.netcore 使用surging框架發布到docker

更新時間：2018年03月21日 11:01:55 作者：landonzeng

這篇文章主要介紹了netcore 使用surging框架發布到docker，小編覺得挺不錯的，現在分享給大家，也給大家做個參考。一起跟隨小編過來看看吧

demo運行在windows的docker中，系統是win10，所以需要先下載Docker for Windows，安裝完畢后系統會重啟，然后桌面上可以找到Docker for Windows的快捷圖標，右下角有個鯨魚小圖標

單擊右鍵，選擇菜單中的Kitematic

會提示你下載Kitematic，自行下載后解壓即可，將Kitematic快捷到桌面；

打開Kitematic，在搜索欄中下載好RabbitMQ、redis、consul相關鏡像，因?yàn)檫@些是surging運行的先決條件。

接著去GitHub上下載surging網關項目，修改其中的gatewaySettings.json中Register下的Address地址，對應的事consul docker鏡像的ip

具體如何查看其ip，看如下操作：

打開Kitematic，點擊左下角，如圖：

進入到命令窗口，輸入docker container ls或者 docker ps -a 查看docker，

可以看到現在運行的docker的相關信息，

如圖：

然后查看consul的相關配置，輸入docker inspect 鏡像的 containerID，如consul的id是b0e98b94638c，輸入命令如下：docker inspect b0e98b94638c，

顯示這個docker的配置，內容會很多，不過ip的信息在最后，如圖

找到其中的ip是多少，然后修改surging網關中的consul地址為："Address": "172.17.0.4:8500"，其他配置根據上面的操作進行修改，如redis 鏡像地址的查找和修改等；

修改好surging的網關配置后在Surging.ApiGateway項目上單擊右鍵，由于我項目中已經添加過，所以該處為灰色，如圖：

新建docker-Compose后修改其中docker-compose.yml的配置如下：

在后面添加docker的外部端口和內部端口的映射和網絡模式，這里我們都使用橋接模式，包括之前的consul、RabbitMQ、redis都是同一模式，這樣他們會在同一VLAN下，

然后運行網關，如下：

接下來新建一個解決方案，方案名隨意，喜歡就好，由于時間比較短，這里我簡單的處理，不清楚的可以留言

新建Service.A，然后在其下新建控制臺應用Service.A、Service.B、Service.C，新建類庫Service.A.Service、Service.B.Service、Service.C.Service；

編輯Service.A.csporj、Service.B.csporj、Service.C.csporj，如下

將其中的引用包都復制過去，分別修改一下對應的Service，即其中的<ProjectReference Include="..\Service.A.Service\Service.A.Service.csproj" />，Service.A引用Service.A.Service，Service.B引用Service.B.Service

Service.C引用Service.C.Service;

類庫Service.A.Service、Service.B.Service、Service.C.Service中都引用

如圖：

由于代碼很多地方相識，以下我只說Service.A,和Service.A.Service；

Service.A 中新增Configs文件夾，下面添加log4net.config，log4net.config代碼如下：

<log4net>

 <root>

 <level value="Error" />

 <!-- <appender-ref ref="RollingLogFileAppender" /> -->

 <appender-ref ref="ErrorRollingLogFileAppender" />

 </root>

 <appender name="ErrorRollingLogFileAppender" type="log4net.Appender.RollingFileAppender,log4net" LEVEL="ERROR">

 <lockingModel type="log4net.Appender.FileAppender+MinimalLock" />

 <param name="File" value="c:\surging\Error\" />

 <param name="AppendToFile" value="true" />

 <param name="RollingStyle" value="Composite" />

 <param name="DatePattern" value="_yyyyMMddHH.TXT" />

 <param name="StaticLogFileName" value="false" />

 <param name="MaxSizeRollBackups" value="-1" />

 <param name="MaximumFileSize" value="5MB" />

 <layout type="log4net.Layout.PatternLayout,log4net">

  <param name="ConversionPattern" value="%date [%thread] %-5level %logger [%ndc] - %message%newline" />

 </layout>

 <filter type="log4net.Filter.LevelRangeFilter">

  <param name="LevelMin" value="ERROR" />

  <param name="LevelMax" value="FATAL" />

 </filter>

 </appender>

</log4net>

然后新增cacheSettings.json其中Map:Properties下的value的值是redis地址

{ 
 "CachingSettings": [
  {
  "Id": "ddlCache",
  "Class": "Surging.Core.Caching.RedisCache.RedisContext,Surging.Core.Caching",
  "Properties": [
   {
   "Name": "appRuleFile",
   "Ref": "rule"
   },
   {
   "Name": "dataContextPool",
   "Ref": "ddls_sample",
   "Maps": [
    {
    "Name": "Redis",
    "Properties": [
    {
     "value": "172.17.0.2:6379::1"
     }
    ]
    },
    {
    "Name": "MemoryCache"
    }
   ]
   },
   {
   "Name": "defaultExpireTime",
   "value": "120"
   },
   {
   "Name": "connectTimeout",
   "Value": "120"
   },
   {
   "Name": "minSize",
   "Value": "1"

   },
   {
   "Name": "maxSize",
   "Value": "10"
   }
  ]
  }
 ]
}

新增eventBusSettings.json，其中的EventBusConnection對應的是RabbitMQ docker的地址

{
 "EventBusConnection": "172.17.0.3",
 "EventBusUserName": "guest",
 "EventBusPassword": "guest"
}

Program.cs的代碼如下

using Autofac;
using Surging.Core.Codec.MessagePack;
using Surging.Core.Consul;
using Surging.Core.Consul.Configurations;
using Surging.Core.CPlatform;
using Surging.Core.CPlatform.Utilities;
using Surging.Core.DotNetty;
using Surging.Core.EventBusRabbitMQ;
using Surging.Core.Log4net;
using Surging.Core.ProxyGenerator;
using Surging.Core.ServiceHosting;
using Surging.Core.ServiceHosting.Internal.Implementation;
using System;
using System.Text;
namespace Service.A
{
 class Program
 {
  static void Main(string[] args)
  {
   NewMethod();
  }
  private static void NewMethod()

  {

   Encoding.RegisterProvider(CodePagesEncodingProvider.Instance);

   var host = new ServiceHostBuilder()

    .RegisterServices(builder =>

    {

     builder.AddMicroService(option =>

     {

      option.AddServiceRuntime();

      option.AddRelateService();

      //option.UseZooKeeperManager(new ConfigInfo("127.0.0.1:2181"));

      option.UseConsulManager(new ConfigInfo("172.17.0.4:8500"));

      option.UseDotNettyTransport();

      option.UseRabbitMQTransport();

      option.AddRabbitMQAdapt();

      //option.UseProtoBufferCodec();

      option.UseMessagePackCodec();

      builder.Register(p => new CPlatformContainer(ServiceLocator.Current));

     });

    })

    .SubscribeAt()

    .UseLog4net("Configs/log4net.config")

    //.UseServer("127.0.0.1", 98)

    //.UseServer("127.0.0.1", 98，“true”) //自動生成Token

    //.UseServer("127.0.0.1", 98，“123456789”) //固定密碼Token

    .UseServer(options =>

    {

     options.Ip = "172.17.0.6";

     options.Port = 9990;

     options.Token = "True";

     options.ExecutionTimeoutInMilliseconds = 30000;

     options.MaxConcurrentRequests = 200;

     options.NotRelatedAssemblyFiles = "Centa.Agency.Application.DTO\\w*|StackExchange.Redis\\w*";

    })

    .UseProxy()

    .UseStartup<Startup>()

    .Build();

   using (host.Run())

   {
    Console.WriteLine($"服務端啟動成功，{DateTime.Now}。");
   }
  }
 }
}

新增Startup.cs

using Autofac;
using Autofac.Extensions.DependencyInjection;
using Microsoft.Extensions.Configuration;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Logging;
using Surging.Core.Caching.Configurations;
using Surging.Core.CPlatform.Utilities;
using Surging.Core.EventBusRabbitMQ.Configurations;
using System;
namespace Service.A
{
 public class Startup

 {
  public Startup()
  {
   var config = new ConfigurationBuilder()

   .SetBasePath(AppContext.BaseDirectory);

   ConfigureEventBus(config);

   //ConfigureCache(config);

  }
  public IContainer ConfigureServices(ContainerBuilder builder)
  {
   var services = new ServiceCollection();
   ConfigureLogging(services);
   builder.Populate(services);
   ServiceLocator.Current = builder.Build();
   return ServiceLocator.Current;
  }
  public void Configure(IContainer app)
  {
   app.Resolve<ILoggerFactory>()
     .AddConsole((c, l) => (int)l >= 3);

  }

  #region 私有方法
  /// <summary>
  /// 配置日志服務
  /// </summary>
  /// <param name="services"></param>
  private void ConfigureLogging(IServiceCollection services)
  {
   services.AddLogging();
  }
 
  private static void ConfigureEventBus(IConfigurationBuilder build)

  {
   build

   .AddEventBusFile("eventBusSettings.json", optional: false);
  } 

  /// <summary>
  /// 配置緩存服務
  /// </summary>
  private void ConfigureCache(IConfigurationBuilder build)
  {
   build
    .AddCacheFile("cacheSettings.json", optional: false);
  }
  #endregion
 }
}

Service.A.Service 類庫下新增AService.cs

using Surging.Core.ProxyGenerator;
using System;
using System.Collections.Generic;
using System.Text;
using System.Threading.Tasks;
namespace Service.A.Service

{
 public class AService:ProxyServiceBase,IAService

 {
  public Task<string> SayHello(string name)

  {
   return Task.FromResult($"{name} say : hello");
  }
 }
}

新增IAService.cs

using Surging.Core.CPlatform.Ioc;
using Surging.Core.CPlatform.Runtime.Server.Implementation.ServiceDiscovery.Attributes;
using System;
using System.Collections.Generic;
using System.Text;
using System.Threading.Tasks;
namespace Service.A.Service
{
 [ServiceBundle("api/{Service}")]
 public interface IAService : IServiceKey
 {
  Task<string> SayHello(string name); 
 }
}

其他類庫和服務與以上代碼基本無二，這里不在贅述。不清楚的可以留言

所有代碼都處理好后，在Service.A、Service.B、Service.C項目上右鍵新增docker支持文件，然后會生成一下文件

修改其中的docker-compose.yml

version: '3'

 

services:

 service.a:

 image: servicea

 ports:

  - "127.0.0.1:9990:9990"

 network_mode: "bridge"

 build:

  context: .

  dockerfile: Service.A/Dockerfile

 

 service.b:

 image: serviceb

 ports:

  - "127.0.0.1:9991:9991"

 network_mode: "bridge"

 build:

  context: .

  dockerfile: Service.B/Dockerfile

 

 service.c:

 image: servicec

 ports:

  - "127.0.0.1:9992:9992"

 network_mode: "bridge"

 build:

  context: .

  dockerfile: Service.C/Dockerfile

 

 webapplication1:

 image: webapplication1

 build:

  context: .

  dockerfile: ../WebApplication1/Dockerfile

然后選擇docker運行即可

最后訪問surging網關，即可看見效果