CentOS7下GitLab跨大版本升級的方法
更新時間：2019年07月22日 10:24:46 作者：love8753
這篇文章主要介紹了CentOS7下GitLab跨大版本升級的方法，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
備份&升級
在升級前一定要做好備份，記錄自己當前gitlab-ca的版本號。
查看當前gitlab版本號
[root@localhost ~]# yum list | grep gitlab-ce gitlab-ce.x86_64 9.3.6-ce.0.el7 installed
備份文件
[root@localhost ~]# gitlab-rake gitlab:backup:create Dumping database ... Dumping PostgreSQL database gitlabhq_production ... [DONE] done Dumping repositories ... * dev/dubbo ... [DONE] * dev/dubbo.wiki ... [SKIPPED] * dev/dubbox-master ... [DONE] * dev/dubbox-master.wiki ... [SKIPPED] * MobileTerminal/MobileDoc ... [SKIPPED] * MobileTerminal/MobileDoc.wiki ... [SKIPPED] * TrakCare/Doc ... [SKIPPED] * TrakCare/Doc.wiki ... [SKIPPED] * PerationMaintenance/PMDoc ... [DONE] * PerationMaintenance/PMDoc.wiki ... [DONE] * doc/his ... [DONE] * doc/his.wiki ... [SKIPPED] * PerationMaintenance/image ... [SKIPPED] * PerationMaintenance/image.wiki ... [SKIPPED] done Dumping uploads ... done Dumping builds ... done Dumping artifacts ... done Dumping pages ... done Dumping lfs objects ... done Dumping container registry images ... [DISABLED] Creating backup archive: 1552552057_2019_03_14_9.3.6_gitlab_backup.tar ... done Uploading backup archive to remote storage ... skipped Deleting tmp directories ... done done done done done done done done Deleting old backups ... skipping
在目錄/var/opt/gitlab/backups/下會生成一個備份文件如：1552552057_gitlab_backup.tar，其中1552552057即為此次備份都版本號。
還原備份（失?。?/strong>
gitlab-rake gitlab:backup:restore BACKUP=備份版本號
配置gitlab-yum源
[root@localhost ~]# cat << EOF > /etc/yum.repos.d/gitlab-ce.repo > [gitlab-ce] > name=gitlab-ce > baseurl=https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/ > repo_gpgcheck=0 > gpgcheck=0 > enable=1 > gpgkey=https://packages.gitlab.com/gpg.key > EOF
yum install安裝
[root@localhost ~]# yum install gitlab-ce-9.5.9
已加載插件：fastestmirror, langpacks
gitlab-ce | 2.9 kB 00:00:00
gitlab-ce/primary_db | 2.7 MB 00:00:01
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
正在解決依賴關系
--> 正在檢查事務
---> 軟件包 gitlab-ce.x86_64.0.9.3.6-ce.0.el7 將被 升級
---> 軟件包 gitlab-ce.x86_64.0.9.5.9-ce.0.el7 將被 更新
--> 解決依賴關系完成
依賴關系解決
===============================================================================================================================================================================================================================================================
Package 架構 版本 源 大小
===============================================================================================================================================================================================================================================================
正在更新:
gitlab-ce x86_64 9.5.9-ce.0.el7 gitlab-ce 381 M
事務概要
===============================================================================================================================================================================================================================================================
升級 1 軟件包
總下載量：381 M
Is this ok [y/d/N]: Y
Downloading packages:
No Presto metadata available for gitlab-ce
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 18% [==================- ] 659 B/s | 70 MB 137:35:05 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 21% [====================== ] 646 B/s | 83 MB 134:19:56 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_6 FAILED 81% [===================================================================================- ] 411 B/s | 311 MB 50:00:08 ETA
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: [Errno 12] Timeout on https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
正在嘗試其它鏡像。
gitlab-ce-9.5.9-ce.0.el7.x86_64.rpm | 381 MB 00:01:52
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
gitlab preinstall: Automatically backing up only the GitLab SQL database (excluding everything else!)
Dumping database ...
Dumping PostgreSQL database gitlabhq_production ... [DONE]
done
Dumping repositories ...
[SKIPPED]
Dumping uploads ...
[SKIPPED]
Dumping builds ...
[SKIPPED]
Dumping artifacts ...
[SKIPPED]
Dumping pages ...
[SKIPPED]
Dumping lfs objects ...
[SKIPPED]
Dumping container registry images ...
[DISABLED]
Creating backup archive: 1552553362_2019_03_14_9.3.6_gitlab_backup.tar ... done
Uploading backup archive to remote storage ... skipped
Deleting tmp directories ... done
done
Deleting old backups ... skipping
正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 [############################################################################################################################ ] 1/2 正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 [############################################################################################################################## 正在更新 : gitlab-ce-9.5.9-ce.0.el7.x86_64 1/2
*. *.
*** ***
***** *****
.****** *******
******** ********
,,,,,,,,,***********,,,,,,,,,
,,,,,,,,,,,*********,,,,,,,,,,,
.,,,,,,,,,,,*******,,,,,,,,,,,,
,,,,,,,,,*****,,,,,,,,,.
,,,,,,,****,,,,,,
.,,,***,,,,
,*,.
_______ __ __ __
/ ____(_) /_/ / ____ _/ /_
/ / __/ / __/ / / __ `/ __ \
/ /_/ / / /_/ /___/ /_/ / /_/ /
\____/_/\__/_____/\__,_/_.___/
gitlab: Thank you for installing GitLab!
gitlab: To configure and start GitLab, RUN THE FOLLOWING COMMAND:
sudo gitlab-ctl reconfigure
gitlab: GitLab should be reachable at http://192.168.x.x:8090/gitlab
gitlab: Otherwise configure GitLab for your system by editing /etc/gitlab/gitlab.rb file
gitlab: And running reconfigure again.
gitlab:
gitlab: For a comprehensive list of configuration options please see the Omnibus GitLab readme
gitlab: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md
gitlab:
清理 : gitlab-ce-9.3.6-ce.0.el7.x86_64 2/2
Checking PostgreSQL executables: OK
Shutting down all GitLab services except those needed for migrations
ok: down: gitaly: 1s, normally up
ok: down: gitlab-monitor: 0s, normally up
ok: down: gitlab-workhorse: 1s, normally up
ok: down: logrotate: 0s, normally up
ok: down: nginx: 1s, normally up
ok: down: node-exporter: 0s, normally up
ok: down: postgres-exporter: 0s, normally up
ok: down: postgresql: 0s, normally up
ok: down: prometheus: 0s, normally up
ok: down: redis: 1s, normally up
ok: down: redis-exporter: 0s, normally up
ok: down: sidekiq: 0s, normally up
ok: down: unicorn: 0s, normally up
ok: run: postgresql: (pid 3362) 1s
ok: run: redis: (pid 3370) 0s
run: postgresql: (pid 3362) 1s; run: log: (pid 866) 3488369s
run: redis: (pid 3370) 0s; run: log: (pid 897) 3488369s
Reconfiguring GitLab to apply migrations
* Moving existing certificates found in /opt/gitlab/embedded/ssl/certs
* Symlinking existing certificates found in /etc/gitlab/trusted-certs
gitlab Reconfigured!
Checking for an omnibus managed postgresql: OK
Checking if we already upgraded: OK
The latest version 9.6.3 is already running, nothing to do
Ensuring PostgreSQL is updated: OK
Restarting previously running GitLab services
ok: run: gitaly: (pid 4046) 2s
ok: run: gitlab-monitor: (pid 4086) 1s
ok: run: gitlab-workhorse: (pid 4068) 2s
ok: run: logrotate: (pid 4120) 1s
ok: run: nginx: (pid 4126) 0s
ok: run: node-exporter: (pid 4177) 0s
ok: run: postgres-exporter: (pid 4184) 1s
ok: run: postgresql: (pid 3362) 72s
ok: run: prometheus: (pid 4094) 3s
ok: run: redis: (pid 3370) 71s
ok: run: redis-exporter: (pid 4194) 0s
ok: run: sidekiq: (pid 4203) 1s
ok: run: unicorn: (pid 4216) 0s
Upgrade complete! If your GitLab server is misbehaving try running
sudo gitlab-ctl restart
before anything else. If you need to roll back to the previous version you can
use the database backup made during the upgrade (scroll up for the filename).
驗證中 : gitlab-ce-9.5.9-ce.0.el7.x86_64 1/2
驗證中 : gitlab-ce-9.3.6-ce.0.el7.x86_64 2/2
更新完畢:
gitlab-ce.x86_64 0:9.5.9-ce.0.el7
完畢！
升級Gitlab（注意：由于升級不能跨越大版本號，因此只能升級到當前大版本號到最高版本，方可升級到下一個大版本號）
[root@localhost ~]# cd /var/opt/gitlab/backups/ [root@localhost backups]# ll 總用量 6532 -rw-------. 1 git git 6625280 3月 14 16:27 1552552057_2019_03_14_9.3.6_gitlab_backup.tar -rw-------. 1 git git 61440 3月 14 16:49 1552553362_2019_03_14_9.3.6_gitlab_backup.tar 16:27 生成的tar包是我手動執行備份命令生成 16:49 生成的tar包是yum更新版本自動備份
依次執行下面指令逐步升級，在每一步安裝成功后如果發現界面500，不可訪問，那么執行g(shù)itlab-ctl reconfigure指令刷新配置文件。（一定保證數據可以正常訪問方可執行下一步升級指令）
yum install gitlab-ce-8.17.8-ce.0.el7 yum install gitlab-ce-9.5.9-ce.0.el7 yum install gitlab-ce-10.0.0-ce.0.el7 yum install gitlab-ce-10.8.0-ce.0.el7 yum install gitlab-ce-11.3.0-ce.0.el7
查看當前版本號
[root@localhost backups]# cat /opt/gitlab/embedded/service/gitlab-rails/VERSION 9.5.9
FAQ
[ERROR] OpenSSL::Cipher::CipherError (bad decrypt):
gitlab-rails runner "Project.where.not(import_url: nil).each { |p| p.import_data.destroy if p.import_data }"
[ERROR] Error executing action `run` on resource 'ruby_block[directory resource: /var/opt/gitlab/git-data/repositories]'
chmod -R 2770 /var/opt/gitlab/git-data
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
jmeter在linux系統下運行及本地內存調優的方法詳解
這篇文章主要介紹了jmeter在linux系統下運行及本地內存調優的方法,本文通過圖文并茂的形式給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-07-07
如何關閉http Methods中的Trace 提高安全意識
在配置文件http.conf 添加 TraceEnable off 即可關閉2013-02-02
Linux環境下Apache服務器配置二級域名的方法詳解
這篇文章主要介紹了Linux環境下Apache服務器配置二級域名的方法,結合具體實例形式較為詳細的分析了Linux環境下Apache服務器配置二級域名的具體步驟與相關操作技巧,需要的朋友可以參考下2019-07-07
這篇文章主要給大家介紹了關于Linux中利用grep命令如何檢索文件內容的相關資料，并且給大家簡單介紹了關于Linux grep和find的區別，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面來一起看看吧。2017-11-11
如何監控 Linux 服務器狀態的方法
這篇文章主要介紹了如何監控 Linux 服務器狀態的方法,本文給大家介紹的非常詳細，對大家的學習或工作具有一定的參考借鑒價值，需要的朋友可以參考下2020-06-06
大家好，本篇文章主要講的是linux系統文件共享samba配置教程，感興趣的同學趕快來看一看吧，對你有幫助的話記得收藏一下，方便下次瀏覽2021-12-12
免費常用Linux VPS管理面板/一鍵包介紹和安裝方法
這篇文章主要介紹了常用免費Linux VPS管理面板/一鍵包介紹和安裝方法,需要的朋友可以參考下2017-02-02
使用Apache?Camel表達REST服務的方法
Apache Camel可以作為一個獨立的或嵌入的庫在任何地方運行，它可以幫助整合，這篇文章主要介紹了如何使用Apache?Camel表達REST服務,需要的朋友可以參考下2022-06-06
Centos 6.9環境下創建用戶及刪除用戶的方法
這篇文章主要介紹了Centos 6.9環境下創建用戶及刪除用戶的方法,結合實例形式分析了Centos 6.9創建用戶及刪除用戶相關的用戶名、密碼創建、刪除及權限設置等相關命令使用方法,需要的朋友可以參考下2018-04-04
linux下搭建scala環境并寫個簡單的scala程序
今天小編就為大家分享一篇關于linux下搭建scala環境并寫個簡單的scala程序，小編覺得內容挺不錯的，現在分享給大家，具有很好的參考價值，需要的朋友一起跟隨小編來看看吧2019-04-04