Android getReadableDatabase() 和 getWritableDatabase()分析對比
Android getReadableDatabase() 和 getWritableDatabase()分析對比
Android使用getWritableDatabase()和getReadableDatabase()方法都可以獲取一個用于操作數據庫的SQLiteDatabase實例。(getReadableDatabase()方法中會調用getWritableDatabase()方法)
其中g(shù)etWritableDatabase() 方法以讀寫方式打開數據庫,一旦數據庫的磁盤空間滿了,數據庫就只能讀而不能寫,倘若使用的是getWritableDatabase() 方法就會出錯。
getReadableDatabase()方法則是先以讀寫方式打開數據庫,如果數據庫的磁盤空間滿了,就會打開失敗,當打開失敗后會繼續嘗試以只讀方式打開數據庫。如果該問題成功解決,則只讀數據庫對象就會關閉,然后返回一個可讀寫的數據庫對象。
源碼如下:
/**
* Create and/or open a database that will be used for reading and writing.
* Once opened successfully, the database is cached, so you can call this
* method every time you need to write to the database. Make sure to call
* {@link #close} when you no longer need it.
*
* <p>Errors such as bad permissions or a full disk may cause this operation
* to fail, but future attempts may succeed if the problem is fixed.</p>
*
* @throws SQLiteException if the database cannot be opened for writing
* @return a read/write database object valid until {@link #close} is called
*/
public synchronized SQLiteDatabase getWritableDatabase() {
if (mDatabase != null && mDatabase.isOpen() && !mDatabase.isReadOnly()) {
return mDatabase; // The database is already open for business
}
if (mIsInitializing) {
throw new IllegalStateException("getWritableDatabase called recursively");
}
// If we have a read-only database open, someone could be using it
// (though they shouldn't), which would cause a lock to be held on
// the file, and our attempts to open the database read-write would
// fail waiting for the file lock. To prevent that, we acquire the
// lock on the read-only database, which shuts out other users.
boolean success = false;
SQLiteDatabase db = null;
if (mDatabase != null) mDatabase.lock();
try {
mIsInitializing = true;
if (mName == null) {
db = SQLiteDatabase.create(null);
} else {
db = mContext.openOrCreateDatabase(mName, 0, mFactory);
}
int version = db.getVersion();
if (version != mNewVersion) {
db.beginTransaction();
try {
if (version == 0) {
onCreate(db);
} else {
onUpgrade(db, version, mNewVersion);
}
db.setVersion(mNewVersion);
db.setTransactionSuccessful();
} finally {
db.endTransaction();
}
}
onOpen(db);
success = true;
return db;
} finally {
mIsInitializing = false;
if (success) {
if (mDatabase != null) {
try { mDatabase.close(); } catch (Exception e) { }
mDatabase.unlock();
}
mDatabase = db;
} else {
if (mDatabase != null) mDatabase.unlock();
if (db != null) db.close();
}
}
}
/**
* Create and/or open a database. This will be the same object returned by
* {@link #getWritableDatabase} unless some problem, such as a full disk,
* requires the database to be opened read-only. In that case, a read-only
* database object will be returned. If the problem is fixed, a future call
* to {@link #getWritableDatabase} may succeed, in which case the read-only
* database object will be closed and the read/write object will be returned
* in the future.
*
* @throws SQLiteException if the database cannot be opened
* @return a database object valid until {@link #getWritableDatabase}
* or {@link #close} is called.
*/
public synchronized SQLiteDatabase getReadableDatabase() {
if (mDatabase != null && mDatabase.isOpen()) {
return mDatabase; // The database is already open for business
}
if (mIsInitializing) {
throw new IllegalStateException("getReadableDatabase called recursively");
}
try {
return getWritableDatabase();
} catch (SQLiteException e) {
if (mName == null) throw e; // Can't open a temp database read-only!
Log.e(TAG, "Couldn't open " + mName + " for writing (will try read-only):", e);
}
SQLiteDatabase db = null;
try {
mIsInitializing = true;
String path = mContext.getDatabasePath(mName).getPath();
db = SQLiteDatabase.openDatabase(path, mFactory, SQLiteDatabase.OPEN_READONLY);
if (db.getVersion() != mNewVersion) {
throw new SQLiteException("Can't upgrade read-only database from version " +
db.getVersion() + " to " + mNewVersion + ": " + path);
}
onOpen(db);
Log.w(TAG, "Opened " + mName + " in read-only mode");
mDatabase = db;
return mDatabase;
} finally {
mIsInitializing = false;
if (db != null && db != mDatabase) db.close();
}
}
感謝閱讀,希望能幫助到大家,謝謝大家對本站的支持!
相關文章
Android編程之Application設置全局變量及傳值用法實例分析
這篇文章主要介紹了Android編程之Application設置全局變量及傳值用法,結合實例形式較為詳細的分析了全局變量及傳值的相關技巧,具有一定參考借鑒價值,需要的朋友可以參考下2015-12-12
Android 7.0系統webview 顯示https頁面空白處理方法
今天小編就為大家分享一篇Android 7.0系統webview 顯示https頁面空白處理方法,具有很好的參考價值,希望對大家有所幫助。一起跟隨小編過來看看吧2018-07-07
Ubuntu 14.04下創建Genymotion安卓虛擬機的步驟詳解
Android 模擬器一直以速度奇慢無比著稱,基本慢到不可用。本文介紹我一直在用的 Genymotion,速度不亞于真機。而且功能齊全,使用簡單。下面這篇文章主要介紹了Ubuntu 14.04下創建Genymotion虛擬機的步驟,需要的朋友可以參考下。2017-03-03

