redis 使用lettuce 啟動內存泄漏錯誤的解決方案
redis 使用 lettuce 出現
LEAK: hashedwheelTimer.release() was not called before it's garbage-collected. Enable advanced leak
內存泄漏。其實是內存不夠大導致。
找到eclispe 中window->preferences->Java->Installed JRE ,點擊右側的Edit 按鈕,在編輯界面中的 “Default VM Arguments ”選項中,填入如下值即可。
-Xms64m -Xmx128m
內存調的足夠大可解決。
另一種方法無法解決。不知道是不是方法設置不對的問題
1、打開eclipse配置文件eclipse.ini,更改把-Xmx(其數值代表jvm可以使用的最大內存數)
2. 運行java程序時,選擇run->run configuration->arguments,輸入-Xms100M -Xmx800M(-Xms代表jvm啟動時分配的內存大小,-Xmx代表可最大分配多少內存)。
補充:Redis連接池Lettuce踩坑記錄
一、引言
近期項目頻繁部署不同測試環境,在搭建運行環境與部署項目過程中踩到了不少Redis的坑。項目是基于SpringBoot2.1.12,SpringBoot2.1.X集成jar包Spring-data-redis-start 使用Lettuce作為Redis連接池。
SpringBoot1.x默認采用Jedis作為redis客戶端連接池。
SpringBoot2.x,spring-data-redis 默認采用Lettuce作為redis客戶端驅動連接池。
二、踩坑場景
運行環境Redis集群中某個master節點不穩定連接不上,導致SpringBoot應用連接Redis報錯,報錯連接timeout。
三、解決方案
基于Spring-data-redis重寫RedisConnectionFactory Bean。需要設置“取消校驗集群節點的成員關系”:.validateClusterNodeMembership(false)。
1、redis配置
spring:
redis:
cluster:
nodes:
- ${redis.host.cluster} #redis集群ip-port
password: ${redis.password}
timeout: 5000 #連接超時時間
lettuce:
pool:
max-active: 10 #連接池最大連接數
max-wait: -1 #連接池最大阻塞時間
max-idle: 5 #連接池中最大空閑連接
min-idle: 1 #連接池中最小空閑連接
redis:
cluster:
enabled: true
2、Config配置類
@Data
@Component
@ConditionalOnProperty(name = "redis.cluster.enabled", havingValue = "true", matchIfMissing = false)
public class RedisConfig {
@Autowired
RedisProperties redisProperties;
// 在構建LettuceConnectionFactory時,如果不使用內置的destroyMethod,可能會導致Redis連接早于其它Bean被銷毀
@Bean(destroyMethod = "destroy")
public RedisConnectionFactory newLettuceConnectionFactory() {
// 配置用于開啟自適應刷新和定時刷新。如自適應刷新不開啟,Redis集群變更時將會導致連接異常
ClusterTopologyRefreshOptions clusterTopologyRefreshOptions = ClusterTopologyRefreshOptions.builder()
.enablePeriodicRefresh(Duration.ofSeconds(60))// 開啟周期刷新(默認60秒)
.enableAdaptiveRefreshTriggers(RefreshTrigger.ASK_REDIRECT,RefreshTrigger.UNKNOWN_NODE)// 開啟自適應刷新
.build();
ClusterClientOptions clusterClientOptions = ClusterClientOptions.builder()
.topologyRefreshOptions(clusterTopologyRefreshOptions)//拓?fù)渌⑿?
.disconnectedBehavior(ClientOptions.DisconnectedBehavior.REJECT_COMMANDS)
.autoReconnect(true)
.socketOptions(SocketOptions.builder().keepAlive(true).build())
.validateClusterNodeMembership(false)// 取消校驗集群節點的成員關系
.build();
LettuceClientConfiguration clientConfig = LettuceClientConfiguration.builder()
.clientOptions(clusterClientOptions)
.readFrom(ReadFrom.SLAVE_PREFERRED)
.build();
return new LettuceConnectionFactory(getClusterConfiguration(), clientConfig);
}
private RedisClusterConfiguration getClusterConfiguration() {
RedisProperties.Cluster clusterProperties = redisProperties.getCluster();
RedisClusterConfiguration config = new RedisClusterConfiguration(clusterProperties.getNodes());
if (clusterProperties.getMaxRedirects() != null) {
config.setMaxRedirects(clusterProperties.getMaxRedirects());
}
if (redisProperties.getPassword() != null) {
config.setPassword(RedisPassword.of(redisProperties.getPassword()));
}
return config;
}
}
注意:
RedisClusterConfiguration getClusterConfiguration()需要設置Password,不然SpringBoot啟動報認證錯誤:
“io.lettuce.core.RedisCommandExecutionException: NOAUTH Authentication required”
如下:
另外,lettuce-core jar包版本不能過低,避免部分配置項無法支持,以上配置為lettuce-core-5.18.RELEASE.jar。
以上為個人經驗,希望能給大家一個參考,也希望大家多多支持腳本之家。如有錯誤或未考慮完全的地方,望不吝賜教。
相關文章
解決Spring導出可以運行的jar包問題
最近需要解決Maven項目導入可執行的jar包的問題,如果項目不包含Spring,那么使用mvn assembly:assembly即可,這篇文章主要介紹了Spring導出可以運行的jar包,需要的朋友可以參考下2023-03-03
Spring ApplicationListener的使用詳解
這篇文章主要介紹了Spring ApplicationListener的使用,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2020-06-06
IDEA 單元測試報錯:Class not found:xxxx springb
這篇文章主要介紹了IDEA 單元測試報錯:Class not found:xxxx springboot的解決方案,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2022-01-01
SpringBoot詳解如何進行整合Druid數據源
Druid是阿里開發的一款開源的數據源,被很多人認為是Java語言中最好的數據庫連接池,本文主要介紹了SpringBoot整合Druid數據源的方法實現,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2022-06-06
Java實現的漢語拼音工具類完整實例
這篇文章主要介紹了Java實現的漢語拼音工具類,結合完整實例形式分析了java基于pinyin4j包實現編碼轉換的相關操作技巧,需要的朋友可以參考下2017-11-11

