淺析vue-router原理
近期被問到一個問題,在你們項目中使用的是Vue的SPA(單頁面)還是Vue的多頁面設計?
這篇文章主要圍繞Vue的SPA單頁面設計展開。 關于如何展開Vue多頁面設計請點擊查看。
vue-router是什么?
首先我們需要知道vue-router是什么,它是干什么的?
這里指的路由并不是指我們平時所說的硬件路由器,這里的路由就是SPA(單頁應用)的路徑管理器。 換句話說,vue-router就是WebApp的鏈接路徑管理系統。
vue-router是Vue.js官方的路由插件,它和vue.js是深度集成的,適合用于構建單頁面應用。
那與傳統的頁面跳轉有什么區別呢?
1.vue的單頁面應用是基于路由和組件的,路由用于設定訪問路徑,并將路徑和組件映射起來。
2.傳統的頁面應用,是用一些超鏈接來實現頁面切換和跳轉的。
在vue-router單頁面應用中,則是路徑之間的切換,也就是組件的切換。路由模塊的本質 就是建立起url和頁面之間的映射關系。
至于為啥不能用a標簽,這是因為用Vue做的都是單頁應用,就相當于只有一個主的index.html頁面,所以你寫的標簽是不起作用的,必須使用vue-router來進行管理。
vue-router實現原理
SPA(single page application):單一頁面應用程序,有且只有一個完整的頁面;當它在加載頁面的時候,不會加載整個頁面的內容,而只更新某個指定的容器中內容。
單頁面應用(SPA)的核心之一是:
1.更新視圖而不重新請求頁面;
2.vue-router在實現單頁面前端路由時,提供了三種方式:Hash模式、History模式、abstract模式,根據mode參數來決定采用哪一種方式。
路由模式
vue-router 提供了三種運行模式:
● hash: 使用 URL hash 值來作路由。默認模式。
● history: 依賴 HTML5 History API 和服務器配置。查看 HTML5 History 模式。
● abstract: 支持所有 JavaScript 運行環境,如 Node.js 服務器端。
Hash模式
vue-router 默認模式是 hash 模式 —— 使用 URL 的 hash 來模擬一個完整的 URL,當 URL 改變時,頁面不會去重新加載。
hash(#)是URL 的錨點,代表的是網頁中的一個位置,單單改變#后的部分(/#/..),瀏覽器只會加載相應位置的內容,不會重新加載網頁,也就是說 #是用來指導瀏覽器動作的,對服務器端完全無用,HTTP請求中不包括#;同時每一次改變#后的部分,都會在瀏覽器的訪問歷史中增加一個記錄,使用”后退”按鈕,就可以回到上一個位置; 所以說Hash模式通過錨點值的改變,根據不同的值,渲染指定DOM位置的不同數據 。
History模式
HTML5 History API提供了一種功能,能讓開發人員在不刷新整個頁面的情況下修改站點的URL,就是利用 history.pushState API 來完成 URL 跳轉而無須重新加載頁面;
由于hash模式會在url中自帶#,如果不想要很丑的 hash,我們可以用路由的 history 模式,只需要在配置路由規則時,加入"mode: 'history'",這種模式充分利用 history.pushState API 來完成 URL 跳轉而無須重新加載頁面。
//main.js文件中
const router = new VueRouter({
mode: 'history',
routes: [...]
})
當使用 history 模式時,URL 就像正常的 url,例如 yoursite.com/user/id,比較好… 不過這種模式要玩好,還需要后臺配置支持。因為我們的應用是個單頁客戶端應用,如果后臺沒有正確的配置,當用戶在瀏覽器直接訪問
所以呢,你要在服務端增加一個覆蓋所有情況的候選資源:如果 URL 匹配不到任何靜態資源,則應該返回同一個 index.html 頁面,這個頁面就是你 app 依賴的頁面。
export const routes = [
{path: "/", name: "homeLink", component:Home}
{path: "/register", name: "registerLink", component: Register},
{path: "/login", name: "loginLink", component: Login},
{path: "*", redirect: "/"}]
此處就設置如果URL輸入錯誤或者是URL 匹配不到任何靜態資源,就自動跳到到Home頁面。
abstract模式
abstract模式是使用一個不依賴于瀏覽器的瀏覽歷史虛擬管理后端。
根據平臺差異可以看出,在 Weex 環境中只支持使用 abstract 模式。 不過,vue-router 自身會對環境做校驗,如果發現沒有瀏覽器的 API,vue-router 會自動強制進入 abstract 模式,所以 在使用 vue-router 時只要不寫 mode 配置即可,默認會在瀏覽器環境中使用 hash 模式,在移動端原生環境中使用 abstract 模式。 (當然,你也可以明確指定在所有情況下都使用 abstract 模式)
vue-router使用方式
1:下載npm i vue-router -S
**2:在main.js中引入 ** import VueRouter from 'vue-router';
3:安裝插件Vue.use(VueRouter);
4:創建路由對象并配置路由規則
let router = new VueRouter({routes:[{path:'/home',component:Home}]});
5:將其路由對象傳遞給Vue的實例,options中加入 router:router
6:在app.vue中留坑
<router-view></router-view>
具體實現請看如下代碼:
//main.js文件中引入
import Vue from 'vue';
import VueRouter from 'vue-router';
//主體
import App from './components/app.vue';
import index from './components/index.vue'
//安裝插件
Vue.use(VueRouter); //掛載屬性
//創建路由對象并配置路由規則
let router = new VueRouter({
routes: [
//一個個對象
{ path: '/index', component: index }
]
});
//new Vue 啟動
new Vue({
el: '#app',
//讓vue知道我們的路由規則
router: router, //可以簡寫router
render: c => c(App),
})
最后記得在在app.vue中“留坑”
//app.vue中
<template>
<div>
<!-- 留坑,非常重要 -->
<router-view></router-view>
</div>
</template>
<script>
export default {
data(){
return {}
}
}
</script>
vue-router源碼分析
我們先來看看vue的實現路徑。

在入口文件中需要實例化一個 VueRouter 的實例對象 ,然后將其傳入 Vue 實例的 options 中。
export default class VueRouter {
static install: () => void;
static version: string;
app: any;
apps: Array<any>;
ready: boolean;
readyCbs: Array<Function>;
options: RouterOptions;
mode: string;
history: HashHistory | HTML5History | AbstractHistory;
matcher: Matcher;
fallback: boolean;
beforeHooks: Array<?NavigationGuard>;
resolveHooks: Array<?NavigationGuard>;
afterHooks: Array<?AfterNavigationHook>;
constructor (options: RouterOptions = {}) {
this.app = null
this.apps = []
this.options = options
this.beforeHooks = []
this.resolveHooks = []
this.afterHooks = []
// 創建 matcher 匹配函數
this.matcher = createMatcher(options.routes || [], this)
// 根據 mode 實例化具體的 History,默認為'hash'模式
let mode = options.mode || 'hash'
// 通過 supportsPushState 判斷瀏覽器是否支持'history'模式
// 如果設置的是'history'但是如果瀏覽器不支持的話,'history'模式會退回到'hash'模式
// fallback 是當瀏覽器不支持 history.pushState 控制路由是否應該回退到 hash 模式。默認值為 true。
this.fallback = mode === 'history' && !supportsPushState && options.fallback !== false
if (this.fallback) {
mode = 'hash'
}
// 不在瀏覽器內部的話,就會變成'abstract'模式
if (!inBrowser) {
mode = 'abstract'
}
this.mode = mode
// 根據不同模式選擇實例化對應的 History 類
switch (mode) {
case 'history':
this.history = new HTML5History(this, options.base)
break
case 'hash':
this.history = new HashHistory(this, options.base, this.fallback)
break
case 'abstract':
this.history = new AbstractHistory(this, options.base)
break
default:
if (process.env.NODE_ENV !== 'production') {
assert(false, `invalid mode: ${mode}`)
}
}
}
match (
raw: RawLocation,
current?: Route,
redirectedFrom?: Location
): Route {
return this.matcher.match(raw, current, redirectedFrom)
}
get currentRoute (): ?Route {
return this.history && this.history.current
}
init (app: any /* Vue component instance */) {
process.env.NODE_ENV !== 'production' && assert(
install.installed,
`not installed. Make sure to call \`Vue.use(VueRouter)\` ` +
`before creating root instance.`
)
this.apps.push(app)
// main app already initialized.
if (this.app) {
return
}
this.app = app
const history = this.history
// 根據history的類別執行相應的初始化操作和監聽
if (history instanceof HTML5History) {
history.transitionTo(history.getCurrentLocation())
} else if (history instanceof HashHistory) {
const setupHashListener = () => {
history.setupListeners()
}
history.transitionTo(
history.getCurrentLocation(),
setupHashListener,
setupHashListener
)
}
history.listen(route => {
this.apps.forEach((app) => {
app._route = route
})
})
}
// 路由跳轉之前
beforeEach (fn: Function): Function {
return registerHook(this.beforeHooks, fn)
}
// 路由導航被確認之間前
beforeResolve (fn: Function): Function {
return registerHook(this.resolveHooks, fn)
}
// 路由跳轉之后
afterEach (fn: Function): Function {
return registerHook(this.afterHooks, fn)
}
// 第一次路由跳轉完成時被調用的回調函數
onReady (cb: Function, errorCb?: Function) {
this.history.onReady(cb, errorCb)
}
// 路由報錯
onError (errorCb: Function) {
this.history.onError(errorCb)
}
// 路由添加,這個方法會向history棧添加一個記錄,點擊后退會返回到上一個頁面。
push (location: RawLocation, onComplete?: Function, onAbort?: Function) {
this.history.push(location, onComplete, onAbort)
}
// 這個方法不會向history里面添加新的記錄,點擊返回,會跳轉到上上一個頁面。上一個記錄是不存在的。
replace (location: RawLocation, onComplete?: Function, onAbort?: Function) {
this.history.replace(location, onComplete, onAbort)
}
// 相對于當前頁面向前或向后跳轉多少個頁面,類似 window.history.go(n)。n可為正數可為負數。正數返回上一個頁面
go (n: number) {
this.history.go(n)
}
// 后退到上一個頁面
back () {
this.go(-1)
}
// 前進到下一個頁面
forward () {
this.go(1)
}
getMatchedComponents (to?: RawLocation | Route): Array<any> {
const route: any = to
? to.matched
? to
: this.resolve(to).route
: this.currentRoute
if (!route) {
return []
}
return [].concat.apply([], route.matched.map(m => {
return Object.keys(m.components).map(key => {
return m.components[key]
})
}))
}
resolve (
to: RawLocation,
current?: Route,
append?: boolean
): {
location: Location,
route: Route,
href: string,
// for backwards compat
normalizedTo: Location,
resolved: Route
} {
const location = normalizeLocation(
to,
current || this.history.current,
append,
this
)
const route = this.match(location, current)
const fullPath = route.redirectedFrom || route.fullPath
const base = this.history.base
const href = createHref(base, fullPath, this.mode)
return {
location,
route,
href,
// for backwards compat
normalizedTo: location,
resolved: route
}
}
addRoutes (routes: Array<RouteConfig>) {
this.matcher.addRoutes(routes)
if (this.history.current !== START) {
this.history.transitionTo(this.history.getCurrentLocation())
}
}
}
HashHistory
• hash雖然出現在url中,但不會被包括在http請求中,它是用來指導瀏覽器動作的,對服務器端沒影響,因此,改變hash不會重新加載頁面。
• 可以為hash的改變添加監聽事件:
window.addEventListener("hashchange",funcRef,false)
• 每一次改變hash(window.location.hash),都會在瀏覽器訪問歷史中增加一個記錄。
export class HashHistory extends History {
constructor (router: Router, base: ?string, fallback: boolean) {
super(router, base)
// check history fallback deeplinking
// 如果是從history模式降級來的,需要做降級檢查
if (fallback && checkFallback(this.base)) {
// 如果降級且做了降級處理,則返回
return
}
ensureSlash()
}
.......
function checkFallback (base) {
const location = getLocation(base)
// 得到除去base的真正的 location 值
if (!/^\/#/.test(location)) {
// 如果此時地址不是以 /# 開頭的
// 需要做一次降級處理,降為 hash 模式下應有的 /# 開頭
window.location.replace(
cleanPath(base + '/#' + location)
)
return true
}
}
function ensureSlash (): boolean {
// 得到 hash 值
const path = getHash()
if (path.charAt(0) === '/') {
// 如果是以 / 開頭的,直接返回即可
return true
}
// 不是的話,需要手動保證一次 替換 hash 值
replaceHash('/' + path)
return false
}
export function getHash (): string {
// We can't use window.location.hash here because it's not
// consistent across browsers - Firefox will pre-decode it!
// 因為兼容性的問題,這里沒有直接使用 window.location.hash
// 因為 Firefox decode hash 值
const href = window.location.href
const index = href.indexOf('#')
return index === -1 ? '' : decodeURI(href.slice(index + 1))
}
// 得到hash之前的url地址
function getUrl (path) {
const href = window.location.href
const i = href.indexOf('#')
const base = i >= 0 ? href.slice(0, i) : href
return `${base}#${path}`
}
// 添加一個hash
function pushHash (path) {
if (supportsPushState) {
pushState(getUrl(path))
} else {
window.location.hash = path
}
}
// 替代hash
function replaceHash (path) {
if (supportsPushState) {
replaceState(getUrl(path))
} else {
window.location.replace(getUrl(path))
}
}
hash的改變會自動添加到瀏覽器的訪問歷史記錄中。 那么視圖的更新是怎么實現的呢,看下 transitionTo()方法:
transitionTo (location: RawLocation, onComplete?: Function, onAbort?: Function) {
const route = this.router.match(location, this.current) //找到匹配路由
this.confirmTransition(route, () => { //確認是否轉化
this.updateRoute(route) //更新route
onComplete && onComplete(route)
this.ensureURL()
// fire ready cbs once
if (!this.ready) {
this.ready = true
this.readyCbs.forEach(cb => { cb(route) })
}
}, err => {
if (onAbort) {
onAbort(err)
}
if (err && !this.ready) {
this.ready = true
this.readyErrorCbs.forEach(cb => { cb(err) })
}
})
}
//更新路由
updateRoute (route: Route) {
const prev = this.current // 跳轉前路由
this.current = route // 裝備跳轉路由
this.cb && this.cb(route) // 回調函數,這一步很重要,這個回調函數在index文件中注冊,會更新被劫持的數據 _router
this.router.afterHooks.forEach(hook => {
hook && hook(route, prev)
})
}
}
pushState
export function pushState (url?: string, replace?: boolean) {
saveScrollPosition()
// try...catch the pushState call to get around Safari
// DOM Exception 18 where it limits to 100 pushState calls
// 加了 try...catch 是因為 Safari 有調用 pushState 100 次限制
// 一旦達到就會拋出 DOM Exception 18 錯誤
const history = window.history
try {
if (replace) {
// replace 的話 key 還是當前的 key 沒必要生成新的
history.replaceState({ key: _key }, '', url)
} else {
// 重新生成 key
_key = genKey()
// 帶入新的 key 值
history.pushState({ key: _key }, '', url)
}
} catch (e) {
// 達到限制了 則重新指定新的地址
window.location[replace ? 'replace' : 'assign'](url)
}
}
replaceState
// 直接調用 pushState 傳入 replace 為 true
export function replaceState (url?: string) {
pushState(url, true)
}
pushState和replaceState兩種方法的共同特點:當調用他們修改瀏覽器歷史棧后,雖然當前url改變了,但瀏覽器不會立即發送請求該url,這就為單頁應用前端路由,更新視圖但不重新請求頁面提供了基礎。
supportsPushState
export const supportsPushState = inBrowser && (function () {
const ua = window.navigator.userAgent
if (
(ua.indexOf('Android 2.') !== -1 || ua.indexOf('Android 4.0') !== -1) &&
ua.indexOf('Mobile Safari') !== -1 &&
ua.indexOf('Chrome') === -1 &&
ua.indexOf('Windows Phone') === -1
) {
return false
}
return window.history && 'pushState' in window.history
})()
其實所謂響應式屬性,即當_route值改變時,會自動調用Vue實例的render()方法,更新視圖。 $router.push()-->HashHistory.push()-->History.transitionTo()-->History.updateRoute()-->{app._route=route}-->vm.render()
監聽地址欄
在瀏覽器中,用戶可以直接在瀏覽器地址欄中輸入改變路由,因此還需要監聽瀏覽器地址欄中路由的變化 ,并具有與通過代碼調用相同的響應行為,在HashHistory中這一功能通過setupListeners監聽hashchange實現:
setupListeners () {
window.addEventListener('hashchange', () => {
if (!ensureSlash()) {
return
}
this.transitionTo(getHash(), route => {
replaceHash(route.fullPath)
})
})
}
HTML5History
History interface是瀏覽器歷史記錄棧提供的接口,通過back(),forward(),go()等方法,我們可以讀取瀏覽器歷史記錄棧的信息,進行各種跳轉操作。
export class HTML5History extends History {
constructor (router: Router, base: ?string) {
super(router, base)
const expectScroll = router.options.scrollBehavior //指回滾方式
const supportsScroll = supportsPushState && expectScroll
if (supportsScroll) {
setupScroll()
}
const initLocation = getLocation(this.base)
//監控popstate事件
window.addEventListener('popstate', e => {
const current = this.current
// Avoiding first `popstate` event dispatched in some browsers but first
// history route not updated since async guard at the same time.
// 避免在某些瀏覽器中首次發出“popstate”事件
// 由于同一時間異步監聽,history路由沒有同時更新。
const location = getLocation(this.base)
if (this.current === START && location === initLocation) {
return
}
this.transitionTo(location, route => {
if (supportsScroll) {
handleScroll(router, route, current, true)
}
})
})
}
hash模式僅改變hash部分的內容,而hash部分是不會包含在http請求中的(hash帶#):
oursite.com/#/user/id //如請求,只會發送http://oursite.com/
所以hash模式下遇到根據url請求頁面不會有問題
而history模式則將url修改的就和正常請求后端的url一樣(history不帶#)
如果這種向后端發送請求的話,后端沒有配置對應/user/id的get路由處理,會返回404錯誤。
官方推薦的解決辦法是在服務端增加一個覆蓋所有情況的候選資源:如果 URL 匹配不到任何靜態資源,則應該返回同一個 index.html 頁面,這個頁面就是你 app 依賴的頁面。同時這么做以后,服務器就不再返回 404 錯誤頁面,因為對于所有路徑都會返回 index.html 文件。為了避免這種情況,在 Vue 應用里面覆蓋所有的路由情況,然后在給出一個 404 頁面?;蛘?,如果是用 Node.js 作后臺,可以使用服務端的路由來匹配 URL,當沒有匹配到路由的時候返回 404,從而實現 fallback。
兩種模式比較
一般的需求場景中,hash模式與history模式是差不多的,根據MDN的介紹,調用history.pushState()相比于直接修改hash主要有以下優勢:
• pushState設置的新url可以是與當前url同源的任意url,而hash只可修改#后面的部分,故只可設置與當前同文檔的url
• pushState設置的新url可以與當前url一模一樣,這樣也會把記錄添加到棧中,而hash設置的新值必須與原來不一樣才會觸發記錄添加到棧中
• pushState通過stateObject可以添加任意類型的數據記錄中,而hash只可添加短字符串 pushState可額外設置title屬性供后續使用
AbstractHistory
'abstract'模式,不涉及和瀏覽器地址的相關記錄,流程跟'HashHistory'是一樣的,其原理是通過數組模擬瀏覽器歷史記錄棧的功能
//abstract.js實現,這里通過棧的數據結構來模擬路由路徑
export class AbstractHistory extends History {
index: number;
stack: Array<Route>;
constructor (router: Router, base: ?string) {
super(router, base)
this.stack = []
this.index = -1
}
// 對于 go 的模擬
go (n: number) {
// 新的歷史記錄位置
const targetIndex = this.index + n
// 小于或大于超出則返回
if (targetIndex < 0 || targetIndex >= this.stack.length) {
return
}
// 取得新的 route 對象
// 因為是和瀏覽器無關的 這里得到的一定是已經訪問過的
const route = this.stack[targetIndex]
// 所以這里直接調用 confirmTransition 了
// 而不是調用 transitionTo 還要走一遍 match 邏輯
this.confirmTransition(route, () => {
this.index = targetIndex
this.updateRoute(route)
})
}
//確認是否轉化路由
confirmTransition (route: Route, onComplete: Function, onAbort?: Function) {
const current = this.current
const abort = err => {
if (isError(err)) {
if (this.errorCbs.length) {
this.errorCbs.forEach(cb => { cb(err) })
} else {
warn(false, 'uncaught error during route navigation:')
console.error(err)
}
}
onAbort && onAbort(err)
}
//判斷如果前后是同一個路由,不進行操作
if (
isSameRoute(route, current) &&
route.matched.length === current.matched.length
) {
this.ensureURL()
return abort()
}
//下面是各類鉤子函數的處理
//*********************
})
}
看到這里你已經對vue-router的路由基本掌握的差不多了,要是喜歡看源碼可以 點擊查 看
要是喜歡可以給我一個star,github
總結
以上所述是小編給大家介紹的vue-router原理淺析,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對腳本之家網站的支持!
相關文章
基于vue+electron實現文件下載打開wps預覽
這篇文章主要給大家介紹了基于vue+electron實現文件下載打開wps預覽,文中有詳細的代碼示例供大家借鑒參考,感興趣的同學可以參考閱讀下2023-08-08
Vue3 directive自定義指令內部實現示例
這篇文章主要為大家介紹了Vue3 directive自定義指令內部實現示例,有需要的朋友可以借鑒參考下,希望能夠有所幫助,祝大家多多進步,早日升職加薪2022-12-12
vue3+ts前端封裝EventSource并在請求頭添加token的方法
這篇文章主要介紹了vue3+ts前端封裝EventSource并在請求頭添加token,本文將介紹如何使用 event-source-polyfill 來解決這個問題,需要的朋友可以參考下2024-12-12
詳解vue-cli開發環境跨域問題解決方案
本篇文章主要介紹了vue-cli開發環境跨域問題解決方案,具有一定的參考價值,感興趣的小伙伴們可以參考一下。2017-06-06
如何使用fetchEventSource實現sse流式請求
這篇文章主要介紹了如何使用fetchEventSource實現sse流式請求問題,具有很好的參考價值,希望對大家有所幫助,如有錯誤或未考慮完全的地方,望不吝賜教2024-08-08

