了解JAVA并發工具常用設計套路
前言
在學習JAVA并發工具時,分析JUC下的源碼,發現有三個利器:狀態、隊列、CAS。
狀態
一般是state屬性,如AQS源碼中的狀態,是整個工具的核心,一般操作的執行都要看當前狀態是什么,
由于狀態是多線程共享的,所以都是volatile修飾,保證線程直接內存可見。
/** * AbstractQueuedSynchronizer中的狀態 */ private volatile int state; /** * Status field, taking on only the values: * SIGNAL: The successor of this node is (or will soon be) * blocked (via park), so the current node must * unpark its successor when it releases or * cancels. To avoid races, acquire methods must * first indicate they need a signal, * then retry the atomic acquire, and then, * on failure, block. * CANCELLED: This node is cancelled due to timeout or interrupt. * Nodes never leave this state. In particular, * a thread with cancelled node never again blocks. * CONDITION: This node is currently on a condition queue. * It will not be used as a sync queue node * until transferred, at which time the status * will be set to 0. (Use of this value here has * nothing to do with the other uses of the * field, but simplifies mechanics.) * PROPAGATE: A releaseShared should be propagated to other * nodes. This is set (for head node only) in * doReleaseShared to ensure propagation * continues, even if other operations have * since intervened. * 0: None of the above * * The values are arranged numerically to simplify use. * Non-negative values mean that a node doesn't need to * signal. So, most code doesn't need to check for particular * values, just for sign. * * The field is initialized to 0 for normal sync nodes, and * CONDITION for condition nodes. It is modified using CAS * (or when possible, unconditional volatile writes). */ volatile int waitStatus;
隊列
隊列一般由鏈表實現(單向鏈表,雙向鏈表),在線程獲取不到想要的資源或者狀態時,將線程封裝成特定節點,扔到等待隊列中,等待時機成熟,再從隊列中取出,是悲觀鎖思想。
如AQS中的Node節點,代碼太長就不貼了。
CAS
CAS操作是樂觀鎖思想,是輕量級的并發處理。一般用于對上述狀態的修改,而且能保證有且只有一個線程能修改這個狀態。
一般由Unsafe類中的compareAndSwap之類的方法實現。使用CAS,往往伴隨自旋,如果修改狀態失敗,則不斷地重試,直到修改狀態成功。
以上就是java并發編程中的套路,抓住這個思路,想必能在學習中有所幫助。
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
相關文章
SpringMVC中MultipartFile上傳獲取圖片的寬度和高度詳解
本篇文章主要介紹了SpringMVC中MultipartFile上傳獲取圖片的寬度和高度,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-05-05
SpringBoot?+?Disruptor實現特快高并發處理及使用Disruptor高速實現隊列的過程
Disruptor是一個開源的Java框架,它被設計用于在生產者—消費者(producer-consumer problem,簡稱PCP)問題上獲得盡量高的吞吐量(TPS)和盡量低的延遲,這篇文章主要介紹了SpringBoot?+?Disruptor?實現特快高并發處理,使用Disruptor高速實現隊列,需要的朋友可以參考下2023-11-11
SpringBoot 動態配置郵箱發件人過程解析
這篇文章主要介紹了SpringBoot 動態配置郵箱發件人過程解析,文中通過示例代碼介紹的非常詳細,對大家的學習或者工作具有一定的參考學習價值,需要的朋友可以參考下2019-08-08
servlet基礎知識_動力節點Java學院整理
這篇文章主要為大家詳細介紹了servlet基礎的相關資料,具有一定的參考價值,感興趣的小伙伴們可以參考一下2017-07-07
Java Spring分別實現定時任務方法
這篇文章主要為大家詳細介紹了Java與Spring設置動態定時任務的方法,定時任務的應用場景十分廣泛,如定時清理文件、定時生成報表、定時數據同步備份等2022-07-07

