Python 使用指定的網卡發送HTTP請求的實例
更新時間：2019年08月21日 15:36:57 作者：zhipeng-python
今天小編就為大家分享一篇Python 使用指定的網卡發送HTTP請求的實例，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧
需求: 一臺機器上有多個網卡, 如何訪問指定的 URL 時使用指定的網卡發送數據呢?
$ curl --interface eth0 www.baidu.com # curl interface 可以指定網卡
閱讀 urllib.py 的源碼, 追述到 open_http –> httplib.HTTP –> httplib.HTTP._connection_class = HTTPConnection
HTTPConnection 在創建的時候會指定一個 source_address.
HTTPConnection.connect 時調用 HTTPConnection._create_connection = socket.create_connection
# 先看一下本地網卡信息 $ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1<PERFORMNUD> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether c8:e0:eb:17:3a:73 inet6 fe80::cae0:ebff:fe17:3a73%en0 prefixlen 64 scopeid 0x4 inet 192.168.20.2 netmask 0xffffff00 broadcast 192.168.20.255 nd6 options=1<PERFORMNUD> media: autoselect status: active en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=4<VLAN_MTU> ether 0c:5b:8f:27:9a:64 inet6 fe80::e5b:8fff:fe27:9a64%en8 prefixlen 64 scopeid 0xa inet 192.168.8.100 netmask 0xffffff00 broadcast 192.168.8.255 nd6 options=1<PERFORMNUD> media: autoselect (100baseTX <full-duplex>) status: active
可以看到en0和en1, 這兩塊網卡都可以訪問公網. lo0是本地回環.
直接修改 socket.py 做測試.
def create_connection(address, timeout=_GLOBAL_DEFAULT_TIMEOUT,
source_address=None):
"""If *source_address* is set it must be a tuple of (host, port)
for the socket to bind as a source address before making the connection.
An host of '' or port 0 tells the OS to use the default.
source_address 如果設置, 必須是傳遞元組 (host, port), 默認是 ("", 0)
"""
host, port = address
err = None
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
af, socktype, proto, canonname, sa = res
sock = None
try:
sock = socket(af, socktype, proto)
# sock.bind(("192.168.20.2", 0)) # en0
# sock.bind(("192.168.8.100", 0)) # en1
# sock.bind(("127.0.0.1", 0)) # lo0
if timeout is not _GLOBAL_DEFAULT_TIMEOUT:
sock.settimeout(timeout)
if source_address:
print "socket bind source_address: %s" % source_address
sock.bind(source_address)
sock.connect(sa)
return sock
except error as _:
err = _
if sock is not None:
sock.close()
if err is not None:
raise err
else:
raise error("getaddrinfo returns an empty list")
參考說明文檔, 直接分三次綁定不通網卡的 IP 地址, 端口設置為0.
# 測試 en0
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
.148.245.16
# 測試 en1
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
.94.115.227
# 測試 lo0
$ python -c 'import urllib as u;print u.urlopen("http://ip.haschek.at").read()'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 87, in urlopen
return opener.open(url)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 213, in open
return getattr(self, name)(url)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 350, in open_http
h.endheaders(data)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 1049, in endheaders
self._send_output(message_body)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 893, in _send_output
self.send(msg)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 855, in send
self.connect()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 832, in connect
self.timeout, self.source_address)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/socket.py", line 578, in create_connection
raise err
IOError: [Errno socket error] [Errno 49] Can't assign requested address
測試通過, 說明在多網卡情況下, 創建 socket 時綁定某塊網卡的 IP 就可以, 端口需要設置為0. 如果端口不設置為0, 第二次請求時, 可以看到拋異常, 端口被占用.
Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 87, in urlopen return opener.open(url) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 213, in open return getattr(self, name)(url) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/urllib.py", line 350, in open_http h.endheaders(data) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 1049, in endheaders self._send_output(message_body) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 893, in _send_output self.send(msg) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 855, in send self.connect() File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/httplib.py", line 832, in connect self.timeout, self.source_address) File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/socket.py", line 577, in create_connection raise err IOError: [Errno socket error] [Errno 48] Address already in use
如果是在項目中, 只需要把 socket.create_connection 這個函數的形參 source_address 設置為對應網卡的 (IP, 0) 就可以.
# test-interface_urllib.py
import socket
import urllib, urllib2
_create_socket = socket.create_connection
SOURCE_ADDRESS = ("127.0.0.1", 0)
#SOURCE_ADDRESS = ("172.28.153.121", 0)
#SOURCE_ADDRESS = ("172.16.30.41", 0)
def create_connection(*args, **kwargs):
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
args = tuple(args)
in_args = True
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _create_socket(*args, **kwargs)
socket.create_connection = create_connection
print urllib.urlopen("http://ip.haschek.at").read()
通過測試, 可以發現已經可以通過制定的網卡發送數據, 并且 IP 地址對應網卡分配的 IP.
問題, 爬蟲經常使用 requests, requests 是否支持呢. 通過測試, 可以發現, requests 并沒有使用 python 內置的 socket 模塊.
看源碼, requests 是如果創建的 socket 連接呢. 方法和查看 urllib 創建socket 的方式一樣. 具體就不寫了.
因為我用的是 python 2.7, 所以可以定位到 requests 使用的 socket 模塊是 urllib3.utils.connection 的.
修改方法和 urllib 相差不大.
import urllib3.connection _create_socket = urllib3.connection.connection.create_connection # pass urllib3.connection.connection.create_connection = create_connection # pass
運行后, 可能會拋出異常. requests.exceptions.ConnectionError: Max retries exceeded with .. Invalid argument
這個異常不是每次出現, 跟 IP 段有關系, 跳轉遞歸層數太多導致, 只需要將 kwargs 中的 socket_options去掉即可. 127.0.0.1肯定會出異常.
import socket
import urllib
import urllib2
import urllib3.connection
import requests as req
_default_create_socket = socket.create_connection
_urllib3_create_socket = urllib3.connection.connection.create_connection
SOURCE_ADDRESS = ("127.0.0.1", 0)
#SOURCE_ADDRESS = ("172.28.153.121", 0)
#SOURCE_ADDRESS = ("172.16.30.41", 0)
def default_create_connection(*args, **kwargs):
try:
del kwargs["socket_options"]
except:
pass
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
args = tuple(args)
in_args = True
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _default_create_socket(*args, **kwargs)
def urllib3_create_connection(*args, **kwargs):
in_args = False
if len(args) >=3:
args = list(args)
args[2] = SOURCE_ADDRESS
in_args = True
args = tuple(args)
if not in_args:
kwargs["source_address"] = SOURCE_ADDRESS
print "args", args
print "kwargs", str(kwargs)
return _urllib3_create_socket(*args, **kwargs)
socket.create_connection = default_create_connection
# 因為偶爾會出問題, 所以使用默認的 socket.create_connection
# urllib3.connection.connection.create_connection = urllib3_create_connection
urllib3.connection.connection.create_connection = default_create_connection
print " *** test requests: " + req.get("http://ip.haschek.at").content
print " *** test urllib: " + urllib.urlopen("http://ip.haschek.at").read()
print " *** test urllib2: " + urllib2.urlopen("http://ip.haschek.at").read()
注意: 使用 urllib3.utils.connection 好像不起作用
稍微再完善一下, 就是把根據網卡名自動獲取 IP.
import subprocess
def get_all_net_devices():
sub = subprocess.Popen("ls /sys/class/net", shell=True, stdout=subprocess.PIPE)
sub.wait()
net_devices = sub.stdout.read().strip().splitlines()
# ['eth0', 'eth1', 'lo']
# 這里簡單過濾一下網卡名字, 根據需求改動
net_devices = [i for i in net_devices if "ppp" in i]
return net_devices
ALL_DEVICES = get_all_net_devices()
def get_local_ip(device_name):
sub = subprocess.Popen("/sbin/ifconfig en0 | grep '%s ' | awk '{print $2}'" % device_name, shell=True, stdout=subprocess.PIPE)
sub.wait()
ip = sub.stdout.read().strip()
return ip
def random_local_ip():
return get_local_ip(random.choice(ALL_DEVICES))
# code ...
只需要把 args[2] = SOURCE_ADDRESS 和 kwargs["source_address"] = SOURCE_ADDRESS改成 random_local_ip() 或者 get_local_ip("eth0")
至于有什么用途, 就全憑想象了.
以上這篇Python 使用指定的網卡發送HTTP請求的實例就是小編分享給大家的全部內容了，希望能給大家一個參考，也希望大家多多支持腳本之家。
相關文章
Pytorch通過保存為ONNX模型轉TensorRT5的實現
這篇文章主要介紹了Pytorch通過保存為ONNX模型轉TensorRT5的實現，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧2020-05-05
這篇文章主要介紹了Python繪制3d螺旋曲線圖實例代碼，具有一定借鑒價值，需要的朋友可以參考下。2017-12-12
基于Python-Pycharm實現的猴子摘桃小游戲(源代碼)
這篇文章主要介紹了基于Python-Pycharm實現的猴子摘桃小游戲,本文通過實例代碼給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2021-02-02
利用pandas如何實現類似sql中的left join操作
這篇文章主要介紹了利用pandas如何實現類似sql中的left join操作，具有很好的參考價值，希望對大家有所幫助。如有錯誤或未考慮完全的地方，望不吝賜教2023-06-06
這篇文章主要為大家詳細介紹了python利用tkinter實現屏保，具有一定的參考價值，感興趣的小伙伴們可以參考一下2019-07-07
Scrapy的Pipeline之處理CPU密集型或阻塞型操作詳解
這篇文章主要介紹了Scrapy的Pipeline之處理CPU密集型或阻塞型操作詳解,Twisted框架的reactor適合于處理短的、非阻塞的操作,Twisted提供了線程池來在其他的線程而不是主線程(Twisted的reactor線程)中執行慢的操作,需要的朋友可以參考下2023-10-10
Python采集C站熱榜數據實戰示例
這篇文章主要為大家介紹了Python采集C站熱榜數據實戰示例詳解，有需要的朋友可以借鑒參考下，希望能夠有所幫助，祝大家多多進步，早日升職加薪2023-05-05
這篇文章主要想來和大家一起探索一下Python條件語句的奇妙世界——解密邏輯與控制流，文中的示例代碼講解詳細，感興趣的小伙伴可以學習一下2023-07-07
python tkiner實現 一個小小的圖片翻頁功能的示例代碼
這篇文章主要介紹了python tkiner實現 一個小小的圖片翻頁功能,需要的朋友可以參考下2020-06-06
2023巨詳細的Python安裝庫教程(以pycharm和Anaconda安裝pygame為例)
這篇文章主要給大家介紹了巨詳細的Python安裝庫教程,文中以pycharm和Anaconda安裝pygame為例,通過圖文介紹的非常詳細,需要的朋友可以參考下2024-01-01