條件統計總數的方法(count和sum)
經常會遇到根據不同的條件統計總數的問題,一般有兩種寫法:count和sum都可以,下面通過實例代碼給大家分享Sql根據不同條件統計總數,感興趣的朋友一起看看吧2024-08-08
Sqlserver中char,nchar,varchar與Nvarchar的區別分析
Sqlserver中char,nchar,varchar與Nvarchar的區別分析,使用sqlserver的朋友可以參考下。2011-08-08
SQL?Server2012附加數據庫5120錯誤(拒絕訪問)的解決方法
在附加數據庫的時候會遇到錯誤代碼為5120等的錯誤,提示為拒絕訪問,下面這篇文章主要給大家介紹了關于SQL?Server2012附加數據庫5120錯誤(拒絕訪問)的解決方法,需要的朋友可以參考下2023-05-05
sqlserver下將數據庫記錄的列記錄轉換成行記錄的方法
sqlserver下將數據庫記錄的列記錄轉換成行記錄的方法分享,需要的朋友可以參考下。2011-07-07

