使用VSCode對Golang程序進行調試時會遇到數據截?cái)鄦栴}，string只顯示前64個字符，array只顯示前64個數據。經查dlv是支持以參數方式來控制的。

發現VSCode的Golang插件里面有個叫做go.delveConfig的配置，是可以設置dlv參數的。分享一下我的整個Golang配置：

"go.buildOnSave": "off",
  "go.formatTool": "goimports",
  "go.lintTool": "golangci-lint", //go get -u github.com/golangci/golangci-lint/cmd/golangci-lint
  "go.autocompleteUnimportedPackages": true,
  "go.gotoSymbol.includeImports": true,
  "go.useLanguageServer": true,
  "go.delveConfig": {
    "dlvLoadConfig": {
      "followPointers": true,
      "maxVariableRecurse": 3,
      "maxStringLen": 1024,
      "maxArrayValues": 1024,
      "maxStructFields": -1
    },
  },
  "[go]": {
    "editor.formatOnSave": true,
    "editor.codeActionsOnSave": {
      "source.organizeImports": true
    }
  },

需要改的主要是maxStringLen、maxArrayValues、maxVariableRecurse這三個字段。

參考：https://stackoverflow.com/questions/52416263/how-do-i-print-the-full-value-of-a-string-variable-in-delve

ps：下面看下Golang dlv 工具debug 調試注意項

總結一下關于Go 的調試工具dlv：https://github.com/derekparker/delve 的使用注意項。

安裝：

go get -u github.com/go-delve/delve/cmd/dlv

配置：

以Centos為例

export GOROOT=/usr/lib/golang
export GOPATH=$HOME/go
export PATH=$PATH:$GOPATH/bin

使用

以某go服務為例：

• dlv debug xxx.go 指定需要debug的文件
• 進入dlv交互式窗口后，b <filename>:<line> 指定斷點
• r arg 指定運行參數
• n 執行一行
• c 運行至斷點或程序結束

dlv debug /home/xxx/server.go
(dlv) b /home/xxx/server.go:258
(dlv) r 1
(dlv) n
(dlv) c

注意： b <filename>:<line> 指定斷點時，若該行號對應的代碼內容為無具體語義的代碼（括號、注釋等），則會報錯：

Command failed: could not find /home/xxx/server.go:258

此時可用list 命令先查看上下文代碼，避免將無具體語義的代碼設為斷點。

命令集

The following commands are available:
    args ------------------------ Print function arguments.
    break (alias: b) ------------ Sets a breakpoint.
    breakpoints (alias: bp) ----- Print out info for active breakpoints.
    call ------------------------ Resumes process, injecting a function call (EXPERIMENTAL!!!)
    clear ----------------------- Deletes breakpoint.
    clearall -------------------- Deletes multiple breakpoints.
    condition (alias: cond) ----- Set breakpoint condition.
    config ---------------------- Changes configuration parameters.
    continue (alias: c) --------- Run until breakpoint or program termination.
    deferred -------------------- Executes command in the context of a deferred call.
    disassemble (alias: disass) - Disassembler.
    down ------------------------ Move the current frame down.
    edit (alias: ed) ------------ Open where you are in $DELVE_EDITOR or $EDITOR
    exit (alias: quit | q) ------ Exit the debugger.
    frame ----------------------- Set the current frame, or execute command on a different frame.
    funcs ----------------------- Print list of functions.
    goroutine ------------------- Shows or changes current goroutine
    goroutines ------------------ List program goroutines.
    help (alias: h) ------------- Prints the help message.
    list (alias: ls | l) -------- Show source code.
    locals ---------------------- Print local variables.
    next (alias: n) ------------- Step over to next source line.
    on -------------------------- Executes a command when a breakpoint is hit.
    print (alias: p) ------------ Evaluate an expression.
    regs ------------------------ Print contents of CPU registers.
    restart (alias: r) ---------- Restart process.
    set ------------------------- Changes the value of a variable.
    source ---------------------- Executes a file containing a list of delve commands
    sources --------------------- Print list of source files.
    stack (alias: bt) ----------- Print stack trace.
    step (alias: s) ------------- Single step through program.
    step-instruction (alias: si)  Single step a single cpu instruction.
    stepout --------------------- Step out of the current function.
    thread (alias: tr) ---------- Switch to the specified thread.
    threads --------------------- Print out info for every traced thread.
    trace (alias: t) ------------ Set tracepoint.
    types ----------------------- Print list of types
    up -------------------------- Move the current frame up.
    vars ------------------------ Print package variables.
    whatis ---------------------- Prints type of an expression.

總結

到此這篇關于VSCode Golang dlv調試數據截?cái)鄦栴}及處理方法的文章就介紹到這了,更多相關VSCode Golang dlv調試數據截?cái)鄡?nèi)容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！