詳解php+nginx 服務發生500 502錯誤排查思路
更新時間：2019年07月19日 11:39:28 作者：小小的太陽
這篇文章主要介紹了詳解php+nginx 服務發生500 502錯誤排查思路，文中通過示例代碼介紹的非常詳細，對大家的學習或者工作具有一定的參考學習價值，需要的朋友們下面隨著小編來一起學習學習吧
概述
當線上的服務中訪問中出現500或者502錯誤時，需要緊急處理，排查問題，該怎么做？可以通過分析一些錯誤日志或者跟蹤php-fpm進程來進行問題定位。
nginx error_log
nginx的error_log在nginx的配置文件中定義的
server {
listen 80;
server_name localhost;
root /var/www;
access_log /Users/jiao/logs/default.access.log;
error_log /Users/jiao/logs/default.error.log;
location / {
index index.html index.htm index.php;
autoindex on;
}
location = /info {
allow 127.0.0.1;
deny all;
rewrite (.*) /.info.php;
}
location ~ \.php$ {
root /var/www;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /var/www$fastcgi_script_name;
include /usr/local/etc/nginx/fastcgi_params;
}
}
查看error_log
➜ tail /Users/jiao/logs/default.error.log
2019/07/17 11:08:18 [error] 77416#0: *76 kevent() reported about an closed connection (54: Connection reset by peer) while reading response header from upstream, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "localhost"
發現出現了Connection reset by peer，連接被重置了，此時可以再查看php-fpm的error_log進一步分析問題
php-fpm error_log
php-fpm的error_log在php-fpm.conf文件中配置中定義的
; Error log file ; If it's set to "syslog", log is sent to syslogd instead of being written ; in a local file. ; Note: the default prefix is /usr/local/var ; Default Value: log/php-fpm.log error_log = log/php-fpm.log
error_log里面的內容是這樣的
➜ tail /usr/local/var/log/php-fpm.log [17-Jul-2019 10:49:54] NOTICE: [pool www] child 81948 started [17-Jul-2019 11:08:18] WARNING: [pool www] child 77537, script '/var/www/index.php' (request: "GET /index.php") execution timed out (3.801267 sec), terminating [17-Jul-2019 11:08:18] WARNING: [pool www] child 77537 exited on signal 15 (SIGTERM) after 1503.113967 seconds from start [17-Jul-2019 11:08:18] NOTICE: [pool www] child 94339 started
可以看到是請求/var/www/index.php文件出現了超時
dtruss
dtruss是動態跟蹤命令，可以根據PID，name跟蹤進程
mac環境下使用dtruss，linux環境可以使用strace，pstack
➜ dtruss
USAGE: dtruss [-acdefholLs] [-t syscall] { -p PID | -n name | command | -W name }
-p PID # examine this PID -n name # examine this process name -t syscall # examine this syscall only -W name # wait for a process matching this name -a # print all details -c # print syscall counts -d # print relative times (us) -e # print elapsed times (us) -f # follow children -l # force printing pid/lwpid -o # print on cpu times -s # print stack backtraces -L # don't print pid/lwpid -b bufsize # dynamic variable buf size
eg,
dtruss df -h # run and examine "df -h" dtruss -p 1871 # examine PID 1871 dtruss -n tar # examine all processes called "tar" dtruss -f test.sh # run test.sh and follow children
跟蹤php-fpm：sudo dtruss -a -n php-fpm
此時訪問web頁面，就可以看到跟蹤內容
21416/0x3479b6: 1559 63 3 getrusage(0x0, 0x7FFEE1EC0760, 0x0) = 0 0
21416/0x3479b6: 1561 4 0 getrusage(0xFFFFFFFFFFFFFFFF, 0x7FFEE1EC0760, 0x0) = 0 0
21416/0x3479b6: 1627 77 17 poll(0x7FFEE1EC08C0, 0x1, 0x1388) = 1 0
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
21416/0x3479b6: 1872 29 24 lstat64("/var/www/index.php\0", 0x7FFEE1ECFF38, 0x0) = 0 0
21416/0x3479b6: 1884 9 6 lstat64("/var/www\0", 0x7FFEE1ECFDF8, 0x0) = 0 0
21416/0x3479b6: 1889 6 3 lstat64("/var\0", 0x7FFEE1ECFCB8, 0x0) = 0 0
21416/0x3479b6: 1899 12 8 readlink("/var\0", 0x7FFEE1ED0090, 0x400) = 11 0
21416/0x3479b6: 1905 6 4 lstat64("/private/var\0", 0x7FFEE1ECFB78, 0x0) = 0 0
21416/0x3479b6: 1917 6 3 lstat64("/private\0", 0x7FFEE1ECFA38, 0x0) = 0 0
21416/0x3479b6: 2178 18 14 stat64("/var/www/.user.ini\0", 0x7FFEE1ED0240, 0x0) = -1 Err#2
21416/0x3479b6: 2217 5 1 setitimer(0x2, 0x7FFEE1ED07E0, 0x0) = 0 0
21416/0x3479b6: 2225 4 0 sigaction(0x1B, 0x7FFEE1ED0788, 0x7FFEE1ED07B0) = 0 0
21416/0x3479b6: 2237 5 1 sigprocmask(0x2, 0x7FFEE1ED0804, 0x0) = 0x0 0
21416/0x3479b6: 3643 48 40 open_nocancel(".\0", 0x0, 0x1) = 5 0
21416/0x3479b6: 3648 7 3 fstat64(0x5, 0x7FFEE1ED0110, 0x0) = 0 0
21416/0x3479b6: 3653 7 2 fcntl_nocancel(0x5, 0x32, 0x10F252158) = 0 0
21416/0x3479b6: 3661 12 7 close_nocancel(0x5) = 0 0
21416/0x3479b6: 3670 10 7 stat64("/usr/local/var\0", 0x7FFEE1ED0080, 0x0) = 0 0
21416/0x3479b6: 3681 11 8 chdir("/var/www\0", 0x0, 0x0) = 0 0
21416/0x3479b6: 3698 4 0 setitimer(0x2, 0x7FFEE1ED02D0, 0x0) = 0 0
21416/0x3479b6: 3710 6 3 fcntl(0x3, 0x8, 0x10F3FD858) = 0 0
21416/0x3479b6: 3733 9 6 stat64("/private/var/www/index.php\0", 0x7FFEE1ECFF10, 0x0) = 0 0
74904/0x332630: 723125 1073381 19 kevent(0x9, 0x0, 0x0) = 0 0
74902/0x332629: 770666 1073387 17 kevent(0x8, 0x0, 0x0) = 0 0
74904/0x332630: 723165 1061954 20 kevent(0x9, 0x0, 0x0) = 0 0
74902/0x332629: 770709 1061954 20 kevent(0x8, 0x0, 0x0) = 0 0
74904/0x332630: 723201 1074786 16 kevent(0x9, 0x0, 0x0) = 0 0
74902/0x332629: 770747 1074783 16 kevent(0x8, 0x0, 0x0) = 0 0
74904/0x332630: 723229 1069141 13 kevent(0x9, 0x0, 0x0) = 0 0
74902/0x332629: 770777 1069145 11 kevent(0x8, 0x0, 0x0) = 0 0
21416/0x3479b6: 3942 3902233 7 __semwait_signal(0x703, 0x0, 0x1) = -1 Err#4
74902/0x332629: 770814 103 25 kill(21416, 15) = 0 0
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 771325 7 2 sigreturn(0x7FFEE1ECFC40, 0x1E, 0xC1A4B78E0404663A) = 0 Err#-2
74902/0x332629: 771336 7 3 kevent(0x8, 0x0, 0x0) = 1 0
dtrace: error on enabled probe ID 2174 (ID 159: syscall::read:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 771352 11 7 wait4(0xFFFFFFFFFFFFFFFF, 0x7FFEE1ED0748, 0x3) = 21416 0
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 773511 1957 1899 fork() = 28060 0
28060/0x3754c5: 125: 0: 0 fork() = 0 0
28060/0x3754c5: 128 9 2 bsdthread_register(0x7FFF6774C418, 0x7FFF6774C408, 0x2000) = -1 Err#22
dtrace: error on enabled probe ID 2172 (ID 161: syscall::write:return): invalid kernel access in action #13 at DIF offset 68
74902/0x332629: 773737 4 1 wait4(0xFFFFFFFFFFFFFFFF, 0x7FFEE1ED0748, 0x3) = 0 0
74902/0x332629: 773742 6 3 read(0x5, "\0", 0x1) = -1 Err#35
28060/0x3754c5: 320 4 0 getpid(0x0, 0x0, 0x0) = 28060 0
28060/0x3754c5: 328 7 2 __mac_syscall(0x7FFF67758A17, 0x4, 0x7FFEE1ED0208) = -1 Err#45
28060/0x3754c5: 332 5 2 csops(0x6D9C, 0xB, 0x7FFEE1ED0248) = -1 Err#22
28060/0x3754c5: 755 14 11 dup2(0x1, 0x2, 0x0) = 2 0
28060/0x3754c5: 797 89 22 close(0x4) = 0 0
28060/0x3754c5: 806 11 6 dup2(0x7, 0x0, 0x0) = 0 0
28060/0x3754c5: 817 4 0 geteuid(0x0, 0x0, 0x0) = 501 0
28060/0x3754c5: 820 3 0 close(0x5) = 0 0
28060/0x3754c5: 821 3 0 close(0x6) = 0 0
28060/0x3754c5: 824 5 1 sigaction(0xF, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 825 3 0 sigaction(0x2, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 827 3 0 sigaction(0x1E, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 828 3 0 sigaction(0x1F, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 829 3 0 sigaction(0x14, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 830 3 0 sigaction(0x3, 0x7FFEE1ED0688, 0x0) = 0 0
28060/0x3754c5: 1043 3 0 close(0x7) = 0 0
可以看到系統底層執行的函數，如lstat64獲取文件內容信息，kill(21416, 15)kill掉php-fpm進程，fork()出新的php-fpm進程，有興趣可以深入研究每個指令的作用
參考
http://www.dhdzp.com/article/165773.htm
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
相關文章
本文主要介紹了Nginx多虛擬主機配置小結2024-05-05
當Nginx所在服務器的磁盤空間滿時的影響以及如何避免這一問題
Nginx所在服務器的磁盤空間滿了,會導致日志無法寫入、緩存失效、反向代理請求異常等問題,嚴重時可能導致服務不可用,這篇文章主要介紹了當Nginx所在服務器的磁盤空間滿時的影響以及如何避免這一問題,需要的朋友可以參考下2024-12-12
這篇文章主要介紹了使用Nginx實現HTTPS雙向驗證的方法,涉及到單向驗證和雙向驗證的區別介紹，本文介紹的非常詳細，具有參考借鑒價值，感興趣的朋友一起學習吧2016-06-06![nginx: [warn]](http://img.jbzj.com/images/xgimg/bcimg3.png)
nginx: [warn] "log_format" directive used only on "http" lev
這篇文章主要介紹了nginx: [warn] "log_format" directive used only on "http" level 解決方法,需要的朋友可以參考下2014-08-08
Linux下Nginx負載均衡多個tomcat配置的方法步驟
這篇文章主要介紹了Linux下Nginx負載均衡多個tomcat配置的方法步驟，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧2019-04-04
Nginx中404頁面的配置及AJAX請求返回404頁面的方法
404是請求頁面不存在的錯誤代碼,在Nginx中有時處理jQuery中的ajax方法雖然能返回404頁面但錯誤代碼卻返回200,針對此問題我們具體來看一下Nginx中404頁面的配置及AJAX請求返回404頁面的方法2016-05-05
這篇文章主要介紹了Windows下Nginx的配置及配置文件部分介紹,非常不錯，具有參考借鑒價值，需要的朋友可以參考下2017-03-03
本文主要介紹了nginx設置攔截請求的幾種方法2024-05-05
keepalived+nginx實現雙服務器主備方案
本文主要介紹了使用keepalived和nginx實現雙服務器主備方案,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友們下面隨著小編來一起學習學習吧2024-12-12
這篇文章主要介紹了Nginx服務器Nginx.com配置文件詳解的相關資料,本文介紹的非常詳細，具有參考借鑒價值，需要的朋友可以參考下2016-09-09