spring boot 配置動態刷新實現詳解
本文測試使用的spring cloud版本為:
Dalston.SR1
很多朋友只知道spring cloud config可以刷新遠程git的配置到內存中,
卻不知道spring cloud config的客戶端可以脫離服務端使用,
更不知道spring cloud config客戶端結合actuator還可以刷新本地的配置文件到內存中。
具體做法如下:
1、pom:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.liuyx</groupId>
<artifactId>test-config-refresh</artifactId>
<version>1.0-SNAPSHOT</version>
<parent>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-parent</artifactId>
<version>1.5.4.RELEASE</version>
<relativePath/> <!-- lookup parent from repository -->
</parent>
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-starter-config</artifactId>
</dependency>
<!--監控+refresh配置-->
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
</dependencies>
<dependencyManagement>
<dependencies>
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-dependencies</artifactId>
<version>Dalston.SR1</version>
<type>pom</type>
<scope>import</scope>
</dependency>
</dependencies>
</dependencyManagement>
</project>
單獨引入 spring-boot-starter-actuator或者spring-cloud-starter-config(spring cloud config的客戶端) 是不會暴露/refresh端點的,兩者同時引入之后才能暴露/refresh端點。
2、一般使用spring-cloud-starter-config的文章都會讓你在bootstrap里加上配置中心服務端的地址,這里我們要脫離配置中心服務端使用,所以這些配置完全不需要。
3、對需要刷新的屬性使用@Value注解,同時將類使用@RefreshScope注解進行標記,示例如下:
package com.liuyx.test;
import org.springframework.beans.factory.annotation.Value;
import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.cloud.context.config.annotation.RefreshScope;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;
@SpringBootApplication
@RestController
@RefreshScope
public class Main {
public static void main(String[] args) {
SpringApplication.run(Main.class);
}
private static int port;
@Value("${server.port}")
public void setPort(int port){
this.port=port;
}
@RequestMapping("/port")
public int port(){
return port;
}
}
這里我的變量是一個static變量,所以只能在非static的set方法上加@Value注解,而不是變量定義行的上方。如果不是靜態變量則可以直接寫作:
@Value("${server.port}")
private int port;
4、application.properties配置
server.port=80 local.test=hello1 management.security.enabled=false
5、測試
1、啟動項目,訪問 http://localhost/port 顯示 80
2、修改classpath(注意是classpath,即你編譯后的class文件所處的目錄)下的application.properties將server.port改為801

3、發送空post(注意是post)請求到 http://localhost:80/refresh

4、再次訪問 http://localhost/port 顯示 801 測試成功
最后的補充:
即使結合配置中心服務端使用,該方法也是有效的,所有有效位置的有效配置文件(如git上的,jar內的,jar外的)都會被掃描,并根據一定的順序進行覆蓋
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
Java基礎學習之ArrayList類概述與常用方法
這篇文章主要為大家簡單的介紹Java中ArrayList類的概述、常用方法及存儲字符串并遍歷,文中的示例代碼講解詳細,感興趣的小伙伴可以了解一下2022-08-08
Java日常練習題,每天進步一點點(30)
下面小編就為大家?guī)硪黄狫ava基礎的幾道練習題(分享)。小編覺得挺不錯的,現在就分享給大家,也給大家做個參考。一起跟隨小編過來看看吧,希望可以幫到你2021-07-07
Java多線程編程之使用Exchanger數據交換實例
這篇文章主要介紹了Java多線程編程之使用Exchanger數據交換實例,本文直接給出實例代碼,需要的朋友可以參考下2015-05-05
redis?redisTemplate數據類型基礎操作
這篇文章主要介紹了redis?redisTemplate數據類型基礎操作,具有很好的參考價值,希望對大家有所幫助。如有錯誤或未考慮完全的地方,望不吝賜教2023-06-06
Java調用參數類型是application/x-www-form-urlencoded的API問題
在使用Postman進行接口測試時,對于POST請求,需將請求頭設置為application/x-www-form-urlencoded,并將參數轉為String類型,通常在GET請求中,參數直接拼接在URL后,本文通過具體實例,詳細講解了參數處理的方法,適合API開發者參考2024-09-09

