基于Oracle閃回詳解(必看篇)
更新時間：2017年12月15日 15:25:35 作者：Rangle
下面小編就為大家分享一篇基于Oracle閃回詳解，具有很好的參考價值，希望對大家有所幫助。一起跟隨小編過來看看吧
Oracle 9i 開始支持閃回，Oracle10g開始全面支持閃回功能，Oracle11g有所完善，為大家快速的恢復數據，查詢歷史數據提供了很大的便捷方法。
本文主要對Oracle常用閃回使用做些詳細介紹，其中對于不常用的事務和版本閃回，這里就不做介紹
一、Oracle閃回概述
| 閃回級別 | 閃回場景 | 閃回技術 | 對象依賴 | 影響數據 |
| 數據庫 | 表截斷、邏輯錯誤、其他多表意外事件 | 閃回DATABASE | 閃回日志、undo | 是 |
| DROP | 刪除表 | 閃回DROP | 回收站(recyclebin) | 是 |
| 表 | 更新、刪除、插入記錄 | 閃回TABLE | 還原數據,undo | 是 |
| 查詢 | 當前數據和歷史數據對比 | 閃回QUERY | 還原數據,undo | 否 |
| 版本查詢 | 比較行版本 | 閃回Version Query | 還原數據,undo | 否 |
| 事務查詢 | 比較 | 閃回Transaction Query | 還原數據,undo | 否 |
| 歸檔 | DDL、DML | 閃回Archive | 歸檔日志 | 是 |
二、Oracle閃回使用詳解
1、閃回開啟
(1)開啟閃回必要條件
a.開啟歸檔日志
SQL> archive log list; Database log mode Archive Mode Automatic archival Enabled Archive destination /home/U01/app/oracle/oradata/testdb/arch Oldest online log sequence 844 Next log sequence to archive 846 Current log sequence 846 ##如未開啟，在mount狀態執行alter database archivelog;
b.設置合理的閃回區
db_recovery_file_dest：指定閃回恢復區的位置
db_recovery_file_dest_size：指定閃回恢復區的可用空間大小
db_flashback_retention_target：指定數據庫可以回退的時間，單位為分鐘，默認1440分鐘(1天),實際取決于閃回區大小
(2)檢查是否開啟閃回
SQL> select flashback_on from v$database; FLASHBACK_ON ------------------ NO
(3)開啟閃回
a.開啟歸檔
mount狀態：alter database archivelog;
b.設置閃回區
SQL> alter system set db_recovery_file_dest='/home/U01/app/oracle/fast_recovery_area' scope=both; System altered. SQL> alter system set db_recovery_file_dest_size=60G scope=both; System altered. SQL> alter system set db_flashback_retention_target=4320 scope=both; System altered.
c.開啟flashback (10g在mount開啟)
SQL> alter database flashback on; Database altered.
(4)確定閃回開啟
SQL> select flashback_on from v$database; FLASHBACK_ON ------------------ YES
(5)關閉閃回
SQL> alter database flashback off; Database altered.
2、閃回使用
(1)閃回查詢
閃回查詢主要是根據Undo表空間數據進行多版本查詢，針對v$和x$動態性能視圖無效，但對DBA_、ALL_、USER_是有效的
a.閃回查詢
允許用戶查詢過去某個時間點的數據，用以重構由于意外刪除或更改的數據，數據不會變化。
SQL> select * from scott.dept;
DEPTNO DNAME LOC
---------- -------------- -------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
OPERATIONS BOSTON
SQL> delete from scott.dept where deptno=40;
row deleted.
SQL> commit;
Commit complete.
SQL> select * from scott.dept as of timestamp sysdate-10/1440;
DEPTNO DNAME LOC
---------- -------------- -------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
OPERATIONS BOSTON
SQL> select * from scott.dept as of timestamp to_timestamp('2017-12-14 16:20:00','yyyy-mm-dd hh24:mi:ss');
DEPTNO DNAME LOC
---------- -------------- -------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
OPERATIONS BOSTON
SQL> select * from scott.dept as of scn 16801523;
DEPTNO DNAME LOC
---------- -------------- -------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
OPERATIONS BOSTON
b.閃回版本查詢
用于查詢行級數據庫隨時間變化的方法
c.閃回事務查詢
用于提供查看事務級別數據庫變化的方法
(2)閃回表(update/insert/delete)
閃回表就是對表的數據做回退，回退到之前的某個時間點，其利用的是undo的歷史數據，與undo_retention設置有關，默認是14400分鐘（1天）
同樣，sys用戶表空間不支持閃回表,要想表閃回，需要允許表啟動行遷移(row movement)
閃回表示例：
SQL> flashback table scott.dept to timestamp to_timestamp('2017-12-14 16:20:00','yyyy-mm-dd hh24:mi:ss');
flashback table scott.dept to timestamp to_timestamp('2017-12-14 16:20:00','yyyy-mm-dd hh24:mi:ss')
ERROR at line 1:
ORA-08189: cannot flashback the table because row movement is not enabled
SQL> select row_movement from dba_tables where table_name='DEPT' and owner='SCOTT';
ROW_MOVE
--------
DISABLED
SQL> alter table scott.dept enable row movement;
Table altered.
SQL> flashback table scott.dept to timestamp to_timestamp('2017-12-14 16:20:00','yyyy-mm-dd hh24:mi:ss');
Flashback complete.
SQL> select * from scott.dept;
DEPTNO DNAME LOC
---------- -------------- -------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
OPERATIONS BOSTON
SQL> alter table scott.dept disable row movement;
Table altered.
(3)閃回DROP(drop table)
當一個表被drop掉，表會被放入recyclebin回收站，可通過回收站做表的閃回。表上的索引、約束等同樣會被恢復
不支持sys/system用戶表空間對象，可通過alter system set recyclebin=off;關閉回收站功能
閃回DROP示例：
SQL> select * from t ; ID NAME ---------- --------------------------------------- 2 4 SQL> drop table t; Table dropped. SQL> show recyclebin; ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME ---------------- ------------------------------ ------------ ------------------- T BIN$YEh2QcvZdJLgUxyAgQpnVQ==$0 TABLE 2017-12-14:15:02:06 SQL> flashback table t to before drop; Flashback complete. SQL> select * from t; ID NAME ---------- ------------------------------------- 2 4
備注：即使不開始flashback，只要開啟了recyclebin，那么就可以閃回DROP表。
但如果連續覆蓋，就需要指定恢復的表名，如果已經存在表，則需要恢復重命名。
SQL> show recyclebin; ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME ---------------- ------------------------------ ------------ ------------------- T BIN$YEh2QcvddJLgUxyAgQpnVQ==$0 TABLE 2017-12-14:15:07:54 T BIN$YEh2QcvcdJLgUxyAgQpnVQ==$0 TABLE 2017-12-14:15:07:27 SQL> flashback table "BIN$YEh2QcvcdJLgUxyAgQpnVQ==$0" to before drop ; Flashback complete. SQL> show recyclebin; ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME ---------------- ------------------------------ ------------ ------------------- T BIN$YEh2QcvddJLgUxyAgQpnVQ==$0 TABLE 2017-12-14:15:07:54 SQL> flashback table t to before drop rename to tt; Flashback complete.
(4)閃回數據庫(truncate/多表數據變更)
數據庫閃回必須在mounted狀態下進行，基于快照的可以再open下進行閃回庫
閃回數據庫主要是將數據庫還原值過去的某個時間點或SCN，用于數據庫出現邏輯錯誤時，需要open database resetlogs
a.全庫閃回
數據庫閃回示例
SQL> select * from scott.EMP;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------------- ---------- ---------- ----------
SMITH CLERK 7902 1980-12-17 00:00:00 800 20
ALLEN SALESMAN 7698 1981-02-20 00:00:00 1600 300 30
WARD SALESMAN 7698 1981-02-22 00:00:00 1250 500 30
JONES MANAGER 7839 1981-04-02 00:00:00 2975 20
MARTIN SALESMAN 7698 1981-09-28 00:00:00 1250 1400 30
BLAKE MANAGER 7839 1981-05-01 00:00:00 2850 30
CLARK MANAGER 7839 1981-06-09 00:00:00 2450 10
SCOTT ANALYST 7566 1987-04-19 00:00:00 3000 20
KING PRESIDENT 1981-11-17 00:00:00 5000 10
TURNER SALESMAN 7698 1981-09-08 00:00:00 1500 0 30
ADAMS CLERK 7788 1987-05-23 00:00:00 1100 20
JAMES CLERK 7698 1981-12-03 00:00:00 950 30
FORD ANALYST 7566 1981-12-03 00:00:00 3000 20
MILLER CLERK 7782 1982-01-23 00:00:00 1300 10
rows selected.
SQL> truncate table scott.EMP;
Table truncated.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 9.4067E+10 bytes
Fixed Size 2263936 bytes
Variable Size 9395242112 bytes
Database Buffers 8.4557E+10 bytes
Redo Buffers 112766976 bytes
Database mounted.
SQL> flashback database to timestamp to_timestamp('2017-12-14 14:12:46','yyyy-mm-dd HH24:MI:SS');
Flashback complete.
SQL> alter database open resetlogs;
Database altered.
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------------- ---------- ---------- ----------
SMITH CLERK 7902 1980-12-17 00:00:00 800 20
ALLEN SALESMAN 7698 1981-02-20 00:00:00 1600 300 30
WARD SALESMAN 7698 1981-02-22 00:00:00 1250 500 30
JONES MANAGER 7839 1981-04-02 00:00:00 2975 20
MARTIN SALESMAN 7698 1981-09-28 00:00:00 1250 1400 30
BLAKE MANAGER 7839 1981-05-01 00:00:00 2850 30
CLARK MANAGER 7839 1981-06-09 00:00:00 2450 10
SCOTT ANALYST 7566 1987-04-19 00:00:00 3000 20
KING PRESIDENT 1981-11-17 00:00:00 5000 10
TURNER SALESMAN 7698 1981-09-08 00:00:00 1500 0 30
ADAMS CLERK 7788 1987-05-23 00:00:00 1100 20
JAMES CLERK 7698 1981-12-03 00:00:00 950 30
FORD ANALYST 7566 1981-12-03 00:00:00 3000 20
MILLER CLERK 7782 1982-01-23 00:00:00 1300 10
rows selected.
b.快照閃回
針對主庫和備庫都可以創建閃回快照點，然后恢復到指定的快照點，但主庫一旦恢復到快照點，備庫的同步則需要重新同步
SQL> select * from scott.dept;
DEPTNO DNAME LOC ADDR
---------- -------------- ------------- ------------------------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
SQL> create restore point before_201712151111 guarantee flashback database;
Restore point created.
SQL> create table scott.t as select * from scott.dept;
Table created.
SQL> truncate table scott.t;
Table truncated.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 9.4067E+10 bytes
Fixed Size 2263936 bytes
Variable Size 9663677568 bytes
Database Buffers 8.4289E+10 bytes
Redo Buffers 112766976 bytes
Database mounted.
SQL> flashback database to restore point before_201712151111;
Flashback complete.
SQL> alter database open resetlogs;
Database altered.
此時主庫scott.t已不存在：
SQL> select * from scott.t;
select * from scott.t
*
ERROR at line 1:
ORA-00942: table or view does not exist
此時從庫的scott.依舊存在，主備同步終止
解決方案：在主庫創建快照時間點，從庫自動停止應用日志，等主庫閃回后，重新應用日志即可。
如果已經做了上述操作，從庫可以選擇重建
ALTER DATABASE REGISTER LOGFILE '/xx/xx/archive.dbf';
c.閃回snapshot standby
此功能在11GR2非常實用，可自動創建閃回點、開啟閃回日志，可完成線上數據測試后，然后做數據庫閃回恢復主備關系
select scn, STORAGE_SIZE ,to_char(time,'yyyy-mm-dd hh24:mi:ss') time,NAME from v$restore_point;
select database_role,open_mode,db_unique_name,flashback_on from v$database;
SQL> set line 200;
SQL> set pagesize 2000;
SQL> select database_role,open_mode,db_unique_name,flashback_on from v$database;
DATABASE_ROLE OPEN_MODE DB_UNIQUE_NAME FLASHBACK_ON
---------------- -------------------- ------------------------------ ------------------
PHYSICAL STANDBY READ ONLY testdbms NO
SQL> ALTER DATABASE CONVERT TO SNAPSHOT STANDBY;
Database altered.
SQL> select database_role,open_mode,db_unique_name,flashback_on from v$database;
DATABASE_ROLE OPEN_MODE DB_UNIQUE_NAME FLASHBACK_ON
---------------- -------------------- ------------------------------ ------------------
SNAPSHOT STANDBY MOUNTED testdbms RESTORE POINT ONLY
SQL> alter database open;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
--------------------
READ WRITE
此時備庫操作：
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------------- ---------- ---------- ----------
SMITH CLERK 7902 1980-12-17 00:00:00 800 20
ALLEN SALESMAN 7698 1981-02-20 00:00:00 1600 300 30
WARD SALESMAN 7698 1981-02-22 00:00:00 1250 500 30
JONES MANAGER 7839 1981-04-02 00:00:00 2975 20
MARTIN SALESMAN 7698 1981-09-28 00:00:00 1250 1400 30
BLAKE MANAGER 7839 1981-05-01 00:00:00 2850 30
CLARK MANAGER 7839 1981-06-09 00:00:00 2450 10
SCOTT ANALYST 7566 1987-04-19 00:00:00 3000 20
KING PRESIDENT 1981-11-17 00:00:00 5000 10
TURNER SALESMAN 7698 1981-09-08 00:00:00 1500 0 30
ADAMS CLERK 7788 1987-05-23 00:00:00 1100 20
JAMES CLERK 7698 1981-12-03 00:00:00 950 30
FORD ANALYST 7566 1981-12-03 00:00:00 3000 20
MILLER CLERK 7782 1982-01-23 00:00:00 1300 10
rows selected.
SQL> truncate table scott.emp;
Table truncated.
主庫操作：
SQL> create table scott.t as select * from scott.dept;
Table created.
SQL> select * from scott.t;
DEPTNO DNAME LOC ADDR
---------- -------------- ------------- ------------------------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
備庫恢復到物理standby
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 9.4067E+10 bytes
Fixed Size 2263936 bytes
Variable Size 9663677568 bytes
Database Buffers 8.4289E+10 bytes
Redo Buffers 112766976 bytes
Database mounted.
SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY;
Database altered.
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup ;
ORACLE instance started.
Total System Global Area 9.4067E+10 bytes
Fixed Size 2263936 bytes
Variable Size 9663677568 bytes
Database Buffers 8.4289E+10 bytes
Redo Buffers 112766976 bytes
Database mounted.
Database opened.
##此時備庫的數據已經恢復到轉變snapshot standby時間點
SQL> select database_role,open_mode,db_unique_name,flashback_on from v$database;
DATABASE_ROLE OPEN_MODE DB_UNIQUE_NAME FLASHBACK_ON
---------------- -------------------- ------------------------------ ------------------
PHYSICAL STANDBY READ ONLY testdbms NO
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- ------------------- ---------- ---------- ----------
SMITH CLERK 7902 1980-12-17 00:00:00 800 20
ALLEN SALESMAN 7698 1981-02-20 00:00:00 1600 300 30
WARD SALESMAN 7698 1981-02-22 00:00:00 1250 500 30
JONES MANAGER 7839 1981-04-02 00:00:00 2975 20
MARTIN SALESMAN 7698 1981-09-28 00:00:00 1250 1400 30
BLAKE MANAGER 7839 1981-05-01 00:00:00 2850 30
CLARK MANAGER 7839 1981-06-09 00:00:00 2450 10
SCOTT ANALYST 7566 1987-04-19 00:00:00 3000 20
KING PRESIDENT 1981-11-17 00:00:00 5000 10
TURNER SALESMAN 7698 1981-09-08 00:00:00 1500 0 30
ADAMS CLERK 7788 1987-05-23 00:00:00 1100 20
JAMES CLERK 7698 1981-12-03 00:00:00 950 30
FORD ANALYST 7566 1981-12-03 00:00:00 3000 20
MILLER CLERK 7782 1982-01-23 00:00:00 1300 10
rows selected.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select * from scott.t;
DEPTNO DNAME LOC ADDR
---------- -------------- ------------- ------------------------------
ACCOUNTING NEW YORK
RESEARCH DALLAS
SALES CHICAGO
SQL> select database_role,open_mode,db_unique_name,flashback_on from v$database;
DATABASE_ROLE OPEN_MODE DB_UNIQUE_NAME FLASHBACK_ON
---------------- -------------------- ------------------------------ ------------------
PHYSICAL STANDBY READ ONLY WITH APPLY testdbms NO
(5)閃回歸檔(增加、修改、重命名、刪除表的列、truncate表、修改表的約束、以及修改分區表的分區規范)
3、閃回注意事項
(1)數據庫閃回需要在mounted下進行，并且open時需要使用resetlogs
(2)閃回DROP只能用于非系統表空間和本地管理的表空間，外鍵約束無法恢復，對方覆蓋、重命名需注意
(3)表DROP，對應的物化視圖會被徹底刪除，物化視圖不會存放在recyclebin里
(4)閃回表，如果在做過dml，然后進行了表結構修改、truncate等DDL操作，新增/刪除結構無法做閃回
(5)閃回歸檔，必須在assm管理tablespace和undo auto管理下進行
(6)注意閃回區管理，防止磁盤爆滿，閃回區空間不足等
(7)主庫做庫的閃回，會影響備庫，需要重新同步
(8)snapshot standby 不支持最高保護模式
三、備注
1、相關數據字典
V$FLASHBACK_DATABASE_LOG ##查看數據庫可閃回的時間點/SCN等信息 V$flashback_database_stat ##查看閃回日志空間記錄信息
2、常用查詢語句
(1)查看數據庫狀態
SQL> select NAME,OPEN_MODE ,DATABASE_ROLE,CURRENT_SCN,FLASHBACK_ON from v$database; NAME OPEN_MODE DATABASE_ROLE CURRENT_SCN FLASHBACK_ON ------------- -------------------- ---------------- ----------- ------------------ TESTDB READ WRITE PRIMARY 16812246 YES
(2)獲取當前數據庫的系統時間和SCN
SQL> select to_char(systimestamp,'yyyy-mm-dd HH24:MI:SS') as sysdt , dbms_flashback.get_system_change_number scn from dual; SYSDT SCN ------------------- ---------- 2017-12-14 14:28:33 16813234
(3)查看數據庫可恢復的時間點
SQL> select * from V$FLASHBACK_DATABASE_LOG; OLDEST_FLASHBACK_SCN OLDEST_FLASHBACK_TI RETENTION_TARGET FLASHBACK_SIZE ESTIMATED_FLASHBACK_SIZE -------------------- ------------------- ---------------- -------------- ------------------------ 16801523 2017-12-14 11:35:05 4320 104857600 244113408
(4)查看閃回日志空間情況
SQL> select * from V$flashback_database_stat; BEGIN_TIME END_TIME FLASHBACK_DATA DB_DATA REDO_DATA ESTIMATED_FLASHBACK_SIZE ------------------- ------------------- -------------- ---------- ---------- ------------------------ 2017-12-14 14:34:53 2017-12-14 14:56:43 1703936 9977856 1487872 0
(5)SCN和timestamp裝換關系查詢
select scn,to_char(time_dp,'yyyy-mm-dd hh24:mi:ss')from sys.smon_scn_time;
(6)查看閃回restore_point
select scn, STORAGE_SIZE ,to_char(time,'yyyy-mm-dd hh24:mi:ss') time,NAME from v$restore_point;
(7)閃回語句
a.閃回數據庫
FLASHBACK DATABASE TO TIMESTAMP to_timestamp('2017-12-14 14:28:33','yyyy-mm-dd HH24:MI:SS');;
flashback database to scn 16813234;
b.閃回DROP
其中table_name可以是刪除表名稱，也可以是別名
flashback table table_name to before drop; flashback table table_name to before drop rename to table_name_new;
c.閃回表
flashback table table_name to scn scn_number;
flashback table table_name to timestamp to_timestamp('2017-12-14 14:28:33','yyyy-mm-dd hh24:mi:ss');
d.閃回查詢
select * from table_name as of timestamp to_timestamp('2017-12-14 14:28:33','yyyy-mm-dd hh24:mi:ss');
select * from scott.dept as of scn 16801523;
e.閃回快照
create restore point before_201712151111 guarantee flashback database; flashback database to restore point before_201712151111;
(7)閃回空間爆滿問題處理
以上這篇基于Oracle閃回詳解(必看篇)就是小編分享給大家的全部內容了，希望能給大家一個參考，也希望大家多多支持腳本之家。
相關文章
Oracle開發之分析函數簡介Over用法
本文主要是對Oracle分析函數概念的簡單介紹，同時講解了Over函數的用法，希望對大家學習分析函數有所幫助。2016-05-05
Oracle查詢用戶擁有所有系統權限的方法
這篇文章主要介紹了Oracle查詢用戶擁有所有系統權限,本文通過實例代碼給大家介紹的非常詳細,感興趣的朋友一起看看吧2024-12-12
MySQL實現按分秒統計數據量方式
在MySQL中,通過使用GROUP BY結合時間處理函數,可以有效統計每秒、每分鐘、每5分鐘、每10分鐘和每30分鐘的交易量,通過對transaction_time字段進行格式化和分段,可以靈活調整統計的時間間隔,此方法適用于需要精確時間段統計的場景,如性能監控、數據分析等2024-10-10
這篇文章給大家分享了Oracle對字段的增刪改語句，對大家日常操作Oracle非常實用，有需要的可以參考借鑒。2016-08-08
本篇文章是對oracle select執行順序進行了詳細的分析介紹，需要的朋友參考下2013-05-05
如果你不小心覆蓋了之前的存儲過程，那得趕緊閃回，時長越長閃回的可能性越小，下面為大家介紹下恢復原理2014-05-05
Oracle啟用“_optimizer_skip_scan_enabled” 參數導致NC系統卡死問題解決方法
這篇文章主要介紹了Oracle啟用“_optimizer_skip_scan_enabled” 參數導致NC系統卡死問題解決方法,本文給大家介紹的非常詳細,感興趣的朋友跟隨小編一起看看吧2024-08-08
Oracle數據庫技術(38)...2007-03-03
入侵命令收集整理，方便大家學習怎么防范2008-05-05
Oracle數據庫處理多媒體信息...2007-03-03