java開發分布式服務框架Dubbo調用過程
大致流程
客戶端根據遠程服務的地址,客戶端發送請求至服務端,服務端解析信息并找到對應的實現類,進行方法調用,之后將調用結果原路返回,客戶端解析響應之后再返回。

調用請求的具體信息
客戶端發送給服務端的請求中應該包含哪些具體信息呢?
首先肯定要說明調用的是服務端的哪個接口、方法名、方法參數類型、以及版本號等,將上述信息封裝進請求,服務端就可以根據請求進行方法調用,之后再組裝響應返回即可。

以上就是一個實際調用請求所包含的信息。
協議
遠程調用必不可少協議的約定,否則客戶端與服務端無法解析彼此傳來的信息,因此需要提前約定好協議,方便遠程調用的信息解析。
Dubbo使用的協議屬于Header+Body,協議頭固定長度,并且頭部中會填寫B(tài)ody的長度,因此Body是不固定長度的,方便拓展,伸縮性較好。
Dubbo協議

協議分為協議頭和協議體,16字節的協議頭主要攜帶了魔法數、一些請求的設置,消息體數據長度。
16字節之后包含的就是協議體,包含版本信息,接口名稱,接口版本,以及方法名參數類型等。

序列化器
網絡是以字節流傳輸?shù)?,傳輸之前,我們需要將?shù)據序列化為字節流然后再傳輸至服務端,服務端再反序列化這些字節流得到原來的數據。
從上圖中可得知,Dubbo支持多種序列化,大致分為兩種,一種是字符型,一種是二進制流。
字符型的代表就是JSON,優點是易懂,方便調試,缺點也很明顯,傳輸效率低,對于計算機來說有很多冗余的東西,例如JSON中的括號等等都會使得網絡傳輸時長邊長,占用帶寬變大。
二進制流類型的數據緊湊,占用字節數小,傳輸更快,但是調試?yán)щy。
Dubbo默認使用的是Hessian2Serialization,即Hessian2序列化協議。
調用流程圖

這個流程圖比較簡略,大致就是客戶端發起調用,實際調用的是代理類,代理類調用Client(默認使用NettyClient),之后構造好協議頭以及將Java對象序列化生成協議體,之后進行網絡傳輸。
服務端的NettyServer接收到請求之后,會分發給業務線程池,由線程池來調用具體的方法。
但這遠遠不夠,實際場景比這復雜得多,并且Dubbo是生產級別的,通常會比上述流程更加安全穩定。

在實際生產環境中,服務端往往會集群分布,多個服務端的服務會有多個Invoker,最終需要通過路由Router過濾,以及負載均衡LoadBalance選出一個Invoker進行調用。
請求會到達Netty的IO線程池進行序列化,再將請求發送給服務端,反序列化后丟入線程池處理,找到對應的Invoker進行調用。
調用流程源碼分析——客戶端
客戶端調用方法并發送請求。
首先會調用生成的代理類,而代理類會生成一個RpcInvocation對象調用MockClusterInvoker.invoke()。
生成的RpcInvocation如下:

進入MockClusterInvoker.invoke()看看:
public Result invoke(Invocation invocation) throws RpcException {
Result result = null;
//獲取mock參數配置
String value = this.directory.getUrl().getMethodParameter(invocation.getMethodName(), "mock", Boolean.FALSE.toString()).trim();
//如果配置了并且配置值為true
if (value.length() != 0 && !value.equalsIgnoreCase("false")) {
//強制走mock流程
if (value.startsWith("force")) {
result = this.doMockInvoke(invocation, (RpcException)null);
} else {
//不走mock流程
try {
result = this.invoker.invoke(invocation);
} catch (RpcException var5) {
....
}
....
result = this.doMockInvoke(invocation, var5);
}
}
} else {
result = this.invoker.invoke(invocation);
}
return result;
}
總的來說就是檢查配置是否配置了mock,如果沒有就直接進入this.invoker.invoke(invocation),實際上會調用到AbstractClusterInvoker.invoke():
public Result invoke(Invocation invocation) throws RpcException {
//檢查是否被銷毀
this.checkWhetherDestroyed();
LoadBalance loadbalance = null;
//從上下文中獲取attachments,如果獲取得到的話綁定到invocation中
Map<String, String> contextAttachments = RpcContext.getContext().getAttachments();
if (contextAttachments != null && contextAttachments.size() != 0) {
((RpcInvocation)invocation).addAttachments(contextAttachments);
}
//調用的是directory.list,其中會做路由過濾
List<Invoker<T>> invokers = this.list(invocation);
//如果過濾完之后還有Invoker,就通過SPI獲取對應的LoadBalance實現類
if (invokers != null && !invokers.isEmpty()) {
loadbalance = (LoadBalance)ExtensionLoader.getExtensionLoader(LoadBalance.class).getExtension(((Invoker)invokers.get(0)).getUrl().getMethodParameter(RpcUtils.getMethodName(invocation), "loadbalance", "random"));
}
RpcUtils.attachInvocationIdIfAsync(this.getUrl(), invocation);
return this.doInvoke(invocation, invokers, loadbalance); //調用子類方法
}
protected List<Invoker<T>> list(Invocation invocation) throws RpcException {
//獲取invokers目錄,實際調用的是AbstractDirectory.list()
List<Invoker<T>> invokers = this.directory.list(invocation);
return invokers;
}
模板方法模式
這是很常見的設計模式之一,就是再抽象類中定好代碼的整體架構,然后將具體的實現留到子類中,由子類自定義實現,由此可以再不改變整體執行步驟的情況下,實現多樣化的實現,減少代碼重復,利于擴展,符合開閉原則。
在上述代碼中this.doInvoke()是抽象方法,具體實現在FailoverClusterInvoker.doInvoke()中,上述所有步驟是每個子類都需要執行的,所以抽取出來放在抽象類中。
路由和負載均衡
上述this.directory.list(invocation),其實就是通過方法名找到對應的Invoker,然后由路由進行過濾。
public List<Invoker<T>> list(Invocation invocation) throws RpcException {
if (this.destroyed) {
throw new RpcException("Directory already destroyed .url: " + this.getUrl());
} else {
//抽象方法doList,同樣由子類實現
List<Invoker<T>> invokers = this.doList(invocation);
List<Router> localRouters = this.routers;
if (localRouters != null && !localRouters.isEmpty()) {
Iterator i$ = localRouters.iterator();
while(i$.hasNext()) {
Router router = (Router)i$.next();
try { //遍歷router,并判斷是否進行路由過濾
if (router.getUrl() == null || router.getUrl().getParameter("runtime", false)) {
invokers = router.route(invokers, this.getConsumerUrl(), invocation);
}
} catch (Throwable var7) {
logger.error("Failed to execute router: " + this.getUrl() + ", cause: " + var7.getMessage(), var7);
}
}
}
return invokers;
}
}
返回Invokers之后,還會在進行負載均衡的篩選,得到最終調用的Invoke,Dubbo默認使用的是FailoverClusterInvoker,即失敗調用后自動切換的容錯方式。
進入FailoverClusterInvoker.doInvoke():
public Result doInvoke(Invocation invocation, List<Invoker<T>> invokers, LoadBalance loadbalance) throws RpcException {
//重試次數
int len = this.getUrl().getMethodParameter(invocation.getMethodName(), "retries", 2) + 1;
if (len <= 0) {
len = 1;
}
....
//重試
for(int i = 0; i < len; ++i) {
//負載均衡篩選出一個Invoker
Invoker<T> invoker = this.select(loadbalance, invocation, copyinvokers, invoked);
invoked.add(invoker);
//在上下文中保存調用過的invoker
RpcContext.getContext().setInvokers(invoked);
try {
Result result = invoker.invoke(invocation);
....
return result;
} catch (RpcException e) {
....
} finally {
providers.add(invoker.getUrl().getAddress());
}
}
throw new RpcException();
}
發起這次調用的invoker.invoke又是調用抽象類的中的invoke,然后再調用子類的doInvoke,我們直接進入子類DubboInvoker.doInvoke看看:
protected Result doInvoke(Invocation invocation) throws Throwable {
RpcInvocation inv = (RpcInvocation)invocation;
String methodName = RpcUtils.getMethodName(invocation);
inv.setAttachment("path", this.getUrl().getPath()); //設置path到attachment中
inv.setAttachment("version", this.version); //設置版本號
ExchangeClient currentClient;
if (this.clients.length == 1) { //選擇client
currentClient = this.clients[0];
} else {
currentClient = this.clients[this.index.getAndIncrement() % this.clients.length];
}
try {
boolean isAsync = RpcUtils.isAsync(this.getUrl(), invocation); //是否異步調用
boolean isOneway = RpcUtils.isOneway(this.getUrl(), invocation); //是否oneway調用
int timeout = this.getUrl().getMethodParameter(methodName, "timeout", 1000); //獲取超時限制
if (isOneway) { //oneway
boolean isSent = this.getUrl().getMethodParameter(methodName, "sent", false);
currentClient.send(inv, isSent); //發送
RpcContext.getContext().setFuture((Future)null); //返回空的future
return new RpcResult(); //返回空結果
} else if (isAsync) { //異步調用
ResponseFuture future = currentClient.request(inv, timeout);
RpcContext.getContext().setFuture(new FutureAdapter(future)); //上下文中設置future
return new RpcResult(); //返回空結果
} else { //同步調用
RpcContext.getContext().setFuture((Future)null);
return (Result)currentClient.request(inv, timeout).get(); //直接調用future.get() 進行等待,完成get操作之后再返回結果
}
} catch (TimeoutException var9) {
throw new RpcException();
}
}
調用的三種方式
從上述代碼中,可以看到調用一共分為三種,分別是oneway,異步,同步。
- oneway:不需要關心請求是否發送成功的情況下,直接使用oneway,無需關心是否能完成發送并返回結果。
- 異步調用:client發送請求之后會得到一個ResponseFuture,然后將這個future塞入上下文中,讓用戶從上下文拿到這個future,用戶可以繼續執行操作在調用future.get()返回結果。
- 同步調用:從Dubbo源碼中,我們可以看到,先使用了future.get(),讓用戶進行等待之后,再用client發送請求,給用戶的感覺就是調用接口后要進行等待才能返回結果,這個過程是阻塞的。
currentClient.request()就是由如下所示,組裝request,然后構造一個future調用NettyClient發送請求。
public ResponseFuture request(Object request, int timeout) throws RemotingException {
if (this.closed) {
throw new RemotingException(this.getLocalAddress(), (InetSocketAddress)null, "Failed to send request " + request + ", cause: The channel " + this + " is closed!");
} else {
Request req = new Request(); //構建request
req.setVersion(Version.getProtocolVersion());
req.setTwoWay(true);
req.setData(request);
DefaultFuture future = new DefaultFuture(this.channel, req, timeout);
try {
this.channel.send(req); //調用NettyServer.sent()進行發送請求
return future;
} catch (RemotingException var6) {
future.cancel();
throw var6;
}
}
}
Dubbo默認的調用方式是異步調用,那么這個future保存至上下文之后,等響應回來之后怎么找到對應的future呢?
進入DefaultFuture看看:
public class Request {
private final long mId;
public Request() {
this.mId = newId();
}
//靜態變量遞增,依次構造唯一ID
private static long newId() {
return INVOKE_ID.getAndIncrement();
}
}
public class DefaultFuture implements ResponseFuture {
private static final Map<Long, DefaultFuture> FUTURES = new ConcurrentHashMap();
public DefaultFuture(Channel channel, Request request, int timeout) {
this.done = this.lock.newCondition();
this.start = System.currentTimeMillis();
this.channel = channel;
this.request = request;
this.id = request.getId(); //唯一ID
this.timeout = timeout > 0 ? timeout : channel.getUrl().getPositiveParameter("timeout", 1000);
FUTURES.put(this.id, this); //將唯一ID和future的關系保存到這個ConcurrentHashMap中
CHANNELS.put(this.id, channel);
}
}
Request構造對象的時候會生成一個唯一ID,future內部也會將自己與請求ID存儲到一個ConcurrentHashMap中,這個ID發送至服務端之后,服務端也會把這個ID返回,通過ID再去ConcurrentHashMap中找到對應的future,由此完成一次完整的調用。
最終相應返回之后會調用DefaultFuture.received():
public static void received(Channel channel, Response response) {
try {
//獲取響應的ID去FUTURES中獲取對應的future,獲取之后將future移除
DefaultFuture future = (DefaultFuture)FUTURES.remove(response.getId());
if (future != null) {
//確認接收響應
future.doReceived(response);
} else {
logger.warn("....");
}
} finally {
CHANNELS.remove(response.getId());
}
}
private void doReceived(Response res) {
this.lock.lock();
try {
this.response = res; //響應賦值
if (this.done != null) {
this.done.signal(); //通知響應返回
}
} finally {
this.lock.unlock();
}
if (this.callback != null) {
this.invokeCallback(this.callback);
}
}

調用流程源碼分析——服務端
服務端接受請求之后會解析請求得到消息,消息總共有五種派發策略:

Dubbo默認使用的是all,所有消息都派發到業務線程池中,在AllChannelHandler中實現:
public void received(Channel channel, Object message) throws RemotingException {
ExecutorService cexecutor = this.getExecutorService();
try {
cexecutor.execute(new ChannelEventRunnable(channel, this.handler, ChannelState.RECEIVED, message));
} catch (Throwable var8) {
if (message instanceof Request && var8 instanceof RejectedExecutionException) {
Request request = (Request)message;
if (request.isTwoWay()) { //如果需要返回響應,將錯誤封裝起來之后返回
String msg = "Server side(" + this.url.getIp() + "," + this.url.getPort() + ") threadpool is exhausted ,detail msg:" + var8.getMessage();
Response response = new Response(request.getId(), request.getVersion());
response.setStatus((byte)100);
response.setErrorMessage(msg);
channel.send(response);
return;
}
}
throw new ExecutionException(message, channel, this.getClass() + " error when process received event .", var8);
}
}
上述代碼就是將消息封裝成一個ChannelEventRunnable然后放入業務線程池中執行,ChannelEventRunnable會根據ChannelState參數調用對應的處理方法,此處是ChannelState.RECEIVED,因此調用的是handler.received,最終調用的是HeaderExchangeHandler.handleRequest()方法:
Response handleRequest(ExchangeChannel channel, Request req) throws RemotingException {
Response res = new Response(req.getId(), req.getVersion()); //通過requestId構造響應
Object data;
if (req.isBroken()) {
data = req.getData();
String msg;
if (data == null) {
msg = null;
} else if (data instanceof Throwable) {
msg = StringUtils.toString((Throwable)data);
} else {
msg = data.toString();
}
res.setErrorMessage("Fail to decode request due to: " + msg);
res.setStatus((byte)40);
return res;
} else {
data = req.getData();
try {
Object result = this.handler.reply(channel, data); //最終調用DubboProtocol.reply()
res.setStatus((byte)20);
res.setResult(result);
} catch (Throwable var6) {
res.setStatus((byte)70);
res.setErrorMessage(StringUtils.toString(var6));
}
return res;
}
}
進入DubboProtocol.reply()看看:
public Object reply(ExchangeChannel channel, Object message) throws RemotingException {
if (!(message instanceof Invocation)) {
throw new RemotingException();
} else {
Invocation inv = (Invocation)message;
Invoker<?> invoker = DubboProtocol.this.getInvoker(channel, inv); //根據inv得到對應的Invoker
if (Boolean.TRUE.toString().equals(inv.getAttachments().get("_isCallBackServiceInvoke"))) {
//一些回調邏輯
} else {
hasMethod = inv.getMethodName().equals(methodsStr);
}
}
RpcContext.getContext().setRemoteAddress(channel.getRemoteAddress());
return invoker.invoke(inv); //調用選擇的Invoker.invoke()
}
}
最后的調用我們已經了解過,就是調用一個Javassist生成的代理類,其中包含了真正的實現類;再進入this.getInvoker()看看是怎么根據請求信息獲取到Invoker的:
Invoker<?> getInvoker(Channel channel, Invocation inv) throws RemotingException {
//....
int port = channel.getLocalAddress().getPort();
String path = (String)inv.getAttachments().get("path");
//根據port、path以及其他信息獲取serviceKey
String serviceKey = serviceKey(port, path, (String)inv.getAttachments().get("version"), (String)inv.getAttachments().get("group"));
//根據serviceKey在之前提到的exportMap中獲取exporter
DubboExporter<?> exporter = (DubboExporter)this.exporterMap.get(serviceKey);
if (exporter == null) {
throw new RemotingException(....);
} else {
return exporter.getInvoker(); //返回Invoker
}
}
關鍵點在于serviceKey,在之前服務暴露提到的將Invoker封裝成exporter之后再構建一個exporterMap,將serviceKey和對應的exporter存入,在服務調用時這個map就起到作用了。
找到所需要的Invoker最終調用實現類具體方法再返回響應整個服務調用流程就結束了,再對上述的流程圖進行一下補充:

總結
首先客戶端調用接口中的某個方法,但實際調用的是代理類,代理類通過Cluster從獲取Invokers,之后通過Router進行路由過濾,再通過所配置的負載均衡機制進行篩選得到本次遠程調用所需要的Invoker,此時根據具體的協議構造請求頭,再將參數根據具體的序列化協議進行序列化之后構造好塞入?yún)f(xié)議體,最后通過NettyClient發起遠程調用。
服務端NettyServer收到請求后,根據協議將得到的信息進行反序列化得到對象,根據消息派發策略(默認是All)將消息丟入線程池。
業務現場會根據消息類型得到serviceKey,用這個key從之前服務暴露生成的exportMap中得到對應的Invoker,然后調用真正的實現類中的具體方法。
最終將結果返回,因?yàn)檎?qǐng)求和響應的都有一個對應且唯一的ID,客戶端會根據響應的ID找到存儲起來的Future,塞入響應中等待喚醒Future的線程,這就完成了一次完整的調用過程。
如有錯誤或不足歡迎評論指正。
以上就是java開發分布式服務框架Dubbo調用過程的詳細內容,更多關于Dubbo服務調用過程的資料請關注腳本之家其它相關文章!
相關文章
Java項目之java+springboot+ssm實現理財管理系統設計
這篇文章主要介紹了Java項目java+springboot+ssm實現理財管理系統設計,使用了當前較為流行的spring boot,spring,spring mvc,mybatis,shiro框架分頁處理使用了pagehelper進行操作,需要的朋友可以參考一下2022-03-03
PageHelper引發的幽靈數據問題解析
這篇文章主要為大家介紹了PageHelper引發的幽靈數據問題解析,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2023-04-04
java自帶的工具Jstack截取進程中的堆棧信息
本文給大家記錄的是java自帶的工具Jstack截取進程中的堆棧信息的方法,非常的實用,有需要的小伙伴可以參考下。2016-01-01
Java多線程之scheduledThreadPool的方法解析
這篇文章主要介紹了Java多線程之scheduledThreadPool的方法解析,queue是DelayedWorkQueue,但通過后面的分析可以知道,最大線程數是不起作用的,最多會起核心線程數的數量,需要的朋友可以參考下2023-12-12
利用Netty+SpringBoot實現定時后端向前端推送數據
這篇文章主要介紹了BIO、NIO、AIO三種Java?IO模型,并探討了如何使用Spring?Boot集成Netty實現后臺向前端推送信息的功能,文中通過代碼介紹的非常詳細,需要的朋友可以參考下2025-01-01
Spring Boot實現自動發送郵件
這篇文章主要為大家詳細介紹了Spring Boot實現自動發送郵件,文中示例代碼介紹的非常詳細,具有一定的參考價值,感興趣的小伙伴們可以參考一下2020-02-02

