如何配置docker官方源并用yum安裝docker

更新時間：2017年07月18日 15:04:23 作者：叫我蔣樂哥哥

本篇文章主要介紹了如何配置docker官方源并用yum安裝docker ，具有一定的參考價值，感興趣的小伙伴們可以參考一下

本文介紹了如何配置docker官方源并用yum安裝docker ，分享給大家，希望對各位有幫助

一、docker的官方安裝文檔：

https://docs.docker.com/engine/installation/linux/centos/

由docker給的文檔可以看出它也只是去配置了一個docker的yum源、然后就通過這個源來安裝docker了；在這個文檔下我們采用手工配置

的方式

二、配置一個docker用的源：

1、為docker 增加一個新的yum配置文件；touch /etc/yum.repos.d/docker.repo

touch /etc/yum.repos.d/docker.repo

2、docker.repo的內容如下

[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/stable
enabled=1
gpgcheck=0 #我把這里設置成了0、說明我信任了這個源，不對它的rpm進行檢察
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/7/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge]
name=Docker CE Edge - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-debuginfo]
name=Docker CE Edge - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-edge-source]
name=Docker CE Edge - Sources
baseurl=https://download.docker.com/linux/centos/7/source/edge
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/7/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/7/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/7/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg

三、安裝docker:

sudo yum install docker-ce
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.1.ce-1.el7.centos will be installed
--> Processing Dependency: docker-ce-selinux >= 17.03.1.ce-1.el7.centos for package: docker-ce-17.03.1.ce-1.el7.centos.x86_64
--> Running transaction check
---> Package docker-ce-selinux.noarch 0:17.03.1.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
 Package             Arch         Version                Repository            Size
=====================================================================================================================================
Installing:
 docker-ce            x86_64        17.03.1.ce-1.el7.centos        docker-ce-stable         19 M
Installing for dependencies:
 docker-ce-selinux        noarch        17.03.1.ce-1.el7.centos        docker-ce-stable         28 k

Transaction Summary
=====================================================================================================================================
Install 1 Package (+1 Dependent package)

Total download size: 19 M
Installed size: 19 M
Is this ok [y/d/N]: y

四、直接下載rpm包的方式來安裝：

1、我在安裝docker的時候發現下載的速度只有3kB/s 然而文件大小有19M；就在我感覺安裝無望的時候、我機智的想到了自己直接把rpm下載下來

看了下docker.repo 、發現centos7的源地址是 https://download.docker.com/linux/centos/7/$basearch/stable 所以我只要去

https://download.docker.com/linux/centos/7/x86_64/stable/Packages/

用迅雷(我是會員有加速)把rpm包下載下來就行了

下載如下文件：

docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm

五、安裝docker:

ll
total 19096
-rwxrwxrwx 1 jianglexing jianglexing 19521288 May 30 20:05 docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm
-rw-r--r-- 1 jianglexing jianglexing  29108 May 30 20:15 docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm
[root@workstudio docker]# yum localinstall *
Loaded plugins: fastestmirror, langpacks
Examining docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm: docker-ce-17.03.0.ce-1.el7.centos.x86_64
Marking docker-ce-17.03.0.ce-1.el7.centos.x86_64.rpm to be installed
Examining docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm: docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch
Marking docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 0:17.03.0.ce-1.el7.centos will be installed
---> Package docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================
 Package         Arch     Version             Repository                        Size
=====================================================================================================================================
Installing:
 docker-ce        x86_64    17.03.0.ce-1.el7.centos     /docker-ce-17.03.0.ce-1.el7.centos.x86_64        65 M
 docker-ce-selinux    noarch    17.03.0.ce-1.el7.centos     /docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch    43 k

Transaction Summary
=====================================================================================================================================
Install 2 Packages

Total size: 65 M
Installed size: 65 M
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
 Installing : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch                                 1/2 
setsebool: SELinux is disabled.
libsemanage.semanage_direct_install_info: Overriding docker module at lower priority 100 with module at priority 400.
 Installing : docker-ce-17.03.0.ce-1.el7.centos.x86_64                                     2/2 
 Verifying : docker-ce-17.03.0.ce-1.el7.centos.x86_64                                     1/2 
 Verifying : docker-ce-selinux-17.03.0.ce-1.el7.centos.noarch                                 2/2 

Installed:
 docker-ce.x86_64 0:17.03.0.ce-1.el7.centos          docker-ce-selinux.noarch 0:17.03.0.ce-1.el7.centos          

Complete!

六、啟動docker:

[root@workstudio docker]# systemctl start docker
[root@workstudio docker]# ps -ef | grep docker
root    4458   1 1 20:22 ?    00:00:00 /usr/bin/dockerd
root    4465  4458 0 20:22 ?    00:00:00 docker-containerd -l unix:///var/run/docker/libcontainerd/docker-containerd.sock --metrics-interval=0 --start-timeout 2m --state-dir /var/run/docker/libcontainerd/containerd --shim docker-containerd-shim --runtime docker-runc
root    4589  4333 0 20:22 pts/1  00:00:00 grep --color=auto docker

七、測試docker是否能成功運行：

[root@workstudio docker]# docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
78445dd45222: Pull complete 
Digest: sha256:c5515758d4c5e1e838e9cd307f6c6a0d620b5e07e6f927b07d05f6d12a1ac8d7
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
 3. The Docker daemon created a new container from that image which runs the
  executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
  to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://cloud.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/engine/userguide/

如下是第一次運行hello-world 這個docker-image 由于它還不存在于本地、所以要下載它、這可能要用一點時間！

以上就是本文的全部?jī)?nèi)容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。

您可能感興趣的文章: