C# DataGridView中實現勾選存儲數據和右鍵刪除數據(示例代碼)

更新時間：2021年07月06日 10:40:28 作者：caoguanghui0804

這篇文章主要介紹了C# DataGridView中實現勾選存儲數據和右鍵刪除數據的示例代碼，通過示例代碼給大家展示運行效果圖，需要的朋友可以參考下

DataGridView事件CellContentClick

觸發dataGridView的CellContentClick事件，并且在事件中調用Edit 方法。
實現DataGridView中添加CheckBox后不滿足條件去掉勾選
并且實現勾選后將綁定數據的存入表的動作

在這里插入圖片描述

點擊確定后去掉勾選

在這里插入圖片描述

Main.cs

 private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)
        {
            switch (this.tabControl1.SelectedIndex)
            {
                //case 0:
                //    //顯示數據
                //    ShowVlues();
                //    break;

                case 1:
                   
                    TableDefine.Initial_TableE();
                    for (int i = 0; i <= TableDefine.tGridField.Length - 1; i++)
                    {
                        cboSearch.Items.Add(TableDefine.tGridField[i].sCaption);
                        cboSearchList.Items.Add(TableDefine.tGridField[i].sFieldName);
                    }
                    if (cboSearch.Items.Count > 0)
                    {
                        cboSearch.SelectedIndex = 0;
                    }
                    //取機種
                    DataTable ModelDT = fslConn.GetAllModel();
                    if (ModelDT.Rows.Count > 0)
                    {
                        foreach (DataRow item in ModelDT.Rows)
                        {
                            cboModel.Items.Add(item[0]);
                        }
                    }

                    //取流程
                    DataTable RouteDT = fslConn.GetAllRoute();
                    if (RouteDT.Rows.Count > 0)
                    {
                        foreach (DataRow item in RouteDT.Rows)
                        {
                            cboRoute.Items.Add(item[0]);
                        }
                    }

                    //顯示數據
                    ShowEVlues();
                    break; 
            }
        }

        //取數據顯示
        void ShowEVlues()
        {
            string sFieldName = string.Empty;
            string sFieldText = string.Empty;
            if (cboSearch.SelectedIndex > -1 && txtSearch.Text.Trim() != "")
            {
                sFieldName = cboSearchList.Items[cboSearch.SelectedIndex].ToString();
                sFieldText = txtSearch.Text.Trim();
            }
            if (string.IsNullOrWhiteSpace(sFieldText))
                gvDataE.DataSource = fslConn.GetAllFslEName();
            else
                gvDataE.DataSource = fslConn.GetAllFslEName(sFieldName, sFieldText);
            //欄位title
            for (int i = 0; i <= gvDataE.Columns.Count - 1; i++)
            {
                gvDataE.Columns[i].Visible = false;
            }
            for (int i = 0; i < TableDefine.tGridField.Length; i++)
            {
                string sGridField = TableDefine.tGridField[i].sFieldName;

                if (gvDataE.Columns.Contains(sGridField))
                {
                    gvDataE.Columns[sGridField].HeaderText = TableDefine.tGridField[i].sCaption;
                    gvDataE.Columns[sGridField].DisplayIndex = i; //欄位顯示順序
                    gvDataE.Columns[sGridField].Visible = true;
                }
            }
            gvDataE.Focus();
            //為dgv增加復選框列
            DataGridViewCheckBoxColumn checkbox = new DataGridViewCheckBoxColumn();
            //列顯示名稱
            checkbox.HeaderText = "選擇";
            checkbox.Name = "IsChecked";
            checkbox.TrueValue = true;
            checkbox.FalseValue = false;
            checkbox.DataPropertyName = "IsChecked";
            //列寬
            checkbox.Width = 50;
            //列大小不改變
            checkbox.Resizable = DataGridViewTriState.False;
            //添加的checkbox在dgv第一列
            this.gvDataE.Columns.Insert(0, checkbox);   
        }
        
  //實現搜索
        private void txtSearch_KeyPress(object sender, KeyPressEventArgs e)
        {
            if (e.KeyChar != (char)Keys.Return)
                return;
            ShowEVlues();
            editFilter.Focus();
        }
   //實現通過流程取站點
        private void cboRoute_SelectedIndexChanged(object sender, EventArgs e)
        {
            if (cboRoute.Text != "")
            {
                //取站點
                DataTable StationTypeDT = fslConn.GetAllStationType(cboRoute.Text);
                if (StationTypeDT.Rows.Count > 0)
                {
                    for (int i = 0; i < StationTypeDT.Rows.Count; i++)
                    {
                        //cboStationType.Items.Add(item[0]);
                        cboStationType.Items.Add(new Metadata(StationTypeDT.Rows[i][2].ToString(), StationTypeDT.Rows[i][0].ToString(), StationTypeDT.Rows[i][1].ToString()));
                    }
                }
            }
        }
        //點擊勾選事件后進行數據綁定
        private void gvDataE_CellContentClick(object sender, DataGridViewCellEventArgs e)
        {
            string Model = cboModel.Text;
            string Route = cboRoute.Text;
            if (Model == "" || Route == ""|| cboStationType.Text == "")
            {
                MessageBox.Show("機種、流程、站點不能為空，請檢查!");
                //DataGridViewCheckBoxCell checkCell = (DataGridViewCheckBoxCell)this.gvDataE.Rows[e.RowIndex].Cells["IsChecked"];
                // this.gvDataE.Rows[e.RowIndex].Cells["IsChecked"].Value = false;
                //將勾選去掉
                this.gvDataE.RefreshEdit();
                return;
            }

            //站點代碼
            string StationType = ((Metadata)cboStationType.SelectedItem).ID;
            //站點描述
            string StationTypeDesc = ((Metadata)cboStationType.SelectedItem).NAMEDESC;

         
            if (e.ColumnIndex == 0 && e.RowIndex != -1)
            {
                //獲取控件的值
                DataGridViewCheckBoxCell checkCell = (DataGridViewCheckBoxCell)this.gvDataE.Rows[e.RowIndex].Cells["IsChecked"];
                Boolean flag = Convert.ToBoolean(checkCell.Value);
                //KP品名
                string gvFunName = gvDataE.Rows[e.RowIndex].Cells["MAT_TYPE_CODE"].Value.ToString();
                //KP品名描述
                string gvFunNameDesc = gvDataE.Rows[e.RowIndex].Cells["MAT_TYPE_DESC"].Value.ToString();

        
                if  (flag == false)
                {
                    checkCell.Value = true;
                    //添加權限
                    fslConn.SaveFslPower(gvFunName, gvFunNameDesc, Model,StationType, StationTypeDesc);
                }
            }
        }

ComboBox取值

main.cs
 //取機種
                    DataTable ModelDT = fslConn.GetAllModel();
                    if (ModelDT.Rows.Count > 0)
                    {
                        foreach (DataRow item in ModelDT.Rows)
                        {
                            cboModel.Items.Add(item[0]);
                        }
                    }
 fslConn.cs                   
 //取機種
        public DataTable GetAllModel()
        {
            return fslDAL.GetAllModel();
        }
fslDAL.cs
 //取機種
        public DataTable GetAllModel()
        {
            string sql = "SELECT MODEL FROM IMES.M_MODEL";
            return utility.Query(sql);
        }

儲存數據

 fslConn.cs  
    public long SaveFslPower(string gvFunName, string gvFunNameDesc, string Model, string StationType, string StationTypeDesc )
        {    
            return fslDAL.SaveFslPower(gvFunName, gvFunNameDesc, Model, StationType, StationTypeDesc);
        }
fslDAL.cs
     //存權限
        public long SaveFslPower(string gvFunName, string gvFunNameDesc, string Model, string StationType, string StationTypeDesc)
        {
            string id = GetMaxId();
            string sql = @"INSERT INTO IMES.M_STATIONTYPE_PARTSPEC  (ID,MODEL,STATION_TYPE,STATION_DESC,KP_SPEC,KP_SPEC_DESC,QTY,ENABLED,CREATE_EMPNO,CREATE_TIME,UPDATE_EMPNO)
                        VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)";
            object[] para = new object[] { id, Model, StationType , StationTypeDesc,gvFunName, gvFunNameDesc, "1", "Y", utility.GlobalUserNo,DateTime.Now, utility.GlobalUserNo };
            return utility.ExecuteSql(sql, para);
        }

右鍵刪除數據

實現效果

在這里插入圖片描述

Main.cs
   //實現DataGridView欄位右鍵刪除數據
        private void 刪除ToolStripMenuItem_Click(object sender, EventArgs e)
        {
            if (gvData.Rows.Count == 0 || gvData.CurrentRow == null)
            {
                return;
            }
            string ID = gvData.CurrentRow.Cells["ID"].Value.ToString();
            if (MessageBox.Show("ID:" + ID + " 確認刪除嗎?", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.Yes)
            {
                //M_STATIONTYPE_PARTSPEC_HT寫入歷史庫
                fslConn.SaveFslHistoryData(ID);
                移除權限
                fslConn.DeleteFslByIDAndFunc(ID);

                //顯示數據
                ShowVlues();
            }              
        }
fslConn.cs 
    //刪除權限
        public long DeleteFslByIDAndFunc(string id)
        {
            return fslDAL.DeleteFslByIDAndFunc( id);
        }   
fslDAL.cs
     //刪除權限
        public long DeleteFslByIDAndFunc(string id)
        {
            string sql = @"Delete from  IMES.M_STATIONTYPE_PARTSPEC WHERE ID =:1";
            object[] para = new object[] { id };
            return utility.ExecuteSql(sql, para);
        }

到此這篇關于C# DataGridView中實現勾選存儲數據和右鍵刪除數據的文章就介紹到這了,更多相關C# DataGridView右鍵刪除數據內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: