Spring Security 自定義短信登錄認證的實現

更新時間：2021年03月07日 09:39:40 作者：靚仔凌霄

這篇文章主要介紹了Spring Security 自定義短信登錄認證的實現，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧

自定義登錄filter

上篇文章我們說到，對于用戶的登錄，security通過定義一個filter攔截login路徑來實現的，所以我們要實現自定義登錄，需要自己定義一個filter，繼承AbstractAuthenticationProcessingFilter，從request中提取到手機號和驗證碼，然后提交給AuthenticationManager：

public class SmsAuthenticationFilter extends AbstractAuthenticationProcessingFilter {
 public static final String SPRING_SECURITY_FORM_PHONE_KEY = "phone";
 public static final String SPRING_SECURITY_FORM_VERIFY_CODE_KEY = "verifyCode";
 private static final AntPathRequestMatcher DEFAULT_ANT_PATH_REQUEST_MATCHER = new AntPathRequestMatcher("/smsLogin",
   "POST");
 protected SmsAuthenticationFilter() {
  super(DEFAULT_ANT_PATH_REQUEST_MATCHER);
 }

 @Override
 public Authentication attemptAuthentication(HttpServletRequest request, HttpServletResponse response) throws AuthenticationException, IOException, ServletException {
  String phone = request.getParameter(SPRING_SECURITY_FORM_PHONE_KEY);
  String verifyCode = request.getParameter(SPRING_SECURITY_FORM_VERIFY_CODE_KEY);
  if (StringUtils.isBlank(phone)){
   phone = "";
  }
  if (StringUtils.isBlank(verifyCode)){
   verifyCode = "";
  }
  SmsAuthenticationToken authenticationToken = new SmsAuthenticationToken(phone, verifyCode);
  setDetails(request,authenticationToken);
  return getAuthenticationManager().authenticate(authenticationToken);
 }

 protected void setDetails(HttpServletRequest request, SmsAuthenticationToken authRequest) {
  authRequest.setDetails(authenticationDetailsSource.buildDetails(request));
 }
}

其中SmsAuthenticationToken參照UsernamePasswordAuthenticationToken來實現：

public class SmsAuthenticationToken extends AbstractAuthenticationToken {
 private final Object principal;
 private Object credentials;

 public SmsAuthenticationToken(Object principal, Object credentials) {
  super(null);
  this.principal = principal;
  this.credentials = credentials;
  //初始化完成，但是還未認證
  setAuthenticated(false);
 }

 public SmsAuthenticationToken(Collection<? extends GrantedAuthority> authorities, Object principal, Object credentials) {
  super(authorities);
  this.principal = principal;
  this.credentials = credentials;
  setAuthenticated(true);
 }

 @Override
 public Object getCredentials() {
  return credentials;
 }

 @Override
 public Object getPrincipal() {
  return principal;
 }
}

自定義provider實現身份認證

我們知道AuthenticationManager最終會委托給Provider來實現身份驗證，所以我們要判斷驗證碼是否正確，需要自定義Provider：

@Slf4j
@Component
public class SmsAuthenticationProvider implements AuthenticationProvider {
 @Autowired
 private UserDetailsService userDetailsService;

 @Override
 public Authentication authenticate(Authentication authentication) {
  Assert.isInstanceOf(SmsAuthenticationToken.class, authentication,
    () -> "SmsAuthenticationProvider.onlySupports Only SmsAuthenticationToken is supported");
  SmsAuthenticationToken authenticationToken = (SmsAuthenticationToken) authentication;
  String phone = (String) authenticationToken.getPrincipal();
  String verifyCode = (String) authenticationToken.getCredentials();
  UserDetails userDetails = userDetailsService.loadUserByUsername(phone);
  if (userDetails == null){
   throw new InternalAuthenticationServiceException("cannot get user info");
  }
  //驗證碼是否正確
  if (!StringUtils.equals(CacheUtil.getValue(phone),verifyCode)){
   throw new AuthenticationCredentialsNotFoundException("驗證碼錯誤");
  }
  return new SmsAuthenticationToken(userDetails.getAuthorities(),userDetails,verifyCode);
 }

 @Override
 public boolean supports(Class<?> authentication) {
  return authentication.isAssignableFrom(SmsAuthenticationToken.class);
 }
}

上面的CacheUtil是封裝的guava cache的實現，模擬發送驗證碼存儲到內存中，在這個地方取出來做對比，如果對比失敗就拋異常，對比成功就返回一個新的token，這個token中是包含了用戶具有的權限的。

@Slf4j
public class CacheUtil {
 private static final LoadingCache<String, String> CACHE = CacheBuilder.newBuilder()
   //基于容量回收：總數量100個
   .maximumSize(100)
   //定時回收：沒有寫訪問1分鐘后失效清理
   .expireAfterWrite(1, TimeUnit.MINUTES)
   //當在緩存中未找到所需的緩存項時，會執行CacheLoader的load方法加載緩存
   .build(new CacheLoader<String, String>() {
    @Override
    public String load(String key) throws Exception {
     log.debug("沒有找到緩存: {}",key);
     return "";
    }
   });
 public static void putValue(String key, String value){
  CACHE.put(key,value);
 }

 public static String getValue(String key){
  try {
   return CACHE.get(key);
  } catch (ExecutionException e) {
   e.printStackTrace();
  }
  return "";
 }
}

身份認證結果回調

filter將手機號和驗證碼交給provider做驗證，經過provider的校驗，結果無非就兩種，一種驗證成功，一種驗證失敗，對于這兩種不同的結果，我們需要實現兩個handler，在獲取到結果之后做回調。因為我們這兒只是簡單的做url跳轉，所以只需要繼承SimpleUrlAuthenticationSuccessHandler：

對于success的：

@Component
public class SmsAuthSuccessHandler extends SimpleUrlAuthenticationSuccessHandler {
 public SmsAuthSuccessHandler() {
  super("/index");
 }
}

對于failure的：

@Component
public class SmsAuthFailureHandler extends SimpleUrlAuthenticationFailureHandler {
 public SmsAuthFailureHandler() {
  super("/failure");
 }
}

上面整個登錄流程的組件就完成了，接下來需要將它們整合起來。

整合登錄組件

具體怎么整合，我們可以參考表單登錄中，UsernamePasswordAuthenticationFilter是怎么整合進去的，回到配置類，還記得我們是怎么配置Security的嗎：

@Configuration
public class SecurityConfig extends WebSecurityConfigurerAdapter {
 @Override
 protected void configure(HttpSecurity http) throws Exception {
  http.formLogin()
    .loginPage("/login") //登錄頁面
    .successForwardUrl("/index") //登錄成功后的頁面
    .failureForwardUrl("/failure") //登錄失敗后的頁面
    .and()
    // 設置URL的授權
    .authorizeRequests()
    // 這里需要將登錄頁面放行
    .antMatchers("/login")
    .permitAll()
    //除了上面，其他所有請求必須被認證
    .anyRequest()
    .authenticated()
    .and()
    // 關閉csrf
    .csrf().disable();
 }
}

分析表單登錄實現

看第一句，調用了http.formLogin()，在HttpSecurity的formLogin方法定義如下：

public FormLoginConfigurer<HttpSecurity> formLogin() throws Exception {
 return getOrApply(new FormLoginConfigurer<>());
}
private <C extends SecurityConfigurerAdapter<DefaultSecurityFilterChain, HttpSecurity>> C getOrApply(C configurer)
 throws Exception {
  //注意這個configure為SecurityConfigurerAdapter
 C existingConfig = (C) getConfigurer(configurer.getClass());
 if (existingConfig != null) {
 return existingConfig;
 }
 return apply(configurer);
}

apply方法為AbstractConfiguredSecurityBuilder中的方法，我們目前先不關注它的實現，后面會仔細展開講?，F(xiàn)在只需要知道通過這個方法就能將configurer加入到security配置中。

這個地方添加了一個FormLoginConfigurer類，對于這個類官方給的解釋為：

Adds form based authentication. All attributes have reasonable defaults making all parameters are optional. If no {@link #loginPage(String)} is specified, a default login page will be generated by the framework.

翻譯過來就是：

添加基于表單的身份驗證。所有屬性都有合理的默認值，從而使所有參數都是可選的。如果未指定loginPage，則框架將生成一個默認的登錄頁面。

看一下它的構造方法：

public FormLoginConfigurer() {
 super(new UsernamePasswordAuthenticationFilter(), null);
 usernameParameter("username");
 passwordParameter("password");
}

發現UsernamePasswordAuthenticationFilter被傳遞給了父類，我們?nèi)ニ母割怉bstractAuthenticationFilterConfigurer看一下：

public abstract class AbstractAuthenticationFilterConfigurer<B extends HttpSecurityBuilder<B>, T extends AbstractAuthenticationFilterConfigurer<B, T, F>, F extends AbstractAuthenticationProcessingFilter>
 extends AbstractHttpConfigurer<T, B> {
 
 protected AbstractAuthenticationFilterConfigurer(F authenticationFilter, String defaultLoginProcessingUrl) {
 this();
  //這個filter就是UsernamePasswordAuthenticationFilter
 this.authFilter = authenticationFilter;
 if (defaultLoginProcessingUrl != null) {
 loginProcessingUrl(defaultLoginProcessingUrl);
 }
 }
 
 @Override
 public void configure(B http) throws Exception {
 PortMapper portMapper = http.getSharedObject(PortMapper.class);
 if (portMapper != null) {
 this.authenticationEntryPoint.setPortMapper(portMapper);
 }
 RequestCache requestCache = http.getSharedObject(RequestCache.class);
 if (requestCache != null) {
 this.defaultSuccessHandler.setRequestCache(requestCache);
 }
  //通過getSharedObject獲取共享對象。這里獲取到AuthenticationManager
 this.authFilter.setAuthenticationManager(http.getSharedObject(AuthenticationManager.class));
  //設置成功和失敗的回調
 this.authFilter.setAuthenticationSuccessHandler(this.successHandler);
 this.authFilter.setAuthenticationFailureHandler(this.failureHandler);
 if (this.authenticationDetailsSource != null) {
 this.authFilter.setAuthenticationDetailsSource(this.authenticationDetailsSource);
 }
 SessionAuthenticationStrategy sessionAuthenticationStrategy = http
 .getSharedObject(SessionAuthenticationStrategy.class);
 if (sessionAuthenticationStrategy != null) {
 this.authFilter.setSessionAuthenticationStrategy(sessionAuthenticationStrategy);
 }
 RememberMeServices rememberMeServices = http.getSharedObject(RememberMeServices.class);
 if (rememberMeServices != null) {
 this.authFilter.setRememberMeServices(rememberMeServices);
 }
 F filter = postProcess(this.authFilter);
  //添加filter
 http.addFilter(filter);
 }
}

可以看到這個地方主要做了三件事：

將AuthenticationManager設置到filter中
添加成功/失敗的回調
將過濾器添加到過濾器鏈中

仿照表單登錄，實現配置類

仿照上面的三個步驟，我們可以自己實現一個配置類，查看AbstractAuthenticationFilterConfigurer的類繼承關系：

它最上面的頂級父類為SecurityConfigurerAdapter，我們就繼承它來實現我們基本的配置就行了（也可以繼承AbstractHttpConfigurer，沒有歧視的意思），并且實現上面的三步：

@Component
public class SmsAuthenticationSecurityConfig extends SecurityConfigurerAdapter<DefaultSecurityFilterChain, HttpSecurity> {
 @Autowired
 private SmsAuthSuccessHandler smsAuthSuccessHandler;
 @Autowired
 private SmsAuthFailureHandler smsAuthFailureHandler;
 @Autowired
 private SmsAuthenticationProvider smsAuthenticationProvider;
 @Override
 public void configure(HttpSecurity builder) throws Exception {
  SmsAuthenticationFilter smsAuthenticationFilter = new SmsAuthenticationFilter();
  smsAuthenticationFilter.setAuthenticationManager(builder.getSharedObject(AuthenticationManager.class));
  smsAuthenticationFilter.setAuthenticationSuccessHandler(smsAuthSuccessHandler);
  smsAuthenticationFilter.setAuthenticationFailureHandler(smsAuthFailureHandler);

  builder.authenticationProvider(smsAuthenticationProvider);
  builder.addFilterAfter(smsAuthenticationFilter, UsernamePasswordAuthenticationFilter.class);
 }
}

和上面有一點不同，我們自定義的filter需要指定一下順序，通過addFilterAfter方法將我們的filter添加到過濾器鏈中，并且將自定義的provider也一并配置了進來。

添加配置到security中

這樣我們的所有組件就已經組合到一起了，修改一下配置類：

@Autowired
private SmsAuthenticationSecurityConfig smsAuthenticationSecurityConfig;
@Override
protected void configure(HttpSecurity http) throws Exception {
 http.formLogin()
  .loginPage("/login")
  .and()
  .apply(smsAuthenticationSecurityConfig)
  .and()
  // 設置URL的授權
  .authorizeRequests()
  // 這里需要將登錄頁面放行
  .antMatchers("/login","/verifyCode","/smsLogin","/failure")
  .permitAll()
  // anyRequest() 所有請求 authenticated() 必須被認證
  .anyRequest()
  .authenticated()
  .and()
  // 關閉csrf
  .csrf().disable();
}

再修改一下登錄頁面的登錄接口和字段名：

<!DOCTYPE html>
<html lang="zh">
<head>
 <meta charset="UTF-8">
 <title>login</title>
</head>
<body>
 <form action="/smsLogin" method="post">
  <input type="text" name="phone"/>
  <input type="password" name="verifyCode"/>
  <input type="submit" value="提交"/>
 </form>
</body>
</html>

這樣通過短信驗證碼登錄的功能就已經實現了。

建議大家可以自己重新實現一個自定義郵箱驗證碼登錄，加深映像。

源碼分析

configurer配置類工作原理

上面只是簡單的使用，接下來我們分析configure是如何工作的。

大家注意自己要打開idea跟著過一遍源碼

其實通過上面的配置我們可以發現，在security中的過濾器其實都是通過各種xxxConfigure來進行配置的，我們可以簡單的理解為filter就是和配置類綁定在一起的。明白了這個概念，我們繼續往下分析。
看上面AbstractAuthenticationFilterConfigurer的類繼承關系圖，從最上面開始分析，SecurityBuilder和SecurityConfigurer都是接口：

public interface SecurityBuilder<O> {
 /**
 * 構建一個對象并返回
 */
 O build() throws Exception;
}
public interface SecurityConfigurer<O, B extends SecurityBuilder<O>> {
 /**
 * 初始化
 */
 void init(B builder) throws Exception;
 void configure(B builder) throws Exception;

}

SecurityConfigurerAdapter分析

上面兩個接口的具體實現交給了SecurityConfigurerAdapter，在spring security中很多配置類都是繼承自SecurityConfigurerAdapter來實現的?？匆幌聦崿F(xiàn)類SecurityConfigurerAdapter的源碼：

public abstract class SecurityConfigurerAdapter<O, B extends SecurityBuilder<O>> implements SecurityConfigurer<O, B> {

 private B securityBuilder;

 private CompositeObjectPostProcessor objectPostProcessor = new CompositeObjectPostProcessor();

 @Override
 public void init(B builder) throws Exception {
 }

 @Override
 public void configure(B builder) throws Exception {
 }

 /**
 * 返回SecurityBuilder，這樣就可以進行鏈式調用了
 */
 public B and() {
 return getBuilder();
 }

 /**
 * 獲取到SecurityBuilder
 */
 protected final B getBuilder() {
 Assert.state(this.securityBuilder != null, "securityBuilder cannot be null");
 return this.securityBuilder;
 }

 /**
 * 執行對象的后置處理。默認值為委派給ObjectPostProcessor完成
 * @return 可使用的已修改對象
 */
 @SuppressWarnings("unchecked")
 protected <T> T postProcess(T object) {
 return (T) this.objectPostProcessor.postProcess(object);
 }

 public void addObjectPostProcessor(ObjectPostProcessor<?> objectPostProcessor) {
 this.objectPostProcessor.addObjectPostProcessor(objectPostProcessor);
 }

 public void setBuilder(B builder) {
 this.securityBuilder = builder;
 }

 /**
 * ObjectPostProcessor的一個實現
 */
 private static final class CompositeObjectPostProcessor implements ObjectPostProcessor<Object> {
 private List<ObjectPostProcessor<?>> postProcessors = new ArrayList<>();
 @Override
 @SuppressWarnings({ "rawtypes", "unchecked" })
 public Object postProcess(Object object) {
  //執行后置處理器的postProcess方法
 for (ObjectPostProcessor opp : this.postProcessors) {
 Class<?> oppClass = opp.getClass();
 Class<?> oppType = GenericTypeResolver.resolveTypeArgument(oppClass, ObjectPostProcessor.class);
 if (oppType == null || oppType.isAssignableFrom(object.getClass())) {
  object = opp.postProcess(object);
 }
 }
 return object;
 }
  //在list中添加了一個后置處理器
 private boolean addObjectPostProcessor(ObjectPostProcessor<?> objectPostProcessor) {
 boolean result = this.postProcessors.add(objectPostProcessor);
 this.postProcessors.sort(AnnotationAwareOrderComparator.INSTANCE);
 return result;
 }

 }
}

嗯。。。這兩個方法都是空實現，應該是交給后面的子類去自己重寫方法。多出來的內容就只是初始化了CompositeObjectPostProcessor，并基于它封裝了兩個方法。

CompositeObjectPostProcessor是ObjectPostProcessor的一個實現，ObjectPostProcessor實際上是一個后置處理器。
其次addObjectPostProcessor方法實際上就是在list中添加了一個后置處理器并排序。然后在postProcess方法中對這個list遍歷，判斷ObjectPostProcessor泛型類型和傳過來的參數類型是否為父子關系，再次調用postProcess方法。

這個地方可能有點疑惑，為什么要再調用一次postProcess，這不就成遞歸了嗎，我們注意一下CompositeObjectPostProcessor類是private的，也就是只能在SecurityConfigurerAdapter內部使用，這里再次調用postProcess方法應該是其他的ObjectPostProcessor的實現。

可以看一下ObjectPostProcessor總共有兩個實現，另外還有一個是AutowireBeanFactoryObjectPostProcessor：

final class AutowireBeanFactoryObjectPostProcessor
 implements ObjectPostProcessor<Object>, DisposableBean, SmartInitializingSingleton {

 private final Log logger = LogFactory.getLog(getClass());

 private final AutowireCapableBeanFactory autowireBeanFactory;

 private final List<DisposableBean> disposableBeans = new ArrayList<>();

 private final List<SmartInitializingSingleton> smartSingletons = new ArrayList<>();

 AutowireBeanFactoryObjectPostProcessor(AutowireCapableBeanFactory autowireBeanFactory) {
 Assert.notNull(autowireBeanFactory, "autowireBeanFactory cannot be null");
 this.autowireBeanFactory = autowireBeanFactory;
 }

 @Override
 @SuppressWarnings("unchecked")
 public <T> T postProcess(T object) {
 if (object == null) {
 return null;
 }
 T result = null;
 try {
 result = (T) this.autowireBeanFactory.initializeBean(object, object.toString());
 }
 catch (RuntimeException ex) {
 Class<?> type = object.getClass();
 throw new RuntimeException("Could not postProcess " + object + " of type " + type, ex);
 }
 this.autowireBeanFactory.autowireBean(object);
 if (result instanceof DisposableBean) {
 this.disposableBeans.add((DisposableBean) result);
 }
 if (result instanceof SmartInitializingSingleton) {
 this.smartSingletons.add((SmartInitializingSingleton) result);
 }
 return result;
 }

 @Override
 public void afterSingletonsInstantiated() {
 for (SmartInitializingSingleton singleton : this.smartSingletons) {
 singleton.afterSingletonsInstantiated();
 }
 }

 @Override
 public void destroy() {
 for (DisposableBean disposable : this.disposableBeans) {
 try {
 disposable.destroy();
 }
 catch (Exception ex) {
 this.logger.error(ex);
 }
 }
 }
}

這里面主要是通過autowireBeanFactory將對象注入到容器當中，在security中，很多對象都是new出來的，這些new出來的對象和容器沒有任何關聯，也不方便管理，所以通過AutowireBeanFactoryObjectPostProcessor來完成對象的注入。

也就是說，在SecurityConfigurerAdapter中定義的這兩個方法，其實就是將對象放進spring容器當中，方便管理。

AbstractConfiguredSecurityBuilder分析

SecurityConfigurerAdapter的內容就這么多了，繼續往下看AbstractHttpConfigurer：

public abstract class AbstractHttpConfigurer<T extends AbstractHttpConfigurer<T, B>, B extends HttpSecurityBuilder<B>>
 extends SecurityConfigurerAdapter<DefaultSecurityFilterChain, B> {
 @SuppressWarnings("unchecked")
 public B disable() {
 getBuilder().removeConfigurer(getClass());
 return getBuilder();
 }

 @SuppressWarnings("unchecked")
 public T withObjectPostProcessor(ObjectPostProcessor<?> objectPostProcessor) {
 addObjectPostProcessor(objectPostProcessor);
 return (T) this;
 }
}

代碼很少，第二個方法就是調用SecurityConfigurerAdapter的方法，這里主要看第一個disable方法，我們在配置類中就已經使用過了，在禁用csrf的時候調用了 csrf().disable()，就是通過這個方法，將csrf的配置移除了。

繼續看disable方法是調用了AbstractConfiguredSecurityBuilder中的removeConfigurer方法，實際上就是移除LinkedHashMap中的一個元素：

private final LinkedHashMap<Class<? extends SecurityConfigurer<O, B>>, List<SecurityConfigurer<O, B>>> configurers = new LinkedHashMap<>();
public <C extends SecurityConfigurer<O, B>> List<C> removeConfigurers(Class<C> clazz) {
 List<C> configs = (List<C>) this.configurers.remove(clazz);
 if (configs == null) {
 return new ArrayList<>();
 }
 return new ArrayList<>(configs);
 }

既然有移除的方法，那肯定就有添加的方法：

private final List<SecurityConfigurer<O, B>> configurersAddedInInitializing = new ArrayList<>();
private final Map<Class<?>, Object> sharedObjects = new HashMap<>();
@SuppressWarnings("unchecked")
private <C extends SecurityConfigurer<O, B>> void add(C configurer) {
 Assert.notNull(configurer, "configurer cannot be null");
 Class<? extends SecurityConfigurer<O, B>> clazz = (Class<? extends SecurityConfigurer<O, B>>) configurer
  .getClass();
 synchronized (this.configurers) {
  if (this.buildState.isConfigured()) {
   throw new IllegalStateException("Cannot apply " + configurer + " to already built object");
  }
  List<SecurityConfigurer<O, B>> configs = null;
  if (this.allowConfigurersOfSameType) {
   configs = this.configurers.get(clazz);
  }
  configs = (configs != null) ? configs : new ArrayList<>(1);
  configs.add(configurer);
  this.configurers.put(clazz, configs);
  if (this.buildState.isInitializing()) {
   this.configurersAddedInInitializing.add(configurer);
  }
 }
}

我們自定義短信登錄的時候，在配置類中添加自定義配置： .apply(smsAuthenticationSecurityConfig)，這個apply方法實際上就是調用上面的方法，將配置添加了進去。

既然配置都添加到這個容器當中了，那什么時候取出來用呢：

private Collection<SecurityConfigurer<O, B>> getConfigurers() {
 List<SecurityConfigurer<O, B>> result = new ArrayList<>();
 for (List<SecurityConfigurer<O, B>> configs : this.configurers.values()) {
 result.addAll(configs);
 }
 return result;
}
//執行所有configurer的初始化方法
private void init() throws Exception {
 Collection<SecurityConfigurer<O, B>> configurers = getConfigurers();
 for (SecurityConfigurer<O, B> configurer : configurers) {
  configurer.init((B) this);
 }
 for (SecurityConfigurer<O, B> configurer : this.configurersAddedInInitializing) {
  configurer.init((B) this);
 }
}
//獲取到所有的configure，遍歷執行configure方法
private void configure() throws Exception {
 //從LinkedHashMap中獲取到configurer
 Collection<SecurityConfigurer<O, B>> configurers = getConfigurers();
 for (SecurityConfigurer<O, B> configurer : configurers) {
  configurer.configure((B) this);
 }
}

在init和configure方法中，調用了配置類的configure方法，到這里其實整個流程就已經通了。

我們一般自定義登錄，都會實現這個configure方法，在這個方法里初始化一個filter，然后加入到過濾器鏈中。
而這個類的init和configure方法，實際上是在調用SecurityBuilder 的build方法被調用的，具體的代碼鏈路就不說了，大家感興趣的可以自己去看一下。

最后貼一下AbstractConfiguredSecurityBuilder的所有代碼(已精簡)：

public abstract class AbstractConfiguredSecurityBuilder<O, B extends SecurityBuilder<O>>
 extends AbstractSecurityBuilder<O> {
 private final LinkedHashMap<Class<? extends SecurityConfigurer<O, B>>, List<SecurityConfigurer<O, B>>> configurers = new LinkedHashMap<>();
 private final List<SecurityConfigurer<O, B>> configurersAddedInInitializing = new ArrayList<>();
 private final Map<Class<?>, Object> sharedObjects = new HashMap<>();
 private final boolean allowConfigurersOfSameType;
 private ObjectPostProcessor<Object> objectPostProcessor;

 @SuppressWarnings("unchecked")
 public <C extends SecurityConfigurerAdapter<O, B>> C apply(C configurer) throws Exception {
 configurer.addObjectPostProcessor(this.objectPostProcessor);
 configurer.setBuilder((B) this);
 add(configurer);
 return configurer;
 }

 public <C extends SecurityConfigurer<O, B>> C apply(C configurer) throws Exception {
 add(configurer);
 return configurer;
 }

 @SuppressWarnings("unchecked")
 public <C> void setSharedObject(Class<C> sharedType, C object) {
 this.sharedObjects.put(sharedType, object);
 }

 @SuppressWarnings("unchecked")
 public <C> C getSharedObject(Class<C> sharedType) {
 return (C) this.sharedObjects.get(sharedType);
 }

 /**
 * Gets the shared objects
 * @return the shared Objects
 */
 public Map<Class<?>, Object> getSharedObjects() {
 return Collections.unmodifiableMap(this.sharedObjects);
 }
 
 @SuppressWarnings("unchecked")
 private <C extends SecurityConfigurer<O, B>> void add(C configurer) {
 Assert.notNull(configurer, "configurer cannot be null");
 Class<? extends SecurityConfigurer<O, B>> clazz = (Class<? extends SecurityConfigurer<O, B>>) configurer
 .getClass();
 synchronized (this.configurers) {
 if (this.buildState.isConfigured()) {
 throw new IllegalStateException("Cannot apply " + configurer + " to already built object");
 }
 List<SecurityConfigurer<O, B>> configs = null;
 if (this.allowConfigurersOfSameType) {
 configs = this.configurers.get(clazz);
 }
 configs = (configs != null) ? configs : new ArrayList<>(1);
 configs.add(configurer);
 this.configurers.put(clazz, configs);
 if (this.buildState.isInitializing()) {
 this.configurersAddedInInitializing.add(configurer);
 }
 }
 }


 /**
 * 通過class name移除相關的配置類
 */
 @SuppressWarnings("unchecked")
 public <C extends SecurityConfigurer<O, B>> List<C> removeConfigurers(Class<C> clazz) {
 List<C> configs = (List<C>) this.configurers.remove(clazz);
 if (configs == null) {
 return new ArrayList<>();
 }
 return new ArrayList<>(configs);
 }

 /**
 * 通過class name移除相關的配置類
 */
 @SuppressWarnings("unchecked")
 public <C extends SecurityConfigurer<O, B>> C removeConfigurer(Class<C> clazz) {
 List<SecurityConfigurer<O, B>> configs = this.configurers.remove(clazz);
 if (configs == null) {
 return null;
 }
 Assert.state(configs.size() == 1,
 () -> "Only one configurer expected for type " + clazz + ", but got " + configs);
 return (C) configs.get(0);
 }

 @SuppressWarnings("unchecked")
 public B objectPostProcessor(ObjectPostProcessor<Object> objectPostProcessor) {
 Assert.notNull(objectPostProcessor, "objectPostProcessor cannot be null");
 this.objectPostProcessor = objectPostProcessor;
 return (B) this;
 }

 protected <P> P postProcess(P object) {
 return this.objectPostProcessor.postProcess(object);
 }

 //執行所有configurer的初始化方法
 private void init() throws Exception {
 Collection<SecurityConfigurer<O, B>> configurers = getConfigurers();
 for (SecurityConfigurer<O, B> configurer : configurers) {
 configurer.init((B) this);
 }
 for (SecurityConfigurer<O, B> configurer : this.configurersAddedInInitializing) {
 configurer.init((B) this);
 }
 }
 //獲取到所有的configure，遍歷執行configure方法
 private void configure() throws Exception {
  //從LinkedHashMap中獲取到configurer
 Collection<SecurityConfigurer<O, B>> configurers = getConfigurers();
 for (SecurityConfigurer<O, B> configurer : configurers) {
 configurer.configure((B) this);
 }
 }
 //執行鉤子函數和configure方法
 protected final O doBuild() throws Exception {
 synchronized (this.configurers) {
 this.buildState = BuildState.INITIALIZING;
 beforeInit();
 init();
 this.buildState = BuildState.CONFIGURING;
 beforeConfigure();
 configure();
 this.buildState = BuildState.BUILDING;
 O result = performBuild();
 this.buildState = BuildState.BUILT;
 return result;
 }
 }
}

到此這篇關于Spring Security 自定義短信登錄認證的實現的文章就介紹到這了,更多相關SpringSecurity 短信登錄認證內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！

您可能感興趣的文章: