python用700行代碼實現http客戶端
更新時間：2021年01月14日 11:05:10 作者：終末之冬
這篇文章主要介紹了python用700行代碼實現http客戶端的方法，幫助大家更好的理解和使用python，感興趣的朋友可以了解下
本文用python在TCP的基礎上實現一個HTTP客戶端, 該客戶端能夠復用TCP連接, 使用HTTP1.1協議.
一. 創建HTTP請求
HTTP是基于TCP連接的, 它的請求報文格式如下:
因此, 我們只需要創建一個到服務器的TCP連接, 然后按照上面的格式寫好報文并發給服務器, 就實現了一個HTTP請求.
1. HTTPConnection類
基于以上的分析, 我們首先定義一個HTTPConnection類來管理連接和請求內容:
class HTTPConnection:
default_port = 80
_http_vsn = 11
_http_vsn_str = 'HTTP/1.1'
def __init__(self, host: str, port: int = None) -> None:
self.sock = None
self._buffer = []
self.host = host
self.port = port if port is not None else self.default_port
self._state = _CS_IDLE
self._response = None
self._method = None
self.block_size = 8192
def _output(self, s: Union[str, bytes]) -> None:
if hasattr(s, 'encode'):
s = s.encode('latin-1')
self._buffer.append(s)
def connect(self) -> None:
self.sock = socket.create_connection((self.host, self.port))
對于這個HTTPConnection對象, 我們只需要創建TCP連接, 然后按照HTTP協議的格式把請求數據寫入buffer中, 最后把buffer中的數據發送出去就行了.
2. 編寫請求行
請求行的內容比較簡單, 就是說明請求方法, 請求路徑和HTTP協議. 使用下面的方法來編寫一個請求行:
def put_request(self, method: str, url: str) -> None:
self._method = method
url = url or '/'
request = f'{method} {url} {self._http_vsn_str}'
self._output(request)
3. 添加請求頭
HTTP請求頭和python的字典類似, 每行都是一個字段名與值的映射關系. HTTP協議并不要求設置所有合法的請求頭的值, 我們只需要按照需要, 設置特定的請求頭即可. 使用如下代碼添加請求頭:
def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
if hasattr(header, 'encode'):
header = header.encode('ascii')
if hasattr(value, 'encode'):
value = value.encode('latin-1')
elif isinstance(value, int):
value = str(value).encode('ascii')
header = header + b': ' + value
self._output(header)
此外, 在HTTP請求中, Host請求頭字段是必須的, 否則網站可能會拒絕響應. 因此, 如果用戶沒有設置這個字段, 這里就應該主動把它加上去:
def _add_host(self, url: str) -> None:
# 所有HTTP / 1.1請求報文中必須包含一個Host頭字段
# 如果用戶沒給,就調用這個函數來生成
netloc = ''
if url.startswith('http'):
nil, netloc, nil, nil, nil = urllib.parse.urlsplit(url)
if netloc:
try:
netloc_enc = netloc.encode('ascii')
except UnicodeEncodeError:
netloc_enc = netloc.encode('idna')
self.put_header('Host', netloc_enc)
else:
host = self.host
port = self.port
try:
host_enc = host.encode('ascii')
except UnicodeEncodeError:
host_enc = host.encode('idna')
# 對IPv6的地址進行額外處理
if host.find(':') >= 0:
host_enc = b'[' + host_enc + b']'
if port == self.default_port:
self.put_header('Host', host_enc)
else:
host_enc = host_enc.decode('ascii')
self.put_header('Host', f'{host_enc}:{port}')
4. 發送請求正文
我們接受兩種形式的body數據: 一個基于io.IOBase的可讀文件對象, 或者是一個能通過迭代得到數據的對象. 在傳輸數據之前, 我們首先要確定數據是否采用分塊傳輸:
def request(self, method: str, url: str, headers: dict = None, body: Union[io.IOBase, Iterable] = None,
encode_chunked: bool = False) -> None:
...
if 'content-length' not in header_names:
if 'transfer-encoding' not in header_names:
encode_chunked = False
content_length = self._get_content_length(body, method)
if content_length is None:
if body is not None:
# 在這種情況下, body一般是個生成器或者可讀文件之類的東西,應該分塊傳輸
encode_chunked = True
self.put_header('Transfer-Encoding', 'chunked')
else:
self.put_header('Content-Length', str(content_length))
else:
# 如果設置了transfer-encoding,則根據用戶給的encode_chunked參數決定是否分塊
pass
else:
# 只要給了content-length,那么一定不是分塊傳輸
encode_chunked = False
...
@staticmethod
def _get_content_length(body: Union[str, bytes, bytearray, Iterable, io.IOBase], method: str) -> Optional[int]:
if body is None:
# PUT,POST,PATCH三個方法默認是有body的
if method.upper() in _METHODS_EXPECTING_BODY:
return 0
else:
return None
if hasattr(body, 'read'):
return None
try:
# 對于bytes或者bytearray格式的數據,通過memoryview獲取它的長度
return memoryview(body).nbytes
except TypeError:
pass
if isinstance(body, str):
return len(body)
return None
在確定了是否分塊之后, 就可以把正文發出去了. 如果body是一個可讀文件的話, 就調用_read_readable方法把它封裝為一個生成器:
def _send_body(self, message_body: Union[str, bytes, bytearray, Iterable, io.IOBase], encode_chunked: bool) -> None:
if hasattr(message_body, 'read'):
chunks = self._read_readable(message_body)
else:
try:
memoryview(message_body)
except TypeError:
try:
chunks = iter(message_body)
except TypeError:
raise TypeError(
f'message_body should be a bytes-like object or an iterable, got {repr(type(message_body))}')
else:
# 如果是字節類型的,通過一次迭代把它發出去
chunks = (message_body,)
for chunk in chunks:
if not chunk:
continue
if encode_chunked:
chunk = f'{len(chunk):X}\r\n'.encode('ascii') + chunk + b'\r\n'
self.send(chunk)
if encode_chunked:
self.send(b'0\r\n\r\n')
def _read_readable(self, readable: io.IOBase) -> Generator[bytes, None, None]:
need_encode = False
if isinstance(readable, io.TextIOBase):
need_encode = True
while True:
data_block = readable.read(self.block_size)
if not data_block:
break
if need_encode:
data_block = data_block.encode('utf-8')
yield data_block
二. 獲取響應數據
HTTP響應報文的格式與請求報文大同小異, 它大致是這樣的:
因此, 我們只要用HTTPConnection的socket對象讀取服務器發送的數據, 然后按照上面的格式對數據進行解析就行了.
1. HTTPResponse類
我們首先定義一個簡單的HTTPResponse類. 它的屬性大致上就是socket的文件對象以及一些請求的信息等等, 調用它的begin方法來解析響應行和響應頭的數據, 然后調用read方法讀取響應正文:
class HTTPResponse:
def __init__(self, sock: socket.socket, method: str = None) -> None:
self.fp = sock.makefile('rb')
self._method = method
self.headers = None
self.version = _UNKNOWN
self.status = _UNKNOWN
self.reason = _UNKNOWN
self.chunked = _UNKNOWN
self.chunk_left = _UNKNOWN
self.length = _UNKNOWN
self.will_close = _UNKNOWN
def begin(self) -> None:
...
def read(self, amount: int = None) -> bytes:
...
2. 解析狀態行
狀態行的解析比較簡單, 我們只需要讀取響應的第一行數據, 然后把它解析為HTTP協議版本,狀態碼和原因短語三部分就行了:
def _read_status(self) -> Tuple[str, int, str]:
line = str(self._read_line(), 'latin-1')
if not line:
raise RemoteDisconnected('Remote end closed connection without response')
try:
version, status, reason = line.split(None, 2)
except ValueError:
# reason只是給人看的, 一般和status對應, 所以它有可能不存在
try:
version, status = line.split(None, 1)
reason = ''
except ValueError:
version, status, reason = '', '', ''
if not version.startswith('HTTP/'):
self._close_conn()
raise BadStatusLine(line)
try:
status = int(status)
if status < 100 or status > 999:
raise BadStatusLine(line)
except ValueError:
raise BadStatusLine(line)
return version, status, reason.strip()
如果狀態碼為100, 則客戶端需要解析多個響應狀態行. 它的原理是這樣的: 在請求數據過大的時候, 有的客戶端會先不發送請求數據, 而是先在header中添加一個Expect: 100-continue, 如果服務器愿意接收數據, 會返回100的狀態碼, 這時候客戶端再把數據發過去. 因此, 如果讀取到100的狀態碼, 那么后面往往還會收到一個正式的響應數據, 應該繼續讀取響應頭. 這部分的代碼如下:
def begin(self) -> None:
while True:
version, status, reason = self._read_status()
if status != HTTPStatus.CONTINUE:
break
# 跳過100狀態碼部分的響應頭
while True:
skip = self._read_line().strip()
if not skip:
breakself.status = status
self.reason = reason
if version in ('HTTP/1.0', 'HTTP/0.9'):
self.version = 10
elif version.startswith('HTTP/1.'):
self.version = 11
else:
# HTTP2還沒研究, 這里就不寫了
raise UnknownProtocol(version)
...
3. 解析響應頭
解析響應頭比響應行還要簡單. 因為每個header字段占一行, 我們只需要一直調用read_line方法讀取字段, 直到讀完header為止就行了.
def _parse_header(self) -> None:
headers = {}
while True:
line = self._read_line()
if len(headers) > _MAX_HEADERS:
raise HTTPException('got more than %d headers' % _MAX_HEADERS)
if line in _EMPTY_LINE:
break
line = line.decode('latin-1')
i = line.find(':')
if i == -1:
raise BadHeaderLine(line)
# 這里默認沒有重名的情況
key, value = line[:i].lower(), line[i + 1:].strip()
headers[key] = value
self.headers = headers
4. 接收響應正文
在接收響應正文之前, 首先要確定它的傳輸方式和長度:
def _set_chunk(self) -> None:
transfer_encoding = self.get_header('transfer-encoding')
if transfer_encoding and transfer_encoding.lower() == 'chunked':
self.chunked = True
self.chunk_left = None
else:
self.chunked = False
def _set_length(self) -> None:
# 首先要知道數據是否是分塊傳輸?shù)?
if self.chunked == _UNKNOWN:
self._set_chunk()
# 如果狀態碼是1xx或者204(無響應內容)或者304(使用上次緩存的內容),則沒有響應正文
# 如果這是個HEAD請求,那么也不能有響應正文
if (self.status == HTTPStatus.NO_CONTENT or
self.status == HTTPStatus.NOT_MODIFIED or
100 <= self.status < 200 or
self._method == 'HEAD'):
self.length = 0
return
length = self.get_header('content-length')
if length and not self.chunked:
try:
self.length = int(length)
except ValueError:
self.length = None
else:
if self.length < 0:
self.length = None
else:
self.length = None
然后, 我們實現一個read方法, 從body中讀取指定大小的數據:
def read(self, amount: int = None) -> bytes:
if self.is_closed():
return b''
if self._method == 'HEAD':
self.close()
return b''
if amount is None:
return self._read_all()
return self._read_amount(amount)
如果沒有指定需要的數據大小, 就默認讀取所有數據:
def _read_all(self) -> bytes:
if self.chunked:
return self._read_all_chunk()
if self.length is None:
s = self.fp.read()
else:
try:
s = self._read_bytes(self.length)
except IncompleteRead:
self.close()
raise
self.length = 0
self.close()
return s
def _read_all_chunk(self) -> bytes:
assert self.chunked != _UNKNOWN
value = []
try:
while True:
chunk = self._read_chunk()
if chunk is None:
break
value.append(chunk)
return b''.join(value)
except IncompleteRead:
raise IncompleteRead(b''.join(value))
def _read_chunk(self) -> Optional[bytes]:
try:
chunk_size = self._read_chunk_size()
except ValueError:
raise IncompleteRead(b'')
if chunk_size == 0:
self._read_and_discard_trailer()
self.close()
return None
chunk = self._read_bytes(chunk_size)
# 每塊的結尾會有一個\r\n,這里把它讀掉
self._read_bytes(2)
return chunk
def _read_chunk_size(self) -> int:
line = self._read_line(error_message='chunk size')
i = line.find(b';')
if i >= 0:
line = line[:i]
try:
return int(line, 16)
except ValueError:
self.close()
raise
def _read_and_discard_trailer(self) -> None:
# chunk的尾部可能會掛一些額外的信息,比如MD5值,過期時間等等,一般會在header中用trailer字段說明
# 當chunk讀完之后調用這個函數, 這些信息就先舍棄掉得了
while True:
line = self._read_line(error_message='chunk size')
if line in _EMPTY_LINE:
break
否則的話, 就讀取部分數據, 如果正好是分塊數據的話, 就比較復雜了. 簡單來說, 就是用bytearray制造一個所需大小的數組, 然后依次讀取chunk把數據往里面填, 直到填滿或者沒數據為止. 然后用chunk_left記錄下當前塊剩余的量, 以便下次讀取.
def _read_amount(self, amount: int) -> bytes:
if self.chunked:
return self._read_amount_chunk(amount)
if isinstance(self.length, int) and amount > self.length:
amount = self.length
container = bytearray(amount)
n = self.fp.readinto(container)
if not n and container:
# 如果讀不到字節了,也就可以關了
self.close()
elif self.length is not None:
self.length -= n
if not self.length:
self.close()
return memoryview(container)[:n].tobytes()
def _read_amount_chunk(self, amount: int) -> bytes:
# 調用這個方法,讀取amount大小的chunk類型數據,不足就全部讀取
assert self.chunked != _UNKNOWN
total_bytes = 0
container = bytearray(amount)
mvb = memoryview(container)
try:
while True:
# mvb可以理解為容器的空的那一部分
# 這里一直調用_full_readinto把數據填進去,讓mvb越來越小,同時記錄填入的量
# 等沒數據或者當前數據足夠把mvb填滿之后,跳出循環
chunk_left = self._get_chunk_left()
if chunk_left is None:
break
if len(mvb) <= chunk_left:
n = self._full_readinto(mvb)
self.chunk_left = chunk_left - n
total_bytes += n
break
temp_mvb = mvb[:chunk_left]
n = self._full_readinto(temp_mvb)
mvb = mvb[n:]
total_bytes += n
self.chunk_left = 0
except IncompleteRead:
raise IncompleteRead(bytes(container[:total_bytes]))
return memoryview(container)[:total_bytes].tobytes()
def _full_readinto(self, container: memoryview) -> int:
# 返回讀取的量.如果沒能讀滿,這個方法會報警
amount = len(container)
n = self.fp.readinto(container)
if n < amount:
raise IncompleteRead(bytes(container[:n]), amount - n)
return n
def _get_chunk_left(self) -> Optional[int]:
# 如果當前塊讀了一半,那么直接返回self.chunk_left就行了
# 否則,有三種情況
# 1). chunk_left為None,說明body壓根沒開始讀,于是返回當前這一整塊的長度
# 2). chunk_left為0,說明這塊讀完了,于是返回下一塊的長度
# 3). body數據讀完了,返回None,順便做好善后工作
chunk_left = self.chunk_left
if not chunk_left:
if chunk_left == 0:
# 如果剩余零,說明上一塊已經讀完了,這里把\r\n讀掉
# 如果是None,就說明chunk壓根沒開始讀
self._read_bytes(2)
try:
chunk_left = self._read_chunk_size()
except ValueError:
raise IncompleteRead(b'')
if chunk_left == 0:
self._read_and_discard_trailer()
self.close()
chunk_left = None
self.chunk_left = chunk_left
return chunk_left
三. 復用TCP連接
HTTP通信本質上是基于TCP連接發送和接收HTTP請求和響應, 因此, 只要TCP連接不斷開, 我們就可以繼續用它進行HTTP請求, 這樣就避免了創建和銷毀TCP連接產生的消耗.
1. 判斷連接是否會斷開
在下面幾種情況中, 服務端會自動斷開連接:
- HTTP協議小于1.1且沒有在頭部設置了keep-alive
- HTTP協議大于等于1.1但是在頭部設置了connection: close
- 數據沒有分塊傳輸, 也沒有說明數據的長度, 這種情況下, 服務器一般會在發送完成后斷開連接, 讓客戶端知道數據發完了
根據上面列出來的幾種情況, 通過下面的代碼來判斷連接是否會斷開:
def _check_close(self) -> bool:
conn = self.get_header('connection')
if not self.chunked and self.length is None:
return True
if self.version == 11:
if conn and 'close' in conn.lower():
return True
return False
else:
if self.headers.get('keep-alive'):
return False
if conn and 'keep-alive' in conn.lower():
return False
return True
2. 正確地關閉HTTPResponse對象
由于TCP連接的復用, 一個HTTPConnection可以產生多個HTTPResponse對象, 而這些對象在同一個TCP連接上, 會共用這個連接的讀緩沖區. 這就導致, 如果上一個HTTPResponse對象沒有把它的那部分數據讀完, 就會對下一個響應產生影響.
另一方面來看, 我們也需要及時地關閉與這個TCP關聯的文件對象來避免占用資源. 因此, 我們定義如下的close方法關閉一個HTTPResponse對象:
def close(self) -> None:
if self.is_closed():
return
fp = self.fp
self.fp = None
fp.close()
def is_closed(self) -> bool:
return self.fp is None
用戶調用HTTPResponse對象的read方法, 把緩沖區數據讀完之后, 就會自動調用close方法(具體實現見上一章的第四節: 讀取響應數據這部分). 因此, 在獲取下一個響應數據之前, 我們只需要調用這個對象的is_closed方法, 就能判斷讀緩沖區是否已經讀完, 能否繼續接收響應了.
3. HTTP請求的生命周期
不使用管道機制的話, 不同的HTTP請求必須按次序進行, 相互之間不能重疊. 基于這個原因, 我們?yōu)镠TTPConnection對象設置IDLE, REQ_STARTED和REQ_SENT三種狀態, 一個完整的請求應該經歷這幾種狀態:
根據上面的流程, 對HTTPConnection中對應的方法進行修改:
def get_response(self) -> HTTPResponse:
if self._response and self._response.is_closed():
self._response = None
if self._state != _CS_REQ_SENT or self._response:
raise ResponseNotReady(self._state)
response = HTTPResponse(self.sock, method=self._method)
try:
try:
response.begin()
except ConnectionError:
self.close()
raise
assert response.will_close != _UNKNOWN
self._state = _CS_IDLE
if response.will_close:
self.close()
else:
self._response = response
return response
except Exception as _:
response.close()
raise
def put_request(self, method: str, url: str) -> None:
# 調用這個函數開始新一輪的請求,它負責寫好請求行輸出到緩存里面去
# 調用它的前提是當前處于空閑狀態
# 如果之前的response還在并且已結束,會自動把它消除掉
if self._response and self._response.is_closed():
self._response = None
if self._state == _CS_IDLE:
self._state = _CS_REQ_STARTED
else:
raise CannotSendRequest(self._state)
...
def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
if self._state != _CS_REQ_STARTED:
raise CannotSendHeader()
...
def end_headers(self, message_body=None, encode_chunked=False) -> None:
if self._state == _CS_REQ_STARTED:
self._state = _CS_REQ_SENT
else:
raise CannotSendHeader()
...
需要注意的是, 如果第二個請求已經進入到獲取響應的階段了, 而上一個請求的響應還沒關閉, 那么就應該直接報錯, 否則讀取到的會是上一個請求剩余的響應部分數據, 導致解析響應出現問題.
事實上, HTTP1.1開始支持管道化技術, 也就是一次提交多個HTTP請求, 然后等待響應, 而不是在接收到上一個請求的響應后, 才發送后面的請求.
基于這種處理模式, 管道化技術理論上可以減少IO時間的損耗, 提升效率, 不過, 需要服務端的支持, 而且會增加程序的復雜程度, 這里就不實現了.
四. 總結
1. 完整代碼
HTTPConnection的完整代碼如下:
class HTTPConnection:
default_port = 80
_http_vsn = 11
_http_vsn_str = 'HTTP/1.1'
def __init__(self, host: str, port: int = None) -> None:
self.sock = None
self._buffer = []
self.host = host
self.port = port if port is not None else self.default_port
self._state = _CS_IDLE
self._response = None
self._method = None
self.block_size = 8192
def request(self, method: str, url: str, headers: dict = None, body: Union[io.IOBase, Iterable] = None,
encode_chunked: bool = False) -> None:
self.put_request(method, url)
headers = headers or {}
header_names = frozenset(k.lower() for k in headers.keys())
if 'host' not in header_names:
self._add_host(url)
if 'content-length' not in header_names:
if 'transfer-encoding' not in header_names:
encode_chunked = False
content_length = self._get_content_length(body, method)
if content_length is None:
if body is not None:
encode_chunked = True
self.put_header('Transfer-Encoding', 'chunked')
else:
self.put_header('Content-Length', str(content_length))
else:
# 如果設置了transfer-encoding,則根據用戶給的encode_chunked參數決定是否分塊
pass
else:
# 只要給了content-length,那么一定不是分塊傳輸
encode_chunked = False
for hdr, value in headers.items():
self.put_header(hdr, value)
if isinstance(body, str):
body = _encode(body)
self.end_headers(body, encode_chunked=encode_chunked)
def send(self, data: bytes) -> None:
if self.sock is None:
self.connect()
self.sock.sendall(data)
def get_response(self) -> HTTPResponse:
if self._response and self._response.is_closed():
self._response = None
if self._state != _CS_REQ_SENT or self._response:
raise ResponseNotReady(self._state)
response = HTTPResponse(self.sock, method=self._method)
try:
try:
response.begin()
except ConnectionError:
self.close()
raise
assert response.will_close != _UNKNOWN
self._state = _CS_IDLE
if response.will_close:
self.close()
else:
self._response = response
return response
except Exception as _:
response.close()
raise
def connect(self) -> None:
self.sock = socket.create_connection((self.host, self.port))
def close(self) -> None:
self._state = _CS_IDLE
try:
sock = self.sock
if sock:
self.sock = None
sock.close()
finally:
response = self._response
if response:
self._response = None
response.close()
def put_request(self, method: str, url: str) -> None:
# 調用這個函數開始新一輪的請求,它負責寫好請求行輸出到緩存里面去
# 調用它的前提是當前處于空閑狀態
# 如果之前的response還在并且已結束,會自動把它消除掉
if self._response and self._response.is_closed():
self._response = None
if self._state == _CS_IDLE:
self._state = _CS_REQ_STARTED
else:
raise CannotSendRequest(self._state)
self._method = method
url = url or '/'
request = f'{method} {url} {self._http_vsn_str}'
self._output(request)
def put_header(self, header: Union[bytes, str], value: Union[bytes, str, int]) -> None:
if self._state != _CS_REQ_STARTED:
raise CannotSendHeader()
if hasattr(header, 'encode'):
header = header.encode('ascii')
if hasattr(value, 'encode'):
value = value.encode('latin-1')
elif isinstance(value, int):
value = str(value).encode('ascii')
header = header + b': ' + value
self._output(header)
def end_headers(self, message_body=None, encode_chunked=False) -> None:
if self._state == _CS_REQ_STARTED:
self._state = _CS_REQ_SENT
else:
raise CannotSendHeader()
self._send_output(message_body, encode_chunked=encode_chunked)
def _add_host(self, url: str) -> None:
# 所有HTTP / 1.1請求報文中必須包含一個Host頭字段
# 如果用戶沒給,就調用這個函數來生成
netloc = ''
if url.startswith('http'):
nil, netloc, nil, nil, nil = urlsplit(url)
if netloc:
try:
netloc_enc = netloc.encode('ascii')
except UnicodeEncodeError:
netloc_enc = netloc.encode('idna')
self.put_header('Host', netloc_enc)
else:
host = self.host
port = self.port
try:
host_enc = host.encode('ascii')
except UnicodeEncodeError:
host_enc = host.encode('idna')
# 對IPv6的地址進行額外處理
if host.find(':') >= 0:
host_enc = b'[' + host_enc + b']'
if port == self.default_port:
self.put_header('Host', host_enc)
else:
host_enc = host_enc.decode('ascii')
self.put_header('Host', f'{host_enc}:{port}')
def _output(self, s: Union[str, bytes]) -> None:
# 將數據添加到緩沖區
if hasattr(s, 'encode'):
s = s.encode('latin-1')
self._buffer.append(s)
def _send_output(self, message_body=None, encode_chunked=False) -> None:
# 發送并清空緩沖數據.然后,如果有請求正文,就也順便發送
self._buffer.extend((b'', b''))
msg = b'\r\n'.join(self._buffer)
self._buffer.clear()
self.send(msg)
if message_body is not None:
self._send_body(message_body, encode_chunked)
def _send_body(self, message_body: Union[bytes, str, bytearray, Iterable, io.IOBase], encode_chunked: bool) -> None:
if hasattr(message_body, 'read'):
chunks = self._read_readable(message_body)
else:
try:
memoryview(message_body)
except TypeError:
try:
chunks = iter(message_body)
except TypeError:
raise TypeError(
f'message_body should be a bytes-like object or an iterable, got {repr(type(message_body))}')
else:
# 如果是字節類型的,通過一次迭代把它發出去
chunks = (message_body,)
for chunk in chunks:
if not chunk:
continue
if encode_chunked:
chunk = f'{len(chunk):X}\r\n'.encode('ascii') + chunk + b'\r\n'
self.send(chunk)
if encode_chunked:
self.send(b'0\r\n\r\n')
def _read_readable(self, readable: io.IOBase) -> Generator[bytes, None, None]:
need_encode = False
if isinstance(readable, io.TextIOBase):
need_encode = True
while True:
data_block = readable.read(self.block_size)
if not data_block:
break
if need_encode:
data_block = data_block.encode('utf-8')
yield data_block
@staticmethod
def _get_content_length(body: Union[str, bytes, bytearray, Iterable, io.IOBase], method: str) -> Optional[int]:
if body is None:
# PUT,POST,PATCH三個方法默認是有body的
if method.upper() in _METHODS_EXPECTING_BODY:
return 0
else:
return None
if hasattr(body, 'read'):
return None
try:
# 對于bytes或者bytearray格式的數據,通過memoryview獲取它的長度
return memoryview(body).nbytes
except TypeError:
pass
if isinstance(body, str):
return len(body)
return None
HTTPResponse的完整代碼如下:
class HTTPResponse:
def __init__(self, sock: socket.socket, method: str = None) -> None:
self.fp = sock.makefile('rb')
self._method = method
self.headers = None
self.version = _UNKNOWN
self.status = _UNKNOWN
self.reason = _UNKNOWN
self.chunked = _UNKNOWN
self.chunk_left = _UNKNOWN
self.length = _UNKNOWN
self.will_close = _UNKNOWN
def begin(self) -> None:
if self.headers is not None:
return
self._parse_status_line()
self._parse_header()
self._set_chunk()
self._set_length()
self.will_close = self._check_close()
def _read_line(self, limit: int = _MAX_LINE + 1, error_message: str = '') -> bytes:
# 注意,這個方法默認不去除line尾部的\r\n
line = self.fp.readline(limit)
if len(line) > _MAX_LINE:
raise LineTooLong(error_message)
return line
def _read_bytes(self, amount: int) -> bytes:
data = self.fp.read(amount)
if len(data) < amount:
raise IncompleteRead(data, amount - len(data))
return data
def _parse_status_line(self) -> None:
while True:
version, status, reason = self._read_status()
if status != HTTPStatus.CONTINUE:
break
while True:
skip = self._read_line(error_message='header line').strip()
if not skip:
break
self.status = status
self.reason = reason
if version in ('HTTP/1.0', 'HTTP/0.9'):
self.version = 10
elif version.startswith('HTTP/1.'):
self.version = 11
else:
raise UnknownProtocol(version)
def _read_status(self) -> Tuple[str, int, str]:
line = str(self._read_line(error_message='status line'), 'latin-1')
if not line:
raise RemoteDisconnected('Remote end closed connection without response')
try:
version, status, reason = line.split(None, 2)
except ValueError:
# reason只是給人看的, 和status對應, 所以它有可能不存在
try:
version, status = line.split(None, 1)
reason = ''
except ValueError:
version, status, reason = '', '', ''
if not version.startswith('HTTP/'):
self.close()
raise BadStatusLine(line)
try:
status = int(status)
if status < 100 or status > 999:
raise BadStatusLine(line)
except ValueError:
raise BadStatusLine(line)
return version, status, reason.strip()
def _parse_header(self) -> None:
headers = {}
while True:
line = self._read_line(error_message='header line')
if len(headers) > _MAX_HEADERS:
raise HTTPException('got more than %d headers' % _MAX_HEADERS)
if line in _EMPTY_LINE:
break
line = line.decode('latin-1')
i = line.find(':')
if i == -1:
raise BadHeaderLine(line)
# 這里默認沒有重名的情況
key, value = line[:i].lower(), line[i + 1:].strip()
headers[key] = value
self.headers = headers
def _set_chunk(self) -> None:
transfer_encoding = self.get_header('transfer-encoding')
if transfer_encoding and transfer_encoding.lower() == 'chunked':
self.chunked = True
self.chunk_left = None
else:
self.chunked = False
def _set_length(self) -> None:
# 首先要知道數據是否是分塊傳輸?shù)?
if self.chunked == _UNKNOWN:
self._set_chunk()
# 如果狀態碼是1xx或者204(無響應內容)或者304(使用上次緩存的內容),則沒有響應正文
# 如果這是個HEAD請求,那么也不能有響應正文
assert isinstance(self.status, int)
if (self.status == HTTPStatus.NO_CONTENT or
self.status == HTTPStatus.NOT_MODIFIED or
100 <= self.status < 200 or
self._method == 'HEAD'):
self.length = 0
return
length = self.get_header('content-length')
if length and not self.chunked:
try:
self.length = int(length)
except ValueError:
self.length = None
else:
if self.length < 0:
self.length = None
else:
self.length = None
def _check_close(self) -> bool:
conn = self.get_header('connection')
if not self.chunked and self.length is None:
return True
if self.version == 11:
if conn and 'close' in conn.lower():
return True
return False
else:
if self.headers.get('keep-alive'):
return False
if conn and 'keep-alive' in conn.lower():
return False
return True
def close(self) -> None:
if self.is_closed():
return
fp = self.fp
self.fp = None
fp.close()
def is_closed(self) -> bool:
return self.fp is None
def read(self, amount: int = None) -> bytes:
if self.is_closed():
return b''
if self._method == 'HEAD':
self.close()
return b''
if amount is None:
return self._read_all()
print(amount, amount is None)
return self._read_amount(amount)
def _read_all(self) -> bytes:
if self.chunked:
return self._read_all_chunk()
if self.length is None:
s = self.fp.read()
else:
try:
s = self._read_bytes(self.length)
except IncompleteRead:
self.close()
raise
self.length = 0
self.close()
return s
def _read_all_chunk(self) -> bytes:
assert self.chunked != _UNKNOWN
value = []
try:
while True:
chunk = self._read_chunk()
if chunk is None:
break
value.append(chunk)
return b''.join(value)
except IncompleteRead:
raise IncompleteRead(b''.join(value))
def _read_chunk(self) -> Optional[bytes]:
try:
chunk_size = self._read_chunk_size()
except ValueError:
raise IncompleteRead(b'')
if chunk_size == 0:
self._read_and_discard_trailer()
self.close()
return None
chunk = self._read_bytes(chunk_size)
# 每塊的結尾會有一個\r\n,這里把它讀掉
self._read_bytes(2)
return chunk
def _read_chunk_size(self) -> int:
line = self._read_line(error_message='chunk size')
i = line.find(b';')
if i >= 0:
line = line[:i]
try:
return int(line, 16)
except ValueError:
self.close()
raise
def _read_and_discard_trailer(self) -> None:
# chunk的尾部可能會掛一些額外的信息,比如MD5值,過期時間等等,一般會在header中用trailer字段說明
# 當chunk讀完之后調用這個函數, 這些信息就先舍棄掉得了
while True:
line = self._read_line(error_message='chunk size')
if line in _EMPTY_LINE:
break
def _read_amount(self, amount: int) -> bytes:
if self.chunked:
return self._read_amount_chunk(amount)
if isinstance(self.length, int) and amount > self.length:
amount = self.length
container = bytearray(amount)
n = self.fp.readinto(container)
if not n and container:
# 如果讀不到字節了,也就可以關了
self.close()
elif self.length is not None:
self.length -= n
if not self.length:
self.close()
return memoryview(container)[:n].tobytes()
def _read_amount_chunk(self, amount: int) -> bytes:
# 調用這個方法,讀取amount大小的chunk類型數據,不足就全部讀取
assert self.chunked != _UNKNOWN
total_bytes = 0
container = bytearray(amount)
mvb = memoryview(container)
try:
while True:
# mvb可以理解為容器的空的那一部分
# 這里一直調用_full_readinto把數據填進去,讓mvb越來越小,同時記錄填入的量
# 等沒數據或者當前數據足夠把mvb填滿之后,跳出循環
chunk_left = self._get_chunk_left()
if chunk_left is None:
break
if len(mvb) <= chunk_left:
n = self._full_readinto(mvb)
self.chunk_left = chunk_left - n
total_bytes += n
break
temp_mvb = mvb[:chunk_left]
n = self._full_readinto(temp_mvb)
mvb = mvb[n:]
total_bytes += n
self.chunk_left = 0
except IncompleteRead:
raise IncompleteRead(bytes(container[:total_bytes]))
return memoryview(container)[:total_bytes].tobytes()
def _full_readinto(self, container: memoryview) -> int:
# 返回讀取的量.如果沒能讀滿,這個方法會報警
amount = len(container)
n = self.fp.readinto(container)
if n < amount:
raise IncompleteRead(bytes(container[:n]), amount - n)
return n
def _get_chunk_left(self) -> Optional[int]:
# 如果當前塊讀了一半,那么直接返回self.chunk_left就行了
# 否則,有三種情況
# 1). chunk_left為None,說明body壓根沒開始讀,于是返回當前這一整塊的長度
# 2). chunk_left為0,說明這塊讀完了,于是返回下一塊的長度
# 3). body數據讀完了,返回None,順便做好善后工作
chunk_left = self.chunk_left
if not chunk_left:
if chunk_left == 0:
# 如果剩余零,說明上一塊已經讀完了,這里把\r\n讀掉
# 如果是None,就說明chunk壓根沒開始讀
self._read_bytes(2)
try:
chunk_left = self._read_chunk_size()
except ValueError:
raise IncompleteRead(b'')
if chunk_left == 0:
self._read_and_discard_trailer()
self.close()
chunk_left = None
self.chunk_left = chunk_left
return chunk_left
def get_header(self, name, default: str = None) -> Optional[str]:
if self.headers is None:
raise ResponseNotReady()
return self.headers.get(name, default)
@property
def info(self) -> str:
return repr(self.headers)
這兩個類應該放到同一個py文件中, 同時這個文件內還有其他一些輔助性質的代碼:
import io
import socket
from typing import Generator, Iterable, Optional, Tuple, Union
from urllib.parse import urlsplit
_CS_IDLE = 'Idle'
_CS_REQ_STARTED = 'Request-started'
_CS_REQ_SENT = 'Request-sent'
_METHODS_EXPECTING_BODY = {'PATCH', 'POST', 'PUT'}
_UNKNOWN = 'UNKNOWN'
_MAX_LINE = 65536
_MAX_HEADERS = 100
_EMPTY_LINE = (b'\r\n', b'\n', b'')
class HTTPStatus:
CONTINUE = 100
SWITCHING_PROTOCOLS = 101
PROCESSING = 102
OK = 200
CREATED = 201
ACCEPTED = 202
NON_AUTHORITATIVE_INFORMATION = 203
NO_CONTENT = 204
RESET_CONTENT = 205
PARTIAL_CONTENT = 206
MULTI_STATUS = 207
ALREADY_REPORTED = 208
IM_USED = 226
MULTIPLE_CHOICES = 300
MOVED_PERMANENTLY = 301
FOUND = 302
SEE_OTHER = 303
NOT_MODIFIED = 304
USE_PROXY = 305
TEMPORARY_REDIRECT = 307
PERMANENT_REDIRECT = 308
BAD_REQUEST = 400
UNAUTHORIZED = 401
PAYMENT_REQUIRED = 402
FORBIDDEN = 403
NOT_FOUND = 404
METHOD_NOT_ALLOWED = 405
NOT_ACCEPTABLE = 406
PROXY_AUTHENTICATION_REQUIRED = 407
REQUEST_TIMEOUT = 408
CONFLICT = 409
GONE = 410
LENGTH_REQUIRED = 411
PRECONDITION_FAILED = 412
REQUEST_ENTITY_TOO_LARGE = 413
REQUEST_URI_TOO_LONG = 414
UNSUPPORTED_MEDIA_TYPE = 415
REQUESTED_RANGE_NOT_SATISFIABLE = 416
EXPECTATION_FAILED = 417
MISDIRECTED_REQUEST = 421
UNPROCESSABLE_ENTITY = 422
LOCKED = 423
FAILED_DEPENDENCY = 424
UPGRADE_REQUIRED = 426
PRECONDITION_REQUIRED = 428
TOO_MANY_REQUESTS = 429
REQUEST_HEADER_FIELDS_TOO_LARGE = 431
UNAVAILABLE_FOR_LEGAL_REASONS = 451
INTERNAL_SERVER_ERROR = 500
NOT_IMPLEMENTED = 501
BAD_GATEWAY = 502
SERVICE_UNAVAILABLE = 503
GATEWAY_TIMEOUT = 504
HTTP_VERSION_NOT_SUPPORTED = 505
VARIANT_ALSO_NEGOTIATES = 506
INSUFFICIENT_STORAGE = 507
LOOP_DETECTED = 508
NOT_EXTENDED = 510
NETWORK_AUTHENTICATION_REQUIRED = 511
class HTTPResponse:
...
class HTTPConnection:
...
def _encode(data: str, encoding: str = 'latin-1', name: str = 'data') -> bytes:
# 給請求正文等不知道能怎么轉碼的東西轉碼時用這個,默認使用latin-1編碼
# 它的好處是,轉碼失敗后能拋出詳細的錯誤信息,一目了然
try:
return data.encode(encoding)
except UnicodeEncodeError as err:
raise UnicodeEncodeError(
err.encoding,
err.object,
err.start,
err.end,
"{} ({:.20!r}) is not valid {}. Use {}.encode('utf-8') if you want to send it encoded in UTF-8.".format(
name.title(), data[err.start:err.end], encoding, name)
) from None
class HTTPException(Exception):
pass
class ImproperConnectionState(HTTPException):
pass
class CannotSendRequest(ImproperConnectionState):
pass
class CannotSendHeader(ImproperConnectionState):
pass
class CannotCloseStream(ImproperConnectionState):
pass
class ResponseNotReady(ImproperConnectionState):
pass
class LineTooLong(HTTPException):
def __init__(self, line_type):
HTTPException.__init__(self, 'got more than %d bytes when reading %s'
% (_MAX_LINE, line_type))
class BadStatusLine(HTTPException):
def __init__(self, line):
if not line:
line = repr(line)
self.args = line,
self.line = line
class BadHeaderLine(HTTPException):
def __init__(self, line):
if not line:
line = repr(line)
self.args = line,
self.line = line
class RemoteDisconnected(ConnectionResetError, BadStatusLine):
def __init__(self, *args, **kwargs):
BadStatusLine.__init__(self, '')
ConnectionResetError.__init__(self, *args, **kwargs)
class UnknownProtocol(HTTPException):
def __init__(self, version):
self.args = version,
self.version = version
class UnknownTransferEncoding(HTTPException):
pass
class IncompleteRead(HTTPException):
def __init__(self, partial, expected=None):
self.args = partial,
self.partial = partial
self.expected = expected
def __repr__(self):
if self.expected is not None:
e = f', {self.expected} more expected'
else:
e = ''
return f'{self.__class__.__name__}({len(self.partial)} bytes read{e})'
__str__ = object.__str__
2. 需要注意的點
總的來說, 本文的內容不算復雜, 畢竟HTTP屬于不難理解, 但知識點很多很雜的類型. 這里把本文中一些需要注意的點總結一下:
- 請求和響應數據的結構大致相同, 都是狀態行+頭部+正文, 狀態行和頭部的每個字段都用一個\r\n分割, 與正文之間用兩個分割;
- 狀態行是必須的, 請求頭則最少需要host這個字段, 同時為了大家的方便, 你最好也設置一下Accept-encoding和Accept來限制服務器返回給你的數據內容和格式;
- 正文不是必須的, 特別是對于除了3P(PATCH, POST, PUT)之外的方法來說. 如果你有正文, 你最好在header中使用Content-Length說明正文的長度, 如果是分塊發送, 則使用Transfer-Encoding字段說明;
- 如果對正文使用分塊傳輸, 每塊的格式是: 16進制的數據長度+\r\n+數據+\r\n, 使用0\r\n\r\n來收尾. 收尾之后, 你還可以放一個trailer, 里面放數據的MD5值或者過期時間什么的, 這時候最好在header中設置trailer字段;
- 在一個請求的生命周期完成后, TCP連接是否會斷開取決于三點: 響應數據的HTTP版本, 響應頭中的Connection和Keep-Alive字段, 是否知道響應正文的長度;
- 最最重要的一點, HTTP協議只是一個約定而非限制, 這就和礦泉水的建議零售價差不多, 你可以選擇遵守, 也可以不遵守, 后果自負.
3. 結果測試
首先, 我們用tornado寫一個簡單的服務器, 它會顯示客戶端的地址和接口;
import tornado.web
import tornado.ioloop
class IndexHandler(tornado.web.RequestHandler):
def get(self) -> None:
print(f'new connection from {self.request.connection.context.address}')
self.write('hello world')
app = tornado.web.Application([(r'/', IndexHandler)])
app.listen(8888)
tornado.ioloop.IOLoop.current().start()
然后, 使用我們剛寫好的客戶端進行測試:
from client import HTTPConnection
def fetch(conn: HTTPConnection, url: str = '') -> None:
conn.request('GET', url)
res = conn.get_response()
print(res.read())
connection = HTTPConnection('127.0.0.1', 8888)
for i in range(10):
fetch(connection)
結果如下:
以上就是python用700行代碼實現http客戶端的詳細內容，更多關于python http客戶端的資料請關注腳本之家其它相關文章！
您可能感興趣的文章:
- 詳談python http長連接客戶端
- Python HTTP客戶端自定義Cookie實現實例
- 使用httplib模塊來制作Python下HTTP客戶端的方法
- 使用基于Python的Tornado框架的HTTP客戶端的教程
- 如何用python實現一個HTTP連接池
- Python Http請求json解析庫用法解析
- python3從網絡攝像機解析mjpeg http流的示例
- 基于Python模擬瀏覽器發送http請求
- Python requests HTTP驗證登錄實現流程
- Python實現http接口自動化測試的示例代碼
- 詳解用python -m http.server搭一個簡易的本地局域網
相關文章
python實現人臉識別經典算法（一） 特征臉法
這篇文章主要為大家詳細介紹了python實現人臉識別經典算法，特征臉法，文中示例代碼介紹的非常詳細，具有一定的參考價值，感興趣的小伙伴們可以參考一下2018-03-03
Python連接打印機實現自動化打印的實用技巧和示例代碼
在計算機科學領域,打印機是一種重要的外部設備,用于將電子文檔轉換成實際的紙質文件,下面這篇文章主要給大家介紹了關于Python連接打印機實現自動化打印的實用技巧和示例代碼,需要的朋友可以參考下2024-05-05
這篇文章主要介紹了Python使用Requests請求網頁方式，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2023-03-03
pyinstaller是一個非常簡單的打包python的py文件的庫,下面這篇文章主要給大家介紹了關于Python?Pyinstaller庫安裝步驟以及使用方法的相關資料,文中通過圖文介紹的非常詳細,需要的朋友可以參考下2022-08-08
python 使用openpyxl讀取excel數據
這篇文章主要介紹了python 使用openpyxl讀取excel數據的方法，幫助大家更好的理解和學習使用python，感興趣的朋友可以了解下2021-02-02
這篇文章主要介紹了python函數形參用法,較為詳細的講述了Python函數形參的功能、定義及使用技巧,需要的朋友可以參考下2015-08-08
在 Python 中,變量是用于存儲數據的名稱,它可以保存不同類型的數據,在Python中,有兩種類型的注釋：單行注釋和多行注釋,本文就給大家詳細的介紹一下python中的變量與注釋,需要的朋友可以參考下2023-08-08
Python 分析Nginx訪問日志并保存到MySQL數據庫實例
這篇文章主要介紹了Python 分析Nginx訪問日志并保存到MySQL數據庫實例,需要的朋友可以參考下2014-03-03
這篇文章主要介紹了python調用windows api鎖定計算機示例,需要的朋友可以參考下2014-04-04
python使用tomorrow實現多線程的例子
今天小編就為大家分享一篇python使用tomorrow實現多線程的例子，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2019-07-07